Download or read book Optimization based Reliability Control of Mechatronic Systems written by Tobias Meyer and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reliability of High Power Mechatronic Systems 1 written by Abdelkhalak El Hami and published by Elsevier. This book was released on 2017-09-27 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first volume of a set dedicated to the reliability of high-power mechatronic systems focuses specifically on simulation, modeling and optimization in automotive and aerospace applications. In the search to improve industrial competitiveness, the development of methods and tools for the design of products is especially pertinent in the context of cost reduction. This book seeks to propose new methods that simultaneously allow for a quicker design of future mechatronic devices in the automotive and aerospace industries while guaranteeing their increased reliability. The reliability of these critical elements is further validated digitally through new multi-physical and probabilistic models that could ultimately lead to new design standards and reliable forecasting. Presents a methodological guide that demonstrates the reliability of fractured mechatronic components and devices Includes numerical and statistical models to optimize the reliability of the product architecture Helps users develop a methodology to characterize critical elements at the earliest stage
Download or read book Embedded Mechatronic Systems written by Abdelkhalak El Hami and published by ISTE Press - Elsevier. This book was released on 2019-12-15 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics brings together computer science, mechanics and electronics. It enables us to improve the performances of embedded electronic systems by reducing their weight, volume, energy consumption and cost. Mechatronic equipment must operate without failure throughout ever-increasing service lives. The particularly severe conditions of use of embedded mechatronics cause failure mechanisms which are the source of breakdowns. Until now, these failure phenomena have not been looked at with enough depth to be able to be controlled. Embedded Mechatronic Systems 1, Second Edition presents two methodologies: the statistical approach to the design optimization by reliability and the experimental approach for the characterization of the development of mechatronic systems in operating mode. It also analyzes new analysis tools on the effects of thermal, vibratory, humidity, electric and electromagnetic stresses. Presents a statistical approach to the design optimization by reliability It presents an experimental approach for the characterization of the development of mechatronic systems in operating mode The book analyzes new analysis tools on the effects of thermal, vibratory, humidity, electric and electromagnetic stresses
Download or read book Embedded Mechatronic Systems 2 written by Abdelkhalak El Hami and published by Elsevier. This book was released on 2020-02-28 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded Mechatronic Systems 2: Analysis of Failures, Modeling, Simulation and Optimization presents advances in research within the field of mechatronic systems, which integrates reliability into the design process. Providing many detailed examples, this book develops a characterization methodology for faults in mechatronic systems. It analyzes the multi-physical modeling of faults, revealing weaknesses in design and failure mechanisms. This development of meta-models enables us to simulate effects on the reliability of conditions of use and manufacture. Provides many detailed examples Develops a characterization methodology for faults in mechatronic systems Analyzes the multi-physical modeling of faults, revealing weaknesses in design and failure mechanisms
Download or read book Dependability of Self Optimizing Mechatronic Systems written by Jürgen Gausemeier and published by Springer Science & Business Media. This book was released on 2014-01-23 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intelligent technical systems, which combine mechanical, electrical and software engineering with methods from control engineering and advanced mathematics, go far beyond the state of the art in mechatronics and open up fascinating perspectives. Among these systems are so-called self-optimizing systems, which are able to adapt their behavior autonomously and flexibly to changing operating conditions. The Collaborative Research Center 614 "Self-optimizing concepts and structures in mechanical engineering" pursued the long-term aim to enable others to develop dependable self-optimizing systems. Assuring their dependability poses new challenges. However, self-optimization also offers the possibility to adapt the system's behavior to improve dependability during operation. The aim of this book is to provide methods and techniques to master the challenges and to exploit the possibilities given by self-optimization. The reader will be able to develop self-optimizing systems that fulfill and surpass today’s dependability requirements easily. This book is directed to researchers and practitioners alike. It gives a brief introduction to the holistic development approach for self-optimizing mechatronic systems and the steps required to assure a dependable product design starting with the very early conceptual design phase. A guideline to select suitable methods for each step and the methods themselves are included. Each method is individually introduced, many examples and full references are given.
Download or read book Embedded Mechatronic Systems Volume 2 written by Abdelkhalak El Hami and published by Elsevier. This book was released on 2015-07-16 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: In operation, mechatronics embedded systems are stressed by loads of different causes: climate (temperature, humidity), vibration, electrical and electromagnetic. These stresses in components induce failure mechanisms should be identified and modeled for better control. AUDACE is a collaborative project of the cluster Mov'eo that address issues specific to mechatronic reliability embedded systems. AUDACE means analyzing the causes of failure of components of mechatronic systems onboard. The goal of the project is to optimize the design of mechatronic devices by reliability. The project brings together public sector laboratories that have expertise in analysis and modeling of failure, major groups of mechatronics (Valeo and Thales) in the automotive and aerospace and small and medium enterprises that have skills in characterization and validation tests. Find and develop ways to characterize and validate the design robustness and reliability of complex mechatronic devices Develop ways to characterize physical and chemical phenomena, Identify mechanisms of failure of components of these devices, Analyze the physical and / or chemical mechanisms of failure, in order of importance To model failure mechanisms and design optimization.
