Download or read book Optics for Technology Students written by Robert O. Naess and published by Prentice Hall. This book was released on 2001 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: For courses in Electrical Technology, Fiber Optics, and Fiber Optic Communications. This comprehensive introduction for the pre-calculus student presents the fundamentals of optics for those with little or no prior training in the subject. The book's accessible format requires a foundation in only algebra and geometry and presents the applications and physics of optics principles as geometrical optics and the wave motion for light.

Download or read book Harnessing Light written by National Research Council and published by National Academies Press. This book was released on 1998-09-25 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical science and engineering affect almost every aspect of our lives. Millions of miles of optical fiber carry voice and data signals around the world. Lasers are used in surgery of the retina, kidneys, and heart. New high-efficiency light sources promise dramatic reductions in electricity consumption. Night-vision equipment and satellite surveillance are changing how wars are fought. Industry uses optical methods in everything from the production of computer chips to the construction of tunnels. Harnessing Light surveys this multitude of applications, as well as the status of the optics industry and of research and education in optics, and identifies actions that could enhance the field's contributions to society and facilitate its continued technical development.

Download or read book Optical Engineering Science written by Stephen Rolt and published by John Wiley & Sons. This book was released on 2020-01-07 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide for engineers and students that covers a wide range of optical design and optical metrology topics Optical Engineering Science offers a comprehensive and authoritative review of the science of optical engineering. The book bridges the gap between the basic theoretical principles of classical optics and the practical application of optics in the commercial world. Written by a noted expert in the field, the book examines a range of practical topics that are related to optical design, optical metrology and manufacturing. The book fills a void in the literature by coving all three topics in a single volume. Optical engineering science is at the foundation of the design of commercial optical systems, such as mobile phone cameras and digital cameras as well as highly sophisticated instruments for commercial and research applications. It spans the design, manufacture and testing of space or aerospace instrumentation to the optical sensor technology for environmental monitoring. Optics engineering science has a wide variety of applications, both commercial and research. This important book: Offers a comprehensive review of the topic of optical engineering Covers topics such as optical fibers, waveguides, aspheric surfaces, Zernike polynomials, polarisation, birefringence and more Targets engineering professionals and students Filled with illustrative examples and mathematical equations Written for professional practitioners, optical engineers, optical designers, optical systems engineers and students, Optical Engineering Science offers an authoritative guide that covers the broad range of optical design and optical metrology topics and their applications.

Download or read book Optics Experiments and Demonstrations for Student Laboratories written by PROFESSOR STEPHEN G. LIPSON and published by Institute of Physics Publishing. This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive guide to a wide range of optical experiments. Topics covered include classical geometrical and physical optics, polarization, scattering and diffraction, imaging, interference, wave propagation, optical properties of materials, and atmospheric and relativistic optics. There are a few selected suggestions on lasers and quantum optics. The book is an essential practical guide for optics students and their mentors at undergraduate and postgraduate levels. The experiments described are based on the author's experience during many years of laboratory teaching in several universities and colleges and the emphasis is on setups which use equipment that is commonly available in student labs, with minimal dependence on special samples or instruments. A basic background in physics and optics is assumed, but commonly encountered problems and mistakes are discussed. There are several appendices describing specialized points which are difficult to locate in the literature, and advice is provided about computer simulations which accompany some of the experiments. Key Features Describes experiments in a wide range of optical topics, which an advanced undergraduate student will be acquainted with Emphasizes how to carry out the experiments in a student laboratory, without the need for specialized equipment

Download or read book Optical Principles and Technology for Engineers written by James Stewart and published by CRC Press. This book was released on 1996-04-23 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discussing the principles of physical and geometrical optics from an engineering point of view, this book explains current optical technology and the applications of optical methods in a wide variety of fields, from astronomy and agriculture to medicine and semiconductors. It offers guidance in the selection of optical components for the construction of bread-board models using commercially available, standard components, and provides immediately useful equations without unnecessary mathematical derivations.

Download or read book Optics Photonics and Laser Technology written by Paulo A. Ribeiro and published by Springer. This book was released on 2018-10-13 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers key theoretical and practical aspects of optics, photonics and lasers. It addresses optical instrumentation and metrology, photonic and optoelectronic materials and devices, nanophotonics, organic and bio-photonics and high-field phenomena. Researchers, engineers, students and practitioners interested in any of these fields will find a wealth of new methods, technologies, advanced prototypes, systems, tools and techniques, as well as general surveys outlining future directions.

