Download or read book Optical Design for LED Solid State Lighting written by Ching-Cherng Sun and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Light-emitting diodes (LEDs) are considered the most important light source of the 21st century owing to advantages of energy saving, long life, fast response, high colour performance, and environmental benefit. We believe that accurately understanding the light performances of LEDs and using them skilfully is an important capability for optical designers. This book provides an overview of the light performance of LED solid-state lighting (SSL) and can further effectively apply optical design to SSL at different levels. Optical design for SSL is classified into four levels: LED die, package, component, and system. All approaches are aimed at teaching readers to precisely determine the spatial and chromatic light performance of an LED and increasing the optical utilization factor of an LED luminaire to achieve optical energy efficiency. Part of IOP Series in Emerging Technologies in Optics and Photonics.

Download or read book Optical Design Led Solid State Lightin written by Tsung-Xian Lee and published by IOP ebooks. This book was released on 2022-08-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Light-emitting diodes (LEDs) are considered the most important light source of the 21st century owing to advantages of energy saving, long life, fast response, high colour performance, and environmental benefit. We believe that accurately understanding the light performances of LEDs and using them skilfully is an important capability for optical designers. This book provides an overview of the light performance of LED SSL and can further effectively apply optical design to SSL at different levels. Optical Design for SSL is classified into four levels including LED die, package, component, and system. All approaches are aimed at teaching readers to precisely determine the spatial and chromatic light performance of an LED and increasing the optical utilization factor of an LED luminaire to achieve optical energy efficiency. Recommended for optical designers, illumination designers, LED optical engineers, students - upper level undergraduate and graduates. Key Features: - Presents an essential guidebook for optical design in LED Lighting - Includes thorough explanations of LED light performance and limitations - Proposes four-level optical design in LED lighting - Includes chapter summaries - Provides a reader-friendly approach to ensure precision

Download or read book From LED to Solid State Lighting written by S. W. Ricky Lee and published by John Wiley & Sons. This book was released on 2021-09-17 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: FROM LED TO SOLID STATE LIGHTING A comprehensive and practical reference complete with hands-on exercises and experimental data In From LED to Solid State Lighting: Principles, Materials, Packaging, Characterization, and Applications, accomplished mechanical engineers Shi-Wei Ricky Lee, Jeffery C. C. Lo, Mian Tao, and Huaiyu Ye deliver a practical overview of the design and construction of LED lighting modules, from the fabrication of the LED chip to the LED modules incorporated in complete LED lighting fixtures. The distinguished authors discuss the major advantages of solid-state lighting, including energy savings, environmental friendliness, and lengthy operational life, as well as the contributions offered by the packaging of light-emitting diodes in the pursuit of these features. Readers will discover presentations of the technical issues that arise in packaging LED components, like interconnection, phosphor deposition, and encapsulation. They’ll also find insightful elaborations on optical design, analysis, and characterization. Discussions of LED applications, technology roadmaps, and IP issues round out the included material. This important book also includes: Thorough introductions to lighting, photometry, and colorimetry, the fundamentals of light-emitting diodes, and the fabrication of LED wafers and chips Practical discussions of the packaging of LED chips, wafer-level packaging of LED arrays, and optical and electrical characterization Comprehensive explorations of board-level assembly and LED modules and optical and electrical characterization In-depth examinations of thermal management, reliability engineering for LED packaging, and applications for general lighting Perfect for post-graduate students and practicing engineers studying or working in the field of LED manufacturing for solid state lighting applications, From LED to Solid State Lighting: Principles, Materials, Packaging, Characterization, and Applications is also an indispensable resource for managers and technicians seeking a one-stop guide to the subject.

