Download or read book Optimal Placement of Actuators and Sensors for Vibration Control Using Genetic Algorithms written by Robert Walter Szczepanski and published by . This book was released on 2001 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optimization Strategies for Sensor and Actuator Placement written by Sharon L. Padula and published by . This book was released on 1999 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper provides a survey of actuator and sensor placement problems from a wide range of engineering disciplines and a variety of applications. Combinatorial optimization methods are recommended as a means for identifying sets of actuators and sensors that maximize performance. Several sample applications from NASA Langley Research Center such as active structural acoustic control are covered in detail. Laboratory and flight tests of these applications indicate that actuator and sensor placement methods are effective and important. Lessons learned in solving these optimization problems can guide future research.
Download or read book Optimization Control and Applications in the Information Age written by Athanasios Migdalas and published by Springer. This book was released on 2015-07-30 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent developments in theory, algorithms, and applications in optimization and control are discussed in this proceedings, based on selected talks from the ‘Optimization Control and Applications in the Information Age’ conference, organized in honor of Panos Pardalos’s 60th birthday. This volume contains numerous applications to optimal decision making in energy production and fuel management, data mining, logistics, supply chain management, market network analysis, risk analysis, and community network analysis. In addition, a short biography is included describing Dr. Pardalos’s path from a shepherd village on the high mountains of Thessaly to academic success. Due to the wide range of topics such as global optimization, combinatorial optimization, game theory, stochastics and programming contained in this publication, scientists, researchers, and students in optimization, operations research, analytics, mathematics and computer science will be interested in this volume.
Download or read book Optimal Placement of Actuators in Fiber Reinforced Polymer Composite Shell Structures Using Genetic Algorithm written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Active vibration control of smart FRP composite structures finds use in high performance structures especially in light weight composite structures. Proper implementation of such smart structure systems demands complete understanding of their responses, optimal placement of sensors and actuators, and design of an appropriate control system. In the present work, an improved genetic algorithm (GA) based optimal collocated sensors and actuators of smart fiber reinforced polymer (FRP) composite shell structures has been presented. Layered shell finite elements have been formulated and the formulation has been validated for coupled electromechanical analysis of curved smart FRP composite structures having piezoelectric sensors and actuators patches. Modal analysis has been performed to transfer the coupled finite element equation to state space equation. An integer-coded GA-based open-loop procedure has been implemented for optimal placement of actuators for maximizing controllability index. This type of GA with uniform crossover and mutation technique has been developed to efficiently search for optimal locations of sensors/actuators. In this project, we have used integer coded GA to find optimal placement of actuators on spherical shell structures and semi-circular ring.
Download or read book Advances on Analysis and Control of Vibrations written by Mauricio Zapateiro and published by BoD – Books on Demand. This book was released on 2012-09-05 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration is a phenomenon that we can perceive in many systems. Their effects are as diverse as the personal discomfort that can produce the unevenness of a road or the collapse of a building or a bridge during an earthquake. This book is a compendium of research works on vibration analysis and control. It goes through new methodologies that help us understand and mitigate this phenomenon. This book is divided into two sections. The first one is devoted to new advances on vibration analysis while the second part is a series of case studies that illustrate novel techniques on vibration control. The applications are varied and include areas such as vehicle suspension systems, wind turbines and civil engineering structures.
Download or read book Vibration Engineering written by Nitesh P. Yelve and published by CRC Press. This book was released on 2024-05-15 with total page 109 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration Engineering presents recent developments in the field of engineering, encompassing industrial norms, applications within the finite element method, infrastructure safety assessment, and active vibration control strategies. It offers a study in seismic vibration control and analysis for building structures and liquid storage tanks. Spanning across the multiple domains of vibration engineering, the book highlights machinery diagnostics, modal analysis, energy harvesting, balancing, vibration isolation, and human-vibration interaction. It discusses experimental fault identification in journal bearings using vibration-based methods. This book also considers advances in vibration-based structural health monitoring of civil infrastructures. This book will be a useful reference for industry professionals and engineers facing challenges while dealing with the vibrations in the fields of mechanical, aerospace, structural, and civil engineering.
Download or read book Recent Advances in Mechanical Engineering written by Gaurav Manik and published by Springer Nature. This book was released on 2022-09-08 with total page 1149 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of 2nd International Congress on Advances in Mechanical and Systems Engineering (CAMSE 2021). It focuses on the recent advances in mechanical and systems engineering and their growing demands for increase in several design and development activities. The contents in this book cover a blend of mechanical engineering, computer-aided engineering, control engineering, and systems engineering to design and manufacture useful products. Various additional topics covered include mechanics, machines, materials science, thermo-fluids, and control with state-of-the-art computational methods to analyse, innovate, design, implement and operate complex systems which are economic, reliable, efficient and sustainable. Given the contents, this book will be useful for researchers and professionals working in the field of mechanical engineering and allied fields.
Download or read book Advances in Rotor Dynamics Control and Structural Health Monitoring written by Subashisa Dutta and published by Springer Nature. This book was released on 2020-08-29 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of selected and peer-reviewed papers presented at the 13th International Conference on Vibration Problems (ICOVP 2017). The topics covered in this book are broadly related to the fields of structural health monitoring, vibration control and rotor dynamics. In the structural health monitoring section studies on nonlinear dynamic analysis, damage identification, viscoelastic model of concrete, and seismic damage assessment are thoroughly discussed with analytical and numerical techniques. The vibration control part includes topics such as multi-storeyed stacked tuned mass dampers, vibration isolation with elastomeric mounts, and nonlinear active vibration absorber. This book will be useful for beginners, researchers and professionals interested in the field of vibration control, structural health monitoring and rotor dynamics.
