Download or read book Optimization of Manufacturing Processes written by Kapil Gupta and published by Springer. This book was released on 2019-06-25 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a detailed understanding of optimization methods as they are implemented in a variety of manufacturing, fabrication and machining processes. It covers the implementation of statistical methods, multi-criteria decision making methods and evolutionary techniques for single and multi-objective optimization to improve quality, productivity, and sustainability in manufacturing. It reports on the theoretical aspects, special features, recent research and latest development in the field. Optimization of Manufacturing Processes is a valuable source of information for researchers and practitioners, as it fills the gap where no dedicated book is available on intelligent manufacturing/modeling and optimization in manufacturing. Readers will develop an understanding of the implementation of statistical and evolutionary techniques for modeling and optimization in manufacturing.

Download or read book New Technologies Development and Application VII written by Isak Karabegovic and published by Springer Nature. This book was released on with total page 781 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Optimization of Advanced Manufacturing Processes written by Sandip Kunar and published by CRC Press. This book was released on 2024-11-29 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimization for advanced manufacturing processes in fabrication is becoming increasingly important around the world across a range of industries because of its improved productivity, capabilities, efficacy, and sustainability characteristics. This new book explains how to optimize various industrial systems and processes utilizing new significant statistical and evolutionary methodologies. Statistical, multi-criteria decision-making, and evolutionary strategies for single- and multi-objective optimization are covered here, with relevant theoretical details, salient characteristics, implementation processes, effectiveness studies, and results in manufacturing. The chapters present a variety of advanced manufacturing processes and optimization techniques. Processes are described with basic explanations, characteristics, and applications in various technological and biomedical domains. The chapters address the processes prediction of mechanical properties, design and development of tools, impact of power supply, increasing machining precision and efficiency, genetic algorithm optimization, additive manufacturing, and much more. Providing a comprehensive study of advanced manufacturing processes, this volume is a valuable reference for engineers and R&D researchers involved in optimization for advanced manufacturing processes as well as for academics and postgraduate-level students in mechanical engineering, manufacturing engineering, and machining processes.

Download or read book Proceedings on 18th International Conference on Industrial Systems IS 20 written by Bojan Lalic and published by Springer Nature. This book was released on 2022-05-23 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book proposes theoretically developed and practically tested solutions for manufacturing and business improvements achieved in the period between two conferences. It enables presentation of new knowledge and exchange of practical experience in industrial systems engineering and management. It brings together prominent researchers and practitioners from faculties, scientific institutes, and different enterprises or other organizations .This is the 18th edition of the conference. The Department of Industrial Engineering and Management at the Faculty of Technical Sciences in Novi Sad organizes a scientific conference on industrial systems engineering and management field of science and practice, once in three years.

Download or read book Design of Experiments in Production Engineering written by J. Paulo Davim and published by Springer. This book was released on 2015-11-06 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers design of experiments (DoE) applied in production engineering as a combination of manufacturing technology with applied management science. It presents recent research advances and applications of design experiments in production engineering and the chapters cover metal cutting tools, soft computing for modelling and optmization of machining, waterjet machining of high performance ceramics, among others.

Download or read book Advanced Modeling and Optimization of Manufacturing Processes written by R. Venkata Rao and published by Springer Science & Business Media. This book was released on 2010-12-01 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Modeling and Optimization of Manufacturing Processes presents a comprehensive review of the latest international research and development trends in the modeling and optimization of manufacturing processes, with a focus on machining. It uses examples of various manufacturing processes to demonstrate advanced modeling and optimization techniques. Both basic and advanced concepts are presented for various manufacturing processes, mathematical models, traditional and non-traditional optimization techniques, and real case studies. The results of the application of the proposed methods are also covered and the book highlights the most useful modeling and optimization strategies for achieving best process performance. In addition to covering the advanced modeling, optimization and environmental aspects of machining processes, Advanced Modeling and Optimization of Manufacturing Processes also covers the latest technological advances, including rapid prototyping and tooling, micromachining, and nano-finishing. Advanced Modeling and Optimization of Manufacturing Processes is written for designers and manufacturing engineers who are responsible for the technical aspects of product realization, as it presents new models and optimization techniques to make their work easier, more efficient, and more effective. It is also a useful text for practitioners, researchers, and advanced students in mechanical, industrial, and manufacturing engineering.

Download or read book Soft Computing in Materials Development and its Sustainability in the Manufacturing Sector written by Amar Patnaik and published by CRC Press. This book was released on 2022-08-19 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the application of soft computing in materials and manufacturing sectors with the objective to offer an intelligent approach to improve the manufacturing process, material selection and characterization techniques for developing advanced new materials. It unveils different models and soft computing techniques applicable in the field of advanced materials and solves the problems to help the industry and scientists to develop sustainable materials for all purposes. The book focuses on the overall well-being of the environment for better sustenance and livelihood. Firstly, the authors discuss the implementation of soft computing in the various areas of engineering materials. They also review the latest intelligent technologies and algorithms related to the state-of-the-art methodologies of monitoring and effective implementation of sustainable engineering practices. Finally the authors examine the future generation of sustainable and intelligent monitoring techniques beneficial for manufacturing, and cover novel soft computing techniques for the purpose of effective manufacturing processes at par with the standards laid down by the International Standards of Organization (ISO). This book is intended for academics and researchers from all the fields of engineering interested in joining interdisciplinary initiatives on soft computing techniques for advanced materials and manufacturing.

