Download or read book Optimal Sampled Data Control Systems written by Tongwen Chen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Among the many techniques for designing linear multivariable analogue controllers, the two most popular optimal ones are H2 and H-infinity optimization. The fact that most new industrial controllers are digital provides strong motivation for adapting or extending these techniques to digital control systems. This book, now available as a corrected reprint, attempts to do so. Part I presents two indirect methods of sampled-data controller design: These approaches include approximations to a real problem, which involves an analogue plant, continuous-time performance specifications, and a sampled-data controller. Part II proposes a direct attack in the continuous-time domain, where sampled-data systems are time-varying. The findings are presented in forms that can readily be programmed in, e.g., MATLAB.

Download or read book Control of Uncertain Sampled Data Systems written by Geir E. Dullerud and published by Springer Science & Business Media. This book was released on 1995-11-29 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: My main goal in writing this monograph is to provide a detailed treatment of uncertainty analysis for sampled-data systems in the context of sys tems control theory. Here, sampled-data system refers to the hybrid sys tem formed when continuous time and discrete time systems are intercon nected; by uncertainty analysis I mean achievable performance in the pres ence of worst -case uncertainty and disturbances. The focus of the book is sampled-data systems; however the approach presented is applicable to both standard and sampled-data systems. The past few years has seen a large surge in research activity centered around creating systematic methods for sampled-data design. The aim of this activity has been to deepen and broaden the, by now, sophisticated viewpoint developed for design of purely continuous time or discrete time systems (e.g. J{oo or -I!l optimal synthesis, J1 theory) so that it can be ap plied to the design of sampled-data systems. This research effort has been largely successful, producing both interesting new mathematical tools for control theory, and new methodologies for practical engineering design. Analysis of structured uncertainty is an important objective in control design, because it is a flexible and non-conservative way of analyzing sys tem performance, which is suitable in many engineering design scenarios.

Download or read book Sampled Data Models for Linear and Nonlinear Systems written by Juan I. Yuz and published by Springer Science & Business Media. This book was released on 2013-10-17 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sampled-data Models for Linear and Nonlinear Systems provides a fresh new look at a subject with which many researchers may think themselves familiar. Rather than emphasising the differences between sampled-data and continuous-time systems, the authors proceed from the premise that, with modern sampling rates being as high as they are, it is becoming more appropriate to emphasise connections and similarities. The text is driven by three motives: · the ubiquity of computers in modern control and signal-processing equipment means that sampling of systems that really evolve continuously is unavoidable; · although superficially straightforward, sampling can easily produce erroneous results when not treated properly; and · the need for a thorough understanding of many aspects of sampling among researchers and engineers dealing with applications to which they are central. The authors tackle many misconceptions which, although appearing reasonable at first sight, are in fact either partially or completely erroneous. They also deal with linear and nonlinear, deterministic and stochastic cases. The impact of the ideas presented on several standard problems in signals and systems is illustrated using a number of applications. Academic researchers and graduate students in systems, control and signal processing will find the ideas presented in Sampled-data Models for Linear and Nonlinear Systems to be a useful manual for dealing with sampled-data systems, clearing away mistaken ideas and bringing the subject thoroughly up to date. Researchers in statistics and economics will also derive benefit from the reworking of ideas relating a model derived from data sampling to an original continuous system.

Download or read book Discrete data Control Systems written by Benjamin C. Kuo and published by . This book was released on 1974 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Optimal Control written by Brian D. O. Anderson and published by Courier Corporation. This book was released on 2007-02-27 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerous examples highlight this treatment of the use of linear quadratic Gaussian methods for control system design. It explores linear optimal control theory from an engineering viewpoint, with illustrations of practical applications. Key topics include loop-recovery techniques, frequency shaping, and controller reduction. Numerous examples and complete solutions. 1990 edition.

Download or read book Linear Time Varying Systems and Sampled data Systems written by Akira Ichikawa and published by Springer Science & Business Media. This book was released on 2001-02-26 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph considers linear optimal regulators, differential games and develops the theory for time-varying systems and jump systems.

