Download or read book Optimal manufacturing remanufacturing policies in a lean production environment written by Sergio Rubio and published by . This book was released on 2006 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Remanufacturing Modeling and Analysis written by Mehmet Ali Ilgin and published by CRC Press. This book was released on 2016-04-19 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: New, Now, Next. Consumers' ever growing appetite to acquire new products and their short courtship with them has kept manufacturers busy not only expending resources at an alarming rate, but also depleting these resources and giving rise to waste and pollution at a correspondingly increasing and disturbing rate. Traditional manufacturing methods th
Download or read book Responsible Manufacturing written by Ammar Y. Alqahtani and published by CRC Press. This book was released on 2019-02-25 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Responsible Manufacturing has become an obligation to the environment and to society itself, enforced primarily by customer perspective and governmental regulations on environmental issues. This is mainly driven by the escalating deterioration of the environment, such as diminishing raw material resources, overflowing waste sites, and increasing levels of pollution. Responsible Manufacturing related issues have found a large following in industry and academia, which aim to find solutions to the problems that arise in this newly emerged research area. Problems are widespread, including the ones related to the lifecycle of products, disassembly, material recovery, remanufacturing, and pollution prevention. Organized into sixteen chapters, this book provides a foundation for academicians and practitioners, and addresses several important issues faced by strategic, tactical, and operation planners of Responsible Manufacturing. Using efficient models in a variety of decision-making situations, it provides easy-to-use mathematical and/or simulation modeling-based solution methodologies for the majority of the issues. Features Addresses a variety of state-of-the-art issues in Responsible Manufacturing Highlights how popular industrial engineering and operations research techniques can be effectively exploited to find the most effective solutions to problems Presents how a specific issue can be approached or modeled in a given decision-making situation Covers strategic, tactical, and operational systems issues Provides a foundation for academicians and practitioners interested in building bodies of knowledge in this new and fast-growing area
Download or read book Proceedings of the 21st International Conference on Industrial Engineering and Engineering Management 2014 written by Ershi Qi and published by Springer. This book was released on 2015-01-06 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Being the premier forum for the presentation of new advances and research results in the fields of Industrial Engineering, IEEM 2014 aims to provide a high-level international forum for experts, scholars and entrepreneurs at home and abroad to present the recent advances, new techniques and applications face and face, to promote discussion and interaction among academics, researchers and professionals to promote the developments and applications of the related theories and technologies in universities and enterprises and to establish business or research relations to find global partners for future collaboration in the field of Industrial Engineering. All the goals of the international conference are to fulfill the mission of the series conference which is to review, exchange, summarize and promote the latest achievements in the field of industrial engineering and engineering management over the past year and to propose prospects and vision for the further development.
Download or read book Towards Lean Remanufacturing written by Jelena Kurilova-Pališaitien? and published by Linköping University Electronic Press. This book was released on 2015-05-25 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Remanufacturing is an environmentally sound material recovery option which is essential to compete for sustainable manufacturing. The aim with remanufacturing at a majority of companies is to prolong physical product performance by delivering the same or betterthan-original product quality. In general, remanufacturing is an industrial process that brings used products back to useful life by requiring less effort than is demanded by the initial production process. Consequently, from a product life-cycle perspective, remanufacturing generates great product value. Remanufacturers lag behind manufacturers since they often face complex and unpredictable material and information flows. Based on a review of remanufacturing research, remanufacturing challenges in material and information flows can be classified into three groups: insufficient product quality, long and unstable process lead times, and an unpredictable level of inventory. While some remanufacturing researchers state that manufacturing and remanufacturing are significantly different, they have more in common than many other processes operations. Therefore, to sustain competitive remanufacturing, companies investigate an opportunity for improvement through the employment of lean production that generates significant benefits for manufacturers. In order to investigate the potential to address remanufacturing challenges by lean production, a Minimum time for material and information flow analysis (MiniMifa) method was developed. This method originates from the value stream mapping (VSM) method, broadly practiced to bring lean to manufacturing companies. The focus of MiniMifa was to collect empirical data on the identified groups of remanufacturing challenges from the remanufacturing perspective, and to provide a basis for the development of improvements originating from lean principles. Lean production was selected for this research due to its system perspective on material and information flows. Among the defined lean principles in remanufacturing, a pull principle was investigated at the case companies. The suggested principle demonstrated a reduction in lead time, followed by improvements in inventory level and product quality. However, in order to become lean, remanufacturers have to overcome three levels of lean remanufacturing challenges: external and internal challenges as well as lean wastes. Finally, this research reduces the gap between academia and industry by contributing with a possible solution to the identified remanufacturing challenges in material and information flows.
