Download or read book Optimization Driven Design and Operation of Foundry Fabricated Silicon Photonics written by Jason Chi Chun Mak and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Motivated by growing capabilities to realize geometrically complex silicon (Si) devices and large scale photonic integrated circuits (PICs), this thesis explores the use of optimization algorithms for design and operation of Si photonics. Optimization procedures are implemented for designing and operating grating couplers, power splitters, and microring optical filters at telecommunication wavelengths. The devices reported in this thesis were fabricated in foundry Si photonics processes at A*STAR Institute of Microelectronics or CEA-Leti using deep ultra-violet lithography on 8" wafers. First, we present an optimization design procedure for bi-layer silicon nitride-on-silicon (SiN-on-Si) grating couplers (GCs). We designed the first SiN-on-Si GCs for the O-band in a new platform. Cross-wafer measurements showed a median peak coupling efficiency of -2.1 dB and a 1-dB bandwidth of 70.8 nm. We also present 3-layer SiN-SiN-Si one-dimensional polarization-independent grating couplers (PI-GCs) designed by optimization methods. The best-performing PI-GC had a peak coupling efficiency of -4.8 dB and a 1-dB polarization-dependent loss bandwidth of >100 nm, setting a record for PI-GCs. The higher than expected loss was likely due to fabrication imperfections in one of the SiN layers. Next, we report the first topology-optimized devices fabricated in a foundry process, a Si photonic 2x2 3-dB splitter within a 4.8 um x 4.8 um footprint. Despite not respecting design rules, the design with the smaller cells had lower insertion losses and broader bandwidth and showed consistent behavior across the wafer. However, results point towards the need to improve consistency between simulation the fabricated devices in future work. Finally, we demonstrate multi-variable tuning control that incorporates optimization algorithms to guide the tuning of multiple phase-shifters simultaneously. Multi-variable control becomes indispensable for PICs with a large (” 10) number of constituent devices by reducing the number of electrical inputs/outputs and simplifying packaging. Repeatable resonance alignment and wavelength tracking in a 5-ring optical filter and a programmable 2-ring Butterworth filter are demonstrated. An application to switch matrix tuning is also explored. Taken together, this thesis showcases how optimization methods can open up new directions for advancing the field of foundry fabricated Si photonics.
Download or read book Silicon Photonics for High Performance Computing and Beyond written by Mahdi Nikdast and published by CRC Press. This book was released on 2021-11-17 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon photonics is beginning to play an important role in driving innovations in communication and computation for an increasing number of applications, from health care and biomedical sensors to autonomous driving, datacenter networking, and security. In recent years, there has been a significant amount of effort in industry and academia to innovate, design, develop, analyze, optimize, and fabricate systems employing silicon photonics, shaping the future of not only Datacom and telecom technology but also high-performance computing and emerging computing paradigms, such as optical computing and artificial intelligence. Different from existing books in this area, Silicon Photonics for High-Performance Computing and Beyond presents a comprehensive overview of the current state-of-the-art technology and research achievements in applying silicon photonics for communication and computation. It focuses on various design, development, and integration challenges, reviews the latest advances spanning materials, devices, circuits, systems, and applications. Technical topics discussed in the book include: • Requirements and the latest advances in high-performance computing systems • Device- and system-level challenges and latest improvements to deploy silicon photonics in computing systems • Novel design solutions and design automation techniques for silicon photonic integrated circuits • Novel materials, devices, and photonic integrated circuits on silicon • Emerging computing technologies and applications based on silicon photonics Silicon Photonics for High-Performance Computing and Beyond presents a compilation of 19 outstanding contributions from academic and industry pioneers in the field. The selected contributions present insightful discussions and innovative approaches to understand current and future bottlenecks in high-performance computing systems and traditional computing platforms, and the promise of silicon photonics to address those challenges. It is ideal for researchers and engineers working in the photonics, electrical, and computer engineering industries as well as academic researchers and graduate students (M.S. and Ph.D.) in computer science and engineering, electronic and electrical engineering, applied physics, photonics, and optics.
Download or read book Silicon Photonics Design written by Lukas Chrostowski and published by . This book was released on 2015 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: From design and simulation through to testing and fabrication, this hands-on introduction to silicon photonics engineering equips students with everything they need to begin creating foundry-ready designs. In-depth discussion of real-world issues and fabrication challenges ensures that students are fully equipped for careers in industry. Step-by-step tutorials, straightforward examples, and illustrative source code fragments guide students through every aspect of the design process, providing a practical framework for developing and refining key skills. Offering industry-ready expertise, the text supports existing PDKs for CMOS UV-lithography foundry services (OpSIS, ePIXfab, imec, LETI, IME and CMC) and the development of new kits for proprietary processes and clean-room based research. Accompanied by additional online resources to support students, this is the perfect learning package for senior undergraduate and graduate students studying silicon photonics design, and academic and industrial researchers involved in the development and manufacture of new silicon photonics systems.
