Download or read book Optimisation of Cushion Materials for Rockfall Protection Galleries written by Ravikiran Chikatamarla and published by vdf Hochschulverlag AG. This book was released on 2007 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sustainable Construction Materials and Technologies written by Yoon-Moon Chun and published by CRC Press. This book was released on 2007-05-31 with total page 1756 pages. Available in PDF, EPUB and Kindle. Book excerpt: The construction materials industry is a major user of the world’s resources. While enormous progress has been made towards sustainability, the scope and opportunities for improvements are significant. To further the effort for sustainable development, a conference on Sustainable Construction Materials and Technologies was held at Coventry University, Coventry, U.K., from June 11th - 13th, 2007, to highlight case studies and research on new and innovative ways of achieving sustainability of construction materials and technologies. This book presents selected, important contributions made at the conference. Over 190 papers from over 45 countries were accepted for presentation at the conference, of which approximately 100 selected papers are published in this book. The rest of the papers are published in two supplementary books. Topics covered in this book include: sustainable alternatives to natural sand, stone, and Portland cement in concrete; sustainable use of recyclable resources such as fly ash, ground municipal waste slag, pozzolan, rice-husk ash, silica fume, gypsum plasterboard (drywall), and lime in construction; sustainable mortar, concrete, bricks, blocks, and backfill; the economics and environmental impact of sustainable materials and structures; use of construction and demolition wastes, and organic materials (straw bale, hemp, etc.) in construction; sustainable use of soil, timber, and wood products; and related sustainable construction and rehabilitation technologies.

Download or read book Landslides and Engineered Slopes Experience Theory and Practice written by Stefano Aversa and published by CRC Press. This book was released on 2018-04-17 with total page 3375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Landslides and Engineered Slopes. Experience, Theory and Practice contains the invited lectures and all papers presented at the 12th International Symposium on Landslides, (Naples, Italy, 12-19 June 2016). The book aims to emphasize the relationship between landslides and other natural hazards. Hence, three of the main sessions focus on Volcanic-induced landslides, Earthquake-induced landslides and Weather-induced landslides respectively, while the fourth main session deals with Human-induced landslides. Some papers presented in a special session devoted to "Subareal and submarine landslide processes and hazard” and in a “Young Session” complete the books. Landslides and Engineered Slopes. Experience, Theory and Practice underlines the importance of the classic approach of modern science, which moves from experience to theory, as the basic instrument to study landslides. Experience is the key to understand the natural phenomena focusing on all the factors that play a major role. Theory is the instrument to manage the data provided by experience following a mathematical approach; this allows not only to clarify the nature and the deep causes of phenomena but mostly, to predict future and, if required, manage similar events. Practical benefits from the results of theory to protect people and man-made works. Landslides and Engineered Slopes. Experience, Theory and Practice is useful to scientists and practitioners working in the areas of rock and soil mechanics, geotechnical engineering, engineering geology and geology.

Download or read book Centrifuge modelling of ground improvement for double porosity clay written by Emma Jane Pooley and published by vdf Hochschulverlag AG. This book was released on 2015-11-10 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Double porosity soil is characterised by a soil continuum containing two distinct porosities. Typically, this consists of macro-grains (lumps) of soil that have an internal porosity defined as the intragranular porosity. The spaces between lumps are identified as intergranular voids that give rise to the intergranular porosity. Human activities such as land reclamation or mining can give rise to large areas of land with subsoil that exhibits double porosity. The need to build in, or on, these areas is increasing, due to demand for land for industrial usage, infrastructure, and residence. However, the engineering properties of such soils are challenging, and often difficult to predict due to their inhomogeneity and a lack of information about the initial or current parameters. Double porosity mining waste landfills in Northern Bohemia in the Czech Republic were studied in this project. There, decades of open-cast mining of brown coal have left vast areas of land affected by the waste overburden that has been removed and dumped in old mining pits. Redevelopment of areas affected by mining sometimes requires construction on old overburden waste spoil heaps, which consist primarily of lumps of overconsolidated clay and are therefore characterised by a double porosity soil structure. The loading response on these clayfills entails large absolute and relative deformations, which means that ground improvement is normally needed before construction begins, to ensure that both stability and service limit state requirements are met. The primary aim of this research was a comparison, through physical modelling, of ground improvement techniques on double porosity clay landfills. A secondary objective was to contribute to the understanding of the material behaviour governing response to loading and other processes on double porosity soil.