Download or read book Dynamic Methods and Process Advancements in Mechanical Manufacturing and Materials Engineering written by Davim, J. Paulo and published by IGI Global. This book was released on 2012-07-31 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering and design are often a necessary steps for an industry to become effective. Industry modeling can help to bridge the communication gap among engineers and system designers. Dynamic Methods and Process Advancements in Mechanical, Manufacturing, and Materials Engineering examines the principles of physics and materials science for analysis, design, manufacturing and maintenance of mechanical equipments and systems. Targeting researchers, practitioners, and academicians, this volume promotes innovative findings in mechanical, manufacturing and materials engineering.
Download or read book Design for Innovative Value Towards a Sustainable Society written by Mitsutaka Matsumoto and published by Springer Science & Business Media. This book was released on 2012-04-03 with total page 1152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first EcoDesign International Symposium held in 1999, this symposium has led the research and practices of environmentally conscious design of products, services, manufacturing systems, supply chain, consumption, as well as economics and society. EcoDesign 2011 - the 7th International Symposium on Environmentally Conscious Design and Inverse Manufacturing - was successfully held in the Japanese old capital city of Kyoto, on November 30th – December 2nd, 2011. The subtitle of EcoDesign 2011 is to “design for value innovation towards sustainable society.” During this event, presenters discussed the way to achieve both drastic environmental consciousness and value innovation in order to realise a sustainable society.
Download or read book Warranty and Preventive Maintenance for Remanufactured Products written by Ammar Y. Alqahtani and published by CRC Press. This book was released on 2018-12-12 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: The exponential increase in the development of technology coupled with the customers’ immense desire to possess the newest technological products makes for truncated product lifespans, which instigates a substantial upsurge in their rate of disposal. Attempts have been made to establish specialized product recovery facilities with the intention of diminishing the volume of accumulated waste delivered to landfills using product recovery procedure such as remanufacturing. The economic benefits produced by remanufacturing also portray the role of product recovery in a more attractive light. The quality of a remanufactured product is uncertain for some consumers. Therefore, these consumers possess insecurities in deciding whether or not the remanufactured products will render the same expected performance. This ambiguity regarding a remanufactured product could possibly result in the consumer deciding against its purchase. With such consumer apprehension, remanufacturers often seek market mechanisms that provide reassurance as to the stable durability that these products still maintain. One strategy that the remanufacturers often use is the utilization of the premise of offering product warranties with preventive maintenance on their products. This book is concerned with the practice and theory of warranty management and preventive maintenance, particularly in relation to remanufactured products’ warranties. Models developed in this book can be used for making the right decisions in offering renewable, nonrenewable, one and two dimensional warranty policies, and for managerial decision in considering maintenance contracts or outsourcing maintenance for remanufactured components and products. Features Discusses a variety of warranty policies and preventive maintenance of remanufactured products (first book to do so) Presents mathematical models and applications for warranty policies using examples and simulation results Considers cost and optimization problems from the remanufacturer's and buyer's points of views Provides a foundation for academicians interested in building models in the area of warranty and preventive maintenance analysis of remanufactured products Offers the essential methodology needed by practitioners involved with warranty and preventive maintenance analysis, along with extensive references for further research
Download or read book Toward Sustainable Operations of Supply Chain and Logistics Systems written by Voratas Kachitvichyanukul and published by Springer. This book was released on 2015-07-06 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses critical issues in today’s logistics operations and supply chain management, with a special focus on sustainability. In dedicated chapters the authors address aspects concerning multimode logistics operations, reverse network configuration, forward and reverse supply chain integration, improvement of the production operations and management of the recovery activities, as well as carbon footprint reduction in transportation. Selected best practices from different countries and industries are presented to aid in the implementation of sustainable policies in private enterprises and at public-sector institutions. The book offers a valuable resource for both academics and practitioners who wish to deepen their expertise in the field of logistics operations and management with regard to sustainability issues. The book examines both qualitative and qualitative aspects of sustainable supply chain and logistics operations.
Download or read book Supply Chain Management Strategies and Risk Assessment in Retail Environments written by Kumar, Akhilesh and published by IGI Global. This book was released on 2017-12-15 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proper understanding and managing of project risks and uncertainties is crucial to any organization. It is paramount that all phases of project development and execution are monitored to avoid poor project results from meager economics, overspending, and reputation. Supply Chain Management Strategies and Risk Assessment in Retail Environments is a comprehensive reference source for the latest scholarly material on effectively managing risk factors and implementing the latest supply management strategies in retail environments. Featuring coverage on relevant topics such as omni-channel retail, green supply chain, and customer loyalty, this book is geared toward academicians, researchers, and students seeking current research on the challenges and opportunities available in the realm of retail and the flow of materials, information, and finances between companies and consumers.