Download or read book Modern Mechanical Engineering written by J. Paulo Davim and published by Springer Science & Business Media. This book was released on 2014-01-07 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers modern subjects of mechanical engineering such as nanomechanics and nanotechnology, mechatronics and robotics, computational mechanics, biomechanics, alternative energies, sustainability as well as all aspects related with mechanical engineering education. The chapters help enhance the understanding of both the fundamentals of mechanical engineering and its application to the solution of problems in modern industry. This book is suitable for students, both in final undergraduate mechanical engineering courses or at the graduate level. It also serves as a useful reference for academics, mechanical engineering researchers, mechanical, materials and manufacturing engineers, professionals in related with mechanical engineering.

Download or read book Machining Dynamics and Parameters Process Optimization written by Gorka Urbicain and published by MDPI. This book was released on 2021-03-19 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: As we move further into the 21st century, despite the fact that new technologies have emerged, machining remains the key operation to achieve high productivity and precision for high-added value parts in several sectors, but recent advances in computer applications should close the gap between simulations and industrial practices. This book, “Machining Dynamics and Parameters Process Optimization”, is oriented toward the different strategies and paths when it comes to increasing productivity and reliability in metal removal processes. The topics include the dynamic characterization of machine tools, experimental dampening techniques, and optimization algorithms combined with signal monitoring.

Download or read book Cohort Intelligence A Socio inspired Optimization Method written by Anand Jayant Kulkarni and published by Springer. This book was released on 2016-09-22 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Volume discusses the underlying principles and analysis of the different concepts associated with an emerging socio-inspired optimization tool referred to as Cohort Intelligence (CI). CI algorithms have been coded in Matlab and are freely available from the link provided inside the book. The book demonstrates the ability of CI methodology for solving combinatorial problems such as Traveling Salesman Problem and Knapsack Problem in addition to real world applications from the healthcare, inventory, supply chain optimization and Cross-Border transportation. The inherent ability of handling constraints based on probability distribution is also revealed and proved using these problems.

Download or read book Micro Cutting written by Dehong Huo and published by John Wiley & Sons. This book was released on 2013-07-30 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro-Cutting: Fundamentals and Applications comprehensively covers the state of the art research and engineering practice in micro/nano cutting: an area which is becoming increasingly important, especially in modern micro-manufacturing, ultraprecision manufacturing and high value manufacturing. This book provides basic theory, design and analysis of micro-toolings and machines, modelling methods and techniques, and integrated approaches for micro-cutting. The fundamental characteristics, modelling, simulation and optimization of micro/nano cutting processes are emphasized with particular reference to the predictabilty, producibility, repeatability and productivity of manufacturing at micro and nano scales. The fundamentals of micro/nano cutting are applied to a variety of machining processes including diamond turning, micromilling, micro/nano grinding/polishing, ultraprecision machining, and the design and implementation of micro/nano cutting process chains and micromachining systems. Key features • Contains contributions from leading global experts • Covers the fundamental theory of micro-cutting • Presents applications in a variety of machining processes • Includes examples of how to implement and apply micro-cutting for precision and micro-manufacturing Micro-Cutting: Fundamentals and Applications is an ideal reference for manufacturing engineers, production supervisors, tooling engineers, planning and application engineers, as well as machine tool designers. It is also a suitable textbook for postgraduate students in the areas of micro-manufacturing, micro-engineering and advanced manufacturing methods.

Download or read book Advanced Design and Manufacture to Gain a Competitive Edge written by Xiu-Tian Yan and published by Springer Science & Business Media. This book was released on 2008-07-30 with total page 883 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing industry has been one of the key drivers for recent rapid global economic development. Globalisation of manufacturing industries due to distributed design and labour advantage leads to a drive and thirst for technological advancements and expertise in the fields of advanced design and manufacturing. This development results in many economical benefits to and improvement of quality of life for many people all over the world. This rapid development also creates many opportunities and challenges for both industrialists and academics, as the design requirements and constraints have completely changed in this global design and manufacture environment. Consequently the way to design, manufacture and realise products have changed as well. More and more design and manufacture tasks can now be undertaken within computer environment using simulation and virtual reality technologies. These technological advancements hence support more advanced product development and manufacturing operations in such a global design and manufacturing environment. In this global context and scenario, both industry and the academia have an urgent need to equip themselves with the latest knowledge, technology and methods developed for engineering design and manufacture.

