Download or read book Optical Specification Fabrication and Testing written by Jim Schwiegerling and published by . This book was released on 2014 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book connects the dots between geometrical optics, interference and diffraction, and aberrations to illustrate the development of an optical system. It focuses on initial layout, design and aberration analysis, fabrication, and, finally, testing and verification of the individual components and the system performance. It also covers more specialized topics such as fitting Zernike polynomials, representing aspheric surfaces with the Forbes Q polynomials, and testing with the Shack-Hartmann wavefront sensor. These topics are discussed in more detail than is found in other textbooks, and the techniques are developed to the point where readers can pursue their own analyses or modify to their particular situations.
Download or read book The Art and Science of Optical Design written by Robert R. Shannon and published by Cambridge University Press. This book was released on 1997-06-13 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Art and Science of Optical Design is a comprehensive introduction to lens design, covering the fundamental physical principles and key engineering issues. Several practical examples of modern computer-aided lens design are worked out in detail from start to finish. The basic theory and results of optics are presented early on in the book, along with a discussion of optical materials. Aberrations, and their correction, and image analysis are then covered in great detail. Subsequent chapters deal with design optimisation and tolerance analysis. Several design examples are then given, beginning with basic lens design forms, and progressing to advanced systems, such as gradient index and diffractive optical components. In covering all aspects of optical design, including the use of modern lens design software, this book will be invaluable to students of optical engineering as well as to anyone engaged in optical design at any stage.
Download or read book Fiber Optics Standards written by IGIC, Inc. Staff and published by Information Gatekeepers Inc. This book was released on 1994 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optical Networking Standards A Comprehensive Guide for Professionals written by Khurram Kazi and published by Springer Science & Business Media. This book was released on 2007-04-13 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes recently approved adopted and implemented standards for versatile switches, routers and multi-service provisioning platforms. Numerous illustrative examples showing actual situations or cases implemented. Covers the activities of all the major optical networking standards bodies and forums (ITU-T, IETF, MEF, and OIF).
Download or read book The ComSoc Guide to Passive Optical Networks written by Stephen B. Weinstein and published by John Wiley & Sons. This book was released on 2012-03-20 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the major architectures, standards, and technologies of Passive Optical Networks (PONs) The ComSoc Guide to Passive Optical Networks provides readers with a concise explanation of the key features of Passive Optical Networks (PONs); the different types of PON architectures and standards; key issues of PON devices, management, and implementation; and the promising business opportunities in access networks. Written for a broad audience, ranging from developers to users, this indispensable book provides an understanding o the evolutionary path of PON access systems and their positioning with respect to the cable, copper, and wireless competitors for broadband access networks. In addition, The ComSoc Guide to Passive Optical Networks: Provides brief, high-level overviews of the architectures and applications of Fiber-to-the-Home (FTTH) or Fiber-to-the-Curb (FTTC) access networks and the alternative HFC, subscriber line, and WiMAX access systems Awards readers with a clear understanding of what BPON, GPON, WDM-PON and EPON are and how they work, together with an introduction to their respective standards Carefully defines all acronyms and technical terms, making the book accessible to those who may not be specialists in this area Gives readers an appreciation of the last mile problems in telecommunications access networks, and the opportunities in optical-wireless integration
Download or read book The Optical Communications Reference written by Casimer DeCusatis and published by Academic Press. This book was released on 2009-12-03 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extracting key information from Academic Press's range of prestigious titles in optical communications, this reference gives the R&D optical fiber communications engineer a quick and easy-to-grasp understanding of the current state of the art in optical communications technology, together with some of the underlying theory, covering a broad of topics: optical waveguides, optical fibers, optical transmitters and receivers, fiber optic data communication, optical networks, and optical theory. With this reference, the engineer will be up-to-speed on the latest developments in no-time. Provides an overview of current state-of-the-art in optical communications technology, enabling the reader to get up to speed with the latest technological developments and establish their value for product development Brings together material from a number of authoritative sources, giving both breadth and depth of content and providing a single source of key knowledge and information which saves time in seeking information from scattered sources Explores latest technologies and their implementation, allowing the engineer to compare and contrast approaches and solutions Provides just enough introductory material for readers to grasp the underpinning physics, giving the engineer an accessible introduction to the underlying theory for a proper understanding
Download or read book Optical Specifications written by Warren J. Smith and published by . This book was released on 1983 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Trends in Optical Fibre Metrology and Standards written by Olivério D.D. Soares and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fibre Optics has gained prominence in: telecommunications, data transmission and distribution, cable television networks, sensing and control, light probing and instrumentation. The 1990's shows an increased expansion of optical fibre networks which respond to the rapid growth on a world scale of long distance trunk lines combined with a family of emerging optical based services in which fibre-to-the-home will have the greatest impact. There is already evidence that optical communications are moving toward higher bit-rates, wavelength transparency and irrelevance of signal formats. The rate of change in fibre optics and the emergence of new services will be a mere consequence of economics. The actual increasing of cost and the demand for high-date-rates or large bandwidth per transmission channels, and the lack of available space in the congested conduits in urban areas, strongly favour the technological change to fibre optics. The recognised advantages of fibre optic technologies and the unchallenged potential to respond to future needs requires the inclusion of fibre optics networking into new installations. Concomitantly, current progress in the field of optical fibres (optical fibre amplifiers, optical fibre switching, WDM, fibre gratings, etc.) unfold major technical advances and greater flexibility in the designs and engineering of networks, optical fibre components and instrumentation. The explosion of growth in fibre sensors, fibre probes and the myriad of fibre based components shows that we are only using a fraction of optical fibre potential.
