Download or read book Optimal Dynamic Inversion written by Shahin Rouhani and published by . This book was released on 2021 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rotating machinery is commonly used in mechanical systems, including machining tools, aircraft gas turbine engines, and other industrial applications. However, the synchronous vibration due to the rotor mass unbalance is the common disturbance source encountered in rotor operations. Unbalance occurs when the rotor's inertia axis does not match its axis of geometry. Given the cost and difficulty of the perfect balancing and the current trend for high-speed operations, which is directly correlated with the greater centrifugal unbalance forces, vibration control is essential in improving achieving longer bearing, spindle, and tool life in high-speed machining. As opposed to conventional ball bearings, Active Magnetic Bearings (AMBs) provide both the contact-less support and the possibility for applying real-time force to regulate the rotor-dynamic behaviors. This additional control facility allows the rotor to spin around its principal axis of inertia if a sufficient air gap exists between the rotor and housing. Consequently, by annihilating the rotor's centrifugal force, the rotor vibration dramatically decreases and no reaction forces are transmitted to the housing. Beyond the functionality of AMB in reducing the rotor vibration, the aspects of safety and reliability have become important in all rotor operations. The AMB is a highly nonlinear and open-loop unstable system, and therefore it is common that the control system includes different controllers, tailored for different regimes of the operating conditions. However, the stability of the entire control system depends on the flawless operation of its sensors and actuators. Otherwise, the malfunctioning of any system components may disturb the stability of the supported rotor resulting in damage to the whole system. Hence, to ensure the safe operation and reliable performance of AMB, an online Fault Detection and Isolation (FDI) scheme is necessary to identify the faulty components and safeguard the system to remain in a safe region when faults are detected. Given the inherited cost and complexity of adding redundant physical components, this dissertation presents a novel model-based FDI scheme for the AMB based on analytical redundancy by integrating two linear estimators called the Game-Theoretic Detection Filter (GTDF) and the Unknown Input Observer (UIO). Optimal inversion filters for both estimation and compensation are also introduced for the unified framework of the integrated fault detection, estimation, and Disturbance Observer-Based Control (DOBC) that safely switches between controllers when faults are detected. By extending and exploiting the Youla parameterization of stabilizing controllers, where the robust feedback control, the fault detection, and DOBC are realized by a bank of full-order state observers running in parallel, the controller in each regime always stabilizes the AMB. Lastly, a novel multi-variable Adaptive Feedforward Control (AFC) scheme featured by optimal delay-inversion-based compensation is proposed and implemented for its premium on stability and its simplicity in selecting the delay length as the single design parameter for the multi-variable controller to suppress the synchronous vibrations during varying and constant speed operations.

Download or read book Non Cooperative Target Tracking Fusion and Control written by Zhongliang Jing and published by Springer. This book was released on 2018-06-25 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a concise and comprehensive overview of non-cooperative target tracking, fusion and control. Focusing on algorithms rather than theories for non-cooperative targets including air and space-borne targets, this work explores a number of advanced techniques, including Gaussian mixture cardinalized probability hypothesis density (CPHD) filter, optimization on manifold, construction of filter banks and tight frames, structured sparse representation, and others. Containing a variety of illustrative and computational examples, Non-cooperative Target Tracking, Fusion and Control will be useful for students as well as engineers with an interest in information fusion, aerospace applications, radar data processing and remote sensing.

Download or read book Fault Tolerant Flight Control written by Christopher Edwards and published by Springer. This book was released on 2010-04-18 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by leading experts in the field, this book provides the state-of-the-art in terms of fault tolerant control applicable to civil aircraft. The book consists of five parts and includes online material.

Download or read book Advances in Small Satellite Technologies written by PSR Srinivasa Sastry and published by Springer Nature. This book was released on 2020-05-04 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains select papers presented during the 1st International Conference on Small Satellites, discussing the latest research and developments relating to small satellite technology. The papers cover various issues relating to design and engineering, ranging from the control, mechanical and thermal systems to the sensors, antennas and RF systems used. The volume will be of interest to scientists and engineers working on or utilizing satellite and space technologies.

Download or read book Dynamic Inversion Control with Linear Quadratic Feedback Loops written by Hüseyin Hakan Fer and published by . This book was released on 1997 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Robust and Adaptive Control written by Eugene Lavretsky and published by Springer Nature. This book was released on 2023 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Zusammenfassung: Robust and Adaptive Control (second edition) shows readers how to produce consistent and accurate controllers that operate in the presence of uncertainties and unforeseen events. Driven by aerospace applications, the focus of the book is primarily on continuous-time dynamical systems. The two-part text begins with robust and optimal linear control methods and moves on to a self-contained presentation of the design and analysis of model reference adaptive control for nonlinear uncertain dynamical systems. Features of the second edition include: sufficient conditions for closed-loop stability under output feedback observer-based loop-transfer recovery (OBLTR) with adaptive augmentation; OBLTR applications to aerospace systems; case studies that demonstrate the benefits of robust and adaptive control for piloted, autonomous and experimental aerial platforms; realistic examples and simulation data illustrating key features of the methods described; and problem solutions for instructors and MATLAB® code provided electronically. The theory and practical applications address real-life aerospace problems, being based on numerous transitions of control-theoretic results into operational systems and airborne vehicles drawn from the authors' extensive professional experience with The Boeing Company. The systems covered are challenging--often open-loop unstable with uncertainties in their dynamics--and thus require both persistently reliable control and the ability to track commands either from a pilot or a guidance computer. Readers should have a basic understanding of root locus, Bode diagrams, and Nyquist plots, as well as linear algebra, ordinary differential equations, and the use of state-space methods in analysis and modeling of dynamical systems. The second edition contains a background summary of linear systems and control systems and an introduction to state observers and output feedback control, helping to make it self-contained. Robust and Adaptive Control teaches senior undergraduate and graduate students how to construct stable and predictable control algorithms for realistic industrial applications. Practicing engineers and academic researchers will also find the book of great instructional value