Download or read book Reverse Supply Chains written by Surendra M. Gupta and published by CRC Press. This book was released on 2016-04-19 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Winner of IIE Book of the Month, December 2013The introduction of reverse supply chains has created many challenges in network design, transportation, selection of used products, selection and evaluation of suppliers, performance measurement, marketing-related issues, end-of-life (EOL) alternative selection, remanufacturing, disassembly, and produc
Download or read book International Asia Conference on Industrial Engineering and Management Innovation IEMI2012 Proceedings written by Ershi Qi and published by Springer Science & Business Media. This book was released on 2013-05-29 with total page 1666 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Conference on Industrial Engineering and Engineering Management is sponsored by the Chinese Industrial Engineering Institution, CMES, which is the only national-level academic society for Industrial Engineering. The conference is held annually as the major event in this arena. Being the largest and the most authoritative international academic conference held in China, it provides an academic platform for experts and entrepreneurs in the areas of international industrial engineering and management to exchange their research findings. Many experts in various fields from China and around the world gather together at the conference to review, exchange, summarize and promote their achievements in the fields of industrial engineering and engineering management. For example, some experts pay special attention to the current state of the application of related techniques in China as well as their future prospects, such as green product design, quality control and management, supply chain and logistics management to address the need for, amongst other things low-carbon, energy-saving and emission-reduction. They also offer opinions on the outlook for the development of related techniques. The proceedings offers impressive methods and concrete applications for experts from colleges and universities, research institutions and enterprises who are engaged in theoretical research into industrial engineering and engineering management and its applications. As all the papers are of great value from both an academic and a practical point of view, they also provide research data for international scholars who are investigating Chinese style enterprises and engineering management.
Download or read book Pursuing Sustainability written by Chialin Chen and published by Springer Nature. This book was released on 2021-03-03 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook includes three parts, corresponding to the following three domains of OR/MS research related to sustainability: (i) Systems Design, Innovation, and Technology, (ii) Manufacturing, Logistics, and Transportation, and (iii) Sustainable Natural Resource Management. The first part of the handbook (Chapters 2-6) will focus on the creation and development of sustainable products, services, value chains, and organizations from a systems perspective. Key areas to be covered include Green Design & Innovation, Technology and Engineering Management, Sustainable Value Chain Systems, Sustainability Standards and Performance Evaluation, and Circular Economy and New Research Directions in Sustainability. The second part of the handbook (Chapters 7-11) will concentrate on the major operational and logistic issues faced by today’s industries in pursuing sustainability. Key areas to be covered include Remanufacturing, Reverse Logistics, Closed-Loop Supply Chains, Sustainable Transportation, and New Research Directions in Green Supply Chain Management. The third part of the proposed handbook (Chapters 12-16) will center on major sustainability issues in managing engineering infrastructure and natural resources. Key areas to be covered include Renewable Energy, Sustainable Water Resource, Biofuel Infrastructure, Natural Gas, and New Research Direction in Sustainable Resource Management. The handbook aims to bridge the three main OR/MS research domains in sustainability: “Systems Design, Innovation, and Technology,” “Manufacturing, Logistics, and Transportation,” and “Sustainable Natural Resource Management.” Traditionally, these domains are treated separately in the OR/MS literature. By combining the three domains, the handbook will provide a more holistic treatment of MS/OR methodologies to address critical sustainability issues faced by today’s society. Unlike most existing handbooks which only focus on current OR/MS research in sustainability within a domain, this handbook will include a concluding chapter in each of the three parts to discuss and identify potential future research directions in each of the three main domains.
Download or read book Proceedings of 2013 4th International Asia Conference on Industrial Engineering and Management Innovation IEMI2013 written by Ershi Qi and published by Springer Science & Business Media. This book was released on 2014-01-16 with total page 1039 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of the 4th International Asia Conference on Industrial Engineering and Management Innovation (IEMI 2013) is to bring together researchers, engineers and practitioners interested in the application of informatics to usher in new advances in the industrial engineering and management fields.
Download or read book Optimal Policies in Hybrid Manufacturing Remanufacturing Systems with Product Substitution written by Karl Inderfurth and published by . This book was released on 2002 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Policing in Israel written by Tal Jonathan-Zamir and published by CRC Press. This book was released on 2015-10-05 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: "It is hoped that, through this series, it will be possible to accelerate the process of building knowledge about policing and help bridge the gap between the two worlds the world of police research and police practice. This is an invitation to police scholars and practitioners across the world to come and join in this venture." Dilip K. Das, PhD,
Download or read book Logistics Management written by Jan Dethloff and published by Springer. This book was released on 2014-12-30 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers papers presented at the Logistik-Management-Konferenz 2013, which was organized by the VHB Wissenschaftliche Kommission Logistik and held in Bremen, Germany. The papers reflect the current state-of-the-art in logistics and supply chain management, focusing on environmental sustainability in logistics and supply chain network dynamics and control. The target audience primarily consists of researchers and practitioners in the field, but the book may also be beneficial for graduate students.
