Download or read book Optimization of the Communication System for Networked Control Systems written by Rainer Blind and published by Logos Verlag Berlin GmbH. This book was released on 2014 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Networked Control Systems are control systems, where the feedback loop is closed by a communication system. Within the past decades, the effects of the properties of the communication system, like loss, delay, or bandwidth constraints, on the control performance have been studied thoroughly. Since the properties of the communication system depend on the design of the communication system and its usage, the goal of this thesis is to work towards a joint design of the controller and the communication system for networked control systems. To achieve this goal, the thesis builds upon previous works from the field of networked control systems, where controller design methods for a communication system with given properties are developed, but takes into account that these properties depend on the design of the communication system and its usage. Based on well known ideas from communication theory, several methods to improve the control performance by optimizing the communication system are presented.
Download or read book Optimization of the Communication System for Networked Control Systems written by Rainer Blind and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Network Optimization and Control written by Srinivas Shakkottai and published by Now Publishers Inc. This book was released on 2008 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: Network Optimization and Control is the ideal starting point for a mature reader with little background on the subject of congestion control to understand the basic concepts underlying network resource allocation.
Download or read book Optimal Networked Control Systems with MATLAB written by Jagannathan Sarangapani and published by CRC Press. This book was released on 2018-09-03 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimal Networked Control Systems with MATLAB® discusses optimal controller design in discrete time for networked control systems (NCS). The authors apply several powerful modern control techniques in discrete time to the design of intelligent controllers for such NCS. Detailed derivations, rigorous stability proofs, computer simulation examples, and downloadable MATLAB® codes are included for each case. The book begins by providing background on NCS, networked imperfections, dynamical systems, stability theory, and stochastic optimal adaptive controllers in discrete time for linear and nonlinear systems. It lays the foundation for reinforcement learning-based optimal adaptive controller use for finite and infinite horizons. The text then: Introduces quantization effects for linear and nonlinear NCS, describing the design of stochastic adaptive controllers for a class of linear and nonlinear systems Presents two-player zero-sum game-theoretic formulation for linear systems in input–output form enclosed by a communication network Addresses the stochastic optimal control of nonlinear NCS by using neuro dynamic programming Explores stochastic optimal design for nonlinear two-player zero-sum games under communication constraints Treats an event-sampled distributed NCS to minimize transmission of state and control signals within the feedback loop via the communication network Covers distributed joint optimal network scheduling and control design for wireless NCS, as well as the effect of network protocols on the wireless NCS controller design An ideal reference for graduate students, university researchers, and practicing engineers, Optimal Networked Control Systems with MATLAB® instills a solid understanding of neural network controllers and how to build them.
Download or read book Optimal and Robust Scheduling for Networked Control Systems written by Stefano Longo and published by CRC Press. This book was released on 2018-09-03 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimal and Robust Scheduling for Networked Control Systems tackles the problem of integrating system components—controllers, sensors, and actuators—in a networked control system. It is common practice in industry to solve such problems heuristically, because the few theoretical results available are not comprehensive and cannot be readily applied by practitioners. This book offers a solution to the deterministic scheduling problem that is based on rigorous control theoretical tools but also addresses practical implementation issues. Helping to bridge the gap between control theory and computer science, it suggests that the consideration of communication constraints at the design stage will significantly improve the performance of the control system. Technical Results, Design Techniques, and Practical Applications The book brings together well-known measures for robust performance as well as fast stochastic algorithms to assist designers in selecting the best network configuration and guaranteeing the speed of offline optimization. The authors propose a unifying framework for modelling NCSs with time-triggered communication and present technical results. They also introduce design techniques, including for the codesign of a controller and communication sequence and for the robust design of a communication sequence for a given controller. Case studies explore the use of the FlexRay TDMA and time-triggered control area network (CAN) protocols in an automotive control system. Practical Solutions to Your Time-Triggered Communication Problems This unique book develops ready-to-use engineering tools for large-scale control system integration with a focus on robustness and performance. It emphasizes techniques that are directly applicable to time-triggered communication problems in the automotive industry and in avionics, robotics, and automated manufacturing.
