Download or read book Organ Printing written by Dong-Woo Cho and published by Morgan & Claypool Publishers. This book was released on 2015-10-01 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces various 3D printing systems, biomaterials, and cells for organ printing. In view of the latest applications of several 3D printing systems, their advantages and disadvantages are also discussed. A basic understanding of the entire spectrum of organ printing provides pragmatic insight into the mechanisms, methods, and applications of this discipline. Organ printing is being applied in the tissue engineering field with the purpose of developing tissue/organ constructs for the regeneration of both hard (bone, cartilage, osteochondral) and soft tissues (heart). There are other potential application areas including tissue/organ models, disease/cancer models, and models for physiology and pathology, where in vitro 3D multicellular structures developed by organ printing are valuable.
Download or read book Cell and Organ Printing written by Bradley R. Ringeisen and published by Springer Science & Business Media. This book was released on 2010-09-02 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cell and organ printing has become a hot topic of scientific pursuit. Since several early publications between 2000-2003 that demonstrated proof-of-concept, cell and organ printing has blossomed into a rich area for scientific exploration that is being performed by researchers across the globe. Research has thoroughly demonstrated that living cells can be printed via a number of actuations including electrospray, extrusion via micropens and ejection through photothermal, thermal or optical mechanisms. This topic has come of age and it is ripe for exploring the underpinnings of the research to date. We have included research that uses printing technology to deposit or guide cells for tissue engineering applications and for completeness, we have also included chapters describing bacteria printing, biomolecular printing that could be used to build growth factors or recruitment macromolecules into scaffolds, tissue microdissection, as well as live cell printing. The breadth of approaches includes 3D freeform fabrication, ink jet, laser guidance and modified laser direct write techniques. We hope that this book is not the final word but the first word, defining how these tools have been used to take the first steps towards the ultimate goal of creating heterogeneous tissue constructs. Only time will tell whether cell printers will truly become organ printers, but the technologies described in this book hold promise to achieve what the field of regenerative medicine requires - functional 3D scaffolds with multiple cell types differentiated into functional tissue!
Download or read book 3D Printing for Implantable Medical Devices From Surgical Reconstruction to Tissue Organ Regeneration written by Julien Georges Didier Barthès and published by Frontiers Media SA. This book was released on 2021-03-01 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dr. Julien Barthes is Collaborative Project Manager at PROTiP MEDICAL SAS. All other Topic Editors declare no competing interests with regards to the Research Topic subject.
Download or read book Bioprinting written by Kenneth Douglas and published by Oxford University Press. This book was released on 2021 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Of the 121,000 people on donor lists in the U.S., over 100,000 need kidney transplants and thousands die each year while waiting. Bioprinting aspires to build healthy kidney tissue from a patient's own cells and transplant this to boost failing kidneys without fear of rejection...As the twenty-first century dawned, a handful of inspired scientists tried to use 3D printing to create living human tissue: to 3D print living human cells with a functional organization. Their vision was to restore the health of people with intractable injuries-worn out cartilage, severed nerves,ailing kidneys, failing hearts-the gamut of human frailties. Their modest success energized others to join the quest. Now, after two decades of ingenious effort and hard work, they have carved out a vibrant new discipline: bioprinting.In Bioprinting: To Make Ourselves Anew, physicist Kenneth Douglas casts an eye over bioprinting's achievements to date and its future prospects. He explains the science with rigor but with a minimum of technical baggage. This is the first book on the subject written expressly for the lay audience:accessible and even entertaining. The author has interviewed two dozen bioprinting researchers from around the world and the personal stories of the scientists behind the science enrich the narrative. These contemporary vignettes are complemented by historical accounts of the women and men whoseprescient contributions provided the foundations for bioprinting's development.Bioprinting describes the challenges and accomplishments in the bioprinting of skin, cartilage, bone, skeletal muscle, neuromuscular junctions, liver, heart, lung, kidneys, and so-called organs-on-a-chip as well as the challenges of providing blood vessels and nerves to bioprinted tissues. This is acompelling tale of a work in progress: to imitate nature in order to help people with debilitating afflictions to heal.