Download or read book Shear Band Propagation in Soils and Dynamics of Tsunamigenic Landslides written by Erich Saurer and published by vdf Hochschulverlag AG. This book was released on 2010 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book On the variability of squeezing behaviour in tunnelling written by Florence Mezger and published by vdf Hochschulverlag AG. This book was released on 2020-07-01 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: On the variability of squeezing behaviour in tunnelling

Download or read book Spatial Effects in Tunnelling Through Squeezing Ground written by Linard Cantieni and published by vdf Hochschulverlag AG. This book was released on 2011 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Experimental investigations for the modelling of anhydritic swelling claystones written by Tara Wanninger (-Huber) and published by vdf Hochschulverlag AG. This book was released on 2020-07-01 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental investigations for the modelling of anhydritic swelling claystones

Download or read book Failure mechanisms in unsaturated silty sand slopes triggered by rainfall written by Amin Askarinejad and published by vdf Hochschulverlag AG. This book was released on 2015-11-26 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Landslides triggered by rainfall cause significant damage to infrastructure annually and affect many lives in several parts of the world, including Switzerland. These landslides are initiated by a decrease in the effective stresses, and hence the shear strength of the soil, as a result of the increase in pore water pressure. The frequency of their occurrence is directly affected by the climatic and hydrological conditions in the region. Therefore, it is expected that the predicted rise in the number of extreme meteorological events, accompanied by the concentration of population and infrastructure in mountainous regions, will result in an increased number of casualties associated with landslides in the future. The main goal of this doctoral project was to study the effects of pore water pressure perturbations on the stability of unsaturated silty sand slopes and to investigate the mechanisms leading to the initiation and propagation of the shear deformations and eventually possible rapid mass movements. The behaviour of the test slope prior to the failure induced by the artificial rainfall event was investigated using analytical and numerical methods. The mechanical features of unsaturated soils and reinforcing effects of the vegetation were implemented in 2D and 3D limit equilibrium analysis. The possible depth of the failure surface was calculated based on these simplified models and was compared with the depth of the real failure surface in the landslide triggering experiment. The soil-bedrock interactions, in terms of the pattern of pore pressure distributions and their influence on stabilising or destabilising the slope, were studied and the results were compared to the field measurements.

Download or read book On the role of constitutive behaviour in the response of squeezing ground to tunnelling written by Weijie Dong and published by vdf Hochschulverlag AG. This book was released on 2017-08-14 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Squeezing conditions in tunnelling are characterized by the occurrence of large deformations of the opening or high rock pressure that may overstress the lining. Squeezing is associated with poor quality rock. Tunnelling in squeezing ground involves great uncertainties. It is therefore very important to gain a better understanding of the underlying mechanisms. Triaxial testing is the main source of information in order to understand the mechanical features of squeezing ground. Despite the complexity of the squeezing mechanism and the behaviour observed under relatively simple loading conditions, most of previous research work and engineering design practice considers the ground as a linearly elastic, perfectly plastic material obeying the Mohr-Coulomb yield criterion. While the MC model is capable of predicting the final strength and post-failure volumetric behaviour of the squeezing rock, it cannot map some potentially important pre-failure features or the occasionally observed contractant plastic deformation. In addition, the MC model usually leads to an overestimation of the strength under undrained conditions, which is unsafe for tunnel design. The present thesis mainly addresses the influence of constitutive modelling on predictions about the response of squeezing ground to tunnelling in order to provide some general guidelines for basic engineering analysis. This objective is achieved by investigating the behaviour of squeezing rocks theoretically and experimentally, using samples from several tunnel projects, including the Gotthard base tunnel and the planned Gibraltar strait tunnel.

