Download or read book Optimal Design Exploiting 3D Printing and Metamaterials written by Paolo Di Barba and published by Manufacturing. This book was released on 2022-02-26 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the potential for combining recent advances from three fields - metamaterials, automated optimal design and 3D printing. The role of metamaterials in innovative device design is explored, and the development of 3D printing techniques for successfully fabricating new devices from these materials is examined.
Download or read book Design Representations and Processing for Additive Manufacturing written by Marco Attene and published by Springer Nature. This book was released on 2022-06-01 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: The wide diffusion of 3D printing technologies continuously calls for effective solutions for designing and fabricating objects of increasing complexity. The so called "computational fabrication" pipeline comprises all the steps necessary to turn a design idea into a physical object, and this book describes the most recent advancements in the two fundamental phases along this pipeline: design and process planning. We examine recent systems in the computer graphics community that allow us to take a design idea from conception to a digital model, and classify algorithms that are necessary to turn such a digital model into an appropriate sequence of machining instructions.
Download or read book Globally Optimal Design written by Douglass J. Wilde and published by John Wiley & Sons. This book was released on 1978 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good,No Highlights,No Markup,all pages are intact, Slight Shelfwear,may have the corners slightly dented, may have slight color changes/slightly damaged spine.
Download or read book Additive Manufacturing written by Steinar Westhrin Killi and published by . This book was released on 2017 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Additive manufacturing has matured from rapid prototyping through the now popular and "maker"--Oriented 3D printing, recently commercialized and marketed. The terms describing this technology have changed over time, from "rapid prototyping" to "rapid manufacturing" to "additive manufacturing," which reflects largely a focus on technology. This book discusses the uptake, use, and impact of the additive manufacturing and digital fabrication technology. It augments technical and business-oriented trends with those in product design and design studies. It includes a mix of disciplinary and transdisciplinary trends and is rich in case and design material. The chapters cover a range of design-centered views on additive manufacturing that are rarely addressed in the main conferences and publications, which are still mostly, and importantly, concerned with tools, technologies, and technical development. The chapters also reflect dialogues about transdisciplinarity and the inclusion of domains such as business and aesthetics, narrative, and technology critique. This is a great textbook for graduate students of design, engineering, computer science, marketing, and technology and also for those who are not students but are curious about and interested in what 3D printing really can be used for in the near future."--Provided by publisher.
Download or read book Exploiting Advanced Manufacturing Capabilities Topology Optimization in Design Proceedings of a Workshop written by National Academies Of Sciences Engineeri and published by National Academies Press. This book was released on 2022-07-21 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Topology optimization is a digital method for designing objects in order to achieve the best structural performance, sometimes in combination with other physical requirements. Topology optimization tools use mathematical algorithms, such as the finite element method and gradient computation, to generate designs based on desired characteristics and predetermined constraints. Initially a purely academic tool, topology optimization has advanced rapidly and is increasingly being applied to the design of a wide range of products and components, from furniture to spacecraft. To explore the potential and challenges of topology optimization, the National Academies of Sciences, Engineering, and Medicine hosted a two-day workshop on November 19-20, 2019, Exploiting Advanced Manufacturing Capabilities: Topology Optimization in Design. The workshop was organized around three main topics: how topology optimization can incorporate manufacturability along with functional design; challenges and opportunities in combining multiple physical processes; and approaches and opportunities for design of soft and compliant structures and other emerging applications. Speakers identified the unique strengths of topology optimization and explored a wide range of techniques and strengths of topology optimization and explored a wide range of techniques and achievements in the field to date. This publication summarizes the presentations and discussion of the workshop.
Download or read book Additive Manufacturing written by T.S. Srivatsan and published by CRC Press. This book was released on 2015-09-25 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get Ready for the Future of Additive ManufacturingAdditive Manufacturing: Innovations, Advances, and Applications explores the emerging field of additive manufacturing (AM)-the use of 3D printing to make prototype parts on demand. Often referred to as the third industrial revolution, AM offers many advantages over traditional manufacturing. This pr
Download or read book Metamaterials with Negative Parameters written by Ricardo Marqués and published by John Wiley & Sons. This book was released on 2011-09-20 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first general textbook to offer a complete overview of metamaterial theory and its microwave applications Metamaterials with Negative Parameters represents the only unified treatment of metamaterials available in one convenient book. Devoted mainly to metamaterials that can be characterized by a negative effective permittivity and/or permeability, the book includes a wide overview of the most important topics, scientific fundamentals, and technical applications of metamaterials. Chapter coverage includes: the electrodynamics of left-handed media, synthesis of bulk metamaterials, synthesis of metamaterials in planar technology, microwave applications of metamaterial concepts, and advanced and related topics, including SRR- and CSRR-based admittance surfaces, magneto- and electro-inductive waves, and sub-diffraction imaging devices. A list of problems and references is included at the end of each chapter, and a bibliography offers a complete, up-to-daterepresentation of the current state of the art in metamaterials. Geared toward students and professionals alike, Metamaterials with Negative Parameters is an ideal textbook for postgraduate courses and also serves as a valuable introductory reference for scientists and RF/microwave engineers.
