Download or read book Optimization Based Clearance of Flight Control Laws written by Andreas Varga and published by Springer. This book was released on 2011-11-23 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the main achievements of the EC funded 6th Framework Program project COFCLUO – Clearance of Flight Control Laws Using Optimization. This project successfully contributed to the achievement of a top-level objective to meet society’s needs for a more efficient, safer and environmentally friendly air transport by providing new techniques and tools for the clearance of flight control laws. This is an important part of the certification and qualification process of an aircraft – a costly and time-consuming process for the aeronautical industry. The overall objective of the COFCLUO project was to develop and apply optimization techniques to the clearance of flight control laws in order to improve efficiency and reliability. In the book, the new techniques are explained and benchmarked against traditional techniques currently used by the industry. The new techniques build on mathematical criteria derived from the certification and qualification requirements together with suitable models of the aircraft. The development of these criteria and models are also presented in the book. Because of wider applicability, the optimization-based clearance of flight control laws will open up the possibility to design innovative aircraft that today are out of the scope using classical clearance tools. Optimization-based clearance will not only increase safety but it will also simplify the whole certification and qualification process, thus significantly reduce cost. The achieved speedup will also support rapid modeling and prototyping and reduce “time to market”.
Download or read book Advances in Aerospace Guidance Navigation and Control written by Bogusław Dołęga and published by Springer. This book was released on 2017-12-15 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first three CEAS (Counsil of European Aerospace Societies) Specialist Conferences on Guidance, Navigation and Control (CEAS EuroGNC) were held in Munich, Germany in 2011, in Delft, Netherlands in 2013 and in Toulouse, France in 2017. The Warsaw University of Technology (WUT) and the Rzeszow University of Technology (RzUT) accepted the challenge of jointly organizing the 4th edition. The conference aims to promote scientific and technical excellence in the fields of Guidance, Navigation and Control (GNC) in aerospace and other fields of technology. The Conference joins together the industry with the academia research. This book covers four main topics: Guidance and Control, Control Theory Application, Navigation, UAV Control and Dynamic. The papers included focus on the most advanced and actual topics in guidance, navigation and control research areas: · Control theory, analysis, and design · ; Novel navigation, estimation, and tracking methods · Aircraft, spacecraft, missile and UAV guidance, navigation, and control · Flight testing and experimental results · Intelligent control in aerospace applications · Aerospace robotics and unmanned/autonomous systems · Sensor systems for guidance, navigation and control · Guidance, navigation, and control concepts in air traffic control systems For the 4th CEAS Specialist Conference on Guidance, Navigation and Control the International Technical Committee established a formal review process. Each paper was reviewed in compliance with good journal practices by independent and anonymous reviewers. At the end of the review process papers were selected for publication in this book.
Download or read book Air Traffic Management and Systems III written by Electronic Navigation Research Institute and published by Springer. This book was released on 2019-06-21 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings provides novel concepts and techniques for air traffic management (ATM) and communications, navigation, and surveillance (CNS) systems. The volume consists of selected papers from the 5th ENRI International Workshop on ATM/CNS (EIWAC2017) held in Tokyo in November 2017, the theme of which was “Drafting Future Skies”. Included are key topics to realize safer and more efficient skies in the future, linked to the integrated conference theme consisting of long-term visions based on presentations from various fields. The proceedings is dedicated not only to researchers, academicians, and university students, but also to engineers in the industry, air navigation service providers (ANSPs), and regulators of aviation.