Download or read book Smart Power Distribution Systems written by Qiang Yang and published by Academic Press. This book was released on 2018-10-17 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Power Distribution Systems: Control, Communication, and Optimization explains how diverse technologies work to build and maintain smart grids around the globe. Yang, Yang and Li present the most recent advances in the control, communication and optimization of smart grids and provide unique insight into power system control, sensing and communication, and optimization technologies. The book covers control challenges for renewable energy and smart grids, communication in smart power systems, and optimization challenges in smart power system operations. Each area discussed focuses on the scientific innovations relating to the approaches, methods and algorithmic solutions presented. Readers will develop sound knowledge and gain insights into the integration of renewable energy generation in smart power distribution systems. - Presents the latest technological advances in electric power distribution networks, with a particular focus on methodologies, approaches and algorithms - Provides insights into the most recent research and developments from expert contributors from across the world - Presents a clear and methodical structure that guides the reader through discussion and analysis, providing unique insights and sound knowledge along the way
Download or read book Networked Control Systems written by Alberto Bemporad and published by Springer Science & Business Media. This book was released on 2010-10-14 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book nds its origin in the WIDE PhD School on Networked Control Systems, which we organized in July 2009 in Siena, Italy. Having gathered experts on all the aspects of networked control systems, it was a small step to go from the summer school to the book, certainly given the enthusiasm of the lecturers at the school. We felt that a book collecting overviewson the important developmentsand open pr- lems in the eld of networked control systems could stimulate and support future research in this appealing area. Given the tremendouscurrentinterests in distributed control exploiting wired and wireless communication networks, the time seemed to be right for the book that lies now in front of you. The goal of the book is to set out the core techniques and tools that are ava- able for the modeling, analysis and design of networked control systems. Roughly speaking, the book consists of three parts. The rst part presents architectures for distributed control systems and models of wired and wireless communication n- works. In particular, in the rst chapter important technological and architectural aspects on distributed control systems are discussed. The second chapter provides insight in the behavior of communication channels in terms of delays, packet loss and information constraints leading to suitable modeling paradigms for commu- cation networks.
Download or read book Networked Control Systems written by Alberto Bemporad and published by Springer. This book was released on 2010-10-15 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book nds its origin in the WIDE PhD School on Networked Control Systems, which we organized in July 2009 in Siena, Italy. Having gathered experts on all the aspects of networked control systems, it was a small step to go from the summer school to the book, certainly given the enthusiasm of the lecturers at the school. We felt that a book collecting overviewson the important developmentsand open pr- lems in the eld of networked control systems could stimulate and support future research in this appealing area. Given the tremendouscurrentinterests in distributed control exploiting wired and wireless communication networks, the time seemed to be right for the book that lies now in front of you. The goal of the book is to set out the core techniques and tools that are ava- able for the modeling, analysis and design of networked control systems. Roughly speaking, the book consists of three parts. The rst part presents architectures for distributed control systems and models of wired and wireless communication n- works. In particular, in the rst chapter important technological and architectural aspects on distributed control systems are discussed. The second chapter provides insight in the behavior of communication channels in terms of delays, packet loss and information constraints leading to suitable modeling paradigms for commu- cation networks.
Download or read book Control Strategies and Co Design of Networked Control Systems written by Héctor Benítez-Pérez and published by Springer. This book was released on 2018-07-31 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents Networked Control System (NCS) as a particular kind of a real-time distributed system (RTDS), composed of a set of nodes, interconnected by a network, and able to develop a complete control process. It describes important parts of the control process such as sensor and actuator activities, which rely on a real-time operating system, and a real-time communication network. As the use of common bus network architecture introduces different forms of uncertainties between sensors, actuators, and controllers, several approaches such as reconfigurable systems have been developed to tackle this problem. Moreover, modeling NCS is a challenging procedure, since there are several non-linear situations, like local saturations, uncertain time delays, dead-zones, or local situations, it is necessary to deal with. The book describes a novel strategy for modelling and control based on a fuzzy control approach and codesign strategies.