Download or read book Metamaterials written by Tie Jun Cui and published by Springer Science & Business Media. This book was released on 2009-10-30 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metamaterials:Theory, Design, and Applications goes beyond left-handed materials (LHM) or negative index materials (NIM) and focuses on recent research activity. Included here is an introduction to optical transformation theory, revealing invisible cloaks, EM concentrators, beam splitters, and new-type antennas, a presentation of general theory on artificial metamaterials composed of periodic structures, coverage of a new rapid design method for inhomogeneous metamaterials, which makes it easier to design a cloak, and new developments including but not limited to experimental verification of invisible cloaks, FDTD simulations of invisible cloaks, the microwave and RF applications of metamaterials, sub-wavelength imaging using anisotropic metamaterials, dynamical metamaterial systems, photonic metamaterials, and magnetic plasmon effects of metamaterials.
Download or read book Electromagnetic and Photonic Simulation for the Beginner Finite Difference Frequency Domain in MATLAB written by Raymond C. Rumpf and published by Artech House. This book was released on 2022-01-31 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book teaches the finite-difference frequency-domain (FDFD) method from the simplest concepts to advanced three-dimensional simulations. It uses plain language and high-quality graphics to help the complete beginner grasp all the concepts quickly and visually. This single resource includes everything needed to simulate a wide variety of different electromagnetic and photonic devices. The book is filled with helpful guidance and computational wisdom that will help the reader easily simulate their own devices and more easily learn and implement other methods in computational electromagnetics. Special techniques in MATLAB® are presented that will allow the reader to write their own FDFD programs. Key concepts in electromagnetics are reviewed so the reader can fully understand the calculations happening in FDFD. A powerful method for implementing the finite-difference method is taught that will enable the reader to solve entirely new differential equations and sets of differential equations in mere minutes. Separate chapters are included that describe how Maxwell’s equations are approximated using finite-differences and how outgoing waves can be absorbed using a perfectly matched layer absorbing boundary. With this background, a chapter describes how to calculate guided modes in waveguides and transmission lines. The effective index method is taught as way to model many three-dimensional devices in just two-dimensions. Another chapter describes how to calculate photonic band diagrams and isofrequency contours to quickly estimate the properties of periodic structures like photonic crystals. Next, a chapter presents how to analyze diffraction gratings and calculate the power coupled into each diffraction order. This book shows that many devices can be simulated in the context of a diffraction grating including guided-mode resonance filters, photonic crystals, polarizers, metamaterials, frequency selective surfaces, and metasurfaces. Plane wave sources, Gaussian beam sources, and guided-mode sources are all described in detail, allowing devices to be simulated in multiple ways. An optical integrated circuit is simulated using the effective index method to build a two-dimensional model of the 3D device and then launch a guided-mode source into the circuit. A chapter is included to describe how the code can be modified to easily perform parameter sweeps, such as plotting reflection and transmission as a function of frequency, wavelength, angle of incidence, or a dimension of the device. The last chapter is advanced and teaches FDFD for three-dimensional devices composed of anisotropic materials. It includes simulations of a crossed grating, a doubly-periodic guided-mode resonance filter, a frequency selective surface, and an invisibility cloak. The chapter also includes a parameter retrieval from a left-handed metamaterial. The book includes all the MATLAB codes and detailed explanations of all programs. This will allow the reader to easily modify the codes to simulate their own ideas and devices. The author has created a website where the MATLAB codes can be downloaded, errata can be seen, and other learning resources can be accessed. This is an ideal book for both an undergraduate elective course as well as a graduate course in computational electromagnetics because it covers the background material so well and includes examples of many different types of devices that will be of interest to a very wide audience.
Download or read book Dynamics of Lattice Materials written by A. Srikantha Phani and published by John Wiley & Sons. This book was released on 2017-09-25 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive introduction to the dynamic response of lattice materials, covering the fundamental theory and applications in engineering practice Offers comprehensive treatment of dynamics of lattice materials and periodic materials in general, including phononic crystals and elastic metamaterials Provides an in depth introduction to elastostatics and elastodynamics of lattice materials Covers advanced topics such as damping, nonlinearity, instability, impact and nanoscale systems Introduces contemporary concepts including pentamodes, local resonance and inertial amplification Includes chapters on fast computation and design optimization tools Topics are introduced using simple systems and generalized to more complex structures with a focus on dispersion characteristics
Download or read book Discrete and Continuum Models for Complex Metamaterials written by Francesco dell'Isola and published by Cambridge University Press. This book was released on 2020-03-12 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explores the relationship between discrete and continuum mechanics as a tool to model new and complex metamaterials. Including a comprehensive bibliography and historical review of the field, and a pedagogical mathematical treatment, it is ideal for graduate students and researchers in mechanical and civil engineering, and materials science.
