Download or read book Optimization of Manufacturing Processes written by Kapil Gupta and published by Springer. This book was released on 2019-06-25 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a detailed understanding of optimization methods as they are implemented in a variety of manufacturing, fabrication and machining processes. It covers the implementation of statistical methods, multi-criteria decision making methods and evolutionary techniques for single and multi-objective optimization to improve quality, productivity, and sustainability in manufacturing. It reports on the theoretical aspects, special features, recent research and latest development in the field. Optimization of Manufacturing Processes is a valuable source of information for researchers and practitioners, as it fills the gap where no dedicated book is available on intelligent manufacturing/modeling and optimization in manufacturing. Readers will develop an understanding of the implementation of statistical and evolutionary techniques for modeling and optimization in manufacturing.

Download or read book Data Driven Optimization of Manufacturing Processes written by Kalita, Kanak and published by IGI Global. This book was released on 2020-12-25 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: All machining process are dependent on a number of inherent process parameters. It is of the utmost importance to find suitable combinations to all the process parameters so that the desired output response is optimized. While doing so may be nearly impossible or too expensive by carrying out experiments at all possible combinations, it may be done quickly and efficiently by using computational intelligence techniques. Due to the versatile nature of computational intelligence techniques, they can be used at different phases of the machining process design and optimization process. While powerful machine-learning methods like gene expression programming (GEP), artificial neural network (ANN), support vector regression (SVM), and more can be used at an early phase of the design and optimization process to act as predictive models for the actual experiments, other metaheuristics-based methods like cuckoo search, ant colony optimization, particle swarm optimization, and others can be used to optimize these predictive models to find the optimal process parameter combination. These machining and optimization processes are the future of manufacturing. Data-Driven Optimization of Manufacturing Processes contains the latest research on the application of state-of-the-art computational intelligence techniques from both predictive modeling and optimization viewpoint in both soft computing approaches and machining processes. The chapters provide solutions applicable to machining or manufacturing process problems and for optimizing the problems involved in other areas of mechanical, civil, and electrical engineering, making it a valuable reference tool. This book is addressed to engineers, scientists, practitioners, stakeholders, researchers, academicians, and students interested in the potential of recently developed powerful computational intelligence techniques towards improving the performance of machining processes.

Download or read book Advanced Modeling and Optimization of Manufacturing Processes written by R. Venkata Rao and published by Springer Science & Business Media. This book was released on 2010-12-01 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Modeling and Optimization of Manufacturing Processes presents a comprehensive review of the latest international research and development trends in the modeling and optimization of manufacturing processes, with a focus on machining. It uses examples of various manufacturing processes to demonstrate advanced modeling and optimization techniques. Both basic and advanced concepts are presented for various manufacturing processes, mathematical models, traditional and non-traditional optimization techniques, and real case studies. The results of the application of the proposed methods are also covered and the book highlights the most useful modeling and optimization strategies for achieving best process performance. In addition to covering the advanced modeling, optimization and environmental aspects of machining processes, Advanced Modeling and Optimization of Manufacturing Processes also covers the latest technological advances, including rapid prototyping and tooling, micromachining, and nano-finishing. Advanced Modeling and Optimization of Manufacturing Processes is written for designers and manufacturing engineers who are responsible for the technical aspects of product realization, as it presents new models and optimization techniques to make their work easier, more efficient, and more effective. It is also a useful text for practitioners, researchers, and advanced students in mechanical, industrial, and manufacturing engineering.

Download or read book Manufacturing Process Design and Optimization written by Rhyder and published by CRC Press. This book was released on 1997-04-15 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents the concepts of process design, problem identification, problem-solving and process optimization. It provides the basic tools needed to increase the consistency and profitability of manufacturing options, stressing the paradigms of improvement and emphasizing the hands-on use of tools furnished. The book introduces basic experimental design principles and avoids complicated statistical formulae.

Download or read book Nature Inspired Optimization in Advanced Manufacturing Processes and Systems written by Ganesh M. Kakandikar and published by CRC Press. This book was released on 2020-12-08 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manufacturing system is going through substantial changes and developments in light of Industry 4.0. Newer manufacturing technologies are being developed and applied. There is a need to optimize these techniques when applied in different circumstances with respect to materials, tools, product configurations, and process parameters. This book covers computational intelligence applied to manufacturing. It discusses nature-inspired optimization of processes and their design and development in manufacturing systems. It explores all manufacturing processes, at both macro and micro levels, and offers manufacturing philosophies. Nonconventional manufacturing, real industry problems and case studies, research on generative processes, and relevance of all this to Industry 4.0 is also included. Researchers, students, academicians, and industry professionals will find this reference title very useful.

Download or read book Computational Methods for Optimizing Manufacturing Technology Models and Techniques written by Davim, J. Paulo and published by IGI Global. This book was released on 2012-02-29 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book contains the latest research developments in manufacturing technology and its optimization, and demonstrates the fundamentals of new computational approaches and the range of their potential application"--Provided by publisher.