Download or read book Introduction to Modern Optics for Students in Engineering and Applied Science written by Stephen Arnold and published by . This book was released on 2018-08-21 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: The following is a text taught to engineering and applied science students at the NYU Tandon (Polytechnic) School of Engineering in 2017 and 2018. The course met for four hours a week during one fourteen week semester. Unlike other texts in Modern Optics this text is intended to be used by students in both engineering and applied science at a junior or senior level, and to support specialized interdisciplinary applied optics courses given at a graduate level, such as Bio-Optics. By introducing it in the junior year students with interest arrive fresh from their introductory physics courses. The course emphasizes fundamentals starting with Maxwell's equations, which is where the introductory physics sequence ends, and applies these fundamentals to current interests in applied science and technology. Appropriate to the level of the course, the mathematics represents Maxwell's Equations in their integral form. Where advanced math was added (e.g. Fourier Transform), the students were introduced to this as if taught in an applied math course.Take-home Experiments: There are also take-home laboratory experiment assignments dispersed within the text, and requiring a small inventory of parts (e.g. transmission diffraction grating, red laser pointer, aspheric lens, 1" diameter acrylic sphere, and dye solution). With these parts and common things found around a typical home, 9 experiments are assigned to support the concepts taught in the course. One of these involves turning a Smart phone into a microscope. Another turns a Smart phone into a spectrometer, and a third uses the phone as a photometer.Applications: Some of the many applications discussed are Optical Tweezers, Holographic Diffraction Grating, Demystifying the structure of DNA from Rosalind Franklin's X-ray diffraction image (Photo 51), Fourier Transform Infrared Spectroscopy (FTIR), nano-plasmonics, Fabry-Perot resonator, Whispering Gallery Mode sensor, LASER, Confocal microscope, and Super high-resolution microscopy (STED).

Download or read book Integrated Optics Theory and Technology written by Robert G. Hunsperger and published by Springer. This book was released on 2013-11-11 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Our intent in producing this book was to provide a text that would be comprehensive enough for an introductory course in integrated optics, yet concise enough in its mathematical derivations to be easily readable by a practicing engineer who desires an overview of the field. The response to the first edition has indeed been gratifying; unusually strong demand has caused it to be sold out during the initial year of publication, thus providing us with an early opportunity to produce this updated and improved second edition. This development is fortunate, because integrated optics is a very rapidly progressing field, with significant new research being regularly reported. Hence, a new chapter (Chap. 17) has been added to review recent progress and to provide numerous additional references to the relevant technical literature. Also, thirty-five new problems for practice have been included to supplement those at the ends of chapters in the first edition. Chapters I through 16 are essentially unchanged, except for brief updating revisions and corrections of typographical errors. Because of the time limitations imposed by the need to provide an uninterrupted supply of this book to those using it as a course text, it has been possible to include new references and to briefly describe recent developments only in Chapter 17. However, we hope to provide details of this continuing progress in a future edition.

Download or read book Applied Optics Fundamentals and Device Applications written by Mark A. Mentzer and published by CRC Press. This book was released on 2017-12-19 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: How does the field of optical engineering impact biotechnology? Perhaps for the first time, Applied Optics Fundamentals and Device Applications: Nano, MOEMS, and Biotechnology answers that question directly by integrating coverage of the many disciplines and applications involved in optical engineering, and then examining their applications in nanobiotechnology. Written by a senior U.S. Army research scientist and pioneer in the field of optical engineering, this book addresses the exponential growth in materials, applications, and cross-functional relevance of the many convergent disciplines making optical engineering possible, including nanotechnology, MEMS, (MOEMS), and biotechnology. Integrates Coverage of MOEMS, Optics, and Nanobiotechnology—and Their Market Applications Providing an unprecedented interdisciplinary perspective of optics technology, this book describes everything from core principles and fundamental relationships, to emerging technologies and practical application of devices and systems—including fiber-optic sensors, integrated and electro-optics, and specialized military applications. The author places special emphasis on: Fiber sensor systems Electro-optics and acousto-optics Optical computing and signal processing Optical device performance Thin film magnetic memory MEMS, MOEMS, nano- and bionanotechnologies Optical diagnostics and imaging Integrated optics Design constraints for materials, manufacturing, and application space Bridging the technology gaps between interrelated fields, this reference is a powerful tool for students, engineers and scientists in the electrical, chemical, mechanical, biological, aerospace, materials, and optics fields. Its value also extends to applied physicists and professionals interested in the relationships between emerging technologies and cross-disciplinary opportunities. Author Mark A. Mentzer is a pioneer in the field of optical engineering. He is a senior research scientist at the U.S. Army Research Laboratory in Maryland. Much of his current work involves extending the fields of optical engineering and solid state physics into the realm of biochemistry and molecular biology, as well as structured research in biophotonics.