Download or read book Optimization in the Agri Food Supply Chain written by Mayssa Koubaa and published by John Wiley & Sons. This book was released on 2024-10-08 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modern Optimization Techniques for Advanced Machining written by Imhade P. Okokpujie and published by Springer Nature. This book was released on 2023-07-21 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced manufacturing via computer numerical machining is the art of producing mechanical components employed in aerospace, automobile, and industrial applications where a high level of accuracy is needed. This book focuses on the nano-machining of aluminum alloy and its optimization. The application of aluminum alloy in the manufacturing industry has increased tremendously due to its lightweight to high strength ratio and high-level resistance to corrosion. However, aluminum alloy has some challenges during the machining and manufacturing stage in order to solve real-life manufacturing challenges in advanced machining operation for sustainable production processes. Therefore, it is a need for the implementation of a general algebraic modeling system (GAMS) and other metaheuristic techniques for problem solving and to effectively develop mathematical models for high accuracy prediction and optimization under nano-lubrication machining conditions. This book discusses majorly on the major three responses in machining such as surface roughness, cutting force, and material removal rate, which will give an excellent guide to undergraduate and postgraduate students, senior research fellows in academia, operational, and strategic staff in manufacturing industries.

Download or read book Machining Recent Advances Applications and Challenges written by Luis Norberto L´opez de Lacalle and published by MDPI. This book was released on 2019-08-26 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Special Issue Machining—Recent Advances, Applications and Challenges is intended as a humble collection of some of the hottest topics in machining. The manufacturing industry is a varying and challenging environment where new advances emerge from one day to another. In recent years, new manufacturing procedures have retained increasing attention from the industrial and scientific community. However, machining still remains the key operation to achieve high productivity and precision for high-added value parts. Continuous research is performed, and new ideas are constantly considered. This Special Issue summarizes selected high-quality papers which were submitted, peer-reviewed, and recommended by experts. It covers some (but not only) of the following topics: High performance operations for difficult-to-cut alloys, wrought and cast materials, light alloys, ceramics, etc.; Cutting tools, grades, substrates and coatings. Wear damage; Advanced cooling in machining: Minimum quantity of lubricant, dry or cryogenics; Modelling, focused on the reduction of risks, the process outcome, and to maintain surface integrity; Vibration problems in machines: Active and passive/predictive methods, sources, diagnosis and avoidance; Influence of machining in new concepts of machine–tool, and machine static and dynamic behaviors; Machinability of new composites, brittle and emerging materials; Assisted machining processes by high-pressure, laser, US, and others; Introduction of new analytics and decision making into machining programming. We wish to thank the reviewers and staff from Materials for their comments, advice, suggestions and invaluable support during the development of this Special Issue.

Download or read book Modeling and Optimization in Manufacturing written by Catalin I. Pruncu and published by John Wiley & Sons. This book was released on 2021-07-19 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the state-of-the-art in multiscale modeling and optimization in manufacturing from two leading voices in the field Modeling and Optimization in Manufacturing delivers a comprehensive approach to various manufacturing processes and shows readers how multiscale modeling and optimization processes help improve upon them. The book elaborates on the foundations and applications of computational modeling and optimization processes, as well as recent developments in the field. It offers discussions of manufacturing processes, including forming, machining, casting, joining, coating, and additive manufacturing, and how computer simulations have influenced their development. Examples for each category of manufacturing are provided in the text, and industrial applications are described for the reader. The distinguished authors also provide an insightful perspective on likely future trends and developments in manufacturing modeling and optimization, including the use of large materials databases and machine learning. Readers will also benefit from the inclusion of: A thorough introduction to the origins of manufacturing, the history of traditional and advanced manufacturing, and recent progress in manufacturing An exploration of advanced manufacturing and the environmental impact and significance of manufacturing Practical discussions of the economic importance of advanced manufacturing An examination of the sustainability of advanced manufacturing, and developing and future trends in manufacturing Perfect for materials scientists, mechanical engineers, and process engineers, Modeling and Optimization in Manufacturing will also earn a place in the libraries of engineering scientists in industries seeking a one-stop reference on multiscale modeling and optimization in manufacturing.

Download or read book Advanced Engineering Optimization Through Intelligent Techniques written by R. Venkata Rao and published by Springer. This book was released on 2019-07-09 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select peer-reviewed papers presented at the International Conference on Advanced Engineering Optimization Through Intelligent Techniques (AEOTIT) 2018. The book combines contributions from academics and industry professionals, and covers advanced optimization techniques across all major engineering disciplines like mechanical, manufacturing, civil, automobile, electrical, chemical, computer and electronics engineering. Different optimization techniques and algorithms such as genetic algorithm (GA), differential evolution (DE), simulated annealing (SA), particle swarm optimization (PSO), artificial bee colony (ABC) algorithm, artificial immune algorithm (AIA), teaching-learning-based optimization (TLBO) algorithm and many other latest meta-heuristic techniques and their applications are discussed. This book will serve as a valuable reference for students, researchers and practitioners and help them in solving a wide range of optimization problems.