Download or read book Modeling and Optimization of Advanced Manufacturing Processes written by Sumit Bhowmik and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers various multiple-criteria decision making (mcdm) methods for modeling and optimization of advanced manufacturing processes (AMPs). Processes such as non-conventional machining, rapid prototyping, environmentally conscious machining and hybrid machining are finally put together in a single book. It highlights the research advances and discusses the published literature of the last 15 years in the field. Case studies of real life manufacturing situations are also discussed.

Download or read book Cost Reduction and Optimization for Manufacturing and Industrial Companies written by Joseph Berk and published by John Wiley & Sons. This book was released on 2010-02-22 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focuses on rapid implementation of practical, real-world cost reduction solutions In today's economic climate, the need to cut costs can be the difference between success and failure. Cost Reduction and Optimization for Manufacturing and Industrial Companies covers all major cost reduction areas, providing easy to read examples and advice on steps to take. It provides the roadmap for implementing recommended actions with true and tried methods by taking a modern, all-inclusive look at manufacturing processes. Based on the author's cost reduction experience gained during 30 years of senior operations and consulting engagements with hundreds of organizations, this book includes easy-to-understand and easy-to-implement cost reduction concepts organized into five general areas --labor, material, design, process, and overhead. Each chapter: Dives into a cost reduction area and starts with the bottom line first by summarizing key points Provides proven tactics for cutting costs without a lot of extraneous data Follows a qualitative and design-oriented approach Emphasizes quick implementation and measurable cost reduction Identifies who in the organization should do the work Outlines risks and suggested risk mitigation actions Contains numerous tables, graphs, and photos to show the concepts described in the book Praise for Cost Reduction and Optimization for Manufacturing and Industrial Companies "In this introductory book, Berk not only takes a modern, all-inclusive look at manufacturing processes but also provides substantial coverage of engineering materials and production systems. It follows a more qualitative and design-oriented approach than other texts in the market, helping readers gain a better understanding of important concepts. They'll also discover how micro-economic conditions relate to the process variables in a given process as well as how to perform manufacturing science and quantitative engineering analysis of manufacturing processes." —Fred Silverman, Director Engineering of Hi-Shear Technology Corporation "Joe Berk has created a unique, practical and straightforward approach to cost reduction in manufacturing. This work provides valuable insights and concrete techniques, based on real-world experiences, to any manufacturing organization undertaking change to position itself to compete successfully in the global marketplace." —Joe Carleone, President and COO of American Pacific Corporation Check out author Joseph Berk's blog at http://manufacturingtraining.wordpress.com/

Download or read book System Design Optimization for Product Manufacturing written by Masataka Yoshimura and published by Springer Science & Business Media. This book was released on 2010-02-28 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Readers of System Design Optimization for Product Manufacturing will learn about detailed concepts and practical technologies that enable successful product design and manufacture. These concepts and technologies are based on system optimization methodologies that consider a broad range of mechanical, as well as human, factors. System Design Optimization for Product Manufacturing explains the methodologies behind current and future product manufacture. Its detailed explanations of key concepts are relevant not only for product design and manufacture, but also for other business fields. These core concepts and methodologies can be applied to practically any field where informed decision-making is important, and where a range of often conflicting factors must be carefully weighed and considered. System Design Optimization for Product Manufacturing can be used as a fundamental reference book by both engineers and students in the fields of manufacturing, design engineering, and product development.

Download or read book Design and Optimization of Production Lines written by Paolo Renna and published by MDPI. This book was released on 2021-01-27 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is dedicated to the latest findings on the design and optimization of production lines. The “Fourth Industrial Revolution” (alternatively known as “Industry 4.0”) supports innovative models for energy consumption and fault tolerance in automated lines, and this drives changes in the design and optimization models of production lines. The goal is to collect a series of works that can summarize the latest trends in the field of production line optimization models in order to improve the responsiveness of automated lines to failures, reduce energy consumption and peak electricity demand, and develop other methods to support robust and sustainable production lines.