Download or read book Investigation on Robust Codesign Methods for Networked Control Systems written by Sanad Al-Areqi and published by Logos Verlag Berlin GmbH. This book was released on 2015-12-31 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problem of jointly designing a robust controller and an intelligent scheduler for networked control systems (NCSs) is addressed in this thesis. NCSs composing of multiple plants that share a single channel communication network with uncertain time-varying transmission times are modeled as switched polytopic systems with additive norm-bounded uncertainty. Switching is deployed to represent scheduling, the polytopic uncertainty to overapproximatively describe the uncertain time-varying transmission times. Based on the resulting NCS model and a state feedback control law, the control and scheduling codesign problem is then introduced and formulated as a robust (minimax) optimization problem with the objective of minimizing the worst-case value of an associated infinite time-horizon quadratic cost function. Five robust codesign strategies are investigated for tackling the introduced optimization problem, namely: Periodic control and scheduling (PCS), Receding-horizon control and scheduling (RHCS), Implementation-aware control and scheduling (IACS), Event-based control and scheduling (EBCS), Prediction-based control and scheduling (PBCS). All these codesign strategies are determined from LMI optimization problems based on the Lyapunov theory. The properties of each are evaluated and compared in terms of computational complexity and control performance based on simulation and experimental study, showing their effectiveness in improving the performance while utilizing the limited communication resources very efficiently.
Download or read book Economically Enabled Energy Management written by Takeshi Hatanaka and published by Springer Nature. This book was released on 2020-04-21 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers contributions from a multidisciplinary research team comprised of control engineering and economics researchers and formed to address a central interdisciplinary social issue, namely economically enabled energy management. The book’s primary focus is on achieving optimal energy management that is viable from both an engineering and economic standpoint. In addition to the theoretical results and techniques presented, several chapters highlight experimental case studies, which will benefit academic researchers and practitioners alike. The first three chapters present comprehensive overviews of respective social contexts, underscore the pressing need for economically efficient energy management systems and academic work on this emerging research topic, and identify fundamental differences between approaches in control engineering and economics. In turn, the next three chapters (Chapters 4–6) provide economics-oriented approaches to the subject. The following five chapters (Chapters 7–11) address optimal energy market design, integrating both physical and economic models. The book’s last three chapters (Chapters 12–14) mainly focus on the engineering aspects of next-generation energy management, though economic factors are also shown to play important roles.
Download or read book Networked Control Systems written by Fei-Yue Wang and published by Springer Science & Business Media. This book was released on 2008-06-17 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Networked control systems (NCS) confer advantages of cost reduction, system diagnosis and flexibility, minimizing wiring and simplifying the addition and replacement of individual elements; efficient data sharing makes taking globally intelligent control decisions easier with NCS. The applications of NCS range from the large scale of factory automation and plant monitoring to the smaller networks of computers in modern cars, places and autonomous robots. Networked Control Systems presents recent results in stability and robustness analysis and new developments related to networked fuzzy and optimal control. Many chapters contain case-studies, experimental, simulation or other application-related work showing how the theories put forward can be implemented. The state-of-the art research reported in this volume by an international team of contributors makes it an essential reference for researchers and postgraduate students in control, electrical, computer and mechanical engineering and computer science.
Download or read book Analysis and Design of Networked Control Systems under Attacks written by Yuan Yuan and published by CRC Press. This book was released on 2018-09-21 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book adopts a systematic view of the control systems in cyber-physical systems including the security control of the optimal control system, security control of the non-cooperative game system, quantify the impact of the Denial-of-Service attacks on the optimal control system, and the adaptive security control of the networked control systems. Because the cyber-physical system is a hybrid system, it adopts cross layer approach to handle the security control of the CPS. It presents a number of attack models according to the attack scenario and defense facilities, and a number of cross-layer co-design methodologies to secure the control of CPS.
