Download or read book Optimization for Control Observation and Safety written by Guillermo Valencia-Palomo and published by MDPI. This book was released on 2020-04-01 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical optimization is the selection of the best element in a set with respect to a given criterion. Optimization has become one of the most used tools in control theory to compute control laws, adjust parameters (tuning), estimate states, fit model parameters, find conditions in order to fulfill a given closed-loop property, among others. Optimization also plays an important role in the design of fault detection and isolation systems to prevent safety hazards and production losses that require the detection and identification of faults, as early as possible to minimize their impacts by implementing real-time fault detection and fault-tolerant systems. Recently, it has been proven that many optimization problems with convex objective functions and linear matrix inequality (LMI) constraints can be solved easily and efficiently using existing software, which increases the flexibility and applicability of the control algorithms. Therefore, real-world control systems need to comply with several conditions and constraints that have to be taken into account in the problem formulation, which represents a challenge in the application of the optimization algorithms. This book offers an overview of the state-of-the-art of the most advanced optimization techniques and their applications in control engineering.

Download or read book Optimization in Control Applications written by Guillermo Valencia-Palomo and published by MDPI. This book was released on 2019-01-10 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Optimization in Control Applications" that was published in MCA

Download or read book Learning and Intelligent Optimization written by Dimitris E. Simos and published by Springer Nature. This book was released on 2023-02-04 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 16th International Conference on Learning and Intelligent Optimization, LION 16, which took place in Milos Island, Greece, in June 2022. The 36 full papers and 3 short papers presented in this volume were carefully reviewed and selected from 60 submissions. LION deals with automatic solver configuration, parallel methods, intelligent optimization, nature-inspired algorithms, hard combinatorial optimization problems, DC learning, computational intelligence, and others. The contributions were organized in topical sections as follows: Invited Papers; Contributed Papers.

Download or read book Multi Objective Optimization System Designs and Their Applications written by Bor-Sen Chen and published by CRC Press. This book was released on 2023-12-05 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces multi-objective design methods to solve multi-objective optimization problems (MOPs) of linear/nonlinear dynamic systems under intrinsic random fluctuation and external disturbance. The MOPs of multiple targets for systems are all transformed into equivalent linear matrix inequality (LMI)-constrained MOPs. Corresponding reverse-order LMI-constrained multi-objective evolution algorithms are introduced to solve LMI-constrained MOPs using MATLAB®. All proposed design methods are based on rigorous theoretical results, and their applications are focused on more practical engineering design examples. Features: Discusses multi-objective optimization from an engineer’s perspective. Contains the theoretical design methods of multi-objective optimization schemes. Includes a wide spectrum of recent research topics in control design, especially for stochastic mean field diffusion problems. Covers practical applications in each chapter, like missile guidance design, economic and financial systems, power control tracking, minimization design in communication, and so forth. Explores practical multi-objective optimization design examples in control, signal processing, communication, and cyber-financial systems. This book is aimed at researchers and graduate students in electrical engineering, control design, and optimization.

Download or read book Modelling Optimization and Control of Biomedical Systems written by Efstratios N. Pistikopoulos and published by John Wiley & Sons. This book was released on 2018-01-09 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shows the newest developments in the field of multi-parametric model predictive control and optimization and their application for drug delivery systems This book is based on the Modelling, Control and Optimization of Biomedical Systems (MOBILE) project, which was created to derive intelligent computer model-based systems for optimization of biomedical drug delivery systems in the cases of diabetes, anaesthesia, and blood cancer. These systems can ensure reliable and fast calculation of the optimal drug dosage without the need for an online computer—while taking into account the specifics and constraints of the patient model, flexibility to adapt to changing patient characteristics and incorporation of the physician’s performance criteria, and maintaining the safety of the patients. Modelling Optimization and Control of Biomedical Systems covers: mathematical modelling of drug delivery systems; model analysis, parameter estimation, and approximation; optimization and control; sensitivity analysis & model reduction; multi-parametric programming and model predictive control; estimation techniques; physiologically-based patient model; control design for volatile anaesthesia; multiparametric model based approach to intravenous anaesthesia; hybrid model predictive control strategies; Type I Diabetes Mellitus; in vitro and in silico block of the integrated platform for the study of leukaemia; chemotherapy treatment as a process systems application; and more. Introduces readers to the Modelling, Control and Optimization of Biomedical Systems (MOBILE) project Presents in detail the theoretical background, computational tools, and methods that are used in all the different biomedical systems Teaches the theory for multi-parametric mixed-integer programming and explicit optimal control of volatile anaesthesia Provides an overview of the framework for modelling, optimization, and control of biomedical systems This book will appeal to students, researchers, and scientists working on the modelling, control, and optimization of biomedical systems and to those involved in cancer treatment, anaesthsia, and drug delivery systems.