Download or read book Handbook of Solid State Lighting and LEDs written by Zhe Chuan Feng and published by CRC Press. This book was released on 2017-06-12 with total page 1169 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook addresses the development of energy-efficient, environmentally friendly solid-state light sources, in particular semiconductor light emitting diodes (LEDs) and other solid-state lighting devices. It reflects the vast growth of this field and impacts in diverse industries, from lighting to communications, biotechnology, imaging, and medicine. The chapters include coverage of nanoscale processing, fabrication of LEDs, light diodes, photodetectors and nanodevices, characterization techniques, application, and recent advances. Readers will obtain an understanding of the key properties of solid-state lighting and LED devices, an overview of current technologies, and appreciation for the challenges remaining. The handbook will be useful to material growers and evaluators, device design and processing engineers, newcomers, students, and professionals in the field.

Download or read book Freeform Optics for LED Packages and Applications written by Kai Wang and published by John Wiley & Sons. This book was released on 2017-08-24 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical introduction to state-of-the-art freeform optics design for LED packages and applications By affording designers the freedom to create complex, aspherical optical surfaces with minimal or no aberrations, freeform design transcends the constraints imposed by hundreds of years of optics design and fabrication. Combining unprecedented design freedom with precise light irradiation control, freeform optics design is also revolutionizing the design and manufacture of high quality LED lighting. The first and only book of its kind, Freeform Optics for LED Packages and Applications helps put readers at the forefront of the freeform optics revolution. Designed to function as both an authoritative review of the current state of the industry and a practical introduction to advanced optical design for LED lighting, this book makes learning and mastering freeform optics skills simpler and easier than ever before with: Real-world examples and case studies systematically describing an array of algorithms and designs—from new freeform algorithms to design methods to advanced optical designs Coding for all freeform optics algorithms covered—makes it easier and more convenient to start developing points of freeform optics and construct lenses or reflectors, right away Case studies of a range of products, including designs for a freeform optics LED bulb, an LED spotlight, LED street lights, an LED BLU, and many more Freeform Optics for LED Packages and Applications is must-reading for optical design engineers and LED researchers, as well as advanced-level students with an interest in LED lighting. It is also an indispensable working resource design practitioners within the LED lighting industry.

Download or read book Fundamentals of Solid State Lighting written by Vinod Kumar Khanna and published by CRC Press. This book was released on 2014-06-03 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compared to traditional electrical filaments, arc lamps, and fluorescent lamps, solid-state lighting offers higher efficiency, reliability, and environmentally friendly technology. LED / solid-state lighting is poised to take over conventional lighting due to cost savings—there is pretty much no debate about this. In response to the recent activity in this field, Fundamentals of Solid-State Lighting: LEDs, OLEDs, and Their Applications in Illumination and Displays covers a range of solid-state devices, technologies, and materials used for lighting and displays. It also examines auxiliary but critical requirements of efficient applications, such as modeling, thermal management, reliability, and smart lighting. The book discusses performance metrics of LEDs such as efficiency, efficacy, current–voltage characteristics, optical parameters like spectral distribution, color temperature, and beam angle before moving on to luminescence theory, injection luminescence, radiative and non-radiative recombination mechanisms, recombination rates, carrier lifetimes, and related topics. This lays down the groundwork for understanding LED operation. The book then discusses energy gaps, light emission, semiconductor material, special equipment, and laboratory facilities. It also covers production and applications of high-brightness LEDs (HBLEDs) and organic LEDs (OLEDs). LEDs represent the landmark development in lighting since the invention of electric lighting, allowing us to create unique, low-energy lighting solutions, not to talk about their minor maintenance expenses. The rapid strides of LED lighting technology over the last few years have changed the dynamics of the global lighting market, and LEDs are expected to be the mainstream light source in the near future. In a nutshell, the book traces the advances in LEDs, OLEDs, and their applications, and presents an up-to-date and analytical perspective of the scenario for audiences of different backgrounds and interests.