Download or read book Reliability of High Power Mechatronic Systems 2 written by Abdelkhalak El Hami and published by Elsevier. This book was released on 2017-10-17 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second volume of a series dedicated to the reliability of high-power mechatronic systems focuses specifically on issues, testing and analysis in automotive and aerospace applications. In the search to improve industrial competitiveness, the development of methods and tools for the design of products is especially pertinent in the context of cost reduction. This book proposes new methods that simultaneously allow for a quicker design of future mechatronic devices in the automotive and aerospace industries while guaranteeing their increased reliability. The reliability of these critical elements is further validated digitally through new multi-physical and probabilistic models that could ultimately lead to new design standards and reliable forecasting. Presents a methodological guide that demonstrates the reliability of fractured mechatronic components and devices Includes numerical and statistical models to optimize the reliability of the product architecture Develops a methodology to characterize critical elements at the earliest stage in their development
Download or read book Modeling Simulation and Optimization written by Abdelkhalak El Hami and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: In operation, mechatronics embedded systems are stressed by loads of different causes: climate (temperature, humidity), vibration, electrical and electromagnetic. These stresses in components induce failure mechanisms should be identified and modeled for better control. AUDACE is a collaborative project of the cluster Mov'eo that address issues specific to mechatronic reliability embedded systems. AUDACE means analyzing the causes of failure of components of mechatronic systems onboard. The goal of the project is to optimize the design of mechatronic devices by reliability.
Download or read book Diagnostics of Mechatronic Systems written by Pavol Božek and published by Springer Nature. This book was released on 2021-03-03 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides novel approach to the diagnosis of complex technical systems that are widely used in various kinds of transportation, energy, metallurgy, metalworking, fuels, mining, chemical, paper industries, etc. Effective diagnostic systems are necessary for the early detection of errors in mechatronic systems, for the organization of maintenance and for the assessment of the performed service quality. Unfortunately, the practical use of AI in the diagnosis of mechatronic systems is still quite limited and the inability to build effective mechatronic systems leads to significant economic losses and dangers. The main aim of this book is to contribute to knowledge within the topic of diagnostics of mechatronic systems by the analysis of the elements reliability characteristics, using methods, models and algorithms for diagnostics and by studying examples of model diagnostic systems using AI methods based on neural networks, fuzzy inference systems and genetic algorithms.
Download or read book Intelligent Optimal Adaptive Control for Mechatronic Systems written by Marcin Szuster and published by Springer. This book was released on 2017-12-28 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book deals with intelligent control of mobile robots, presenting the state-of-the-art in the field, and introducing new control algorithms developed and tested by the authors. It also discusses the use of artificial intelligent methods like neural networks and neuraldynamic programming, including globalised dual-heuristic dynamic programming, for controlling wheeled robots and robotic manipulators,and compares them to classical control methods.
Download or read book Dynamics Of Mechatronics Systems Modeling Simulation Control Optimization And Experimental Investigations written by Jan Awrejcewicz and published by World Scientific. This book was released on 2016-08-10 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the interplay of mechanics, electronics, electrotechnics, automation and biomechanics. It provides a broad overview of mechatronics systems ranging from modeling and dimensional analysis, and an overview of magnetic, electromagnetic and piezo-electric phenomena. It also includes the investigation of the pneumo-fluid-mechanical, as well as electrohydraulic servo systems, modeling of dynamics of an atom/particle embedded in the magnetic field, integrity aspects of the Maxwell's equations, the selected optimization problems of angular velocity control of a DC motor subjected to chaotic disturbances with and without stick-slip dynamics, and the analysis of a human chest adjacent to the elastic backrest aimed at controlling force to minimize relative compression of the chest employing the LQR.This book provides a theoretical background on the analysis of various kinds of mechatronics systems, along with their computational analysis, control, optimization as well as laboratory investigations.
