Download or read book Output Based Optimal Placement of Actuators and Sensors for Active Vibration and Structural Acoustic Control written by Barry J. Dunn and published by . This book was released on 1997 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optimization Strategies for Sensor and Actuator Placement written by Sharon L. Padula and published by . This book was released on 1999 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper provides a survey of actuator and sensor placement problems from a wide range of engineering disciplines and a variety of applications. Combinatorial optimization methods are recommended as a means for identifying sets of actuators and sensors that maximize performance. Several sample applications from NASA Langley Research Center such as active structural acoustic control are covered in detail. Laboratory and flight tests of these applications indicate that actuator and sensor placement methods are effective and important. Lessons learned in solving these optimization problems can guide future research.
Download or read book Responsive Systems for Active Vibration Control written by A. Preumont and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural vibrations have become the critical factor limiting the performance of many engineering systems, typical amplitudes ranging from meters to a few nanometers. Many acoustic nuisances in transportation systems and residential and office buildings are also related to structural vibrations. The active control of such vibrations involves nine orders of magnitude of vibration amplitude, which exerts a profound influence on the technology. Active vibration control is highly multidisciplinary, involving structural vibration, acoustics, signal processing, materials science, and actuator and sensor technology. Chapters 1-3 of this book provide a state-of-the-art introduction to active vibration control, active sound control, and active vibroacoustic control, respectively. Chapter 4 discusses actuator/sensor placement, Chapter 5 deals with robust control of vibrating structures, Chapter 6 discusses finite element modelling of piezoelectric continua and Chapter 7 addresses the latest trends in piezoelectric multiple-degree-of-freedom actuators/sensors. Chapters 8-12 deal with example applications, including semi-active joints, active isolation and health monitoring. Chapter 13 addresses MEMS technology, while Chapter 14 discusses the design of power amplifiers for piezoelectric actuators.
Download or read book Control of Noise and Structural Vibration written by Qibo Mao and published by Springer Science & Business Media. This book was released on 2013-06-02 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of Noise and Structural Vibration presents a MATLAB®-based approach to solving the problems of undesirable noise generation and transmission by structures and of undesirable vibration within structures in response to environmental or operational forces. The fundamentals of acoustics, vibration and coupling between vibrating structures and the sound fields they generate are introduced including a discussion of the finite element method for vibration analysis. Following this, the treatment of sound and vibration control begins, illustrated by example systems such as beams, plates and double walls. Sensor and actuator placement is explained as is the idea of modal sensor–actuators. The design of appropriate feedback systems includes consideration of basic stability criteria and robust active structural acoustic control. Positive position feedback (PPF) and multimode control are also described in the context of loudspeaker–duct and loudspeaker–microphone models. The design of various components is detailed including the analog circuit for PPF, adaptive (semi-active) Helmholtz resonators and shunt piezoelectric circuits for noise and vibration suppression. The text makes extensive use of MATLAB® examples and these can be simulated using files available for download from the book’s webpage at springer.com. End-of-chapter exercises will help readers to assimilate the material as they progress through the book. Control of Noise and Structural Vibration will be of considerable interest to the student of vibration and noise control and also to academic researchers working in the field. It’s tutorial features will help practitioners who wish to update their knowledge with self-study.
Download or read book Optimal Sensor actuator Placement and Switching Schemes for Control of Flexible Structures written by Raffaele Potami and published by . This book was released on 2008 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract (Partial): The vibration control problem for flexible structures is examined within the context of overall controller performance and power reduction. First, the issue of optimal sensor and actuator placement is considered along with its associated control robustness aspects. Then the option of alternately activating subsets of the available devices is investigated. Such option is considered in order to better address the effects of spatiotemporally varying disturbances acting on a flexible structure while reducing the overall energy consumption. Towards the solution to the problem of optimal device placement, three different approaches are proposed. First, a computationally efficient scheme for the simultaneous placement of multiple devices is presented. The second approach proposes a strategy for the optimal placement of sensors and collocated sensor/actuator pairs, taking into account the influence of the spatial distribution of disturbances. The third approach provides a solution to the actuator location problem by incorporating considerations with respect to preferred spatial regions within the flexible structure.