Download or read book Materials for Solid State Lighting and Displays written by Adrian Kitai and published by John Wiley & Sons. This book was released on 2017-03-06 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: LEDs are in the midst of revolutionizing the lighting industry Up-to-date and comprehensive coverage of light-emitting materials and devices used in solid state lighting and displays Presents the fundamental principles underlying luminescence Includes inorganic and organic materials and devices LEDs offer high efficiency, long life and mercury free lighting solutions

Download or read book Introduction to Solid State Lighting written by Artūras Žukauskas and published by Wiley-Interscience. This book was released on 2002-04-18 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thorough reference that sheds light on the promising field of solid-state lighting Solid-state lighting is a rapidly emerging field. Light Emitting Diodes are already used in traffic signals, signage/contour lighting, large area displays, and automotive applications. But its greatest future lies in the possibility of applying solid-state lamps to general lighting. Solid-state lighting promises to reduce energy consumption as much as fifty percent, cut down on carbon-dioxide emission, and even spur the development of a completely new lighting industry. Giving this important emerging field the attention it deserves, Introduction to Solid-State Lighting comprehensively covers: The history of lighting The characterization of visible light Conventional light sources LED basics Extraction of light from high-brightness LEDs White LED Applications of solid-state lamps

Download or read book Assessment of Solid State Lighting Phase Two written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2017-05-11 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: The standard incandescent light bulb, which still works mainly as Thomas Edison invented it, converts more than 90% of the consumed electricity into heat. Given the availability of newer lighting technologies that convert a greater percentage of electricity into useful light, there is potential to decrease the amount of energy used for lighting in both commercial and residential applications. Although technologies such as compact fluorescent lamps (CFLs) have emerged in the past few decades and will help achieve the goal of increased energy efficiency, solid-state lighting (SSL) stands to play a large role in dramatically decreasing U.S. energy consumption for lighting. Since the publication of the 2013 National Research Council report Assessment of Advanced Solid-State Lighting, the penetration of SSL has increased dramatically, with a resulting savings in energy and costs that were foreshadowed by that study. What was not anticipated then is the dramatic dislocation and restructuring of the SSL marketplace, as cost reductions for light-emitting diode (LED) components reduced profitability for LED manufacturers. At the same time, there has been the emergence of new applications for SSL, which have the potential to create new markets and commercial opportunities for the SSL industry. Assessment of Solid-State Lighting, Phase Two discusses these aspects of changeâ€"highlighting the progress of commercialization and acceptance of SSL and reviewing the technical advances and challenges in achieving higher efficacy for LEDs and organic light-emitting diodes. This report will also discuss the recent trends in SSL manufacturing and opportunities for new applications and describe the role played by the Department of Energy (DOE) Lighting Program in the development of SSL.

Download or read book Solid State Lighting Reliability written by W.D. van Driel and published by Springer Science & Business Media. This book was released on 2012-09-06 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid State Lighting Reliability: Components to Systems begins with an explanation of the major benefits of solid state lighting (SSL) when compared to conventional lighting systems including but not limited to long useful lifetimes of 50,000 (or more) hours and high efficacy. When designing effective devices that take advantage of SSL capabilities the reliability of internal components (optics, drive electronics, controls, thermal design) take on critical importance. As such a detailed discussion of reliability from performance at the device level to sub components is included as well as the integrated systems of SSL modules, lamps and luminaires including various failure modes, reliability testing and reliability performance. A follow-up, Solid State Lighting Reliability Part 2, was published in 2017.

Download or read book Assessment of Advanced Solid State Lighting written by National Research Council and published by National Academies Press. This book was released on 2013-04-27 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: The standard incandescent light bulb, which still works mainly as Thomas Edison invented it, converts more than 90% of the consumed electricity into heat. Given the availability of newer lighting technologies that convert a greater percentage of electricity into useful light, there is potential to decrease the amount of energy used for lighting in both commercial and residential applications. Although technologies such as compact fluorescent lamps (CFLs) have emerged in the past few decades and will help achieve the goal of increased energy efficiency, solid-state lighting (SSL) stands to play a large role in dramatically decreasing U.S. energy consumption for lighting. This report summarizes the current status of SSL technologies and products-light-emitting diodes (LEDs) and organic LEDs (OLEDs)-and evaluates barriers to their improved cost and performance. Assessment of Advanced Solid State Lighting also discusses factors involved in achieving widespread deployment and consumer acceptance of SSL products. These factors include the perceived quality of light emitted by SSL devices, ease of use and the useful lifetime of these devices, issues of initial high cost, and possible benefits of reduced energy consumption.