Download or read book Modeling and Control for a Blended Wing Body Aircraft written by Martin Kozek and published by Springer. This book was released on 2014-10-27 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book demonstrates the potential of the blended wing body (BWB) concept for significant improvement in both fuel efficiency and noise reduction and addresses the considerable challenges raised for control engineers because of characteristics like open-loop instability, large flexible structure, and slow control surfaces. This text describes state-of-the-art and novel modeling and control design approaches for the BWB aircraft under consideration. The expert contributors demonstrate how exceptional robust control performance can be achieved despite such stringent design constraints as guaranteed handling qualities, reduced vibration, and the minimization of the aircraft’s structural loads during maneuvers and caused by turbulence. As a result, this innovative approach allows the building of even lighter aircraft structures, and thus results in considerable efficiency improvements per passenger kilometer. The treatment of this large, complex, parameter-dependent industrial control problem highlights relevant design issues and provides a relevant case study for modeling and control engineers in many adjacent disciplines and applications. Modeling and Control for a Blended Wing Body Aircraft presents research results in numeric modeling and control design for a large, flexible, civil BWB aircraft in the pre-design stage as developed within the EU FP7 research project ACFA 2020. It is a useful resource for aerospace and control engineers as it shows the complete BWB aircraft modeling and control design process, carried out with the most recent tools and techniques available. presents research results in numeric modeling and control design for a large, flexible, civil BWB aircraft in the pre-design stage as developed within the EU FP7 research project ACFA 2020. It is a useful resource for aerospace and control engineers as it shows the complete BWB aircraft modeling and control design process, carried out with the most recent tools and techniques available. Advances in Industrial Control aims to report and encourage the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.
Download or read book Advances in Fuzzy Logic Systems written by Elmer Dadios and published by BoD – Books on Demand. This book was released on 2023-12-20 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuzzy logic systems have been a hot topic in the scientific and academic community for more than half a century. The idea of making machines behave and make decisions like humans do is astounding. The development and implementation of fuzzy logic systems can be seen in various real physical applications in daily human life. The methods employed using fuzzy logic have resulted in innovative technologies. This book provides insights into understanding the principles and concepts behind the advances of fuzzy logic systems. It presents ideas concerning fuzzy logic systems and their technological applications. The book is arranged into two sections on theories and foundations of fuzzy logic systems and implementations of fuzzy logic systems in service to the community.
Download or read book Optimal Control written by Frank L. Lewis and published by John Wiley & Sons. This book was released on 2012-02-01 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: A NEW EDITION OF THE CLASSIC TEXT ON OPTIMAL CONTROL THEORY As a superb introductory text and an indispensable reference, this new edition of Optimal Control will serve the needs of both the professional engineer and the advanced student in mechanical, electrical, and aerospace engineering. Its coverage encompasses all the fundamental topics as well as the major changes that have occurred in recent years. An abundance of computer simulations using MATLAB and relevant Toolboxes is included to give the reader the actual experience of applying the theory to real-world situations. Major topics covered include: Static Optimization Optimal Control of Discrete-Time Systems Optimal Control of Continuous-Time Systems The Tracking Problem and Other LQR Extensions Final-Time-Free and Constrained Input Control Dynamic Programming Optimal Control for Polynomial Systems Output Feedback and Structured Control Robustness and Multivariable Frequency-Domain Techniques Differential Games Reinforcement Learning and Optimal Adaptive Control
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technical Information Indexes written by United States. Naval Air Systems Command and published by . This book was released on 1974 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Perturbation Compensator based Robust Tracking Control and State Estimation of Mechanical Systems written by SangJoo Kwon and published by Springer Science & Business Media. This book was released on 2004-07-07 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph investigates a practical way to achieve robust motion control and state estimation (Kalman filtering) of mechanical systems, which is a promising approach in terms of the perturbation compensator. The book presents novel approaches for design and analysis of perturbation observers as well as an extension to robust motion control and robust state estimation. The book is written in a self-contained manner including experimental results in each chapter clearly validating the developed theories.