Download or read book Active Control of Noise and Vibration written by Colin Hansen and published by CRC Press. This book was released on 1996-11-21 with total page 1292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This major work is the first to treat the active control of both sound and vibration in a unified way. It outlines the fundamental concepts, explains how a reliable and stable system can be designed and implemented, and details the pitfalls . It covers sound in ducts, sound radiation, sound transmission into enclosures, structural vibration and isolation, electronic control system design, and sensors and actuators.
Download or read book Piezoceramic Actuator Placement for Acoustic Control of Panels written by Jeffrey S. Bevan and published by . This book was released on 2001 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimum placement of multiple traditional piezoceramic actuators is determined for active structural acoustic control of flat panels. The structural acoustic response is determined using acoustic radiation filters and structural surface vibration characteristics. Linear Quadratic Regulator (LQR) control is utilized to determine the optimum state feedback gain for active structural acoustic control. The optimum actuator location is determined by minimizing the structural acoustic radiated noise using a modified genetic algorithm. Experimental tests are conducted and compared to analytical results. Anisotropic piezoceramic actuators exhibits enhanced performance when compared to traditional isotropic piezoceramic actuators. As a result of the inherent isotropy, these advanced actuators develop strain along principal material axis. The orientation of anisotropic actuators is investigated on the effect of structural vibration and acoustic control of curved and flat panels.
Download or read book Smart Actuation and Sensing Systems written by Giovanni Berselli and published by BoD – Books on Demand. This book was released on 2012-10-17 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of the present book, which tries to summarize in an edited format and in a fairly comprehensive manner, many of the recent technical research accomplishments in the area of Smart Actuators and Smart Sensors, is to combine researchers and scientists from different fields into a single virtual room. The book hence reflects the multicultural nature of the field and will allow the reader to taste and appreciate different points of view, different engineering methods and different tools that must be jointly considered when designing and realizing smart actuation and sensing systems.
Download or read book Optimization Strategies for Sensor and Actuator Placement written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2018-09-25 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper provides a survey of actuator and sensor placement problems from a wide range of engineering disciplines and a variety of applications. Combinatorial optimization methods are recommended as a means for identifying sets of actuators and sensors that maximize performance. Several sample applications from NASA Langley Research Center, such as active structural acoustic control, are covered in detail. Laboratory and flight tests of these applications indicate that actuator and sensor placement methods are effective and important. Lessons learned in solving these optimization problems can guide future research. Padula, Sharon L. and Kincaid, Rex K. Langley Research Center NASA/TM-1999-209126, L-17839, NAS 1.15:209126
Download or read book Piezoceramic Actuator Placement for Acoustic Control of Panels written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-15 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimum placement of multiple traditional piezoceramic actuators is determined for active structural acoustic control of flat panels. The structural acoustic response is determined using acoustic radiation filters and structural surface vibration characteristics. Linear Quadratic Regulator (LQR) control is utilized to determine the optimum state feedback gain for active structural acoustic control. The optimum actuator location is determined by minimizing the structural acoustic radiated noise using a modified genetic algorithm. Experimental tests are conducted and compared to analytical results. Anisotropic piezoceramic actuators exhibits enhanced performance when compared to traditional isotropic piezoceramic actuators. As a result of the inherent isotropy, these advanced actuators develop strain along the principal material axis. The orientation of anisotropic actuators is investigated on the effect of structural vibration and acoustic control of curved and flat panels. A fully coupled shallow shell finite element formulation is developed to include anisotropic piezoceramic actuators for shell structures. Bevan, Jeffrey S. and Turner, Travis L. (Technical Monitor) Langley Research Center NAG1-2141; RTOP 538-03-14-01
