Download or read book Intelligent Robotics and Applications written by Honghai Liu and published by Springer Nature. This book was released on 2022-08-03 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 4-volume set LNAI 13455 - 13458 constitutes the proceedings of the 15th International Conference on Intelligent Robotics and Applications, ICIRA 2022, which took place in Harbin China, during August 2022. The 284 papers included in these proceedings were carefully reviewed and selected from 442 submissions. They were organized in topical sections as follows: Robotics, Mechatronics, Applications, Robotic Machining, Medical Engineering, Soft and Hybrid Robots, Human-robot Collaboration, Machine Intelligence, and Human Robot Interaction.

Download or read book Issues in Computer Programming 2013 Edition written by and published by ScholarlyEditions. This book was released on 2013-05-01 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Computer Programming / 2013 Edition is a ScholarlyEditions™ book that delivers timely, authoritative, and comprehensive information about Computer Simulation. The editors have built Issues in Computer Programming: 2013 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Computer Simulation in this book to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Computer Programming: 2013 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.

Download or read book Engineering Solutions and Technologies in Manufacturing written by Laurentiu Slatineanu and published by Trans Tech Publications Ltd. This book was released on 2014-10-08 with total page 1111 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the Innovative Manufacturing Engineering Conference 2014 (IManE 2014), May 29-30, Chisinau, Republic of Moldova

Download or read book Computer Control Abstracts written by and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sculptured Surface Machining written by Byoung K. Choi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This essential book documents the latest research progress and key issues affecting SSM software development. With a particular focus on the CAD/CAM environment, it provides a rich source of reference and covers a wide range of topics.

Download or read book Manufacturing Automation written by Yusuf Altintas and published by Cambridge University Press. This book was released on 2012-01-16 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal cutting is widely used in producing manufactured products. The technology has advanced considerably along with new materials, computers and sensors. This new edition considers the scientific principles of metal cutting and their practical application to manufacturing problems. It begins with metal cutting mechanics, principles of vibration and experimental modal analysis applied to solving shop floor problems. There is in-depth coverage of chatter vibrations, a problem experienced daily by manufacturing engineers. Programming, design and automation of CNC (computer numerical control) machine tools, NC (numerical control) programming and CAD/CAM technology are discussed. The text also covers the selection of drive actuators, feedback sensors, modelling and control of feed drives, the design of real time trajectory generation and interpolation algorithms and CNC-oriented error analysis in detail. Each chapter includes examples drawn from industry, design projects and homework problems. This is ideal for advanced undergraduate and graduate students and also practising engineers.

Download or read book Twin Control written by Mikel Armendia and published by Springer. This book was released on 2019-01-05 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book summarizes the results of the European research project “Twin-model based virtual manufacturing for machine tool-process simulation and control” (Twin-Control). The first part reviews the applications of ICTs in machine tools and manufacturing, from a scientific and industrial point of view, and introduces the Twin-Control approach, while Part 2 discusses the development of a digital twin of machine tools. The third part addresses the monitoring and data management infrastructure of machines and manufacturing processes and numerous applications of energy monitoring. Part 4 then highlights various features developed in the project by combining the developments covered in Parts 3 and 4 to control the manufacturing processes applying the so-called CPSs. Lastly, Part 5 presents a complete validation of Twin-Control features in two key industrial sectors: aerospace and automotive. The book offers a representative overview of the latest trends in the manufacturing industry, with a focus on machine tools.

Download or read book Analysis of Machining and Machine Tools written by Steven Liang and published by Springer. This book was released on 2015-12-29 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with the fundamental, analytical, and quantitative knowledge of machining process planning and optimization based on advanced and practical understanding of machinery, mechanics, accuracy, dynamics, monitoring techniques, and control strategies that they need to understanding machining and machine tools. It is written for first-year graduate students in mechanical engineering, and is also appropriate for use as a reference book by practicing engineers. It covers topics such as single and multiple point cutting processes; grinding processes; machine tool components, accuracy, and metrology; shear stress in cutting, cutting temperature and thermal analysis, and machine tool chatter. The second section of the book is devoted to “Non-Traditional Machining,” where readers can find chapters on electrical discharge machining, electrochemical machining, laser and electron beam machining, and biomedical machining. Examples of realistic problems that engineers are likely to face in the field are included, along with solutions and explanations that foster a didactic learning experience.

Download or read book MANUFACTURING PROCESSES 4 5 PRODUCT ID 23994334 written by LAMNGEUN. VIRASAK and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metal Machining written by P.R.N. Childs and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal machining is the most widespread metal-shaping process in the mechanical manufacturing industry. World-wide investment in metal machining tools increases year on year - and the wealth of nations can be judged by it. This text - the most up-to-date in the field - provides in-depth discussion of the theory and application of metal machining at an advanced level. It begins with an overview of the development of metal machining and its role in the current industrial environment and continues with a discussion of the theory and practice of machining. The underlying mechanics are analysed in detail and there are extensive chapters examining applications through a discussion of simulation and process control. "Metal Machining: Theory and Applications" is essential reading for senior undergraduates and postgraduates specialising in cutting technology. It is also an invaluable reference tool for professional engineers. Professors Childs, Maekawa, Obikawa and Yamane are four of the leading authorities on metal machining and have worked together for many years.Of interest to all mechanical, manufacturing and materials engineersTheoretical and practical problems addressed