Download or read book River dyke failure modeling under transient water conditions written by Wilmer Ferney Morales Peñuela and published by vdf Hochschulverlag AG. This book was released on 2015-11-26 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Knowledge of the performance of river dykes during flooding is necessary when designing governmental assistance plans aimed to reduce both casualties and material damage. This is especially relevant when floods have increased in their frequency during the last decades, together with the resulting material damage and life costs. Most of previous attempts for analyzing dyke breaching during flooding have neglected to consider the soil mechanics component and the influence of infiltration and saturation changes on the failure mechanisms developed in the river dyke. This research project aimed to fill that gap in knowledge by analyzing, in a comprehensive manner, the effect of transient water conditions, represented by successive flood cycles, on the seepage conditions and subsequent breaching of dykes. Therefore, three key sub-projects were carried out: • the analysis of the results from an overflow field test, • the physical modeling of small-scaled models under an enhanced gravity field, • the numerical modeling of the flow response and the resulting stability of both the air- and water-side slopes. The results from the numerical simulations matched accurately with the results obtained with the centrifuge modeling, including the prediction of local instabilities during the flood cycles for those dykes that did not include a toe filter.

Download or read book Inverse Analysis in Road Geotechnics written by Carlo Rabaiotti and published by vdf Hochschulverlag AG. This book was released on 2011 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: This research work had the aim of developing a procedure for back-calculating accurate and precise parameter values, describing the mechanical behaviour of the materials built in an existing road structure. After reviewing the existing testing techniques, a new device was designed and assembled at the IGT, Institute for Geotechnical Engineering (ETH Zürich) for measuring the three dimensional deflection bowl under a standard axle load (SAL). Particular attention was paid for obtaining precise and accurate significant measurements for inverse analysis. Three field tests on different locations and road structures were carried out: a flexible pavement type built in a concrete pit (indoor facility) at the EPFL (Ecole Polytechnique Federale de Lausanne), a semirigid type in Hinwil (Switzerland) and a flexible type in Bellinzona (Hinwil). The tests results show that the measured road displacements under a SAL, for relatively low temperatures, are generally reversible and time independent. Laboratory tests (uniaxial compression) were carried out on cores obtained from field samples.The strain measurements of the loaded samples were carried out with strain gages, and validated against devices with different technology (LVDT). The analysis of the test results showed that the materials have different bulk and deviatoric stress-strain behaviour. A new thermodynamical framework for non linear viscoelasticity (hyperviscoelasticity) was developed. Experimentally validated hyperviscoelastic and hyperelastic constitutive laws were adopted respectively for describing the mechanical behaviour of asphalt and cement stabilized mixtures. The inverse analysis of the field tests results was carried out with two different optimization algorithms (Levenberg Marquardt and Mesh Adaptative Direct Search), the FE program ABAQUS, and the developed user defined models. The results demonstrate the accuracy and precision of the parameter values obtained with the proposed inverse analysis procedure, demonstrating a potential for application of the developed technique for non destructing testing of real road structures.

Download or read book Static effects and aspects of feasibility and design of drainages in tunnelling written by Sara Zingg and published by vdf Hochschulverlag AG. This book was released on 2017-02-21 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This PhD thesis investigates the effectiveness of drainage measures with respect to two particularly important problems associated with tunnelling through water-bearing, weak ground: the stability of the tunnel face and the stability and deformation of grouting bodies. Water is an adverse factor with respect to the stability and deformation of underground structures due to the pore water pressure and the seepage forces associated with seepage flow towards the tunnel. Drainage boreholes reduce the pore water pressure and the seepage forces in the vicinity of the cavity. Furthermore, loss of pore water pressure increases the effective stresses and thus the shearing resistance of the ground („consolidation“), which is favourable in terms the deformation occurring during and after tunnelling. The goal of the PhD thesis is to elaborate a more detailed understanding of the interrelationships between drainage measures and the stability of the tunnel face and grouting bodies. The main objectives of the investigations relating to the tunnel face are: 1. analysis of face stability through limit equilibrium computations taking account of the numerically determined seepage flow conditions prevailing in the ground after the implementation of drainage measures; 2. systematic investigation of tunnel face stability considering several different drainage layouts and working out designnomograms; 3. consideration of a series of aspects limiting pore pressure relief and thus the effectiveness of drainage measures and their impact on face stability. The main objectives of the investigations with regard to grouting bodies are: 1. a study of the stabilizing effect of the virtual case of ideal drainage on tunnel support and plastification in grouted fault zones in plane strain conditions; 2. a comparison with the stabilizing effect of real drainage layouts, i.e. when considering pore pressure relief due to specific drainage borehole arrangements; 3. application of the drainage measure both before and after the injection works. In summary, the contribution of this PhD thesis is the detailed investigation of the static effects of drainage measures during tunnelling in water-bearing ground with respect to the stability of the tunnel face and the grouting body as well as the supply of design aids capable of providing a quick assessment of face stability when considering a number of advance drainage schemes.

