Download or read book Organic Electronics on Micro and Nano Fibers written by and published by . This book was released on 2008 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Functionalized Nanofibers written by Kalim Deshmukh and published by Elsevier. This book was released on 2023-04-19 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt: Functionalized Nanofibers: Synthesis and Industrial Applications presents the latest advances in the fabrication, design, processing, and properties of functionalized nanofibers for a range of advanced applications. Sections introduce fabrication, mechanisms, and design of functionalized nanofibers, explaining electrospinning and non-electrospinning techniques, optimization of structural designs, surface functionalization techniques, and characterization methods. Subsequent sections focus on specific application areas, highlighting preparation methods and applications of functionalized nanofibers across biomedicine, surfaces and coatings, food, environment, energy, electronics, and textiles. Finally, environmental impact and safety and legal aspects related to the utilization of functionalized nanofibers are considered. This is a valuable resource for researchers and advanced students with an interest in nanomaterials and nanotechnology, and across other disciplines such as polymer science, chemistry, chemical engineering, and materials science and engineering. - Integrates discussions of physics, chemistry, biology and materials science behind functionalized nanofibers - Opens the door to a range of applications across biomedicine, surfaces and coatings, food, environment, energy, electronics and textiles - Analyzes challenges and opportunities relating to environmental, health and safety issues

Download or read book Polymers in Organic Electronics written by Sulaiman Khalifeh and published by Elsevier. This book was released on 2020-04-01 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers in Organic Electronics: Polymer Selection for Electronic, Mechatronic, and Optoelectronic Systems provides readers with vital data, guidelines, and techniques for optimally designing organic electronic systems using novel polymers. The book classifies polymer families, types, complexes, composites, nanocomposites, compounds, and small molecules while also providing an introduction to the fundamental principles of polymers and electronics. Features information on concepts and optimized types of electronics and a classification system of electronic polymers, including piezoelectric and pyroelectric, optoelectronic, mechatronic, organic electronic complexes, and more. The book is designed to help readers select the optimized material for structuring their organic electronic system.Chapters discuss the most common properties of electronic polymers, methods of optimization, and polymeric-structured printed circuit boards. The polymeric structures of optoelectronics and photonics are covered and the book concludes with a chapter emphasizing the importance of polymeric structures for packaging of electronic devices. - Provides key identifying details on a range of polymers, micro-polymers, nano-polymers, resins, hydrocarbons, and oligomers - Covers the most common electrical, electronic, and optical properties of electronic polymers - Describes the underlying theories on the mechanics of polymer conductivity - Discusses polymeric structured printed circuit boards, including their rapid prototyping and optimizing their polymeric structures - Shows optimization methods for both polymeric structures of organic active electronic components and organic passive electronic components

Download or read book Fundamentals and Applications of Micro and Nanofibers written by Alexander L. Yarin and published by Cambridge University Press. This book was released on 2014-05-08 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive exposition of micro and nanofiber forming, this text provides a unified framework of all these processes (melt and solution blowing, electrospinning, and so on) and describes their foundations, development and applications. It provides an up-to-date, in-depth physical and mathematical treatment, and discusses a wide variety of applications in different fields, including nonwovens, energy, healthcare and the military. It further highlights the challenges and outstanding issues from an interdisciplinary perspective of science and technology, incorporating both fundamentals and applications. Ideal for researchers, engineers and graduate students interested in the formation of micro and nanofibers and their use in functional smart materials.