Download or read book 3D Printing in Medicine written by Deepak M. Kalaskar and published by Woodhead Publishing. This book was released on 2022-10-18 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Printing in Medicine, Second Edition examines the rapidly growing market of 3D-printed biomaterials and their clinical applications. With a particular focus on both commercial and premarket tools, the book looks at their applications within medicine and the future outlook for the field. The chapters are written by field experts actively engaged in educational and research activities at the top universities in the world. The earlier chapters cover the fundamentals of 3D printing, including topics such as materials and hardware. The later chapters go on to cover innovative applications within medicine such as computational analysis of 3D printed constructs, personalized 3D printing - including 3D cell and organ printing and the role of AI - with a subsequent look at the applications of high-resolution printing, 3D printing in diagnostics, drug development, 4D printing, and much more. This updated new edition features completely revised content, with additional new chapters covering organs-on-chips, bioprinting regulations and standards, intellectual properties, and socio-ethical implications of organs-on-demand. Reviews a broad range of biomedical applications of 3D printing biomaterials and technologies Provides an interdisciplinary look at 3D printing in medicine, bridging the gap between engineering and clinical fields Includes completely updated content with additional new chapters, covering topics such as organs-on-chips, bioprinting regulations, intellectual properties, medical standards in 3D printing, and more
Download or read book Regenerative Medicine Applications in Organ Transplantation written by Giuseppe Orlando and published by Academic Press. This book was released on 2013-10-11 with total page 1050 pages. Available in PDF, EPUB and Kindle. Book excerpt: Regenerative Medicine Applications in Organ Transplantation illustrates exactly how these two fields are coming together and can benefit one another. It discusses technologies being developed, methods being implemented, and which of these are the most promising. The text encompasses tissue engineering, biomaterial sciences, stem cell biology, and developmental biology, all from a transplant perspective. Organ systems considered include liver, renal, intestinal, pancreatic, and more. Leaders from both fields have contributed chapters, clearly illustrating that regenerative medicine and solid organ transplantation speak the same language and that both aim for similar medical outcomes. The overall theme of the book is to provide insight into the synergy between organ transplantation and regenerative medicine. Recent groundbreaking achievements in regenerative medicine have received unprecedented coverage by the media, fueling interest and enthusiasm in transplant clinicians and researchers. Regenerative medicine is changing the premise of solid organ transplantation, requiring transplantation investigators to become familiar with regenerative medicine investigations that can be extremely relevant to their work. Similarly, regenerative medicine investigators need to be aware of the needs of the transplant field to bring these two fields together for greater results. Bridges the gap between regenerative medicine and solid organ transplantation and highlights reasons for collaboration Explains the importance and future potential of regenerative medicine to the transplant community Illustrates to regenerative medicine investigators the needs of the transplant discipline to drive and guide investigations in the most promising directions
Download or read book 3D Printing in Biotechnology written by Nandita Dasgupta and published by Elsevier. This book was released on 2023-09-23 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Printing in Biotechnology: Current Technologies and Applications explains the basic designs and recent progress in the application of 3D printing within various biotechnology fields. The book is a compilation of the basic fundamentals, designs, current applications, and future considerations related to this emerging technology, and summarizes the promising application of 3D bioprinting. Chapters contain detailed state-of-the-art knowledge to assist in the development and design of 3D printers, with applications in the medical, food, and environmental fields. This book will appeal to researchers and students from different disciplines, including materials science and technology, food, agriculture, and various biomedical fields. The content includes industrial applications and fills the gap between the research conducted in the laboratory and practical applications in related industries. Offers an introduction to the emerging technologies and sectors in the field of 3D printing Discusses the development of sustainable materials and bio-inks Provides a guide for medical professionals and practitioners to incorporate current 3D printing technology into their medical practice Bridges the knowledge gap for current designs used in 3D printing technology for designing an efficient and innovative 3D printer Previews the technological basis for new farming practices and food engineering concepts utilizing 3D techniques
Download or read book 3D Bioprinting in Tissue and Organ Regeneration written by Yang Wu and published by Academic Press. This book was released on 2022-09-10 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Bioprinting in Tissue and Organ Regeneration covers state-of-the-art advances and applications in bioprinting. Beginning with an introduction that considers techniques, bioinks and construct design, the authors then move onto a detailed review of applications of bioprinting in different biomedical fields (skin, cartilage, bone, vascularized tissue, etc.). This is followed by a chapter overview of intraoperative bioprinting, which is widely considered one of the important future trends in this area. Finally, the authors tackle ethical and regulation concerns regarding the utilization of bioprinting.The book is written by three global experts for an audience of students and professionals with some basic knowledge of bioprinting, but who seek a deeper understanding of the biomedical applications involved in bioprinting. Introduces readers to bioprinting modalities, as well as pre-bioprinting, bioprinting and post-bioprinting procedures Focuses on biomedical applications used in bioprinting in chapters specific to skin, cartilage, bone and vascularized tissue Provides readers with original ideas from engineering and clinical points-of-view that are based on the authors’ extensive experience in this field, as well as the possibilities of future translation of bioprinting technologies from bench to bedside