Download or read book Dynamic Inversion based Adaptive reconfigurable Control of the X 33 on Ascent written by David B. Doman and published by . This book was released on 2002 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: A quaternion-based attitude control system is developed for the X-33 in the ascent flight phase. A nonlinear control law commands body-axis rotation rates that align the angular velocity vector with an Euler axis defining the axis of rotation that will rotate the body-axis system into a desired-axis system. The magnitudes of the commanded body rates are determined by the magnitude of the rotation error. The commanded body rates form the input to a dynamic inversion-based adaptive/reconfigurable control law. The indirect adaptive control portion of the control law uses online system identification to estimate the current control effectiveness matrix to update a control allocation module. The control allocation nominally operates in a minimum deflection mode; however, if a fault is detected, it can operate in a null-space injection mode that excites and decorrelates the effectors without degrading the vehicle response to enable online system identification. The overall 5 stem is designed to provide fault and damage tolerance for the X-33 on ascent.

Download or read book Optimum Dynamic Design written by and published by Allied Publishers. This book was released on 1997 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Single Network Adaptive Critic Aided Nonlinear Dynamic Inversion written by Geethalakshmi Shivanapura Lakshmikanth and published by . This book was released on 2012 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approximate Dynamic Programming (ADP) offers a systematic method of optimal control design for nonlinear systems. Of the many architectures based on ADP, Adaptive Critic (AC) is the most popular. An AC consists of two neural networks that interactively train each other to arrive at the optimal control solution. Single Network Adaptive Critic (SNAC) is an improvement over the AC. As the name suggests, it consists of only one network but, at the same time, achieves faster convergence to the optimal solution. The advantages of SNAC have been harnessed very well in optimal state regulation applications. However, literature concerning the direct use of SNAC in command following applications seems sparse. This is probably because of the fact that it is practically difficult to anticipate a proper training domain to train the SNAC neural network when the commands are not known a-priori. Nonlinear Dynamic Inversion (NDI) is a sub-optimal, nonlinear control design method that offers a closed form solution. The ease of implementation and the ability to use NDI control readily for regulating and command following applications make it a very popular control design method in a wide area of applications. However, it lacks the formalism and advantages of optimal control design principles. In this dissertation, we present a novel hybrid technique of nonlinear design that retains the advantages of both SNAC and NDI and, at the same time, makes SNAC extendable to command following applications to achieve near-optimal responses and relates NDI to optimal control design principles. We also present in this dissertation an extended architecture that adapts online to system inversion errors, parameter estimation error and reduced control effectiveness. The versatility of the new technique is demonstrated by considering five nonlinear systems of increasing complexity, including the longitudinal aircraft system.

Download or read book Industrial Control Systems written by Vipin Chandra Pal and published by John Wiley & Sons. This book was released on 2024-04-02 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: INDUSTRIAL CONTROL SYSTEMS This volume serves as a comprehensive guide in the journey of industrial control systems with a multidisciplinary approach to the key engineering problems in the 21st century. The journey of the control system may be viewed from the control of steam engines to spacecraft, aeroplane missile control systems to networked control systems and cybersecurity controls. In terms of industrial control and application, the journey starts from the design of P-I-D controllers to fuzzy controllers, neuro-fuzzy controllers, backstepping controllers, sliding mode controllers, and event-triggered controls for networked control systems. Recently, control theory has spread its golden feathers in different fields of engineering by use of the splendid tool of the control system. In this era, the boom of the Internet of Things is at its maximum pace. Different biomedical applications also come under this umbrella and provide the easiest way to continuous monitoring. One of the prominent research areas of green energy and sustainable development in which control plays a vital role is load frequency controllers, control of solar thermal plants, an event-driven building energy management system, speed-sensorless voltage and frequency control in autonomous DFIG-based wind energy, Hazardous Energy Control Programs, and many more. This exciting new volume: Offers a complete journey through industrial control systems Is written for multidisciplinary students and veteran engineers alike Benefits researchers from diverse disciplines with real-world applications

Download or read book Design Optimization of Active and Passive Structural Control Systems written by Lagaros, Nikos D. and published by IGI Global. This book was released on 2012-08-31 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: A typical engineering task during the development of any system is, among others, to improve its performance in terms of cost and response. Improvements can be achieved either by simply using design rules based on the experience or in an automated way by using optimization methods that lead to optimum designs. Design Optimization of Active and Passive Structural Control Systems includes Earthquake Engineering and Tuned Mass Damper research topics into a volume taking advantage of the connecting link between them, which is optimization. This is a publication addressing the design optimization of active and passive control systems. This title is perfect for engineers, professionals, professors, and students alike, providing cutting edge research and applications.