Download or read book Networked Control Systems written by Magdi S. Mahmoud and published by Butterworth-Heinemann. This book was released on 2019-02-09 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Networked Control Systems: Cloud Control and Secure Control explores new technological developments in networked control systems (NCS), including new techniques, such as event-triggered, secure and cloud control. It provides the fundamentals and underlying issues of networked control systems under normal operating environments and under cyberphysical attack. The book includes a critical examination of the principles of cloud computing, cloud control systems design, the available techniques of secure control design to NCS's under cyberphysical attack, along with strategies for resilient and secure control of cyberphysical systems. Smart grid infrastructures are also discussed, providing diagnosis methods to analyze and counteract impacts. Finally, a series of practical case studies are provided to cover a range of NCS's. This book is an essential resource for professionals and graduate students working in the fields of networked control systems, signal processing and distributed estimation. - Provides coverage of cloud-based approaches to control systems and secure control methodologies to protect cyberphysical systems against various types of malicious attacks - Provides an overview of control research literature and explores future developments and solutions - Includes case studies that offer solutions for issues with modeling, quantization, packet dropout, time delay and communication constraints
Download or read book The Industrial Information Technology Handbook written by Richard Zurawski and published by CRC Press. This book was released on 2018-10-03 with total page 2656 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Industrial Information Technology Handbook focuses on existing and emerging industrial applications of IT, and on evolving trends that are driven by the needs of companies and by industry-led consortia and organizations. Emphasizing fast growing areas that have major impacts on industrial automation and enterprise integration, the Handbook covers topics such as industrial communication technology, sensors, and embedded systems. The book is organized into two parts. Part 1 presents material covering new and quickly evolving aspects of IT. Part 2 introduces cutting-edge areas of industrial IT. The Handbook presents material in the form of tutorials, surveys, and technology overviews, combining fundamentals and advanced issues, with articles grouped into sections for a cohesive and comprehensive presentation. The text contains 112 contributed reports by industry experts from government, companies at the forefront of development, and some of the most renowned academic and research institutions worldwide. Several of the reports on recent developments, actual deployments, and trends cover subject matter presented to the public for the first time.
Download or read book Control Engineering and Information Systems written by Zhijing Liu and published by CRC Press. This book was released on 2015-01-19 with total page 1054 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control Engineering and Information Systems contains the papers presented at the 2014 International Conference on Control Engineering and Information Systems (ICCEIS 2014, Yueyang, Hunan, China, 20-22 June 2014). All major aspects of the theory and applications of control engineering and information systems are addressed, including: – Intelligent systems – Teaching cases – Pattern recognition – Industry application – Machine learning – Systems science and systems engineering – Data mining – Optimization – Business process management – Evolution of public sector ICT – IS economics – IS security and privacy – Personal data markets – Wireless ad hoc and sensor networks – Database and system security – Application of spatial information system – Other related areas Control Engineering and Information Systems provides a valuable source of information for scholars, researchers and academics in control engineering and information systems.
Download or read book Self organizing control of networked systems written by René Schuh and published by Logos Verlag Berlin GmbH. This book was released on 2017-08-27 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents a novel distributed control paradigm for networked control systems in which the local control units of the subsystems exchange information, whenever this is necessary to fulfill an overall control aim. The local control units act in a self-organized way, which means that they adapt their communication structure depending on the current situation of the subsystems based on locally available information only. A new controller structure is proposed. The local control units are divided into three components fulfilling universal tasks to generate a situation-dependent communication structure: The feedback unit performs a local feedback by using local measurements to fulfill basic performance requirements. The observation unit detects the current situation of the subsystem by evaluating locally available information. The decision unit decides about the transmission of information from the corresponding subsystem to other local control units. Two self-organizing controllers for physically interconnected systems in which the local control units adapt the communication among each other depending on the current disturbances are introduced. Furthermore, three novel self-organizing controllers for synchronizing multi-agent systems within leader-follower structures by adapting the communication structure to situations like set-point changes, disturbances and communication faults are proposed. The concepts are applied in order to control a water supply system and a robot formation.