Download or read book 3D Bioprinting written by Ibrahim Tarik Ozbolat and published by Academic Press. This book was released on 2016-11-21 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Bioprinting: Fundamentals, Principles and Applications provides the latest information on the fundamentals, principles, physics, and applications of 3D bioprinting. It contains descriptions of the various bioprinting processes and technologies used in additive biomanufacturing of tissue constructs, tissues, and organs using living cells. The increasing availability and decreasing costs of 3D printing technologies are driving its use to meet medical needs, and this book provides an overview of these technologies and their integration. Each chapter discusses current limitations on the relevant technology, giving future perspectives. Professor Ozbolat has pulled together expertise from the fields of bioprinting, tissue engineering, tissue fabrication, and 3D printing in his inclusive table of contents. Topics covered include raw materials, processes, machine technology, products, applications, and limitations. The information in this book will help bioengineers, tissue and manufacturing engineers, and medical doctors understand the features of each bioprinting process, as well as bioink and bioprinter types. In addition, the book presents tactics that can be used to select the appropriate process for a given application, such as tissue engineering and regenerative medicine, transplantation, clinics, or pharmaceutics. Describes all aspects of the bioprinting process, from bioink processing through design for bioprinting, bioprinting techniques, bioprinter technologies, organ printing, applications, and future trends Provides a detailed description of each bioprinting technique with an in-depth understanding of its process modeling, underlying physics and characteristics, suitable bioink and cell types printed, and major accomplishments achieved thus far Explains organ printing technology in detail with a step-by-step roadmap for the 3D bioprinting of organs from isolating stem cells to the post-transplantation of organs Presents tactics that can be used to select the appropriate process for a given application, such as tissue engineering and regenerative medicine, transplantation, clinics, or pharmaceutics
Download or read book The Culture of Organs written by Alexis Carrel and published by . This book was released on 1938 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Organ Manufacturing written by Xiaohong Wang and published by Nova Science Publishers. This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first time that human organs, such as the heart, liver, kidney, stomach, uterus, skin, lung, pancreas and breast can be manufactured automatically and precisely for clinical transplantation, drug screening and metabolism model establishment. Headed by Professor Xiaohong Wang (also the founder and director) in the Center of Organ Manufacturing, Department of Mechanical Engineering, Tsinghua University, this group has focused on organ manufacturing for over ten years. A series of technical bottleneck problems, such as vascular and nerve system establishment in a construct, multiple cell types and material system incorporation, and stem cell sequential engagement, have been overcome one by one. Two technical approaches have been exploited extensively. One is multiple nozzle rapid prototyping (RP), additive manufacturing (AM), or three-dimension (3D) printing. The other is combined mold systems. More than 110 articles and 40 patents with a series of theories and practices have been published consequently. In the future, all the failed organs (including the brain) in the human body can be substituted easily like a small accessory part in a car. Everyone can get benefit from these techniques, which ultimately means that the lifespan of humans, therefore, can be greatly prolonged from this time point. This book examines the progress made in the field and the developments made by these researchers (and authors) in the field.
Download or read book Bioprinting written by Chee Kai Chua and published by World Scientific Publishing Co Inc. This book was released on 2014-11-27 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: At labs around the world, researchers have been experimenting with bioprinting, first just to see whether it was possible to push cells through a printhead without killing them (in most cases it is), and then trying to make cartilage, bone, skin, blood vessels, small bits of liver and other tissues. There are other ways to try to “engineer” tissue — one involves creating a scaffold out of plastics or other materials and adding cells to it. In theory, at least, a bioprinter has advantages in manipulating control of the placement of cells and other components to mimic natural structures. But just as the claims made for 3-D printing technology sometimes exceed the reality, the field of bioprinting has seen its share of hype. The reality is that, although bioprinting researchers have made great strides, there are many formidable obstacles to overcome. Nobody who has any credibility claims they can print organs, or believes in their heart of hearts that that will happen in the next 20 years, but for operations like hip replacement, advance in Bio-printing has made customization of certain body parts possible. This book will start from the concept of Tissue Engineering, covering various approaches in Scaffolds for tissue engineering, Bioprinting techniques and Materials for bioprinting, Cell processing, 3D cell culture techniques, Computational design and simulation, multi-disciplinary approaches in bioprinting and finally cover the applications of bioprinting.
Download or read book Printing Art written by and published by . This book was released on 1914 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Printing Art written by and published by . This book was released on 1905 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Printing Art an Illustrated Monthly Magazine written by and published by . This book was released on 1927 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Textbook of Organ Transplantation Set written by Allan D. Kirk and published by John Wiley & Sons. This book was released on 2014-07-21 with total page 5346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brought to you by the world’s leading transplant clinicians, Textbook of Organ Transplantation provides a complete and comprehensive overview of modern transplantation in all its complexity, from basic science to gold-standard surgical techniques to post-operative care, and from likely outcomes to considerations for transplant program administration, bioethics and health policy. Beautifully produced in full color throughout, and with over 600 high-quality illustrations, it successfully: Provides a solid overview of what transplant clinicians/surgeons do, and with topics presented in an order that a clinician will encounter them. Presents a holistic look at transplantation, foregrounding the interrelationships between transplant team members and non-surgical clinicians in the subspecialties relevant to pre- and post-operative patient care, such as gastroenterology, nephrology, and cardiology. Offers a focused look at pediatric transplantation, and identifies the ways in which it significantly differs from transplantation in adults. Includes coverage of essential non-clinical topics such as transplant program management and administration; research design and data collection; transplant policy and bioethical issues. Textbook of Organ Transplantation is the market-leading and definitive transplantation reference work, and essential reading for all transplant surgeons, transplant clinicians, program administrators, basic and clinical investigators and any other members of the transplantation team responsible for the clinical management or scientific study of transplant patients.