Download or read book Solution based Assembly of Conjugated Polymers Into Nanofibers for Organic Electronics written by Daniel E. Acevedo Cartagena and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Solution-based crystallization of conjugated polymers offers a scalable and attractive route to develop hierarchical structures for electronic devices. The introduction of well-defined nucleation sites into metastable solutions provides a way to regulate the crystallization behavior, and therefore the morphology of the material. A crystallization method for generating metastable solutions of poly(3-hexylthiophene) (P3HT) was established. These metastable solutions allow P3HT to selectively crystallize into nanofibers (NFs) on graphene-coated surfaces. It was found that the crystallization kinetics is faster with increasing P3HT molecular weight and concentration. Through in situ atomic force microscopy, it was confirmed that NFs grow vertically in a face-on chain orientation (i.e., the [pi] orbitals parallel to the substrate normal) from highly oriented pyrolytic graphite and graphene. Moreover, the P3HT crystal structure observed on the surface of graphene was identified to be the same one formed by solution crystallization. However, as confirmed by X-ray scattering and scanning electron microscopy the crystals transitioned from face-on to edge-on orientation (i.e., the [pi] orbitals perpendicular to the substrate normal) as the film grew thicker. As determined by X-ray scattering. the initial face-on conformation was partially preserved by embedding the P3HT structures in an indene C60 bisadduct matrix when compared to pristine P3HT films. The resulting organic field effect transistors had hole mobilities ([mu] = 20 x 10-3 cm2 V-1 s-1) two orders of magnitude higher than the devices fabricated from spin casted P3HT ([mu] = 0.9 x 10-3 cm2 V-1 s-1). The solution-processable fabrication of electrodes and semiconductors is potentially scalable and amenable to roll-to-roll manufacturing.

Download or read book Polymer Nanofibers written by Dario Pisignano and published by Royal Society of Chemistry. This book was released on 2013-05-24 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research into polymer nanofibers has increased significantly over the last decade, prompting the need for a comprehensive monograph examining the subject as knowledge of their properties and potential applications has increased. Postgraduate students and researchers new to the field will benefit from the "from materials to applications" approach to the book, which examines the physio-chemical properties in detail, demonstrating how they can be exploited for a diverse range of applications, including the production of light and wound dressings. Techniques for the fabrication, notably electrospinning, are discussed at length. This book provides a unique and accessible source of information, summarising the last decade of the field and presenting an entry point for those entering the field and an inspiration to established workers. The author is currently the national coordinator for several research projects examining the applications of polymer nanofibers, alongside active international collaborations.

Download or read book Nanofibers of Conjugated Polymers written by A. Sezai Sarac and published by CRC Press. This book was released on 2017-03-27 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conjugated polymer composites with high dielectric constants are being developed by the electronics industry in response to the need for power-grounded decoupling to secure the integrity of high-speed signals and to reduce electromagnetic interference. Electrically conducting polymers are materials that simultaneously possess the physical and chemical properties of organic polymers and the electronic characteristics of metals. Multifunctional micro- and nanostructures of conjugated polymers, such as of pyrrole, have received great attention in recent years because they can polymerize easily and have high conductivity and good thermal stability. They, however, have some disadvantages such as brittleness and hard processability, which can be overcome by developing their nanocomposites. Nanofiber materials with different dielectric properties can be made from conjugated polymer composites and used in the electronics industry, in sensors and batteries, for electrical stimulation to enhance nerve-regeneration process, and for constructing scaffolds for nerve tissue engineering. Electrospinning is a versatile technique that is used to produce ultrathin continuous fibers with high surface-to-volume and aspect ratios from a variety of materials, including polymers, composites, and ceramics. Conductive materials in fibrillar shape may be advantageous compared with films because of their inherent properties such as anisotropy, high surface area, and mechanical strength. They are of particular interest in electroactive composites as they can be efficiently distributed in an insulating polymer matrix to improve both electrical and mechanical properties. Combination of electrical properties with good mechanical performance is of particular interest in electroactive polymer technology. This book covers the general aspects of electrospinning and discusses the fundamental concepts that can be used to produce nanofibers with the help of mathematical models and equations. It also details the methods through which different polymeric structures can be included in conjugated polymers during electrospinning to form composites or blends of conjugated polymer nanofibers.

Download or read book Micro and Nanophotonic Technologies written by Patrick Meyrueis and published by John Wiley & Sons. This book was released on 2017-03-20 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited and authored by leading experts from top institutions in Europe, the US and Asia, this comprehensive overview of micro- and nanophotonics covers the physical and chemical fundamentals, while clearly focusing on the technologies and applications in industrial R&D. As such, the book reports on the four main areas of telecommunications and display technologies; light conversion and energy generation; light-based fabrication of materials; and micro- and nanophotonic devices in metrology and control.