Download or read book Optimization and Optimal Control in Automotive Systems written by Harald Waschl and published by Springer. This book was released on 2014-03-20 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book demonstrates the use of the optimization techniques that are becoming essential to meet the increasing stringency and variety of requirements for automotive systems. It shows the reader how to move away from earlier approaches, based on some degree of heuristics, to the use of more and more common systematic methods. Even systematic methods can be developed and applied in a large number of forms so the text collects contributions from across the theory, methods and real-world automotive applications of optimization. Greater fuel economy, significant reductions in permissible emissions, new drivability requirements and the generally increasing complexity of automotive systems are among the criteria that the contributing authors set themselves to meet. In many cases multiple and often conflicting requirements give rise to multi-objective constrained optimization problems which are also considered. Some of these problems fall into the domain of the traditional multi-disciplinary optimization applied to system, sub-system or component design parameters and is performed based on system models; others require applications of optimization directly to experimental systems to determine either optimal calibration or the optimal control trajectory/control law. Optimization and Optimal Control in Automotive Systems reflects the state-of-the-art in and promotes a comprehensive approach to optimization in automotive systems by addressing its different facets, by discussing basic methods and showing practical approaches and specific applications of optimization to design and control problems for automotive systems. The book will be of interest both to academic researchers, either studying optimization or who have links with the automotive industry and to industrially-based engineers and automotive designers.

Download or read book Key Technologies for Safety Construction of Mined Subsea Tunnels written by Dingli Zhang and published by Springer Nature. This book was released on 2023-03-16 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book puts forward a technological system for the construction of subsea tunnel using drilling and blasting method. Taking the water-induced disaster as the core risk, the safety guarantee system for large cross-sectional subsea tunnels is established. The composite grouting technology referred to ground reinforcement and water plugging is established, which breaks through the technical bottleneck of subsea tunnel construction in highly permeable strata. The process control theory based on water inrush mechanism is created, which gets rid of the over-dependence on engineering experience for disaster control of submarine tunnel. An active control waterproof drainage system based on the synergy of reinforcement ring and support system is invented to solve the contradiction between the control of water displacement and water pressure. The above-mentioned achievements have been successfully applied in the first three large cross-sectional subsea tunnels in China, and have played a key role in the construction safety. The proposed technological system can improve the overall construction level of subsea tunnel, which can provide reference for the design and construction of subsea tunnels, especially for those crossing through weakness zones.

Download or read book Urban Transportation Abstracts written by and published by . This book was released on 1984 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Optimization for Decision Making written by Víctor Yepes and published by . This book was released on 2020-10-08 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the current context of the electronic governance of society, both administrations and citizens are demanding greater participation of all the actors involved in the decision-making process relative to the governance of society. This book presents collective works published in the recent Special Issue (SI) entitled "Optimization for Decision Making". These works give an appropriate response to the new challenges raised, the decision-making process can be done by applying different methods and tools, as well as using different objectives. In real-life problems, the formulation of decision-making problems and application of optimization techniques to support decisions are particularly complex and a wide range of optimization techniques and methodologies are used to minimize risks, improve quality in making decisions, or, in general, to solve problems. In addition, a sensitivity or robustness analysis should be done to validate/analyze the influence of uncertainty regarding decision-making. This book brings together a collection of inter-/multi-disciplinary works applied to the optimization for decision making in a coherent manner.

Download or read book Dependable Software Engineering Theories Tools and Applications written by Holger Hermanns and published by Springer Nature. This book was released on 2023-12-14 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 9th International Symposium on Dependable Software Engineering, SETTA 2023, held in Nanjing, China, during November 27-29, 2023. The 24 full papers presented in this volume were carefully reviewed and selected from 78 submissions. They deal with latest research results and ideas on bridging the gap between formal methods and software engineering.

Download or read book Veterinary Clinical Pathology written by Kathleen P. Freeman and published by CRC Press. This book was released on 2015-06-16 with total page 1340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Veterinary Clinical Pathology: A Case-Based Approach presents 200 cases with questions for those interested in improving their skills in veterinary clinical pathology. It emphasises an understanding of basic pathophysiologic mechanisms of disease, differential diagnoses and recognition of patterns associated with various diseases or conditions. Topics discussed include haematology, clinical chemistry, endocrinology, acid-base and blood gas analysis, haemostasis, urinalysis, biological variation and quality control. Species covered include the cat, dog and horse, with additional material on ruminants. Cases vary in difficulty, allowing beginners to improve their clinicopathologic skills while more complicated cases, or cases treating unfamiliar topics, are included for experienced readers. This book is a helpful revision aid for those in training as well as for those in practice who are pursuing continuing education. It is also a valuable resource for veterinary nurses and technicians.