Download or read book Optimization of Manufacturing Systems Using the Internet of Things written by Yingfeng Zhang and published by Academic Press. This book was released on 2016-10-21 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimization of Manufacturing Systems Using the Internet of Things extends the IoT (Internet of Things) into the manufacturing field to develop an IoMT (Internet of Manufacturing Things) architecture with real-time traceability, visibility, and interoperability in production planning, execution, and control. This book is essential reading for anyone interested in the optimization and control of an intelligent manufacturing system. As modern manufacturing shop-floors can create bottlenecks in the capturing and collection of real-time field information, and because paper-based manual systems are time-consuming and prone to errors, this book helps readers understand how to alleviate these issues, assisting them in their decision-making on shop-floors. Includes case studies in implementing IoTs for data acquisition, monitoring, and assembly in manufacturing. Helps manufacturers to tackle the growing complexities and uncertainties of manufacturing systems in globalized business environments Acts as an introduction to using IoT for readers across industrial and manufacturing engineering

Download or read book Mechanical Design Optimization Using Advanced Optimization Techniques written by R. Venkata Rao and published by Springer Science & Business Media. This book was released on 2012-01-14 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical design includes an optimization process in which designers always consider objectives such as strength, deflection, weight, wear, corrosion, etc. depending on the requirements. However, design optimization for a complete mechanical assembly leads to a complicated objective function with a large number of design variables. It is a good practice to apply optimization techniques for individual components or intermediate assemblies than a complete assembly. Analytical or numerical methods for calculating the extreme values of a function may perform well in many practical cases, but may fail in more complex design situations. In real design problems, the number of design parameters can be very large and their influence on the value to be optimized (the goal function) can be very complicated, having nonlinear character. In these complex cases, advanced optimization algorithms offer solutions to the problems, because they find a solution near to the global optimum within reasonable time and computational costs. Mechanical Design Optimization Using Advanced Optimization Techniques presents a comprehensive review on latest research and development trends for design optimization of mechanical elements and devices. Using examples of various mechanical elements and devices, the possibilities for design optimization with advanced optimization techniques are demonstrated. Basic and advanced concepts of traditional and advanced optimization techniques are presented, along with real case studies, results of applications of the proposed techniques, and the best optimization strategies to achieve best performance are highlighted. Furthermore, a novel advanced optimization method named teaching-learning-based optimization (TLBO) is presented in this book and this method shows better performance with less computational effort for the large scale problems. Mechanical Design Optimization Using Advanced Optimization Techniques is intended for designers, practitioners, managers, institutes involved in design related projects, applied research workers, academics, and graduate students in mechanical and industrial engineering and will be useful to the industrial product designers for realizing a product as it presents new models and optimization techniques to make tasks easier, logical, efficient and effective. .

Download or read book Process Optimization written by Enrique del Castillo and published by Springer Science & Business Media. This book was released on 2007-09-14 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers several bases at once. It is useful as a textbook for a second course in experimental optimization techniques for industrial production processes. In addition, it is a superb reference volume for use by professors and graduate students in Industrial Engineering and Statistics departments. It will also be of huge interest to applied statisticians, process engineers, and quality engineers working in the electronics and biotech manufacturing industries. In all, it provides an in-depth presentation of the statistical issues that arise in optimization problems, including confidence regions on the optimal settings of a process, stopping rules in experimental optimization, and more.

Download or read book Advanced Optimization and Decision Making Techniques in Textile Manufacturing written by Anindya Ghosh and published by CRC Press. This book was released on 2019-03-18 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimization and decision making are integral parts of any manufacturing process and management system. The objective of this book is to demonstrate the confluence of theory and applications of various types of multi-criteria decision making and optimization techniques with reference to textile manufacturing and management. Divided into twelve chapters, it discusses various multi-criteria decision-making methods such as AHP, TOPSIS, ELECTRE, and optimization techniques like linear programming, fuzzy linear programming, quadratic programming, in textile domain. Multi-objective optimization problems have been dealt with two approaches, namely desirability function and evolutionary algorithm. Key Features Exclusive title covering textiles and soft computing fields including optimization and decision making Discusses concepts of traditional and non-traditional optimization methods with textile examples Explores pertinent single-objective and multi-objective optimizations Provides MATLAB coding in the Appendix to solve various types of multi-criteria decision making and optimization problems Includes examples and case studies related to textile engineering and management

Download or read book Optimization and Variation Reduction in Quality written by Wayne A. Taylor and published by . This book was released on 2005 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Production Technology written by Christian Brecher and published by Springer. This book was released on 2014-11-18 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume contains the selected papers presented at the scientific board meeting of the German Cluster of Excellence on “Integrative Production Technology for High-Wage Countries”, held in November 2014. The topical structure of the book is clustered in six sessions: Integrative Production Technology, Individualised Production, Virtual Production Systems, Integrated Technologies, Self-Optimising Production Systems and Human Factors in Production Technology. The Aachen perspective on a holistic theory of production is complemented by conference papers from external leading researchers in the fields of production, materials science and bordering disciplines. The target audience primarily comprises research experts and practitioners in the field but the book may also be beneficial for graduate students.

Download or read book Sustainable Machining written by J. Paulo Davim and published by Springer. This book was released on 2017-03-19 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview on current sustainable machining. Its chapters cover the concept in economic, social and environmental dimensions. It provides the reader with proper ways to handle several pollutants produced during the machining process. The book is useful on both undergraduate and postgraduate levels and it is of interest to all those working with manufacturing and machining technology.