Download or read book Control Systems with Input and Output Constraints written by A.H. Glattfelder and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the reviews: [The authors] "...have succeeded in their intention to produce the first reference in the area that will be available for a broad audience. I think that this book will be a standard reference for a long time." Control Engineering Practice

Download or read book Linear Optimal Control Systems written by Huibert Kwakernaak and published by Wiley-Interscience. This book was released on 1972-11-10 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book attempts to reconcile modern linear control theory with classical control theory. One of the major concerns of this text is to present design methods, employing modern techniques, for obtaining control systems that stand up to the requirements that have been so well developed in the classical expositions of control theory. Therefore, among other things, an entire chapter is devoted to a description of the analysis of control systems, mostly following the classical lines of thought. In the later chapters of the book, in which modern synthesis methods are developed, the chapter on analysis is recurrently referred to. Furthermore, special attention is paid to subjects that are standard in classical control theory but are frequently overlooked in modern treatments, such as nonzero set point control systems, tracking systems, and control systems that have to cope with constant disturbances. Also, heavy emphasis is placed upon the stochastic nature of control problems because the stochastic aspects are so essential." --Preface.

Download or read book Feedback Control Theory written by John C. Doyle and published by Courier Corporation. This book was released on 2013-04-09 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: An excellent introduction to feedback control system design, this book offers a theoretical approach that captures the essential issues and can be applied to a wide range of practical problems. Its explorations of recent developments in the field emphasize the relationship of new procedures to classical control theory, with a focus on single input and output systems that keeps concepts accessible to students with limited backgrounds. The text is geared toward a single-semester senior course or a graduate-level class for students of electrical engineering. The opening chapters constitute a basic treatment of feedback design. Topics include a detailed formulation of the control design program, the fundamental issue of performance/stability robustness tradeoff, and the graphical design technique of loopshaping. Subsequent chapters extend the discussion of the loopshaping technique and connect it with notions of optimality. Concluding chapters examine controller design via optimization, offering a mathematical approach that is useful for multivariable systems.

Download or read book Digital Control Systems written by R. Isermann and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: The great advances made in large-scale integration of semiconductors, the resulting cost-effective digital processors and data storage devi ces, and the development of suitable programming techniques are all having increasing influence on the techniques of measurement and con trol and on automation in general. The application of digital techni ques to process automation started in about 1960 when the first process computer was installed. From about 1970 computers have become standard equipment for the automation of industrial processes, connected on-line in open or closed loop. The annual increase of installed process compu ters in the last decade was about 20- 30 %. The cost of hardware has shown a tendency to decrease, whereas the relative cost of user soft ware has tended to increase. Because of the relatively high total cost, the first phase of digital computer application to process control is characterized by the centralization of many functions in a single (though sometimes in several) process computer. Such centralization does not permit full utilization of the many advantages of digital signal processing and rapid economic pay-off as analog back-up systems or parallel standby computers must often be provided to cover possible breakdowns in the central computer. In 1971 the first microprocessors were marketed which, together with large-scale integrated semiconductor memory units and input/output mo dules, can be assembled into more cost-effective process microcompu ters.

Download or read book Control System Design written by Graham Clifford Goodwin and published by Pearson. This book was released on 2001 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: For both undergraduate and graduate courses in Control System Design. Using a "how to do it" approach with a strong emphasis on real-world design, this text provides comprehensive, single-source coverage of the full spectrum of control system design. Each of the text's 8 parts covers an area in control--ranging from signals and systems (Bode Diagrams, Root Locus, etc.), to SISO control (including PID and Fundamental Design Trade-Offs) and MIMO systems (including Constraints, MPC, Decoupling, etc.).