Download or read book Silicon Photonics Design written by Lukas Chrostowski and published by Cambridge University Press. This book was released on 2015-03-12 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This hands-on introduction to silicon photonics engineering equips students with everything they need to begin creating foundry-ready designs.
Download or read book Silicon Photonics for High Performance Computing and Beyond written by Mahdi Nikdast and published by CRC Press. This book was released on 2021-11-16 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon photonics is beginning to play an important role in driving innovations in communication and computation for an increasing number of applications, from health care and biomedical sensors to autonomous driving, datacenter networking, and security. In recent years, there has been a significant amount of effort in industry and academia to innovate, design, develop, analyze, optimize, and fabricate systems employing silicon photonics, shaping the future of not only Datacom and telecom technology but also high-performance computing and emerging computing paradigms, such as optical computing and artificial intelligence. Different from existing books in this area, Silicon Photonics for High-Performance Computing and Beyond presents a comprehensive overview of the current state-of-the-art technology and research achievements in applying silicon photonics for communication and computation. It focuses on various design, development, and integration challenges, reviews the latest advances spanning materials, devices, circuits, systems, and applications. Technical topics discussed in the book include: • Requirements and the latest advances in high-performance computing systems • Device- and system-level challenges and latest improvements to deploy silicon photonics in computing systems • Novel design solutions and design automation techniques for silicon photonic integrated circuits • Novel materials, devices, and photonic integrated circuits on silicon • Emerging computing technologies and applications based on silicon photonics Silicon Photonics for High-Performance Computing and Beyond presents a compilation of 19 outstanding contributions from academic and industry pioneers in the field. The selected contributions present insightful discussions and innovative approaches to understand current and future bottlenecks in high-performance computing systems and traditional computing platforms, and the promise of silicon photonics to address those challenges. It is ideal for researchers and engineers working in the photonics, electrical, and computer engineering industries as well as academic researchers and graduate students (M.S. and Ph.D.) in computer science and engineering, electronic and electrical engineering, applied physics, photonics, and optics.
Download or read book Integrated Photonics for Data Communication Applications written by Madeleine Glick and published by Elsevier. This book was released on 2023-07-26 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated Photonics for Data Communications Applications reviews the key concepts, design principles, performance metrics and manufacturing processes from advanced photonic devices to integrated photonic circuits. The book presents an overview of the trends and commercial needs of data communication in data centers and high-performance computing, with contributions from end users presenting key performance indicators. In addition, the fundamental building blocks are reviewed, along with the devices (lasers, modulators, photodetectors and passive devices) that are the individual elements that make up the photonic circuits. These chapters include an overview of device structure and design principles and their impact on performance. Following sections focus on putting these devices together to design and fabricate application-specific photonic integrated circuits to meet performance requirements, along with key areas and challenges critical to the commercial manufacturing of photonic integrated circuits and the supply chains being developed to support innovation and market integration are discussed. This series is led by Dr. Lionel Kimerling Executive at AIM Photonics Academy and Thomas Lord Professor of Materials Science and Engineering at MIT and Dr. Sajan Saini Education Director at AIM Photonics Academy at MIT. Each edited volume features thought-leaders from academia and industry in the four application area fronts (data communications, high-speed wireless, smart sensing, and imaging) and addresses the latest advances. Includes contributions from leading experts and end-users across academia and industry working on the most exciting research directions of integrated photonics for data communications applications Provides an overview of data communication-specific integrated photonics starting from fundamental building block devices to photonic integrated circuits to manufacturing tools and processes Presents key performance metrics, design principles, performance impact of manufacturing variations and operating conditions, as well as pivotal performance benchmarks
Download or read book Silicon Photonics IV written by David J. Lockwood and published by Springer Nature. This book was released on 2021-06-08 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fourth book in the series Silicon Photonics gathers together reviews of recent advances in the field of silicon photonics that go beyond already established and applied concepts in this technology. The field of research and development in silicon photonics has moved beyond improvements of integrated circuits fabricated with complementary metal–oxide–semiconductor (CMOS) technology to applications in engineering, physics, chemistry, materials science, biology, and medicine. The chapters provided in this book by experts in their fields thus cover not only new research into the highly desired goal of light production in Group IV materials, but also new measurement regimes and novel technologies, particularly in information processing and telecommunication. The book is suited for graduate students, established scientists, and research engineers who want to update their knowledge in these new topics.