Download or read book Optimization of Structural and Mechanical Systems written by Jasbir S. Arora and published by World Scientific. This book was released on 2007 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a discussion of the general impact of WTO membership on both sides of the Taiwan Strait, and addresses the political and economic impact on cross-Strait relations of common membership. The book begins with an introduction which analyzes the state of cross-Strait economic and political relations on the eve of dual accession to the WTO and briefly introduces the chapters which follow. The first chapter discusses the concessions made by both sides in their accession agreements and is followed by two chapters which describe the manner in which the Taiwan economy was reformed to achieve compliance as well as the specific, restrictive trade regime that was put into place to manage mainland trade. The next two chapters deal with the implications of that restrictive trade regime for the Taiwan economy in Asia and with the nature of the interactions between the two sides within the WTO. The final four chapters of the volume examine the impact of membership on four sectors of the economy: finance; agriculture; electronics and automobiles. There is a post-script which briefly covers developments since the chapters were completed.
Download or read book Analysis of Piezoelectric Structures and Devices written by Daining Fang and published by Walter de Gruyter. This book was released on 2013-08-01 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited work covers piezoelectric materials in the form of beams, plates, shells, and other structural components in modern devices and structures. Applications are frequency control and detection functions in resonators, sensors, actuators, oscillations, and other smart and intelligent structures. The products and technology are with us in our daily life through computers and communication devices. The contributions cover novel methods for the analysis of piezoelectric structures including wave propagation, high frequency vibration, material characterization, and optimization of structures. Understanding of these methods is increasingly important in the design and modelling of next generation devices and micro-structures with piezoelectric elements and effects.
Download or read book Computational Signal Processing and Analysis written by Asoke K. Nandi and published by Springer. This book was released on 2018-04-02 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises a collection of papers by international experts, presented at the International Conference on NextGen Electronic Technologies (ICNETS2-2017). ICNETS2 encompassed six symposia covering all aspects of electronics and communications engineering domains, including relevant nano/micro materials and devices. Featuring the latest research on computational signal processing and analysis, the book is useful to researchers, professionals, and students working in the core areas of electronics and their applications, especially signal processing, embedded systems, and networking.
Download or read book Proceeding of the Second International Conference on Microelectronics Computing Communication Systems MCCS 2017 written by Vijay Nath and published by Springer. This book was released on 2018-07-30 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume presents high quality papers presented at the Second International Conference on Microelectronics, Computing & Communication Systems (MCCS 2017). The book discusses recent trends in technology and advancement in MEMS and nanoelectronics, wireless communications, optical communication, instrumentation, signal processing, image processing, bioengineering, green energy, hybrid vehicles, environmental science, weather forecasting, cloud computing, renewable energy, RFID, CMOS sensors, actuators, transducers, telemetry systems, embedded systems, and sensor network applications. It includes original papers based on original theoretical, practical, experimental, simulations, development, application, measurement, and testing. The applications and solutions discussed in the book will serve as a good reference material for future works.
Download or read book Smart Civil Structures written by You-Lin Xu and published by CRC Press. This book was released on 2017-04-11 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: A smart civil structure integrates smart materials, sensors, actuators, signal processors, communication networks, power sources, diagonal strategies, control strategies, repair strategies, and life-cycle management strategies. It should function optimally and safely in its environment and maintain structural integrity during strong winds, severe earthquakes, and other extreme events. This book extends from the fundamentals to the state-of-the-art. It covers the elements of smart civil structures, their integration, and their functions. The elements consist of smart materials, sensors, control devices, signal processors, and communication networks. Integration refers to multi-scale modelling and model updating, multi-type sensor placement, control theory, and collective placement of control devices and sensors. And the functions include structural health monitoring, structural vibration control, structural self-repairing, and structural energy harvesting, with emphasis on their synthesis to form truly smart civil structures. It suits civil engineering students, professionals, and researchers with its blend of principles and practice.
Download or read book Piezoelectric Multilayer Beam Bending Actuators written by Rüdiger G. Ballas and published by Springer Science & Business Media. This book was released on 2007-03-06 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the application of piezoelectric materials, particularly piezoceramics, in the wide field of actuators and sensors. It gives a step-by-step introduction to the structure and mechanics of piezoelectric beam bending actuators in multilayer technology, which are of increasing importance for industrial applications. The book presents the suitability of the developed theoretical aspects in a memorable way.
Download or read book Inverse Problems Design and Optimization vol 2 written by and published by Editora E-papers. This book was released on with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamical Systems and Control written by Firdaus E. Udwadia and published by CRC Press. This book was released on 2004-05-10 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 11th International Workshop on Dynamics and Control brought together scientists and engineers from diverse fields and gave them a venue to develop a greater understanding of this discipline and how it relates to many areas in science, engineering, economics, and biology. The event gave researchers an opportunity to investigate ideas and techniq
Download or read book Advances in Noise Analysis Mitigation and Control written by Noor Ahmed and published by BoD – Books on Demand. This book was released on 2016-10-05 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: The adverse impacts from excess noise on human health and daily activities have accelerated at an alarming rate over the last few decades. This has prompted significant research into noise attenuation and mitigation of these unwanted effects. This book is a collection of works from eminent researchers from around the world, who address the aforementioned issues. It provides the most up-to-date information on current work being conducted in the field of noise pollution and is of value to a wide range of students, engineers, scientists and industry consultants who wish to further understand current methodologies and emerging concepts.