Download or read book Handbook of Optical Engineering written by Daniel Malacara and published by CRC Press. This book was released on 2001-05-31 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook explains principles, processes, methods, and procedures of optical engineering in a concise and practical way. It emphasizes fundamental approaches and provides useful formulas and step-by-step worked-out examples to demonstrate applications and clarify calculation methods. The book covers refractive, reflective, and diffractive optical components; lens optical devices; modern fringe pattern analysis; optical metrology; Fourier optics and optical image processing; electro-optical and acousto-optical devices; spatial and spectral filters; optical fibers and accessories; optical fabrication; and more. It includes over 2,000 tables, flow charts, graphs, schematics, drawings, photographs, and mathematical expressions.
Download or read book Springer Handbook of Optical Networks written by Biswanath Mukherjee and published by Springer Nature. This book was released on 2020-10-15 with total page 1169 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an authoritative, comprehensive reference on optical networks, the backbone of today’s communication and information society. The book reviews the many underlying technologies that enable the global optical communications infrastructure, but also explains current research trends targeted towards continued capacity scaling and enhanced networking flexibility in support of an unabated traffic growth fueled by ever-emerging new applications. The book is divided into four parts: Optical Subsystems for Transmission and Switching, Core Networks, Datacenter and Super-Computer Networking, and Optical Access and Wireless Networks. Each chapter is written by world-renown experts that represent academia, industry, and international government and regulatory agencies. Every chapter provides a complete picture of its field, from entry-level information to a snapshot of the respective state-of-the-art technologies to emerging research trends, providing something useful for the novice who wants to get familiar with the field to the expert who wants to get a concise view of future trends.
Download or read book Optical Fiber Communications Systems written by Le Nguyen Binh and published by CRC Press. This book was released on 2011-06-08 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carefully structured to provide practical knowledge on fundamental issues, Optical Fiber Communications Systems: Theory and Practice with MATLAB and Simulink Models explores advanced modulation and transmission techniques of lightwave communication systems. With coverage ranging from fundamental to modern aspects, the text presents optical communic
Download or read book The Optical Journal and Review of Optometry written by and published by . This book was released on 1924 with total page 1802 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Index of Specifications and Standards written by and published by . This book was released on 1997 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optical Thin Films written by James D. Rancourt and published by SPIE Press. This book was released on 1996 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical, user-oriented reference for engineers who must incorporate and specify coatings for filters, antiglare effects, polarization, or other purposes in optical or electro-optical systems design. It focuses on preparation techniques and characteristics of commercially available products and provides information needed to determine what type of filter is needed to solve a particular problem, what its limitations are, and how to care for it.
Download or read book Specifications and Standards for Optical Coating Durability written by Michael Hausner and published by . This book was released on 2019 with total page 53 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Spotlight gives a general overview of the durability of optical coatings and various durability tests referring to available civilian and military standards and specifications. It will allow a quick detection of the coating testing durability requirements and test conditions in MIL-Specs and other standards or specifications according to requirements defined in the relevant drawings or coating specifications. Intended for optical designers, this Spotlight is also useful for optical coating inspectors.
Download or read book Optical specifications written by Warren J. Smith and published by . This book was released on 1983 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optical Instruments Pt II written by Rudolf Kingslake and published by Elsevier. This book was released on 2012-12-02 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Optics and Optical Engineering, Volume V: Optical Instruments, Part II covers the principles and mode of operation of various optical instruments. This book contains 11 chapters that complete the series of 50 chapters, which provide information on many aspects of applied optics. The opening chapters of this book deal with the principles and properties of dispersing prisms and diffraction gratings. The subsequent chapters describe the principles and polarizing properties of spectrographs, monochromators, and spectrophotometers. Other chapters are devoted to the mode of operation and properties of other optical instruments, such as colorimeters, astronomical telescopes, and military, surveying, tracking, and medical optical instruments. The final chapters examine the fundamentals and applications of ophthalmic instruments and motion picture equipment. This text will be of value to optical scientists, engineers, and researchers.