Download or read book Silicon Photonics II written by David J. Lockwood and published by Springer Science & Business Media. This book was released on 2010-10-13 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is volume II of a series of books on silicon photonics. It gives a fascinating picture of the state-of-the-art in silicon photonics from a component perspective. It presents a perspective on what can be expected in the near future. It is formed from a selected number of reviews authored by world leaders in the field, and is written from both academic and industrial viewpoints. An in-depth discussion of the route towards fully integrated silicon photonics is presented. This book will be useful not only to physicists, chemists, materials scientists, and engineers but also to graduate students who are interested in the fields of micro- and nanophotonics and optoelectronics.
Download or read book Handbook of Silicon Photonics written by Laurent Vivien and published by Taylor & Francis. This book was released on 2016-04-19 with total page 831 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of integrated silicon photonic circuits has recently been driven by the Internet and the push for high bandwidth as well as the need to reduce power dissipation induced by high data-rate signal transmission. To reach these goals, efficient passive and active silicon photonic devices, including waveguide, modulators, photodetectors,
Download or read book Programmable Integrated Photonics written by José Capmany and published by . This book was released on 2020-02-21 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the first comprehensive, up-to-date and self-contained introduction to the emergent field of Programmable Integrated Photonics (PIP). It covers both theoretical and practical aspects, ranging from basic technologies and the building of photonic component blocks, to designalternatives and principles of complex programmable photonic circuits, their limiting factors, techniques for characterization and performance monitoring/control, and their salient applications both in the classical as well as in the quantum information fields. The book concentrates and focusesmainly on the distinctive features of programmable photonics, as compared to more traditional ASPIC approaches.After some years during which the Application Specific Photonic Integrated Circuit (ASPIC) paradigm completely dominated the field of integrated optics, there has been an increasing interest in PIP. The rising interest in PIP is justified by the surge in a number of emerging applications that callfor true flexibility and reconfigurability, as well as low-cost, compact, and low-power consuming devices.Programmable Integrated Photonics is a new paradigm that aims at designing common integrated optical hardware configurations, which by suitable programming, can implement a variety of functionalities. These in turn can be exploited as basic operations in many application fields. Programmabilityenables, by means of external control signals, both chip reconfiguration for multifunction operation, as well as chip stabilization against non-ideal operations due to fluctuations in environmental conditions and fabrication errors. Programming also allows for the activation of parts of the chip,which are not essential for the implementation of a given functionality, but can be of help in reducing noise levels through the diversion of undesired reflections.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Neuromorphic Photonics written by Paul R. Prucnal and published by CRC Press. This book was released on 2017-05-08 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book sets out to build bridges between the domains of photonic device physics and neural networks, providing a comprehensive overview of the emerging field of "neuromorphic photonics." It includes a thorough discussion of evolution of neuromorphic photonics from the advent of fiber-optic neurons to today’s state-of-the-art integrated laser neurons, which are a current focus of international research. Neuromorphic Photonics explores candidate interconnection architectures and devices for integrated neuromorphic networks, along with key functionality such as learning. It is written at a level accessible to graduate students, while also intending to serve as a comprehensive reference for experts in the field.
Download or read book Nonlinear Meta Optics written by Costantino De Angelis and published by CRC Press. This book was released on 2020-05-20 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses fabrication as well as characterization and modeling of semiconductor nanostructures in the optical regime, with a focus on nonlinear effects. The visible range as well as near and far infrared spectral region will be considered with a view to different envisaged applications. The book covers the current key challenges of the research in the area, including: exploiting new material platforms, fully extending the device operation into the nonlinear regime, adding re-configurability to the envisaged devices and proposing new modeling tools to help in conceiving new functionalities. • Explores several topics in the field of semiconductor nonlinear nanophotonics, including fabrication, characterization and modeling of semiconductor nanostructures in the optical regime, with a focus on nonlinear effects • Describes the research challenges in the field of optical metasurfaces in the nonlinear regime • Reviews the use and achievements of all-dielectric nanoantennas for strengthening the nonlinear optical response • Describes both theoretical and experimental aspects of photonic devices based on semiconductor optical nanoantennas and metasurfaces • Gathers contributions from several leading groups in this research field to provide a thorough and complete overview of the current state of the art in the field of semiconductor nonlinear nanophotonics Costantino De Angelis has been full professor of electromagnetic fields at the University of Brescia since 1998. He is an OSA Fellow and has been responsible for several university research contracts in the last 20 years within Europe, the United States, and Italy. His technical interests are in optical antennas and nanophotonics. He is the author of over 150 peer-reviewed scientific journal articles. Giuseppe Leo has been a full professor in physics at Paris Diderot University since 2004, and in charge of the nonlinear devices group of MPQ Laboratory since 2006. His research areas include nonlinear optics, micro- and nano-photonics, and optoelectronics, with a focus on AlGaAs platform. He has coordinated several research programs and coauthored 100 peer-reviewed journal articles, 200 conference papers, 10 book chapters and also has four patents. Dragomir Neshev is a professor in physics and the leader of the experimental photonics group in the Nonlinear Physics Centre at Australian National University (ANU). His activities span over several branches of optics, including nonlinear periodic structures, singular optics, plasmonics, and photonic metamaterials. He has coauthored 200 publications in international peer-reviewed scientific journals.
