Download or read book Optimizing the Performance of Synchronization Process written by Rshdee Alhakim and published by LAP Lambert Academic Publishing. This book was released on 2013 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: These works are in the theme of modelling and optimization of wireless communication systems used in particular in wireless sensor networks and indoor applications. In this area, the impulse-radio ultra-wideband (IR-UWB) technology is considered as a promising solution, because it offers significant potential in terms of fine time-domain resolution, low power and low cost on-chip implementation facility, high secure and safety, and its ability to coexist with narrowband systems. However, the timing synchronization process is still a major challenge that must be addressed in order to enable UWB transmission systems to reach a desired BER quality level. Synchronization systems are usually composed of three main units: signal detection, timing acquisition and tracking. The objective of this manuscript is to develop methods to control synchronization to optimize the quality of transmission of UWB signals. The timing with dirty template approach is proposed as a promising candidate for achieving rapid, accurate and low-complexity synchronization. The dirty template technique is utilized to develop and test the performance of the three aforementioned synchronization system units.

Download or read book Performance Optimization Based on Characterizing Synchronization written by Pedro P. M. Trancoso and published by . This book was released on 1995 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Performance Optimization and Tuning Techniques for IBM Power Systems Processors Including IBM POWER8 written by Brian Hall and published by IBM Redbooks. This book was released on 2017-03-31 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication focuses on gathering the correct technical information, and laying out simple guidance for optimizing code performance on IBM POWER8® processor-based systems that run the IBM AIX®, IBM i, or Linux operating systems. There is straightforward performance optimization that can be performed with a minimum of effort and without extensive previous experience or in-depth knowledge. The POWER8 processor contains many new and important performance features, such as support for eight hardware threads in each core and support for transactional memory. The POWER8 processor is a strict superset of the IBM POWER7+TM processor, and so all of the performance features of the POWER7+ processor, such as multiple page sizes, also appear in the POWER8 processor. Much of the technical information and guidance for optimizing performance on POWER8 processors that is presented in this guide also applies to POWER7+ and earlier processors, except where the guide explicitly indicates that a feature is new in the POWER8 processor. This guide strives to focus on optimizations that tend to be positive across a broad set of IBM POWER® processor chips and systems. Specific guidance is given for the POWER8 processor; however, the general guidance is applicable to the IBM POWER7+, IBM POWER7®, IBM POWER6®, IBM POWER5, and even to earlier processors. This guide is directed at personnel who are responsible for performing migration and implementation activities on POWER8 processor-based systems. This includes system administrators, system architects, network administrators, information architects, and database administrators (DBAs).

Download or read book Introduction to Multivariate Statistical Analysis in Chemometrics written by Kurt Varmuza and published by CRC Press. This book was released on 2016-04-19 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using formal descriptions, graphical illustrations, practical examples, and R software tools, Introduction to Multivariate Statistical Analysis in Chemometrics presents simple yet thorough explanations of the most important multivariate statistical methods for analyzing chemical data. It includes discussions of various statistical methods, such as

Download or read book Proceedings of the 27th Conference of Spacecraft TT C Technology in China written by Rongjun Shen and published by Springer. This book was released on 2014-10-06 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects selected papers from the 27th Conference of Spacecraft TT&C Technology in China held in Guangzhou on November 9-12, 2014. The book features state-of-the-art studies on spacecraft TT&C in China with the theme of “Wider Space for TT&C”. To meet requirements of new space endeavors, especially China’s deep-space programs, China’s spacecraft TT&C systems shall “go farther, measure more accurately and control better with higher efficacy”. Researchers and engineers in the field of aerospace engineering and communication engineering can benefit from the book.

Download or read book Java Performance Tuning written by Jack Shirazi and published by "O'Reilly Media, Inc.". This book was released on 2003-01-21 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Java application performance is tied pretty heavily to the underlying Java Virtual Machine, and the new 1.4 version of Java has significant changes that mean previously used performance tips and strategies may no longer work. Significantly revised and expanded, this second edition not only covers Java 1.4, but adds new coverage of JDBC, NIO, Servlets, EJB and JavaServer Pages. Suitable for intermediate and advanced Java developers, this text also covers JDBC, RMI/CORBA, Servlets, JavaServer Pages and custom tag libraries, XML, internationalization, JavaMail, Enterprise JavaBeans and performance tuning. It should be a useful resource for teaching how to create a tuning strategy, how to use profiling tools to understand a program's behaviour, and how to avoid performance penalties from inefficient code, making them more efficient and effective. The result is code that's robust, maintainable and fast.