Download or read book Control of Mechatronic Systems written by Patrick O. J. Kaltjob and published by John Wiley & Sons. This book was released on 2021-04-12 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical methodology for designing integrated automation control for systems and processes Implementing digital control within mechanical-electronic (mechatronic) systems is essential to respond to the growing demand for high-efficiency machines and processes. In practice, the most efficient digital control often integrates time-driven and event-driven characteristics within a single control scheme. However, most of the current engineering literature on the design of digital control systems presents discrete-time systems and discrete-event systems separately. Control Of Mechatronic Systems: Model-Driven Design And Implementation Guidelines unites the two systems, revisiting the concept of automated control by presenting a unique practical methodology for whole-system integration. With its innovative hybrid approach to the modeling, analysis, and design of control systems, this text provides material for mechatronic engineering and process automation courses, as well as for self-study across engineering disciplines. Real-life design problems and automation case studies help readers transfer theory to practice, whether they are building single machines or large-scale industrial systems. Presents a novel approach to the integration of discrete-time and discrete-event systems within mechatronic systems and industrial processes Offers user-friendly self-study units, with worked examples and numerous real-world exercises in each chapter Covers a range of engineering disciplines and applies to small- and large-scale systems, for broad appeal in research and practice Provides a firm theoretical foundation allowing readers to comprehend the underlying technologies of mechatronic systems and processes Control Of Mechatronic Systems is an important text for advanced students and professionals of all levels engaged in a broad range of engineering disciplines.
Download or read book Emerging Trends in Mechatronics written by Aydin Azizi and published by BoD – Books on Demand. This book was released on 2020-01-15 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics is a multidisciplinary branch of engineering combining mechanical, electrical and electronics, control and automation, and computer engineering fields. The main research task of mechatronics is design, control, and optimization of advanced devices, products, and hybrid systems utilizing the concepts found in all these fields. The purpose of this special issue is to help better understand how mechatronics will impact on the practice and research of developing advanced techniques to model, control, and optimize complex systems. The special issue presents recent advances in mechatronics and related technologies. The selected topics give an overview of the state of the art and present new research results and prospects for the future development of the interdisciplinary field of mechatronic systems.
Download or read book Mechatronic Systems written by Clarence W. de Silva and published by CRC Press. This book was released on 2007-10-17 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics has emerged as its own discipline over the past decade, yet no reference has lived up to the demands of being a working guide for designing and implementing the new generation of mechatronic systems. Uniting an international team of leading experts, Mechatronic Systems: Devices, Design, Control, Operation and Monitoring rises to the ch
Download or read book Optimization of Systems Reliability written by Frank A. Tillman and published by . This book was released on 1980 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The methods used to optimize systems reliability problems are comprehensively presented and discussed in this book, the fiurst attempt to gather together a concise and comprehensible overview of this important body of techniques and problems. Both reliability engineers and the community of researchers and students involved in operations research will find this to be the most complete account of the subect to date.
Download or read book Mechatronic Systems Theory and Applications written by Mohamed Slim Abbes and published by Springer. This book was released on 2014-06-04 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book offers a snapshot of the state-of-art in the field of model-based mechatronic system design. It covers topics including machine design and optimization, predictive systems in manufacturing networks, and the development of software for modeling and simulation of processes, which are supplemented by practical case studies. The book is a collection of fifteen selected contributions presented during the Workshop on Mechatronic Systems, held on March 17-19, 2014, in Mahdia, Tunisia. The workshop was jointly organized by the Laboratory of Mechanics Modeling and Production (LA2MP) of the National School of Engineers Sfax, Tunisia, and the Laboratory for Mechanical Systems and Materials Engineering (LISMMA) of Higher Institute of Mechanics (SUPMECA), Paris, France.
Download or read book Design Methodology for Intelligent Technical Systems written by Jürgen Gausemeier and published by Springer Science & Business Media. This book was released on 2014-01-28 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intelligent technical systems, which combine mechanical, electrical and software engineering with control engineering and advanced mathematics, go far beyond the state of the art in mechatronics and open up fascinating perspectives. Among these systems are so-called self-optimizing systems, which are able to adapt their behavior autonomously and flexibly to changing operating conditions. Self-optimizing systems create high value for example in terms of energy and resource efficiency as well as reliability. The Collaborative Research Center 614 "Self-optimizing Concepts and Structures in Mechanical Engineering" pursued the long-term aim to open up the active paradigm of self-optimization for mechanical engineering and to enable others to develop self-optimizing systems. This book is directed to researchers and practitioners alike. It provides a design methodology for the development of self-optimizing systems consisting of a reference process, methods, and tools. The reference process is divided into two phases the domain-spanning conceptual design and the domain-specific design and development. For the conceptual design a holistic approach is provided. Domain-specific methods and tools developed especially for the design and development of self-optimizing systems are described and illustrated by application examples. This book will enable the reader to identify the potential for self-optimization and to develop self-optimizing systems independently.
