Download or read book Optical Detector Applications for Radiometric Measurements written by George P. Eppeldauer and published by Cambridge Scholars Publishing. This book was released on 2020-10-27 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recently developed optical radiation detectors need well-designed radiometers to perform improved radiometric, photometric, colorimetric, and radiation-temperature measurements. They can produce higher performance than traditionally used blackbody sources and lamps in wider application areas. This book presents research-based material in this field that has been implemented, realized, tested, verified, and evaluated. It can be used as a reference source for students, practicing scientists, engineers, technicians, instrument manufacturers and measurement/calibration people to learn, design, build, select, and use new generation radiometers. The book describes a number of design issues and applications to implement the correct input geometry for detectors to measure radiometric (power, irradiance and radiance) quantities, and DC, AC, and pulsed electrical output signals.
Download or read book Optical Detector and Radiometer Standards written by George P. Eppeldauer and published by Cambridge Scholars Publishing. This book was released on 2020-12-01 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses modern, user-friendly radiometric practices that make it possible to convert from traditional source-based optical radiation measurements to the more efficient and higher accuracy detector-based applications and calibrations. It considers improved performance optical detector and radiometer standards including photometers and tristimulus colorimeters, and describes research-based design considerations, measurement of radiometric, optical, and electronic characteristics, and comparison of absolute-, transfer-, and working-standard detectors and radiometers from the ultraviolet (UV) to the infrared (IR) range. The book will serve to guide the optical radiation measurement community, researchers, manufacturers, calibration laboratories, students, and practicing engineers to switch from the old and limited-use measurement methods to the higher performance detector-based applications. The radiometer standards discussed here can be used to produce wide range radiometric, photometric, colour, and radiation temperature measurements with low uncertainty.
Download or read book Introduction to Radiometry written by William L. Wolfe and published by SPIE Press. This book was released on 1998 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radiometry is an essential part of the optical design of virtually every optical instrument, and key to many applications. It is also used to measure the radiation of various objects. This tutorial examines both the techniques of calculating radiative transfer and the measurement of fluxes and radiometric properties of various sorts.
Download or read book The Art of Radiometry written by James M. Palmer and published by SPIE-International Society for Optical Engineering. This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The material from this book was derived from a popular first-year graduate class taught by James M. Palmer for over twenty years at the University of Arizona College of Optical Sciences. This text covers topics in radiation propagation, radiometric sources, optical materials, detectors of optical radiation, radiometric measurements, and calibration. Radiometry forms the practical basis of many current applications in aerospace engineering, infrared systems engineering, remote sensing systems, displays, visible and ultraviolet sensors, infrared detectors of optical radiation, and many other areas. While several texts individually cover topics in specific areas, this text brings the underlying principles together in a manner suitable for both classroom teaching and a reference volume that the practicing engineer can use.The level of discussion of the material is suitable for a class taught to advanced undergraduate students or graduate students. Although this book is not a theoretical treatment, the mathematics required to understand all equations include differential and integral calculus.This text should be foremost in the toolkit of the practicing engineer or scientist working on radiometric problems in areas of optical engineering, electro-optical engineering, systems engineering, imagery analysis, and many others, allowing the technical professional to successfully apply radiometric principles in his or her work.
Download or read book The Properties of Optical Radiation Detectors and Radiometers written by George P. Eppeldauer and published by Cambridge Scholars Publishing. This book was released on 2020-08-24 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book to investigate the improved performance of optical radiation detectors developed from the ultraviolet to the far-infrared in the past two decades. The development and applications of these improved detectors opened up a new era in radiometric, photometric, colorimetric, and radiation-temperature measurements where earlier blackbody sources and lamps were used with lower performance and in limited application areas. This book will serve to help students, practicing scientists, engineers, technicians, and instrument manufacturers to learn, compare and select the proper detectors for building, using, and calibrating opto-electronic instruments with SI traceability and lowered measurement uncertainty in extended application areas.
Download or read book Optical Radiometry written by and published by Elsevier. This book was released on 2005-10-26 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the practice of Optical Radiation Measurements with introductory material to introduce the topics discussed. It will be most useful for students, scientists and engineers working in any academic, industrial or governmental projects related to optical radiation. The book contains chapters that treat in detail the procedures and techniques for the characterization of both sources and detectors to the highest degree of accuracy and reliability. It has a chapter devoted specifically to optical measurements of laser sources and fiberoptics for communication and a chapter devoted to uncertainty in measurement and its treatment with real examples of optical measurements. The book contains introductory materials that will allow a newcomer to radiometry to develop the expertise to perform exacting and accurate measurement. The authors stress the various causes of uncertainty in each phase of a measurement and thus allow for users to arrive at a correct assessment of their uncertainty of measurement in their particular circumstance.· Authors are from the Standards laboratories of AUSTRALIA, CANADA, ENGLAND, GERMANY and the USA.· Latest techniques and practice of laboratory measurements to achieve the highest accuracy in the use of sources or detectors.· Unique illustrations of the apparatus and measurement techniques.· Practical measurement examples of calibration with full uncertainty analysis.· Comprehensive treatment of optical standards such as sources, detectors and radiometers. · A complete chapter on laser power measurements and standards for fiber optic measurements· A complete chapter on correlations in radiometry and practical examples.· A chapter devoted to diffraction effects in radiometry
Download or read book The Present State of Radiometry and Photometry written by Bruce Steiner and published by . This book was released on 1974 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Absolute Radiometry written by F Hengstberger and published by Elsevier. This book was released on 2012-12-02 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Absolute Radiometry: Electrically Calibrated Thermal Detectors of Optical Radiation considers the application of absolute radiometry, a technique employed in optical radiation metrology for the absolute measurement of radiant power. This book is composed of eight chapters and begins with the principles of the absolute measurement of radiant power. The subsequent chapters provide the criteria associated with reflectance and transmittance of optical radiation and the parameters used to characterize the performance of radiation detectors. A chapter presents an analysis of the temperature distribution in a detector element. This topic is followed by discussions of the environmental and instrumental corrections in absolute radiometry. The final chapters deal with the alternative optical power scales and direct current substitution methods used in other fields of metrology.