Download or read book Mountain Risks From Prediction to Management and Governance written by Theo Van Asch and published by Springer Science & Business Media. This book was released on 2013-09-30 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a cross disciplinary treatment of the rapidly growing field of integrated approaches in risk assessment in mountainous areas. All major aspects related to hazard and risk assessment, risk management, and governance are illustrated with a wide range of case studies. The first part of the book focuses on new techniques for assessing the natural hazards of different types of mass movements. State-of-the-art techniques for morphological characterization and monitoring of displacements are described. Computational advances are covered to explain the process systems and to quantify the hazards of fast and slow-moving landslides. In the second part of the book methodologies are included for assessing the impact of these natural hazards on the society in terms of risks. In this part, methodologies for defining the vulnerability of the elements at risk are shown and the use of run-out models for risk assessment of the dangerous rapid mass movements are evaluated. The third part of the book focuses on the response of society towards the problems of hazard and risk. It highlights the role of spatial planning, early warning systems and evacuation plans for risk management. It establishes practical thresholds for acceptable and tolerable risks and emphasizes the importance of education and communication to society. Audience The book is of interest to a wide range of experts from related disciplines, practitioners and stakeholders to demonstrate the importance of an integrated approach for all aspects of risks in mountainous areas.

Download or read book Rock Fall Engineering written by Duncan C. Wyllie and published by CRC Press. This book was released on 2014-09-24 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock falls can be a public safety issue. This book provides comprehensive information on identification of these hazards, and design and construction of protection methods.Rock Fall Engineering describes first, the theoretical background to rock fall behavior in terms of the impact and trajectory phases of rock falls, and second, how this informati

Download or read book Rockfall Engineering written by Stéphane Lambert and published by John Wiley & Sons. This book was released on 2013-02-07 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rockfall Engineering is an up-to-date, international picture of the state of the art in rockfall engineering. The three basic stages of rockfalls are considered: the triggering stage, the motion stage, and the interaction with a structure stage; along with contributions including structural characterization of cliffs, remote monitoring, stability analysis, boulder propagation, design of protection structures an risk assessment. Academic contributions are illustrated by practical examples, and completed by engineering contributions where practical purposes are thoroughly considered. This title is intended for engineers, students as well as researchers.

Download or read book Characterization Modeling Monitoring and Remediation of Fractured Rock written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2021-01-29 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fractured rock is the host or foundation for innumerable engineered structures related to energy, water, waste, and transportation. Characterizing, modeling, and monitoring fractured rock sites is critical to the functioning of those infrastructure, as well as to optimizing resource recovery and contaminant management. Characterization, Modeling, Monitoring, and Remediation of Fractured Rock examines the state of practice and state of art in the characterization of fractured rock and the chemical and biological processes related to subsurface contaminant fate and transport. This report examines new developments, knowledge, and approaches to engineering at fractured rock sites since the publication of the 1996 National Research Council report Rock Fractures and Fluid Flow: Contemporary Understanding and Fluid Flow. Fundamental understanding of the physical nature of fractured rock has changed little since 1996, but many new characterization tools have been developed, and there is now greater appreciation for the importance of chemical and biological processes that can occur in the fractured rock environment. The findings of Characterization, Modeling, Monitoring, and Remediation of Fractured Rock can be applied to all types of engineered infrastructure, but especially to engineered repositories for buried or stored waste and to fractured rock sites that have been contaminated as a result of past disposal or other practices. The recommendations of this report are intended to help the practitioner, researcher, and decision maker take a more interdisciplinary approach to engineering in the fractured rock environment. This report describes how existing tools-some only recently developed-can be used to increase the accuracy and reliability of engineering design and management given the interacting forces of nature. With an interdisciplinary approach, it is possible to conceptualize and model the fractured rock environment with acceptable levels of uncertainty and reliability, and to design systems that maximize remediation and long-term performance. Better scientific understanding could inform regulations, policies, and implementation guidelines related to infrastructure development and operations. The recommendations for research and applications to enhance practice of this book make it a valuable resource for students and practitioners in this field.