Download or read book Overview of Nuclear Power Plant Equipment Qualification Issues and Practices written by Canada. Atomic Energy Control Board and published by . This book was released on 1989 with total page 79 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Equipment Qualification in Operational Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 1998 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report is based on information presented at two IAEA Technical Committee meetings held within the framework of the IAEA Project on Operational Safety Guidance in 1993 and 1994. The document was prepared to provide guidance to Member States in assessing the status of equipment qualification (EQ) in operational nuclear power plants and in preserving this status. It offers methods and practices for activities which are necessary for a successful implementation of periodical safety reviews. The report should be of value for all countries that are parties to the Convention on Nuclear Safety, which entered into force on 24 October 1996 and stipulates the review and, where necessary, the upgrading of the safety of existing nuclear installations.
Download or read book Seismic Design and Qualification for Nuclear Power Plants written by International Atomic Energy Agency and published by IAEA. This book was released on 2003 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide provides recommendations on a generally accepted way to design a nuclear power plant so that an earthquake motion at the site will not jeopardize the safety of the plant. It also gives guidance on a consistent application of methods and procedures for analysis, testing and qualification of structures and equipment so that they meet the safety requirements covering the design of nuclear power plants, safety assessments for the design and the regulatory issues concerned with the licensing of plants.
Download or read book Equipment Qualification for Nuclear Installations written by IAEA and published by International Atomic Energy Agency. This book was released on 2021-12-09 with total page 73 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide provides recommendations on a structured approach to the establishment and preservation of equipment qualification in nuclear installations, to confirm reliable performance of safety functions by such equipment during operational states and accident conditions, to avoid vulnerability due to common cause failure of the equipment. It applies primarily to equipment that performs one or more safety functions, but it may also be applied to items not important to safety, in accordance with national requirements. The qualification process covers electrical, instrumentation and control, and active mechanical equipment, and components associated with it, for example, seals, gaskets, lubricants, cables, connections, and mounting/anchoring structures. The qualification process for passive mechanical components for which the safety performance is assured by design in accordance with applicable codes, is outside the scope of this publication. The recommendations in this Safety Guide apply to new nuclear installations, and as far as is reasonably practicable to existing nuclear installations.
Download or read book Nuclear Power Plant Equipment Qualification Reference Manual written by Philip M. Holzman and published by . This book was released on 1992 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Compilation of Qualification Considerations for Nuclear Power Generation Stations written by and published by . This book was released on 1977 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrical Systems for Nuclear Power Plants written by Dr. Omar S. Mazzoni and published by John Wiley & Sons. This book was released on 2018-10-30 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers all aspects of electrical systems for nuclear power plants written by an authority in the field Based on author Omar Mazzoni's notes for a graduate level course he taught in Electrical Engineering, this book discusses all aspects of electrical systems for nuclear power plants, making reference to IEEE nuclear standards and regulatory documents. It covers such important topics as the requirements for equipment qualification, acceptance testing, periodic surveillance, and operational issues. It also provides excellent guidance for students in understanding the basis of nuclear plant electrical systems, the industry standards that are applicable, and the Nuclear Regulatory Commission's rules for designing and operating nuclear plants. Electrical Systems for Nuclear Power Plants offers in-depth chapters covering: elements of a power system; special regulations and requirements; unique requirements of a Class 1E power system; nuclear plants containment electrical penetration assemblies; on-site emergency AC sources; on-site emergency DC sources; protective relaying; interface of the nuclear plant with the grid; station blackout (SBO) issues and regulations; review of electric power calculations; equipment aging and decommissioning; and electrical and control systems inspections. This valuable resource: Evaluates industry standards and their relationship to federal regulations Discusses Class 1E equipment, emergency generation, the single failure criterion, plant life, and plant inspection Includes exercise problems for each chapter Electrical Systems for Nuclear Power Plants is an ideal text for instructors and students in electrical power courses, as well as for engineers active in operating nuclear power plants.