Download or read book Practical Lighting Design with LEDs written by Ron Lenk and published by John Wiley & Sons. This book was released on 2017-04-03 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: The essential how-to guide to designing and building LED systems, revised and updated The second edition of Practical Lighting Design with LEDs has been revised and updated to provide the most current information for developing light-emitting diodes products. The authors, noted authorities in the field, offer a review of the most relevant topics including optical performance, materials, thermal design and modeling and measurement. Comprehensive in scope, the text covers all the information needed to design LEDs into end products. The user-friendly text also contains numerous drawings and schematics that show how things such as measurements are actually made, and show how circuits actually work. Designed to be practical, the text includes myriad notes and illustrative examples that give pointers and how-to guides on many of the book's topics. In addition, the book’s equations are used only for practical calculations, and are kept at the level of high-school algebra. This thoroughly expanded second edition offers: New chapters on the design of an LED flashlight, USB light, automotive taillight, and LED light bulbs A practical and user-friendly guide with dozens of new illustrations The nitty-gritty, day-to-day engineering and systems used to design and build complete LED systems An essential resource on the cutting-edge technology of Light-Emitting Diodes Practical Lighting Design with LEDs helps engineers and managers meet the demand for the surge in usage for products using light-emitting diodes with a practical guide that takes them through the relevant fields of light, electronic and thermal design.

Download or read book Optics in Our Time written by Mohammad D. Al-Amri and published by Springer. This book was released on 2016-12-12 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: Light and light based technologies have played an important role in transforming our lives via scientific contributions spanned over thousands of years. In this book we present a vast collection of articles on various aspects of light and its applications in the contemporary world at a popular or semi-popular level. These articles are written by the world authorities in their respective fields. This is therefore a rare volume where the world experts have come together to present the developments in this most important field of science in an almost pedagogical manner. This volume covers five aspects related to light. The first presents two articles, one on the history of the nature of light, and the other on the scientific achievements of Ibn-Haitham (Alhazen), who is broadly considered the father of modern optics. These are then followed by an article on ultrafast phenomena and the invisible world. The third part includes papers on specific sources of light, the discoveries of which have revolutionized optical technologies in our lifetime. They discuss the nature and the characteristics of lasers, Solid-state lighting based on the Light Emitting Diode (LED) technology, and finally modern electron optics and its relationship to the Muslim golden age in science. The book’s fourth part discusses various applications of optics and light in today's world, including biophotonics, art, optical communication, nanotechnology, the eye as an optical instrument, remote sensing, and optics in medicine. In turn, the last part focuses on quantum optics, a modern field that grew out of the interaction of light and matter. Topics addressed include atom optics, slow, stored and stationary light, optical tests of the foundation of physics, quantum mechanical properties of light fields carrying orbital angular momentum, quantum communication, and Wave-Particle dualism in action.

Download or read book Handbook of Solid state Lighting and LEDs written by Zhe Chuan Feng and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "This handbook addresses the development of energy-efficient, environmentally friendly solid-state light sources, in particular semiconductor light emitting diodes (LEDs) and other solid-state lighting devices. It reflects the vast growth of this field and impacts in diverse industries, from lighting to communications, biotechnology, imaging, and medicine. The chapters include coverage of nanoscale processing, fabrication of LEDs, light diodes, photodetectors and nanodevices, characterization techniques, application, and recent advances. Readers will obtain an understanding of the key properties of solid-state lighting and LED devices, an overview of current technologies, and appreciation for the challenges remaining. The handbook will be useful to material growers and evaluators, device design and processing engineers, newcomers, students, and professionals in the field."--Provided by publisher.