Download or read book Advanced Design and Manufacturing Based on STEP written by Xun Xu and published by Springer Science & Business Media. This book was released on 2009-09-29 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and manufacturing is the essential element in any product development lifecycle. Industry vendors and users have been seeking a common language to be used for the entire product development lifecycle that can describe design, manufacturing and other data pertaining to the product. Many solutions were proposed, the most successful being the Stadndard for Exchange of Product model (STEP). STEP provides a mechanism that is capable of describing product data, independent from any particular system. The nature of this description makes it suitable not only for neutral file exchange, but also as a basis for implementing, sharing and archiving product databases. ISO 10303-AP203 is the first and perhaps the most successful AP developed to exchange design data between different CAD systems. Going from geometric data (as in AP203) to features (as in AP224) represents an important step towards having the right type of data in a STEP-based CAD/CAM system. Of particular significance is the publication of STEP-NC, as an extension of STEP to NC, utilising feature-based concepts for CNC machining purposes. The aim of this book is to provide a snapshot of the recent research outcomes and implementation cases in the field of design and manufacturing where STEP is used as the primary data representation protocol. The 20 chapters are contributed by authors from most of the top research teams in the world. These research teams are based in national research institutes, industries as well as universities.

Download or read book Getting Started with CNC written by Edward Ford and published by Maker Media, Inc.. This book was released on 2016-08-11 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: Getting Started with CNC is the definitive introduction to working with affordable desktop and benchtop CNCs, written by the creator of the popular open hardware CNC, the Shapeoko. Accessible 3D printing introduced the masses to computer-controlled additive fabrication. But the flip side of that is subtractive fabrication: instead of adding material to create a shape like a 3D printer does, a CNC starts with a solid piece of material and takes away from it. Although inexpensive 3D printers can make great things with plastic, a CNC can carve highly durable pieces out of a block of aluminum, wood, and other materials. This book covers the fundamentals of designing for--and working with--affordable ($500-$3000) CNCs.

Download or read book Theory and Design of CNC Systems written by Suk-Hwan Suh and published by Springer Science & Business Media. This book was released on 2008-08-22 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Numerical Control (CNC) controllers are high value-added products counting for over 30% of the price of machine tools. The development of CNC technology depends on the integration of technologies from many different industries, and requires strategic long-term support. “Theory and Design of CNC Systems” covers the elements of control, the design of control systems, and modern open-architecture control systems. Topics covered include Numerical Control Kernel (NCK) design of CNC, Programmable Logic Control (PLC), and the Man-Machine Interface (MMI), as well as the major modules for the development of conversational programming methods. The concepts and primary elements of STEP-NC are also introduced. A collaboration of several authors with considerable experience in CNC development, education, and research, this highly focused textbook on the principles and development technologies of CNC controllers can also be used as a guide for those working on CNC development in industry.

Download or read book Proceedings of the 36th International MATADOR Conference written by Srichand Hinduja and published by Springer Science & Business Media. This book was released on 2010-08-05 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented here are 130 refereed papers given at the 36th MATADOR Conference held at The University of Manchester in July 2010. The MATADOR series of conferences covers the topics of Manufacturing Automation and Systems Technology, Applications, Design, Organisation and Management, and Research. The proceedings of this Conference contain original papers contributed by researchers from many countries on different continents. The papers cover the principles, techniques and applications in aerospace, automotive, biomedical, energy, consumable goods and process industries. The papers in this volume reflect: • the importance of manufacturing to international wealth creation; • the emerging fields of micro- and nano-manufacture; • the increasing trend towards the fabrication of parts using lasers; • the growing demand for precision engineering and part inspection techniques; and • the changing trends in manufacturing within a global environment.

Download or read book Micromachining written by Zdravko Stanimirović and published by BoD – Books on Demand. This book was released on 2019-11-20 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: To present their work in the field of micromachining, researchers from distant parts of the world have joined their efforts and contributed their ideas according to their interest and engagement. Their articles will give you the opportunity to understand the concepts of micromachining of advanced materials. Surface texturing using pico- and femto-second laser micromachining is presented, as well as the silicon-based micromachining process for flexible electronics. You can learn about the CMOS compatible wet bulk micromachining process for MEMS applications and the physical process and plasma parameters in a radio frequency hybrid plasma system for thin-film production with ion assistance. Last but not least, study on the specific coefficient in the micromachining process and multiscale simulation of influence of surface defects on nanoindentation using quasi-continuum method provides us with an insight in modelling and the simulation of micromachining processes. The editors hope that this book will allow both professionals and readers not involved in the immediate field to understand and enjoy the topic.

Download or read book Cold Micro Metal Forming written by Frank Vollertsen and published by Springer Nature. This book was released on 2019-09-13 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book contains the research report of the Collaborative Research Center “Micro Cold Forming” (SFB 747) of the University of Bremen, Germany. The topical research focus lies on new methods and processes for a mastered mass production of micro parts which are smaller than 1mm (by forming in batch size higher than one million). The target audience primarily comprises research experts and practitioners in production engineering, but the book may also be of interest to graduate students alike.

Download or read book Differential Geometry written by Erwin Kreyszig and published by Courier Corporation. This book was released on 2013-04-26 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introductory textbook on the differential geometry of curves and surfaces in 3-dimensional Euclidean space, presented in its simplest, most essential form. With problems and solutions. Includes 99 illustrations.