Download or read book Optimal Sampled data Control Systems written by Tongwen Chen and published by . This book was released on 1995 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sampled Data Control Systems written by Jürgen Ackermann and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first German edition of this book appeared in 1972, and in Polish translation in 1976. It covered the analysis and synthesis of sampled-data systems. The second German edition of 1983 ex tended the scope to design, in particular design for robustness of control system properties with respect to uncertainty of plant parameters. This book is a revised translation of the second Ger man edition. The revisions concern primarily a new treatment of the finite effect sequences and the use of nice numerical proper ties of Hessenberg forms. The introduction describes examples of sampled-data systems, in particular digital controllers, and analyzes the sampler and hold; also some design aspects are introduced. Chapter 2 reviews the modelling and analysis of continuous systems. Pole shifting is formulated as an affine mapping, here some n~w material on fixing some eigenvalues or some gains in a design step is included. Chapter 3 treats the analysis of sampled-data systems by state space and z-transform methods. This includes sections on inter sampling behavior, time-delay systems, absolute stability and non synchronous sampling. Chapter 4 treats controllability and reach ability of discrete-time systems, controllability regions for con strained inputs and the choice of the sampling interval primarily under controllability aspects. Chapter 5 deals with observability and constructability both from the discrete and continuous plant output. Full and reduced order observers are treated as well as disturbance observers.

Download or read book Optimum Sampled data Control System with Quantized Control Functions written by Kosnendar Djadjuri and published by . This book was released on 1966 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sampled data Control of Logical Networks written by Yang Liu and published by Springer Nature. This book was released on 2023-03-09 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book mainly focuses on the sampled-data control of logical networks. We believe that the methods (semi-tensor product of matrices), results (recent results on Boolean control networks under periodic sampled-data control, Boolean control networks under aperiodic sampled-data control, and logical control networks under event-triggered control) and topics (logical networks) in this book have become of particular interest to readers recently. Firstly, logical networks are of interest due to their rich range of applications in biology, game theory, coding, finite automata, graph theory, and other fields. Secondly, semi-tensor product of matrices offers a useful tool for formulating, analyzing and designing controllers for logical networks. Moreover, this book is the first to introduce sampled-data control into the study of logical control networks. All research results in this book are novel and worthy of further study. The book’s content is divided into three parts (Boolean control networks under periodic sampled-data control, Boolean control networks under aperiodic sampled-data control, and logical control networks under event-triggered control), which essentially progress from easier to more difficult. In addition, corresponding examples and diagrams are included in each section to facilitate understanding.

Download or read book Sampling in Digital Signal Processing and Control written by Arie Feuer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Undoubtably one of the key factors influencing recent technology has been the advent of high speed computational tools. Virtually every advanced engi neering system we come in contact with these days depends upon some form of sampling and digital signal processing. Well known examples are digital tele phone systems, digital recording of audio signals and computer control. These developments have been matched by the appearance of a plethora of books which explain a variety of analysis, synthesis and design tools applica ble to sampled-data systems. The reader might therefore wonder what is distinc tive about the current book. Our observation of the existing literature is that the underlying continuous-time system is usually forgotten once the samples are tak en. The alternative point of view, adopted in this book, is to formulate the analy sis in such a way that the user is constantly reminded of the presence of the under lying continuous-time signals. We thus give emphasis to two aspects of sampled-data analysis: Firstly, we formulate the various algorithms so that the appropriate contin uous-time case is approached as the sampling rate increases. Secondly we place emphasis on the continuous-time output response rath er than simply focusing on the sampled response.

Download or read book Feedback Systems written by Karl Johan Åström and published by Princeton University Press. This book was released on 2021-02-02 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The essential introduction to the principles and applications of feedback systems—now fully revised and expanded This textbook covers the mathematics needed to model, analyze, and design feedback systems. Now more user-friendly than ever, this revised and expanded edition of Feedback Systems is a one-volume resource for students and researchers in mathematics and engineering. It has applications across a range of disciplines that utilize feedback in physical, biological, information, and economic systems. Karl Åström and Richard Murray use techniques from physics, computer science, and operations research to introduce control-oriented modeling. They begin with state space tools for analysis and design, including stability of solutions, Lyapunov functions, reachability, state feedback observability, and estimators. The matrix exponential plays a central role in the analysis of linear control systems, allowing a concise development of many of the key concepts for this class of models. Åström and Murray then develop and explain tools in the frequency domain, including transfer functions, Nyquist analysis, PID control, frequency domain design, and robustness. Features a new chapter on design principles and tools, illustrating the types of problems that can be solved using feedback Includes a new chapter on fundamental limits and new material on the Routh-Hurwitz criterion and root locus plots Provides exercises at the end of every chapter Comes with an electronic solutions manual An ideal textbook for undergraduate and graduate students Indispensable for researchers seeking a self-contained resource on control theory