Download or read book Pesticide Externality Policy an Optimal Control Approach written by Richard Edgar Howitt and published by . This book was released on 1975 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Man Machine Environment System Engineering Proceedings of the 21st International Conference on MMESE written by Shengzhao Long and published by Springer Nature. This book was released on 2021-09-21 with total page 899 pages. Available in PDF, EPUB and Kindle. Book excerpt: Man-Machine-Environment System Engineering: Proceedings of the 21st Conference on MMESE is the academic showcase of best research papers selected from more than 500 submissions each year. From this book reader will learn the best research topics and the latest development trend in MMESE design theory and other human-centered system application.MMESE focus mainly on the relationship between Man, Machine and Environment. It studies the optimum combination of man-machine-environment systems. In the system, the Man means the working people as the subject in the workplace (e.g. operator, decision-maker); the Machine means the general name of any object controlled by the Man (including tool, Machinery, Computer, system and technology), the Environment means the specially working conditions under which Man and Machine occupy together(e.g. temperature, noise, vibration, hazardous gases etc.). The three goals of the optimization of the system are safety, efficiency and economy.In 1981 with direct support from one of the greatest modern Chinese scientists, Qian Xuesen, Man-Machine-Environment System Engineering (MMESE), the integrated and advanced science research topic was established in China by Professor Shengzhao Long. In the letter to Shengzhao Long, in October 22nd, 1993, Qian Xuesen wrote: “You have created a very important modern science subject and technology in China!”.

Download or read book Process Operational Safety and Cybersecurity written by Zhe Wu and published by Springer Nature. This book was released on 2021-06-09 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is focused on the development of rigorous, yet practical, methods for the design of advanced process control systems to improve process operational safety and cybersecurity for a wide range of nonlinear process systems. Process Operational Safety and Cybersecurity develops designs for novel model predictive control systems accounting for operational safety considerations, presents theoretical analysis on recursive feasibility and simultaneous closed-loop stability and safety, and discusses practical considerations including data-driven modeling of nonlinear processes, characterization of closed-loop stability regions and computational efficiency. The text then shifts focus to the design of integrated detection and model predictive control systems which improve process cybersecurity by efficiently detecting and mitigating the impact of intelligent cyber-attacks. The book explores several key areas relating to operational safety and cybersecurity including: machine-learning-based modeling of nonlinear dynamical systems for model predictive control; a framework for detection and resilient control of sensor cyber-attacks for nonlinear systems; insight into theoretical and practical issues associated with the design of control systems for process operational safety and cybersecurity; and a number of numerical simulations of chemical process examples and Aspen simulations of large-scale chemical process networks of industrial relevance. A basic knowledge of nonlinear system analysis, Lyapunov stability techniques, dynamic optimization, and machine-learning techniques will help readers to understand the methodologies proposed. The book is a valuable resource for academic researchers and graduate students pursuing research in this area as well as for process control engineers. Advances in Industrial Control reports and encourages the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Stochastic Optimization Methods written by Kurt Marti and published by Springer. This book was released on 2015-02-21 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines optimization problems that in practice involve random model parameters. It details the computation of robust optimal solutions, i.e., optimal solutions that are insensitive with respect to random parameter variations, where appropriate deterministic substitute problems are needed. Based on the probability distribution of the random data and using decision theoretical concepts, optimization problems under stochastic uncertainty are converted into appropriate deterministic substitute problems. Due to the probabilities and expectations involved, the book also shows how to apply approximative solution techniques. Several deterministic and stochastic approximation methods are provided: Taylor expansion methods, regression and response surface methods (RSM), probability inequalities, multiple linearization of survival/failure domains, discretization methods, convex approximation/deterministic descent directions/efficient points, stochastic approximation and gradient procedures and differentiation formulas for probabilities and expectations. In the third edition, this book further develops stochastic optimization methods. In particular, it now shows how to apply stochastic optimization methods to the approximate solution of important concrete problems arising in engineering, economics and operations research.

Download or read book Optimal State Estimation for Process Monitoring Fault Diagnosis and Control written by Ch. Venkateswarlu and published by Elsevier. This book was released on 2022-01-31 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimal State Estimation for Process Monitoring, Fault Diagnosis and Control presents various mechanistic model based state estimators and data-driven model based state estimators with a special emphasis on their development and applications to process monitoring, fault diagnosis and control. The design and analysis of different state estimators are highlighted with a number of applications and case studies concerning to various real chemical and biochemical processes. The book starts with the introduction of basic concepts, extending to classical methods and successively leading to advances in this field. Design and implementation of various classical and advanced state estimation methods to solve a wide variety of problems makes this book immensely useful for the audience working in different disciplines in academics, research and industry in areas concerning to process monitoring, fault diagnosis, control and related disciplines. Describes various classical and advanced versions of mechanistic model based state estimation algorithms Describes various data-driven model based state estimation techniques Highlights a number of real applications of mechanistic model based and data-driven model based state estimators/soft sensors Beneficial to those associated with process monitoring, fault diagnosis, online optimization, control and related areas