Download or read book Optimization Methods in Engineering written by Mohit Tyagi and published by Springer Nature. This book was released on 2020-06-05 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises peer-reviewed contributions from the International Conference on Production and Industrial Engineering (CPIE) 2019. This volume provides insights into the current scenario and advances in the domain of industrial and production engineering in the context of optimum value. Optimization and its applicability in various areas of production and industrial engineering like selection of designing parameters and machining parameters, decisions related to conditions of optimum process/operation parameters, behavior of response variables, facilities planning and management, transportation and supply chain management, quality engineering, reliability and maintenance, product design and development, human factors and ergonomics, service system and service management, waste management, sustainable manufacturing and operations, systems design, and performance measurement are discussed in the book. Given the range of topics covered, this book can be useful for students, researchers, and professionals interested in latest optimization techniques related to industrial and production engineering.

Download or read book Taguchi Techniques for Quality Engineering written by Phillip J. Ross and published by McGraw Hill Professional. This book was released on 1996 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the Taguchi methodology as a systematic strategy for designing product and process tests that will reduce product or process variation. This text aims to make this method understandable to all professionals in quality control and non-statisticians.

Download or read book Proceedings of Malaysian International Tribology Conference 2015 written by Mariyam Jameelah Binti Ghazali and published by Malaysian Tribology Society. This book was released on 2015-11-16 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: This ebook is a compilation of papers presented at the Malaysian International Tribology Conference 2015 (MITC2015) - Penang, Malaysia on 16 ~ 17 November 2015.

Download or read book Design of Experiments in Production Engineering written by J. Paulo Davim and published by Springer. This book was released on 2015-11-06 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers design of experiments (DoE) applied in production engineering as a combination of manufacturing technology with applied management science. It presents recent research advances and applications of design experiments in production engineering and the chapters cover metal cutting tools, soft computing for modelling and optmization of machining, waterjet machining of high performance ceramics, among others.

Download or read book Modelling of Machining Operations written by J.C. Outeiro and published by Trans Tech Publications Ltd. This book was released on 2011-04-19 with total page 973 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected peer reviewed papers from the 17th CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS, May 12-13, 2011, Sintra, Portugal

Download or read book Numerical Optimization in Engineering and Sciences written by Debashis Dutta and published by Springer Nature. This book was released on 2020-04-07 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select peer-reviewed papers presented at the International Conference on Numerical Optimization in Engineering and Sciences (NOIEAS) 2019. The book covers a wide variety of numerical optimization techniques across all major engineering disciplines like mechanical, manufacturing, civil, electrical, chemical, computer, and electronics engineering. The major focus is on innovative ideas, current methods and latest results involving advanced optimization techniques. The contents provide a good balance between numerical models and analytical results obtained for different engineering problems and challenges. This book will be useful for students, researchers, and professionals interested in engineering optimization techniques.

Download or read book Machining of Hard Materials written by J. Paulo Davim and published by Springer Science & Business Media. This book was released on 2011-02-24 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hard machining is a relatively recent technology that can be defined as a machining operation, using tools with geometrically defined cutting edges, of a work piece that has hardness values typically in the 45-70HRc range. This operation always presents the challenge of selecting a cutting tool insert that facilitates high-precision machining of the component, but it presents several advantages when compared with the traditional methodology based in finish grinding operations after heat treatment of work pieces. Machining of Hard Materials aims to provide the reader with the fundamentals and recent advances in the field of hard machining of materials. All the chapters are written by international experts in this important field of research. They cover topics such as: • advanced cutting tools for the machining of hard materials; • the mechanics of cutting and chip formation; • surface integrity; • modelling and simulation; and • computational methods and optimization. Machining of Hard Materials can serve as a useful reference for academics, manufacturing and materials researchers, manufacturing and mechanical engineers, and professionals in machining and related industries. It can also be used as a text for advanced undergraduate or postgraduate students studying mechanical engineering, manufacturing, or materials.

Download or read book Recent Advances in Manufacturing Automation Design and Energy Technologies written by Sendhil Kumar Natarajan and published by Springer Nature. This book was released on 2021-10-11 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the proceedings of the 1st International Conference on Future Technologies in Manufacturing, Automation, Design and Energy 2020. The contents of this volume focus on recent technological advances in the field of manufacturing, automation, design and energy. Some of the topics covered include additive manufacturing, renewable energy resources, design automation, process automation and monitoring, etc. This volume will prove a valuable resource for those in academia and industry.

Download or read book Recent Trends in Design Materials and Manufacturing written by Manvandra Kumar Singh and published by Springer Nature. This book was released on 2022-04-29 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the select proceedings of the International Conference on Recent Advances in Design, Materials and Manufacturing (ICRADMM 2020). The topics covered include structural mechanics, kinematics and dynamics of machines, mechanical structures and stress analysis, noise and vibration analysis, fault detection and condition monitoring, optimization techniques, mechatronics & robotics, product design and development, tribology. The book also discusses various properties and performance attributes of modern-age design in mechanical engineering including their durability, workability, and carbon footprint. The book will be a valuable reference for researchers and professionals interested in sustainable development in mechanical engineering design and allied fields.