Download or read book Resource Management for Wireless System Optimization Transmission and Services written by Hang Qin and published by Scientific Research Publishing, Inc. USA. This book was released on 2017-05-31 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to many factors including power control, scheduling, flow routing, and so on, the resource management via optimization is the key to ensure overall end-to-end performance of wireless systems. Data transmission and the service, is one of the most important topics for the future wireless and communication networks. In the past decade, people have witnessed a significant progress in the advance of resource management over wireless systems. It is not only an important research topic, but also emerging as an integral material for graduate-level networking courses for students in Computing Science major. Nevertheless, there are few books available to date that can serve such a purpose. It is because of the cross-disciplines that resource management requires, which cover a broad range of topics, making it especially challenging to develop a specific book to cover them all. For instance, cross-layer resource management has to be specific with different design variables and constraints, hence different networking scenarios have different end-to-end utility goals and service objectives, and different problem formulations to employ different optimization methods. To respond to the need of such a book for graduate/undergraduate students, researchers and engineers, this book try to tackle the difficulties by bringing together the resource management and optimization design in wireless system. This intent is to either serve as a textbook for advanced graduate-level courses on wireless and communication networks, or as a reference book by students and engineers.

Download or read book Algorithms and Architectures for Parallel Processing written by Zahir Tari and published by Springer Nature. This book was released on with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Process Synchronization written by Rajive Bagrodia and published by . This book was released on 1987 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modeling and Optimization in Software Defined Networks written by Konstantinos Poularakis and published by Springer Nature. This book was released on 2022-06-01 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a quick reference and insights into modeling and optimization of software-defined networks (SDNs). It covers various algorithms and approaches that have been developed for optimizations related to the control plane, the considerable research related to data plane optimization, and topics that have significant potential for research and advances to the state-of-the-art in SDN. Over the past ten years, network programmability has transitioned from research concepts to more mainstream technology through the advent of technologies amenable to programmability such as service chaining, virtual network functions, and programmability of the data plane. However, the rapid development in SDN technologies has been the key driver behind its evolution. The logically centralized abstraction of network states enabled by SDN facilitates programmability and use of sophisticated optimization and control algorithms for enhancing network performance, policy management, and security.Furthermore, the centralized aggregation of network telemetry facilitates use of data-driven machine learning-based methods. To fully unleash the power of this new SDN paradigm, though, various architectural design, deployment, and operations questions need to be addressed. Associated with these are various modeling, resource allocation, and optimization opportunities.The book covers these opportunities and associated challenges, which represent a ``call to arms'' for the SDN community to develop new modeling and optimization methods that will complement or improve on the current norms.

Download or read book Handbook of Optimization in Complex Networks written by My T. Thai and published by Springer Science & Business Media. This book was released on 2012-01-28 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complex Social Networks is a newly emerging (hot) topic with applications in a variety of domains, such as communication networks, engineering networks, social networks, and biological networks. In the last decade, there has been an explosive growth of research on complex real-world networks, a theme that is becoming pervasive in many disciplines, ranging from mathematics and computer science to the social and biological sciences. Optimization of complex communication networks requires a deep understanding of the interplay between the dynamics of the physical network and the information dynamics within the network. Although there are a few books addressing social networks or complex networks, none of them has specially focused on the optimization perspective of studying these networks. This book provides the basic theory of complex networks with several new mathematical approaches and optimization techniques to design and analyze dynamic complex networks. A wide range of applications and optimization problems derived from research areas such as cellular and molecular chemistry, operations research, brain physiology, epidemiology, and ecology.