Download or read book Optical Fiber Technology and Applications Recent Advances written by Mario F. S. Ferreira and published by IOP Publishing Limited. This book was released on 2021-08-11 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical Fiber Technology and Applications: Recent Advances, comprised of 10 chapters written by leading experts in the field, documents the cutting-edge work of new material composition and waveguide design-based specialty optical fibers and their photonic devices. Highlighting the most recent progress and trends in optical fiber technology, this book covers important topics such as specialty optical fibers, optical amplifiers, radiation dosimetry, borosilicate glass, radiation effect, fiber optic temperature sensors, pulsed fiber laser, non-linear fiber optics, solitons, supercontinuum generation, and fiber-optic-based 5G networks. Solely devoted to the most recent achievements in the development of different varieties of specialty optical fibers, this book serves as a universal resource for future development in the field while providing students, researchers, and technology managers with valuable, timely, and unbiased information on the subject. Key Features Up-to-date overview of optical fiber materials and their wide applications. Broad scope with insights from experts in the field. Serves as a universal resource for future development in the field while providing students, researchers, and technology managers with valuable, timely, and unbiased information on the subject.

Download or read book Polarized Light and Optical Systems written by Russell Chipman and published by CRC Press. This book was released on 2018-07-16 with total page 1037 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polarized Light and Optical Systems presents polarization optics for undergraduate and graduate students in a way which makes classroom teaching relevant to current issues in optical engineering. This curriculum has been developed and refined for a decade and a half at the University of Arizona’s College of Optical Sciences. Polarized Light and Optical Systems provides a reference for the optical engineer and optical designer in issues related to building polarimeters, designing displays, and polarization critical optical systems. The central theme of Polarized Light and Optical Systems is a unifying treatment of polarization elements as optical elements and optical elements as polarization elements. Key Features Comprehensive presentation of Jones calculus and Mueller calculus with tables and derivations of the Jones and Mueller matrices for polarization elements and polarization effects Classroom-appropriate presentations of polarization of birefringent materials, thin films, stress birefringence, crystal polarizers, liquid crystals, and gratings Discussion of the many forms of polarimeters, their trade-offs, data reduction methods, and polarization artifacts Exposition of the polarization ray tracing calculus to integrate polarization with ray tracing Explanation of the sources of polarization aberrations in optical systems and the functional forms of these polarization aberrations Problem sets to build students’ problem-solving capabilities.

Download or read book Guided Wave Optical Components and Devices written by Bishnu P. Pal and published by Academic Press. This book was released on 2010-07-19 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guided Wave Optical Components and Devices provides a comprehensive, lucid, and clear introduction to the world of guided wave optical components and devices. Bishnu Pal has collaborated with some of the greatest minds in optics to create a truly inclusive treatise on this contemporary topic. Written by leaders in the field, this book delivers cutting-edge research and essential information for professionals, researchers, and students on emerging topics like microstructured fibers, broadband fibers, polymer fiber components and waveguides, acousto-optic interactions in fibers, higher order mode fibers, nonlinear and parametric process in fibers, revolutionary effects of erbium doped and Raman fiber amplifiers in DWDM and CATV networks, all-fiber network branching component technology platforms like fused fiber couplers, fiber gratings, and side-polished fiber half-couplers, arrayed waveguides, optical MEMS, fiber sensing technologies including safety, civil structural health monitoring, and gyroscope applications. - Accessible introduction to wide range of topics relating to established and emerging optical components - Single-source reference for graduate students in optical engineering and newcomer practitioners, focused on components - Extensive bibliographical information included so readers can get a broad introduction to a variety of optical components and their applications in an optical network