Download or read book Robust Flight Control written by Jean-Francois Magni and published by Springer. This book was released on 1997-03-07 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: In October 1994, 22 organisations throughout Europe accepted a challenge to solve a specific robust flight control design problem. The results of that design challenge, presented at the GARTEUR Specialists' Workshop in Toulouse, France in April 1997, are reported here. Two flight control benchmarks are considered, based on the automatic landing phase of a large cargo aircraft and on the control of a military aircraft. Methods applied include: classical control; multi-objective optimisation; eigenstructure assignment; modal multi-model approach; LQ, Lyapunov and H¿-techniques; ¿-synthesis; nonlinear dynamic inversion; robust inverse dynamics estimation; model predictive control and following; and fuzzy control. Involved in the definition of the benchmarks and the evaluation process have been representatives from the European aeronautical industry, bringing a strong link with flight control law design practice.
Download or read book Cultural Algorithms written by Shahin Jalili and published by Springer Nature. This book was released on 2022-11-24 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the latest advances in Cultural Algorithms, their general framework, different variants, hybridized versions with other meta-heuristic and search techniques, and their applications. Cultural Algorithms are meta-heuristic numerical optimization techniques inspired by the bio-cultural evolutionary theory, in which both types of vertical and horizontal learning behaviors are modeled. The book includes well-briefed basics of optimization and theoretical backgrounds of Cultural Algorithms in its initial chapters and then discusses their applications in different branches of science and engineering. It provides detailed mathematical formulations and algorithmic pseudo-codes of hybridized, extended, and multi-population variants of cultural algorithms. The book will serve the research students, fellows, professors, and industry professionals to implement real-time applications of Cultural Algorithms.
Download or read book Aeronautical Engineering written by and published by . This book was released on 1971 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: A selection of annotated references to unclassified reports and journal articles that were introduced into the NASA scientific and technical information system and announced in Scientific and technical aerospace reports (STAR) and International aerospace abstracts (IAA)
Download or read book Optimal Sensor Networks Scheduling in Identification of Distributed Parameter Systems written by Maciej Patan and published by Springer. This book was released on 2012-02-23 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sensor networks have recently come into prominence because they hold the potential to revolutionize a wide spectrum of both civilian and military applications. An ingenious characteristic of sensor networks is the distributed nature of data acquisition. Therefore they seem to be ideally prepared for the task of monitoring processes with spatio-temporal dynamics which constitute one of most general and important classes of systems in modelling of the real-world phenomena. It is clear that careful deployment and activation of sensor nodes are critical for collecting the most valuable information from the observed environment. Optimal Sensor Network Scheduling in Identification of Distributed Parameter Systems discusses the characteristic features of the sensor scheduling problem, analyzes classical and recent approaches, and proposes a wide range of original solutions, especially dedicated for networks with mobile and scanning nodes. Both researchers and practitioners will find the case studies, the proposed algorithms, and the numerical examples to be invaluable.
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 38 (thesis year 1993) a total of 13,787 thesis titles from 22 Canadian and 164 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 38 reports theses submitted in 1993, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.
Download or read book Geometric and Numerical Foundations of Movements written by Jean-Paul Laumond and published by Springer. This book was released on 2017-05-02 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims at gathering roboticists, control theorists, neuroscientists, and mathematicians, in order to promote a multidisciplinary research on movement analysis. It follows the workshop “ Geometric and Numerical Foundations of Movements ” held at LAAS-CNRS in Toulouse in November 2015[1]. Its objective is to lay the foundations for a mutual understanding that is essential for synergetic development in motion research. In particular, the book promotes applications to robotics --and control in general-- of new optimization techniques based on recent results from real algebraic geometry.
Download or read book Mathematical Reviews written by and published by . This book was released on 2008 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flight Control Systems written by Roger Pratt and published by IET. This book was released on 2000 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Bridging the gap between academic research and real-world applications, this reference on modern flight control methods for fixed-wing aircraft deals with fundamentals of flight control systems design, then concentrates on applications based on the modern control methods used in the latest aircraft. The book is written for practicing engineers who are new to the aviation industry, postgraduate students in strategic or applied research, and advanced undergraduates. Some knowledge of classical control is assumed. Pratt is a member of IEEE and is UK Member for AIAA's Technical Committee on Guidance, Navigation and Control. Annotation c. Book News, Inc., Portland, OR (booknews.com)