Download or read book Labs on Chip written by Eugenio Iannone and published by CRC Press. This book was released on 2018-09-03 with total page 1178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Labs on Chip: Principles, Design and Technology provides a complete reference for the complex field of labs on chip in biotechnology. Merging three main areas— fluid dynamics, monolithic micro- and nanotechnology, and out-of-equilibrium biochemistry—this text integrates coverage of technology issues with strong theoretical explanations of design techniques. Analyzing each subject from basic principles to relevant applications, this book: Describes the biochemical elements required to work on labs on chip Discusses fabrication, microfluidic, and electronic and optical detection techniques Addresses planar technologies, polymer microfabrication, and process scalability to huge volumes Presents a global view of current lab-on-chip research and development Devotes an entire chapter to labs on chip for genetics Summarizing in one source the different technical competencies required, Labs on Chip: Principles, Design and Technology offers valuable guidance for the lab-on-chip design decision-making process, while exploring essential elements of labs on chip useful both to the professional who wants to approach a new field and to the specialist who wants to gain a broader perspective.
Download or read book Fabless written by Daniel Nenni and published by Createspace Independent Publishing Platform. This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to illustrate the magnificence of the fabless semiconductor ecosystem, and to give credit where credit is due. We trace the history of the semiconductor industry from both a technical and business perspective. We argue that the development of the fabless business model was a key enabler of the growth in semiconductors since the mid-1980s. Because business models, as much as the technology, are what keep us thrilled with new gadgets year after year, we focus on the evolution of the electronics business. We also invited key players in the industry to contribute chapters. These "In Their Own Words" chapters allow the heavyweights of the industry to tell their corporate history for themselves, focusing on the industry developments (both in technology and business models) that made them successful, and how they in turn drive the further evolution of the semiconductor industry.
Download or read book Harnessing Light written by National Research Council and published by National Academies Press. This book was released on 1998-09-25 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical science and engineering affect almost every aspect of our lives. Millions of miles of optical fiber carry voice and data signals around the world. Lasers are used in surgery of the retina, kidneys, and heart. New high-efficiency light sources promise dramatic reductions in electricity consumption. Night-vision equipment and satellite surveillance are changing how wars are fought. Industry uses optical methods in everything from the production of computer chips to the construction of tunnels. Harnessing Light surveys this multitude of applications, as well as the status of the optics industry and of research and education in optics, and identifies actions that could enhance the field's contributions to society and facilitate its continued technical development.
Download or read book VLSI written by Tomasz Wojcicki and published by CRC Press. This book was released on 2017-12-19 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently the world celebrated the 60th anniversary of the invention of the first transistor. The first integrated circuit (IC) was built a decade later, with the first microprocessor designed in the early 1970s. Today, ICs are a part of nearly every aspect of our daily lives. They help us live longer and more comfortably, and do more, faster. All this is possible because of the relentless search for new materials, circuit designs, and ideas happening on a daily basis at industrial and academic institutions around the globe. Showcasing the latest advances in very-large-scale integrated (VLSI) circuits, VLSI: Circuits for Emerging Applications provides a balanced view of industrial and academic developments beyond silicon and complementary metal–oxide–semiconductor (CMOS) technology. From quantum-dot cellular automata (QCA) to chips for cochlear implants, this must-have resource: Investigates the trend of combining multiple cores in a single chip to boost performance of the overall system Describes a novel approach to enable physically unclonable functions (PUFs) using intrinsic features of a VLSI chip Examines the VLSI implementations of major symmetric and asymmetric key cryptographic algorithms, hash functions, and digital signatures Discusses nonvolatile memories such as resistive random-access memory (Re-RAM), magneto-resistive RAM (MRAM), and floating-body RAM (FB-RAM) Explores organic transistors, soft errors, photonics, nanoelectromechanical (NEM) relays, reversible computation, bioinformatics, asynchronous logic, and more VLSI: Circuits for Emerging Applications presents cutting-edge research, design architectures, materials, and uses for VLSI circuits, offering valuable insight into the current state of the art of micro- and nanoelectronics.