Download or read book Three Dimensional Microfabrication Using Two Photon Polymerization written by Tommaso Baldacchini and published by William Andrew. This book was released on 2019-10-31 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three-Dimensional Microfabrication Using Two-Photon Polymerization, Second Edition offers a comprehensive guide to TPP microfabrication and a unified description of TPP microfabrication across disciplines. It offers in-depth discussion and analysis of all aspects of TPP, including the necessary background, pros and cons of TPP microfabrication, material selection, equipment, processes and characterization. Current and future applications are covered, along with case studies that illustrate the book's concepts. This new edition includes updated chapters on metrology, synthesis and the characterization of photoinitiators used in TPP, negative- and positive-tone photoresists, and nonlinear optical characterization of polymers. This is an important resource that will be useful for scientists involved in microfabrication, generation of micro- and nano-patterns and micromachining. Discusses the major types of nanomaterials used in the agriculture and forestry sectors, exploring how their properties make them effective for specific applications Explores the design, fabrication, characterization and applications of nanomaterials for new Agri-products Offers an overview of regulatory aspects regarding the use of nanomaterials for agriculture and forestry
Download or read book An Introduction to Structural Optimization written by Peter W. Christensen and published by Springer Science & Business Media. This book was released on 2008-10-20 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has grown out of lectures and courses given at Linköping University, Sweden, over a period of 15 years. It gives an introductory treatment of problems and methods of structural optimization. The three basic classes of geometrical - timization problems of mechanical structures, i. e. , size, shape and topology op- mization, are treated. The focus is on concrete numerical solution methods for d- crete and (?nite element) discretized linear elastic structures. The style is explicit and practical: mathematical proofs are provided when arguments can be kept e- mentary but are otherwise only cited, while implementation details are frequently provided. Moreover, since the text has an emphasis on geometrical design problems, where the design is represented by continuously varying—frequently very many— variables, so-called ?rst order methods are central to the treatment. These methods are based on sensitivity analysis, i. e. , on establishing ?rst order derivatives for - jectives and constraints. The classical ?rst order methods that we emphasize are CONLIN and MMA, which are based on explicit, convex and separable appro- mations. It should be remarked that the classical and frequently used so-called op- mality criteria method is also of this kind. It may also be noted in this context that zero order methods such as response surface methods, surrogate models, neural n- works, genetic algorithms, etc. , essentially apply to different types of problems than the ones treated here and should be presented elsewhere.
Download or read book Compliant Mechanisms written by Nicolae Lobontiu and published by CRC Press. This book was released on 2002-12-27 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexure hinges hold several advantages over classical rotation joints, including no friction losses, no need for lubrication, no hysteresis, compactness, capacity to be utilized in small-scale applications, ease of fabrication, virtually no assembly, and no required maintenance. Compliant Mechanisms: Design of Flexure Hinges provides practical answ
Download or read book Mechanics of Metamaterials with Negative Parameters written by Teik-Cheng Lim and published by Springer Nature. This book was released on 2020-07-23 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses bulk solids that derive their mechanical properties not from those of their base materials, but from their designed microstructures. Focusing on the negative mechanical properties, it addresses topics that reveal the counter-intuitive nature of solids, specifically the negativity of properties that are commonly positive, such as negative bulk modulus, negative compressibility, negative hygroexpansion, negative thermal expansion, negative stiffness phase, and negative Poisson’s ratio. These topics are significant not only due to the curiosity they have sparked, but also because of the possibility of designing materials and structures that can behave in ways that are not normally expected in conventional solids, and as such, of materials that can outperform solids and structures made from conventional materials. The book includes illustrations to facilitate learning, and, where appropriate, reference tables. The presentation is didactic, starting with simple cases, followed by increasingly complex ones. It provides a solid foundation for graduate students, and a valuable resource for practicing materials engineers seeking to develop novel materials through the judicious design of microstructures and their corresponding mechanisms.
Download or read book Topology Optimization written by Martin Philip Bendsoe and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topology optimization method solves the basic enginee- ring problem of distributing a limited amount of material in a design space. The first edition of this book has become the standard text on optimal design which is concerned with the optimization of structural topology, shape and material. This edition, has been substantially revised and updated to reflect progress made in modelling and computational procedures. It also encompasses a comprehensive and unified description of the state-of-the-art of the so-called material distribution method, based on the use of mathematical programming and finite elements. Applications treated include not only structures but also materials and MEMS.
Download or read book Cellular Solids written by Lorna J. Gibson and published by Cambridge University Press. This book was released on 1997 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this new edition of their classic work on Cellular Solids, the authors have brought the book completely up to date, including new work on processing of metallic and ceramic foams and on the mechanical, electrical and acoustic properties of cellular solids. Data for commercially available foams are presented on material property charts; two new case studies show how the charts are used for selection of foams in engineering design. Over 150 references appearing in the literature since the publication of the first edition are cited. The text summarises current understanding of the structure and mechanical behaviour of cellular materials, and the ways in which they can be exploited in engineering design. Cellular solids include engineering honeycombs and foams (which can now be made from polymers, metals, ceramics and composites) as well as natural materials, such as wood, cork and cancellous bone.