Download or read book Design for Six Sigma written by Kai Yang and published by McGraw Hill Professional. This book was released on 2003-06-11 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here's the book that clearly and logically answers the complex question quality managers and product developers face almost every day: WHICH PRODUCT DEVELOPMENT TOOLS SHOULD I USE AND WHEN? This much-needed, well-written roadmap for robust, efficient product development features: * All the coverage needed to implement six sigma in any manufacturing concern * A complete review of both traditional and contemporary design methods * Systems discussed include: DOE (Design Of Experiment), Taguchi Method, QFD (Quality Function Deployment), Axiomatic Design, and TRIZ (Theory for Inventive Problem-Solving) * Practical examples to highlight important elements of each system * A unique multi-systems approach to designing products, incorporating the traditional and contemporary methods discussed, detailing how and when to use them * Valuable assistance when preparing for certification exams

Download or read book Engineering Materials Research written by Tata Nancharaiah and published by Trans Tech Publications Ltd. This book was released on 2023-07-25 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special topic volume with invited peer-reviewed papers only

Download or read book Design of Experiments for Engineers and Scientists written by Jiju Antony and published by Elsevier. This book was released on 2014-02-22 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tools and techniques used in Design of Experiments (DoE) have been proven successful in meeting the challenge of continuous improvement in many manufacturing organisations over the last two decades. However research has shown that application of this powerful technique in many companies is limited due to a lack of statistical knowledge required for its effective implementation.Although many books have been written on this subject, they are mainly by statisticians, for statisticians and not appropriate for engineers. Design of Experiments for Engineers and Scientists overcomes the problem of statistics by taking a unique approach using graphical tools. The same outcomes and conclusions are reached as through using statistical methods and readers will find the concepts in this book both familiar and easy to understand.This new edition includes a chapter on the role of DoE within Six Sigma methodology and also shows through the use of simple case studies its importance in the service industry. It is essential reading for engineers and scientists from all disciplines tackling all kinds of manufacturing, product and process quality problems and will be an ideal resource for students of this topic. - Written in non-statistical language, the book is an essential and accessible text for scientists and engineers who want to learn how to use DoE - Explains why teaching DoE techniques in the improvement phase of Six Sigma is an important part of problem solving methodology - New edition includes a full chapter on DoE for services as well as case studies illustrating its wider application in the service industry

Download or read book High Speed Machining written by Kapil Gupta and published by Academic Press. This book was released on 2020-01-31 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-Speed Machining covers every aspect of this important subject, from the basic mechanisms of the technology, right through to possible avenues for future research. This book will help readers choose the best method for their particular task, how to set up their equipment to reduce chatter and wear, and how to use simulation tools to model high-speed machining processes. The different applications of each technology are discussed throughout, as are the latest findings by leading researchers in this field. For any researcher looking to understand this topic, any manufacturer looking to improve performance, or any manager looking to upgrade their plant, this is the most comprehensive and authoritative guide available. - Summarizes important R&D from around the world, focusing on emerging topics like intelligent machining - Explains the latest best practice for the optimization of high-speed machining processes for greater energy efficiency and machining precision - Provides practical advice on the testing and monitoring of HSM machines, drawing on practices from leading companies

Download or read book Drilling of Composite Materials written by J. Paulo Davim and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays, the use of composite materials has increased in various areas of science and technology due to their special properties, namely for these application in aircraft, automotive, defence and aerospace industries as well others advanced industries. Drilling is a frequently practised machining process in modern industry owing to the need for component assembly in composite structures. This book aims to provide the research and review studies in drilling of composite materials. The first three chapters provide information on delamination and damage reduction in drilling of composite materials. The following two chapters deal with influence of machining parameters on the delamination. The sixth chapter is focused on modelling of drilling aluminium matrix composites using artificial neural networks. The chapter seventh is dedicated study of analysis of delamination in drilling wood composite medium density fibreboards. Finally, the last chapter of this book is focused on studies on composite drilling - the state of the art. The present research book can be used as for final undergraduate engineering course (for example, mechanical, manufacturing, materials etc) or as a subject on machining/composites at the postgraduate level. Also, this research book can serve as a useful reference for academics, manufacturing and materials researchers, manufacturing, materials and mechanical engineers, professional in composites technology and related industries.

Download or read book Advances in Manufacturing Technology XXXIII written by Y. Jin and published by IOS Press. This book was released on 2019-08-22 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development and management of technologies and operations are key to the success of all types of manufacturing business. This book presents the proceedings of the 17th International Conference on Manufacturing Research (ICMR 2019), held in Belfast, UK, on 10 – 12 September 2019. ICMR has been the UK’s main manufacturing research conference for 34 years and an international conference since 2003. It brings together researchers, academics and industrialists to share their vision, knowledge and experience and discuss emerging trends and new challenges in manufacturing research. The conference theme of ICMR2019 was smart manufacturing, and the book includes the 82 papers presented at the conference (representing an acceptance rate of 69%). These have been divided into 13 parts, which cover topics ranging from robot automation and machining processes, additive manufacturing, composite manufacturing, design methods, to information management, quality control, production optimization and product lifecycle management. Providing an overview of current trends and developments, the book will be of interest to researchers and engineers in the relevant area of manufacturing processes, design and production management.

Download or read book Sustainable Machining written by J. Paulo Davim and published by Springer. This book was released on 2017-03-19 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview on current sustainable machining. Its chapters cover the concept in economic, social and environmental dimensions. It provides the reader with proper ways to handle several pollutants produced during the machining process. The book is useful on both undergraduate and postgraduate levels and it is of interest to all those working with manufacturing and machining technology.

Download or read book Advances in Production and Industrial Engineering written by P. M. Pandey and published by Springer Nature. This book was released on 2020-09-20 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the select proceedings of the International Conference on Emerging Trends in Mechanical and Industrial Engineering (ICETMIE) 2019. The conference covers current trends in thermal, design, industrial, production and other sub-disciplines of mechanical engineering. This volume focuses on different industrial and production engineering areas such as additive manufacturing, rapid prototyping, computer aided engineering, advanced manufacturing processes, manufacturing management and automation, sustainable manufacturing systems, metrology, manufacturing process optimization, operations research and decision-making models, production planning and inventory control, supply chain management, and quality engineering. The contents of this book will be useful for students, researchers and other professionals interested in industrial and production engineering.