Download or read book Optics Manufacturing written by Christoph Gerhard and published by CRC Press. This book was released on 2017-12-14 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical components are essential key elements in modern engineering and everyday life. The education of skilled personnel and specialists in the fields of theoretical and practical optics manufacturing is of essential importance for next-generation technologies. Against this background, this book provides the basis for the education and advanced training of precision and ophthalmic optics technicians, craftsmen, and foremen, and it is an extensive reference work for students, academics, optical designers or shop managers, and production engineers. It not only covers particularly used and applied machines, working materials, testing procedures, and machining steps for classical optics manufacturing, but it also addresses the production and specification of optical glasses as well as unconventional production techniques and novel approaches. Optics Manufacturing: Components and Systems furthermore covers the basics of light propagation and provides an overview on optical materials and components; presents an introduction and explanation of the necessary considerations and procedures for the initial definition of manufacturing tolerances and the relevant industrial standards for optics manufacturing; and addresses the production of micro optics, the assembly of opto-mechanical setups and possible manufacturing errors, and the impact of the resulting inaccuracies. In order to allow fast and clear access to the most essential information, each chapter ends with a short summary of the most important aspects, including an explanation of relevant equations, symbols, and abbreviations. For further reading, extensive lists of references are also provided. Finally, exercises on the covered basic principles of optics, approaches, and techniques of optics manufacturing—including their corresponding detailed solutions—are found in the appendix.

Download or read book Introduction to Modern Optics written by Grant R. Fowles and published by Courier Corporation. This book was released on 2012-04-25 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete basic undergraduate course in modern optics for students in physics, technology, and engineering. The first half deals with classical physical optics; the second, quantum nature of light. Solutions.

Download or read book Introduction to Information Optics written by Francis T.S. Yu and published by Elsevier. This book was released on 2001-09-12 with total page 749 pages. Available in PDF, EPUB and Kindle. Book excerpt: While there are books treating individual topics contained in this book, this will be the first single volume providing a cohesive treatment on this subject as a whole. This goes beyond optical communications in that it includes related topics such as sensing, displays, computing, and data storage.

Download or read book Materials Science and Technology of Optical Fabrication written by Tayyab I. Suratwala and published by John Wiley & Sons. This book was released on 2018-10-16 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the fundamental science of grinding and polishing by examining the chemical and mechanical interactions over many scale lengths Manufacturing next generation optics has been, and will continue to be, enablers for enhancing the performance of advanced laser, imaging, and spectroscopy systems. This book reexamines the age-old field of optical fabrication from a materials-science perspective, specifically the multiple, complex interactions between the workpiece (optic), slurry, and lap. It also describes novel characterization and fabrication techniques to improve and better understand the optical fabrication process, ultimately leading to higher quality optics with higher yield. Materials Science and Technology of Optical Fabrication is divided into two major parts. The first part describes the phenomena and corresponding process parameters affecting both the grinding and polishing processes during optical fabrication. It then relates them to the critical resulting properties of the optic (surface quality, surface figure, surface roughness, and material removal rate). The second part of the book covers a number of related topics including: developed forensic tools used to increase yield of optics with respect to surface quality (scratch/dig) and fracture loss; novel characterization and fabrication techniques used to understand/quantify the fundamental phenomena described in the first part of the book; novel and recent optical fabrication processes and their connection with the fundamental interactions; and finally, special techniques utilized to fabricate optics with high damage resistance. Focuses on the fundamentals of grinding and polishing, from a materials science viewpoint, by studying the chemical and mechanical interactions/phenomena over many scale lengths between the workpiece, slurry, and lap Explains how these phenomena affect the major characteristics of the optic workpiece—namely surface figure, surface quality, surface roughness, and material removal rate Describes methods to improve the major characteristics of the workpiece as well as improve process yield, such as through fractography and scratch forensics Covers novel characterization and fabrication techniques used to understand and quantify the fundamental phenomena of various aspects of the workpiece or fabrication process Details novel and recent optical fabrication processes and their connection with the fundamental interactions Materials Science and Technology of Optical Fabrication is an excellent guidebook for process engineers, fabrication engineers, manufacturing engineers, optical scientists, and opticians in the optical fabrication industry. It will also be helpful for students studying material science and applied optics/photonics.

Download or read book Unified Optical Scanning Technology written by Leo Beiser and published by John Wiley & Sons. This book was released on 2005-02-25 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an award-winning leader in the field, this is a thoroughly integrated overview of the many facets and disciplines of optical scanning. Of particular utility to both practitioner and student are such features as: An overview of the technology and unifying principles, including active and passive scanning, optical transfer, and system architecture In-depth chapters on scanning theory and processes, scanned resolution, scanner devices and techniques, and the control of scanner beam misplacemen A comprehensive review of the government-sponsored research of agile beam steering, now primed for commercial adaptation A unique focus on the Lagrange invariant and its revealing resolution invariant