Download or read book Freeform Optics for LED Packages and Applications written by Kai Wang and published by John Wiley & Sons. This book was released on 2017-08-24 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical introduction to state-of-the-art freeform optics design for LED packages and applications By affording designers the freedom to create complex, aspherical optical surfaces with minimal or no aberrations, freeform design transcends the constraints imposed by hundreds of years of optics design and fabrication. Combining unprecedented design freedom with precise light irradiation control, freeform optics design is also revolutionizing the design and manufacture of high quality LED lighting. The first and only book of its kind, Freeform Optics for LED Packages and Applications helps put readers at the forefront of the freeform optics revolution. Designed to function as both an authoritative review of the current state of the industry and a practical introduction to advanced optical design for LED lighting, this book makes learning and mastering freeform optics skills simpler and easier than ever before with: Real-world examples and case studies systematically describing an array of algorithms and designs—from new freeform algorithms to design methods to advanced optical designs Coding for all freeform optics algorithms covered—makes it easier and more convenient to start developing points of freeform optics and construct lenses or reflectors, right away Case studies of a range of products, including designs for a freeform optics LED bulb, an LED spotlight, LED street lights, an LED BLU, and many more Freeform Optics for LED Packages and Applications is must-reading for optical design engineers and LED researchers, as well as advanced-level students with an interest in LED lighting. It is also an indispensable working resource design practitioners within the LED lighting industry.

Download or read book Solid State Lighting Reliability Part 2 written by Willem Dirk van Driel and published by Springer. This book was released on 2017-07-11 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past four years we have witnessed rapid development in technology and significant market penetration in many applications for LED systems. New processes and new materials have been introduced; new standards and new testing methods have been developed; new driver, control and sensing technologies have been integrated; and new and unknown failure modes have also been presented. In this book, Solid State Lighting Reliability Part 2, we invited the experts from industry and academia to present the latest developments and findings in the LED system reliability arena. Topics in this book cover the early failures and critical steps in LED manufacturing; advances in reliability testing and standards; quality of colour and colour stability; degradation of optical materials and the associated chromaticity maintenance; characterization of thermal interfaces; LED solder joint testing and prediction; common failure modes in LED drivers; root causes for lumen depreciation; corrosion sensitivity of LED packages; reliability management for automotive LEDs, and lightning effects on LEDs. This book is a continuation of Solid State Lighting Reliability: Components to Systems (published in 2013), which covers reliability aspects ranging from the LED to the total luminaire or system of luminaires. Together, these two books are a full set of reference books for Solid State Lighting reliability from the performance of the (sub-) components to the total system, regardless its complexity.

Download or read book LED Packaging for Lighting Applications written by Shen Liu and published by John Wiley & Sons. This book was released on 2011-07-05 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first light-emitting diode (LED) was invented by Holonyak and Bevacqua in 1962, LEDs have made remarkable progress in the past few decades with the rapid development of epitaxy growth, chip design and manufacture, packaging structure, processes, and packaging materials. LEDs have superior characteristics such as high efficiency, small size, long life, low power consumption, and high reliability. The market for white LED is growing rapidly in various applications. It has been widely accepted that white LEDs will be the fourth illumination source to substitute the incandescent, fluorescent, and high-pressure sodium lamps. With the development of LED chip and packaging technologies, the efficiency of high power white LED will broaden the application markets of LEDs while changing the lighting concepts of our lives. In LED Packaging for Lighting Applications, Professors Liu and Luo cover the full spectrum of design, manufacturing, and testing. Many concepts are proposed for the first time, and readers will benefit from the concurrent engineering and co-design approaches to advanced engineering design of LED products. One of the only books to cover LEDs from package design to manufacturing to testing Focuses on the design of LED packaging and its applications such as road lights Includes design methods and experiences necessary for LED engineers, especially optical and thermal design Introduces novel LED packaging structures and manufacturing processes, such as ASLP Covers reliability considerations, the most challenging problem for the LED industry Provides measurement and testing standards, which are critical for LED development, for both LED and LED fixtures Codes and demonstrations available from the book’s Companion Website This book is ideal for practicing engineers working in design or packaging at LED companies and graduate students preparing for work in industry. This book also provides a helpful introduction for advanced undergraduates, graduates, researchers, lighting designers, and product managers interested in the fundamentals of LED design and production. Color version of selected figures can be found at www.wiley.com/go/liu/led