Download or read book Radiometry and the Detection of Optical Radiation written by Robert W. Boyd and published by John Wiley & Sons. This book was released on 1983-05-10 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents a treatment of fundamental aspects of the generation, transfer and detection of optical and infra-red radiation. Emphasis placed on practical aspects of radiometry in detection. Discusses formal principles of radiometry, signal-to-noise considerations in the detection of optical radiation, and the operation of various radiation detectors. Includes tables and graphs of blackbody functions.
Download or read book Field Guide to Radiometry written by Barbara G. Grant and published by SPIE-International Society for Optical Engineering. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written from a systems engineering perspective, the Field Guide to Radiometry covers topics in optical radiation propagation, material properties, sources, detectors, system components, measurement, calibration, and photometry. Appendices provide material on SI units, conversion factors, source luminance data, and many other subjects. The book's organization and extensive collection of diagrams, tables, and graphs will enable the reader to efficiently identify and apply relevant information to radiometric problems arising amid the demands of today's fast-paced technical environment.
Download or read book Introduction to Radiometry and Photometry Second Edition written by William Ross McCluney and published by Artech House. This book was released on 2014-11-01 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of an Artech House classic title describes in detail the relationship between radiometry and photometry. It covers information needed to solve problems in radiation transfer and detection, detectors, measuring instruments, and concepts in colorimetry. This revised second edition presents an updated treatment of modern radiometry and photometry, including brand new sections on applications and developments in light sources and scientific instruments for measuring radiation and light. Engineers are also provided with an exciting new chapter on the use of computerized optical ray tracing for “virtual” experiments on optical systems.
Download or read book Introduction to Imaging Spectrometers written by William L. Wolfe and published by SPIE Press. This book was released on 1997 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increased interest in imaging spectroscopy has arisen largely for technical reasons. This Tutorial Text first reviews the required background in optics, radiometry, imaging, spectral sensing and focal plane arrays. Then the principles of these subjects are applied to several specific problems to illustrate the way in which such instruments can be designed.
Download or read book Broadband UV VIS and IR Radiometric Photometric Color and Temperature Measurements written by George P. Eppeldauer and published by Cambridge Scholars Publishing. This book was released on 2021-04-07 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: In most field applications, broadband measurements are used where the spectral product of the source distribution and the meter’s spectral responsivity is measured. This book discusses detector-based radiometric, photometric, color, radiation-temperature, digital imaging-system, and LED measurements. It also shows that, while in photometry, the meter’s standard response covers only the visible, broadband measurements in the UV and IR require different standards. To avoid large errors when using a traditional detector- or source-standard, where the differences in the source distributions and in the meter’s responsivities produce large errors, the signal measurement procedure itself must be standardized. To satisfy the steps of the procedure, selected or properly designed meters should be used. This book is a guide to performing uniform broadband measurements with low uncertainty.
Download or read book Radiometric Temperature Measurements written by and published by Academic Press. This book was released on 2009-11-18 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the practice of radiation thermometry, both at a primary level and for a variety of applications, such as in the materials processing industries and remote sensing. This book is written for those who will a) apply radiation thermometry in industrial practice b) use radiation thermometers for scientific research, c) the radiation thermometry specialist in a national measurement institute d) developers of radiation thermometers who are working to innovate products for instrument manufacturers and e) developers non-contact thermometry methods to address challenging thermometry problems. The author(s) of each chapter were chosen from a group of international scientists who are experts in the field and specialist(s) on the subject matter covered in the chapter. A large number of references are included at the end of each chapter as a resource for those seeking a deeper or more detailed understanding. This book is more than a practice guide. Readers will gain in-depth knowledge in: (1) the proper selection of the type of thermometer; (2) the best practice in using the radiation thermometers; (3) awareness of the error sources and subsequent appropriate procedure to reduce the overall uncertainty; and (4) understanding of the calibration chain and its current limitations. - Coverage of all fundamental aspects of the radiometric measurements - Coverage of practical applications with details on the instrumentation, calibration, and error sources - Authors are from the national labs internationally leading in R&D in temperature measurements - Comprehensive coverage with large number of references
Download or read book Radiation Detectors for Medical Applications written by Stefaan Tavernier and published by Springer Science & Business Media. This book was released on 2006-10-02 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of this book is the use of scintillating materials in the detection of ionising radiation for medical imaging. The text surveys the state of the art in radiation detectors for medical imaging, followed by an in-depth review of all aspects of the use of scintillating materials. Also included are detailed discussion of ways to improve the performance of existing scintillating materials and completely novel uses of scintillating materials.
Download or read book Self study Manual on Optical Radiation Measurements written by and published by . This book was released on 1979 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Self study Manual on Optical Radiation Measurements written by Fred Edwin Nicodemus and published by . This book was released on 1976 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