Download or read book Control of Noise and Structural Vibration written by Mao Qibo and published by Springer. This book was released on 2013-06-04 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of Noise and Structural Vibration presents a MATLAB®-based approach to solving the problems of undesirable noise generation and transmission by structures and of undesirable vibration within structures in response to environmental or operational forces. The fundamentals of acoustics, vibration and coupling between vibrating structures and the sound fields they generate are introduced including a discussion of the finite element method for vibration analysis. Following this, the treatment of sound and vibration control begins, illustrated by example systems such as beams, plates and double walls. Sensor and actuator placement is explained as is the idea of modal sensor–actuators. The design of appropriate feedback systems includes consideration of basic stability criteria and robust active structural acoustic control. Positive position feedback (PPF) and multimode control are also described in the context of loudspeaker–duct and loudspeaker–microphone models. The design of various components is detailed including the analog circuit for PPF, adaptive (semi-active) Helmholtz resonators and shunt piezoelectric circuits for noise and vibration suppression. The text makes extensive use of MATLAB® examples and these can be simulated using files available for download from the book’s webpage at springer.com. End-of-chapter exercises will help readers to assimilate the material as they progress through the book. Control of Noise and Structural Vibration will be of considerable interest to the student of vibration and noise control and also to academic researchers working in the field. It’s tutorial features will help practitioners who wish to update their knowledge with self-study.
Download or read book Optimal Placement of Actuators and Sensors in Control Augmented Structural Optimization written by Abdon Eduardo Sepulveda and published by . This book was released on 1990 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Active Control of Vibration written by Christopher C. Fuller and published by Academic Press. This book was released on 1996-02-08 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a companion text to Active Control of Sound by P.A. Nelson and S.J. Elliott, also published by Academic Press. It summarizes the principles underlying active vibration control and its practical applications by combining material from vibrations, mechanics, signal processing, acoustics, and control theory. The emphasis of the book is on the active control of waves in structures, the active isolation of vibrations, the use of distributed strain actuators and sensors, and the active control of structurally radiated sound. The feedforward control of deterministic disturbances, the active control of structural waves and the active isolation of vibrations are covered in detail, as well as the more conventional work on modal feedback. The principles of the transducers used as actuateors and sensors for such control strategies are also given an in-depth description. The reader will find particularly interesting the two chapters on the active control of sound radiation from structures: active structural acoustic control. The reason for controlling high frequency vibration is often to prevent sound radiation, and the principles and practical application of such techniques are presented here for both plates and cylinders. The volume is written in textbook style and is aimed at students, practicing engineers, and researchers. Combines material from vibrations, signal processing, mechanics, and controls Summarizes new research in the field
Download or read book IUTAM Symposium on Smart Structures and Structronic Systems written by Ulrich Gabbert and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the IUTAM Symposium on Smart Structures and Structronic Systems, held in Magdeburg, Germany, 26-29 September 2000
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1985 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optimal Placement of Actuators and Sensors for Vibration Control Using Genetic Algorithms written by Robert Walter Szczepanski and published by . This book was released on 2001 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 15th International Ship and Offshore Structures Congress written by A.E Mansour and published by Elsevier. This book was released on 2003-06-26 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: KEY FEATURES: Provides researchers in Ocean engineering with a thorough review of the latest research in the field Lengthy reports by leading experts A valuable resource for all interested in ocean engineering DESCRIPTION: The International Ship and Offshore Congress (ISSC) is a forum for the exchange of information by experts undertaking and applying marine structural research. These three volumes contain the eight technical committee reports, six Specialist Committee and 2 Special Task Committee reports which were presented for the 15th International Ship and Offshore Structures Congress (ISSC 2004) in San Diego USA, between 11th and 15th August 2003. Volume III will be published in 2004 and is to contain the discussion of the reports, the chairmen's reply, the text of the invited Lecture and the congress report of ISSC 2003.