Download or read book Discrete Time Inverse Optimal Control for Nonlinear Systems written by Edgar N. Sanchez and published by CRC Press. This book was released on 2017-12-19 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discrete-Time Inverse Optimal Control for Nonlinear Systems proposes a novel inverse optimal control scheme for stabilization and trajectory tracking of discrete-time nonlinear systems. This avoids the need to solve the associated Hamilton-Jacobi-Bellman equation and minimizes a cost functional, resulting in a more efficient controller. Design More Efficient Controllers for Stabilization and Trajectory Tracking of Discrete-Time Nonlinear Systems The book presents two approaches for controller synthesis: the first based on passivity theory and the second on a control Lyapunov function (CLF). The synthesized discrete-time optimal controller can be directly implemented in real-time systems. The book also proposes the use of recurrent neural networks to model discrete-time nonlinear systems. Combined with the inverse optimal control approach, such models constitute a powerful tool to deal with uncertainties such as unmodeled dynamics and disturbances. Learn from Simulations and an In-Depth Case Study The authors include a variety of simulations to illustrate the effectiveness of the synthesized controllers for stabilization and trajectory tracking of discrete-time nonlinear systems. An in-depth case study applies the control schemes to glycemic control in patients with type 1 diabetes mellitus, to calculate the adequate insulin delivery rate required to prevent hyperglycemia and hypoglycemia levels. The discrete-time optimal and robust control techniques proposed can be used in a range of industrial applications, from aerospace and energy to biomedical and electromechanical systems. Highlighting optimal and efficient control algorithms, this is a valuable resource for researchers, engineers, and students working in nonlinear system control.

Download or read book Satellite Formation Flying written by S. Mathavaraj and published by Springer Nature. This book was released on 2021-04-16 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small satellite technology is opening up a new era in space exploration offering reduced cost of launch and maintenance, operational flexibility with on-orbit reconfiguration, redundancy etc. The true power of such missions can be harnessed only from close and precise formation flying of satellites. Formation flying missions support diverse application areas such as reconnaissance, remote sensing, solar observatory, deep space observatories, etc. A key component involved in formation flying is the guidance algorithm that should account for system nonlinearities and unknown disturbances. The main focus of this book is to present various nonlinear optimal control and adaptive guidance ideas to ensure precise close formation flying in presence of such difficulties. In addition to in-depth discussion of the relevant topics, MATLAB program files for the results included are also provided for the benefit of the readers. Since this book has concise information about the various guidance techniques, it will be useful reference for researchers and practising engineers in the space field.

Download or read book Advances in Guidance Navigation and Control written by Liang Yan and published by Springer Nature. This book was released on 2021-11-12 with total page 5416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features the latest theoretical results and techniques in the field of guidance, navigation, and control (GNC) of vehicles and aircraft. It covers a range of topics, including, but not limited to, intelligent computing communication and control; new methods of navigation, estimation, and tracking; control of multiple moving objects; manned and autonomous unmanned systems; guidance, navigation, and control of miniature aircraft; and sensor systems for guidance, navigation, and control. Presenting recent advances in the form of illustrations, tables, and text, it also provides detailed information of a number of the studies, to offer readers insights for their own research. In addition, the book addresses fundamental concepts and studies in the development of GNC, making it a valuable resource for both beginners and researchers wanting to further their understanding of guidance, navigation, and control.

Download or read book Study of a Simulation Tool to Determine Achievable Control Dynamics and Control Power Requirements with Perfect Tracking written by Aaron J. Ostroff and published by . This book was released on 1998 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Nonlinear Dynamics written by Walter Lacarbonara and published by Springer Nature. This book was released on 2022-03-01 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third of three volumes includes papers from the second series of NODYCON, which was held virtually in February of 2021. The conference papers reflect a broad coverage of topics in nonlinear dynamics, ranging from traditional topics from established streams of research to those from relatively unexplored and emerging venues of research. These include · Complex dynamics of COVID-19: modeling, prediction and control · Nonlinear phenomena in bio-systems and eco-systems · Energy harvesting · MEMS/NEMS · Multifunctional structures, materials and metamaterials · Nonlinear waves · Chaotic systems, stochasticity, and uncertainty

Download or read book Fault tolerant Flight Control and Guidance Systems written by Guillaume J. J. Ducard and published by Springer Science & Business Media. This book was released on 2009-05-14 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a complete overview of fault-tolerant flight control techniques. Discussion covers the necessary equations for the modeling of small UAVs, a complete system based on extended Kalman filters, and a nonlinear flight control and guidance system.