Download or read book Integration Techniques for Micro Nanostructure based Large Area Electronics written by Carlos García Núñez and published by Cambridge University Press. This book was released on 2018-11-08 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced nanostructured materials such as organic and inorganic micro/nanostructures are excellent building blocks for electronics, optoelectronics, sensing, and photovoltaics because of their high-crystallinity, long aspect-ratio, high surface-to-volume ratio, and low dimensionality. However, their assembly over large areas and integration in functional circuits are a matter of intensive investigation. This Element provides detailed description of various technologies to realize micro/nanostructures based large-area electronics (LAE) devices on rigid or flexible/stretchable substrates. The first section of this Element provides an introduction to the state-of-the-art integration techniques used to fabricate LAE devices based on different kind of micro/nanostructures. The second section describes inorganic and organic micro/nanostructures, including most common and promising synthesis procedures. In the third section,different techniques are explained that have great potential for integration of micro/nanostructures over large areas. Finally, the fourth section summarizes important remarks about LAE devices based on micro/nanostructures, and future directions.

Download or read book Micromanufacturing Engineering and Technology written by Yi Qin and published by William Andrew. This book was released on 2010-07-02 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micromanufacturing Engineering and Technology presents applicable knowledge of technology, equipment and applications, and the core economic issues of micromanufacturing for anyone with a basic understanding of manufacturing, material, or product engineering. It explains micro-engineering issues (design, systems, materials, market and industrial development), technologies, facilities, organization, competitiveness, and innovation with an analysis of future potential. The machining, forming, and joining of miniature / micro-products are all covered in depth, covering: grinding/milling, laser applications, and photo chemical etching; embossing (hot & UV), injection molding and forming (bulk, sheet, hydro, laser); mechanical assembly, laser joining, soldering, and packaging. - Presents case studies, material and design considerations, working principles, process configurations, and information on tools, equipment, parameters and control - Explains the many facets of recently emerging additive / hybrid technologies and systems, incl: photo-electric-forming, liga, surface treatment, and thin film fabrication - Outlines system engineering issues pertaining to handling, metrology, testing, integration and software - Explains widely used micro parts in bio / medical industry, information technology and automotive engineering - Covers technologies in high demand, such as: micro-mechanical-cutting, lasermachining, micro-forming, micro-EDM, micro-joining, photo-chemical-etching, photo-electro-forming, and micro-packaging

Download or read book Sustainable Strategies in Organic Electronics written by Assunta Marrocchi and published by Woodhead Publishing. This book was released on 2022-02-02 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Strategies in Organic Electronics reviews green materials and devices, sustainable processes in electronics, and the reuse, recycling and degradation of devices. Topics addressed include large-scale synthesis and fabrication of safe device materials processes that neither use toxic reagents, solvents or produce toxic by-products. Emerging opportunities such as new synthetic approaches for enabling the commercialization of pi-conjugated polymer-based devices are explored, along with new efforts towards incorporating materials from renewable resources for a low carbon footprint. Finally, the book discusses the latest advances towards device biodegradability and recycling. It is suitable for materials scientists and engineers, chemists, physicists in academia and industry. - Discusses emerging opportunities for green materials, synthesis and fabrication of organic electronics - Reviews the challenges of integration of sustainable strategies in large-scale manufacturing of organic electronics - Provides an overview of green materials and solvents that can be used as alternatives to toxic materials for organic electronics applications

Download or read book Proceedings of the International Conference on Interdisciplinary Research in Electronics and Instrumentation Engineering 2015 written by Kokula Krishna Hari Kunasekaran and published by Association of Scientists, Developers and Faculties (ASDF). This book was released on 2015-08-11 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the International Conference on Interdisciplinary Research in Electronics and Instrumentation Engineering 2015 (ICIREIE)

Download or read book Electrospinning Nanofabrication and Applications written by Bin Ding and published by William Andrew. This book was released on 2018-11-12 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrospinning: Nanofabrication and Applications presents an overview of the electrospinning technique, nanofabrication strategies and potential applications. The book begins with an introduction to the fundamentals of electrospinning, discussing fundamental principles of the electrospinning process, controlling parameters, materials and structures. Nanofabrication strategies, including coaxial electrospinning, multi-needle electrospinning, needleless electrospinning, electro-netting, near-field electrospinning, and three-dimensional macrostructure assembling are also covered. Final sections explore the applications of electrospun nanofibers in different fields and future prospects. This is a valuable reference for engineers and materials scientist working with fibrous materials and textiles, as well as researchers in the areas of nanotechnology, electrospinning, nanofibers and textiles. - Explores controllable fabrication of electrospun nanomaterials and their multifunctional applications - Explains the electrospinning technique as used in nanofabrication and nanofibers - Outlines the applications of electrospun nanofibrous materials in tissue engineering, filtration, oil-water separation, water treatment, food technology, supercapacitors, sensors and so on