Download or read book Microsoft Certified Azure Solutions Architect Expert AZ 305 written by Cybellium and published by Cybellium. This book was released on with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Welcome to the forefront of knowledge with Cybellium, your trusted partner in mastering the cutting-edge fields of IT, Artificial Intelligence, Cyber Security, Business, Economics and Science. Designed for professionals, students, and enthusiasts alike, our comprehensive books empower you to stay ahead in a rapidly evolving digital world. * Expert Insights: Our books provide deep, actionable insights that bridge the gap between theory and practical application. * Up-to-Date Content: Stay current with the latest advancements, trends, and best practices in IT, Al, Cybersecurity, Business, Economics and Science. Each guide is regularly updated to reflect the newest developments and challenges. * Comprehensive Coverage: Whether you're a beginner or an advanced learner, Cybellium books cover a wide range of topics, from foundational principles to specialized knowledge, tailored to your level of expertise. Become part of a global network of learners and professionals who trust Cybellium to guide their educational journey. www.cybellium.com

Download or read book Stochastic Modeling and Optimization of Manufacturing Systems and Supply Chains written by J. George Shanthikumar and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume originates from two workshops, both focusing on themes that are reflected in the title of the volume. The first workshop took place at Eindhoven University of Technology, April 24-26, 2001, on the occasion of the University granting a doctorate honoris causa to Profes sor John A. Buzacott. The second workshop was held on June 15, 2002 at Cornell University (preceding the annual INFORMSjMSOM Confer ence), honoring John's retirement and his lifetime contributions. Each of the two workshops consisted of about a dozen technical presentations. The objective of the volume, however, is not to simply publish the proceedings of the two workshops. Rather, our objective is to put to gether a select set of articles, each organized into a well-written chapter, focusing on a timely topic. Collected into a single volume, these chapters aim to serve as a useful reference for researchers and practitioners alike, and also as reading materials for graduate courses or seminars.

Download or read book Euro Par 96 Parallel Processing written by Luc Bouge and published by Springer Science & Business Media. This book was released on 1996-08-14 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt: Content Description #Includes bibliographical references and index.

Download or read book Parallel Programming for Modern High Performance Computing Systems written by Pawel Czarnul and published by CRC Press. This book was released on 2018-03-05 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: In view of the growing presence and popularity of multicore and manycore processors, accelerators, and coprocessors, as well as clusters using such computing devices, the development of efficient parallel applications has become a key challenge to be able to exploit the performance of such systems. This book covers the scope of parallel programming for modern high performance computing systems. It first discusses selected and popular state-of-the-art computing devices and systems available today, These include multicore CPUs, manycore (co)processors, such as Intel Xeon Phi, accelerators, such as GPUs, and clusters, as well as programming models supported on these platforms. It next introduces parallelization through important programming paradigms, such as master-slave, geometric Single Program Multiple Data (SPMD) and divide-and-conquer. The practical and useful elements of the most popular and important APIs for programming parallel HPC systems are discussed, including MPI, OpenMP, Pthreads, CUDA, OpenCL, and OpenACC. It also demonstrates, through selected code listings, how selected APIs can be used to implement important programming paradigms. Furthermore, it shows how the codes can be compiled and executed in a Linux environment. The book also presents hybrid codes that integrate selected APIs for potentially multi-level parallelization and utilization of heterogeneous resources, and it shows how to use modern elements of these APIs. Selected optimization techniques are also included, such as overlapping communication and computations implemented using various APIs. Features: Discusses the popular and currently available computing devices and cluster systems Includes typical paradigms used in parallel programs Explores popular APIs for programming parallel applications Provides code templates that can be used for implementation of paradigms Provides hybrid code examples allowing multi-level parallelization Covers the optimization of parallel programs

Download or read book Supply Chain Management written by Ray R. Venkataraman and published by SAGE Publications. This book was released on 2021-12-15 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrating coverage of globalization, sustainability, and ethics within every chapter, Supply Chain Management: Securing a Superior Global Edge provides students with the tools they need to succeed in today’s fiercely competitive, interconnected global economy.

Download or read book Logistic Optimization of Chemical Production Processes written by Sebastian Engell and published by John Wiley & Sons. This book was released on 2008-09-08 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this first book dedicated to the logistics of chemical plants and production processes, authors from academia and industry -- such as Bayer, Degussa, Merck -- provide an overview of the field, incorporating the knowledge and experience gathered over the last 10 years. In so doing, they describe the latest ideas on efficient design, illustrating when to produce which part of the equipment and with which resources, so as to optimize chemical plants for high capacity and flexibility. This book gives an overview of the state-of-the-art of the whole logistic chain of chemical production processes. Alongside the fundamentals, tools and algorithms, and integration issues, the book features five significant industrial case studies.