Download or read book A Guide to Qualification of Electrical Equipment for Nuclear Power Plants written by and published by . This book was released on 1983 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Research on U S Nuclear Power Plant Major Equipment Aging written by James T. Nakos and published by . This book was released on 1994 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Department of Energy (DOE) and the Electric Power Research Institute (EPRI), in cooperation with nuclear power plant utilities and the Nuclear Energy Institute, have prepared equipment aging evaluations of nuclear power plant equipment for life extension considerations. Specifically, these evaluations focused on equipment considered important for plant license renewal (U.S. Code of Federal Regulations 10CFR54). [open-quotes]Industry Reports[close-quotes] (IRs), jointly funded by DOE and EPRI, evaluated the aging of major systems, structures, and components (e.g., reactor pressure vessels, Class I structures, PWR and BWR containments, etc.) and contain a mixture of technical and licensing information. [open-quotes]Aging Management Guidelines[close-quotes] (AMGs), funded by DOE, evaluate aging for commodity types of equipment (e.g., pumps, electrical switchgear, heat exchangers, etc.) and concentrate on technical issues only. AMGs are intended for systems engineers and plant maintenance staff. A significant number of technical issues were resolved during IR interactions with the U.S. Nuclear Regulatory Commission (NRC). However, certain technical issues have not been resolved and are considered [open-quotes]open[close-quotes]. Examples include certain issues related to fatigue, neutron irradiation embrittlement, intergranular stress corrosion cracking (IGSCC) and electrical cable equipment qualification. Direct NRC interaction did not take place during preparation of individual AMGs due to their purely technical nature. The eventual use of AMGs in a future license renewal application will likely require NRC interaction at that time. With a few noted exceptions, the AMG process indicated that current aging management practices of U.S. utilities were effective in preventing age-related degradation. This paper briefly describes the IR and AMG processes and summarizes the unresolved technical issues identified through preparation of the documents.
Download or read book NUREG CR written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1977 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Systematic Approach to Training for Nuclear Facility Personnel Processes Methodology and Practices written by IAEA and published by International Atomic Energy Agency. This book was released on 2021-05-18 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: Training is an important tool to achieve and maintain the required competence of personnel working in nuclear facilities. Effective training and qualification of personnel are necessary for the achievement of high safety and efficiency standards in nuclear facility performance. Training and qualification combined is a key feature of the integrated management systems of nuclear facilities. It is these considerations that led to this publication which consolidates the experience gained worldwide using the systematic approach to training (SAT) for nuclear facility personnel. It provides a basis for establishing and sustaining the quality and reliability of training and qualification for all main categories of nuclear facility personnel. SAT has proved its effectiveness in nuclear and other safety critical industries over decades and is recognized as the best international practice in nuclear training. The publication details the processes and methodology, presents good practices and offers recommendations from the experts in the field on the entire set of activities within the SATbased training methodology and provides examples of SAT application. It builds on, and supersedes, guidance provided in an earlier IAEA publication (Technical Report Series 380, Nuclear Power Plant Personnel Training and its Evaluation: A Guidebook). A key feature of this publication is demonstrating how SATbased training serves as one of the important processes in a nuclear facility management system and how it integrates with other processes.
Download or read book Safety of Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.
Download or read book Ageing Management for Nuclear Fuel Cycle Facilities written by IAEA and published by International Atomic Energy Agency. This book was released on 2023-05-22 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ageing of structures, systems and components is one of the major challenges faced by nuclear fuel cycle facilities worldwide. This publication is intended to provide information on methods, approaches, practices and strategies for ageing management of nuclear fuel cycle facilities. It provides practical information on the establishment of effective ageing management programmes for nuclear fuel cycle facilities in the operational stage and on ageing management considerations in different stages in the lifetime of a nuclear fuel cycle facility. It also addresses the interface of ageing management with other technical areas and programmes, including maintenance, periodic testing and inspection, equipment qualification and configuration management. Best practice examples on how Member States are addressing ageing issues in nuclear fuel cycle facilities are also provided in this publication.
Download or read book Recruitment Qualification and Training of Personnel for Nuclear Power Plants written by IAEA and published by International Atomic Energy Agency. This book was released on 2022-10-12 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide identifies the main objectives and responsibilities of the operating organization for the recruitment, qualification and training of personnel for new and existing nuclear power plants to establish and maintain a high level of competence of personnel and to ensure safe operation of the nuclear power plant. This publication can also be used as a guide for the recruitment, training and qualification of personnel for nuclear installations other than nuclear power plants.
Download or read book Technical Basis for Environmental Qualification of Microprocessor based Safety related Equipment in Nuclear Power Plants written by and published by . This book was released on 1998 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document presents the results of studies sponsored by the Nuclear Regulatory Commission (NRC) to provide the technical basis for environmental qualification of computer-based safety equipment in nuclear power plants. The studies were conducted by Oak Ridge National Laboratory (ORNL), Sandia National Laboratories (SNL), and Brookhaven National Laboratory (BNL). The studies address the following: (1) adequacy of the present test methods for qualification of digital I and C systems; (2) preferred (i.e., Regulatory Guide-endorsed) standards; (3) recommended stressors to be included in the qualification process during type testing; (4) resolution of need for accelerated aging for equipment to be located in a benign environment; and (5) determination of an appropriate approach for addressing the impact of smoke in digital equipment qualification programs. Significant findings from the studies form the technical basis for a recommended approach to the environmental qualification of microprocessor-based safety-related equipment in nuclear power plants.
Download or read book NRC Regulatory Guides written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1973 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compilation of currently available electronic versions of NRC regulatory guides.
Download or read book Qualification of Active Mechanical Equipment Used in Nuclear Power Plants written by American Society of Mechanical Engineers and published by . This book was released on 1990 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