Download or read book Polymer Nanofibers written by Dario Pisignano and published by Royal Society of Chemistry. This book was released on 2013 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research into polymer nanofibers has increased significantly over the last decade, prompting the need for a comprehensive monograph examining the subject as knowledge of their properties and potential applications has increased. Postgraduate students and researchers new to the field will benefit from the "from materials to applications" approach to the book, which examines the physio-chemical properties in detail, demonstrating how they can be exploited for a diverse range of applications, including the production of light and wound dressings. Techniques for the fabrication, notably electrospinning, are discussed at length. This book provides a unique and accessible source of information, summarising the last decade of the field and presenting an entry point for those entering the field and an inspiration to established workers. The author is currently the national coordinator for several research projects examining the applications of polymer nanofibers, alongside active international collaborations.

Download or read book Electrospun Nanofibers written by Mehdi Afshari and published by Woodhead Publishing. This book was released on 2016-09-13 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrospun Nanofibers covers advances in the electrospinning process including characterization, testing and modeling of electrospun nanofibers, and electrospinning for particular fiber types and applications. Electrospun Nanofibers offers systematic and comprehensive coverage for academic researchers, industry professionals, and postgraduate students working in the field of fiber science. Electrospinning is the most commercially successful process for the production of nanofibers and rising demand is driving research and development in this field. Rapid progress is being made both in terms of the electrospinning process and in the production of nanofibers with superior chemical and physical properties. Electrospinning is becoming more efficient and more specialized in order to produce particular fiber types such as bicomponent and composite fibers, patterned and 3D nanofibers, carbon nanofibers and nanotubes, and nanofibers derived from chitosan. - Provides systematic and comprehensive coverage of the manufacture, properties, and applications of nanofibers - Covers recent developments in nanofibers materials including electrospinning of bicomponent, chitosan, carbon, and conductive fibers - Brings together expertise from academia and industry to provide comprehensive, up-to-date information on nanofiber research and development - Offers systematic and comprehensive coverage for academic researchers, industry professionals, and postgraduate students working in the field of fiber science

Download or read book Lab on Fiber Technology written by Andrea Cusano and published by Springer. This book was released on 2014-07-29 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on a research field that is rapidly emerging as one of the most promising ones for the global optics and photonics community: the “lab-on-fiber” technology. Inspired by the well-established "lab on-a-chip" concept, this new technology essentially envisages novel and highly functionalized devices completely integrated into a single optical fiber for both communication and sensing applications. Based on the R&D experience of some of the world's leading authorities in the fields of optics, photonics, nanotechnology, and material science, this book provides a broad and accurate description of the main developments and achievements in the lab-on-fiber technology roadmap, also highlighting the new perspectives and challenges to be faced. This book is essential for scientists interested in the cutting-edge fiber optic technology, but also for graduate students.

Download or read book Optical and Electronic Fibers written by Lei Wei and published by John Wiley & Sons. This book was released on 2024-12-04 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understand the cutting edge of fiber technology with this comprehensive guide Because of their sensitivity and flexible capabilities, functional fibers have an enormous range of applications across many industries. In particular, advanced optical and electronic fibers have been integrated into numerous cutting-edge technologies, and their applications are growing year on year. There is an expanding need for scientists and professionals, particularly in the healthcare and sensor industries, to be familiar with the complex web of factors underlying functional fibers. Optical and Electronic Fibers builds this familiarity with an up-to-date, highly readable presentation. It introduces both the characteristics and applications of different functional fiber materials before moving to future opportunities for research and development. The result is an accessible overview of an emerging technology with boundless potential. Optical and Electronic Fibers readers will also find: More than 150 figures, many in full color Applications in industries ranging from optical waveguides to neural interfaces Detailed treatment of fiber materials, including soft glasses, carbon materials, liquids, and semiconductors Optical and Electronic Fibers is a useful reference for materials scientists, electrical engineers, and semiconductor and sensor professionals.