Download or read book Opportunities in Protection Materials Science and Technology for Future Army Applications written by National Research Council and published by National Academies Press. This book was released on 2011-08-27 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Armor plays a significant role in the protection of warriors. During the course of history, the introduction of new materials and improvements in the materials already used to construct armor has led to better protection and a reduction in the weight of the armor. But even with such advances in materials, the weight of the armor required to manage threats of ever-increasing destructive capability presents a huge challenge. Opportunities in Protection Materials Science and Technology for Future Army Applications explores the current theoretical and experimental understanding of the key issues surrounding protection materials, identifies the major challenges and technical gaps for developing the future generation of lightweight protection materials, and recommends a path forward for their development. It examines multiscale shockwave energy transfer mechanisms and experimental approaches for their characterization over short timescales, as well as multiscale modeling techniques to predict mechanisms for dissipating energy. The report also considers exemplary threats and design philosophy for the three key applications of armor systems: (1) personnel protection, including body armor and helmets, (2) vehicle armor, and (3) transparent armor. Opportunities in Protection Materials Science and Technology for Future Army Applications recommends that the Department of Defense (DoD) establish a defense initiative for protection materials by design (PMD), with associated funding lines for basic and applied research. The PMD initiative should include a combination of computational, experimental, and materials testing, characterization, and processing research conducted by government, industry, and academia.
Download or read book Application of Lightweighting Technology to Military Aircraft Vessels and Vehicles written by National Research Council and published by National Academies Press. This book was released on 2012-04-27 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lightweighting is a concept well known to structural designers and engineers in all applications areas, from laptops to bicycles to automobiles to buildings and airplanes. Reducing the weight of structures can provide many advantages, including increased energy efficiency, better design, improved usability, and better coupling with new, multifunctional features. While lightweighting is a challenge in commercial structures, the special demands of military vehicles for survivability, maneuverability and transportability significantly stress the already complex process. Application of Lightweighting Technology to Military Vehicles, Vessels, and Aircraft assesses the current state of lightweighting implementation in land, sea, and air vehicles and recommends ways to improve the use of lightweight materials and solutions. This book considers both lightweight materials and lightweight design; the availability of lightweight materials from domestic manufacturers; and the performance of lightweight materials and their manufacturing technologies. It also considers the "trade space"-that is, the effect that use of lightweight materials or technologies can have on the performance and function of all vehicle systems and components. This book also discusses manufacturing capabilities and affordable manufacturing technology to facilitate lightweighting. Application of Lightweighting Technology to Military Vehicles, Vessels, and Aircraft will be of interest to the military, manufacturers and designers of military equipment, and decision makers.
Download or read book Advances in Ceramic Armor VIII Volume 33 Issue 5 written by Jeffrey J. Swab and published by John Wiley & Sons. This book was released on 2012-11-29 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manuscripts contained in this issue of Ceramic Engineering and Science Proceedings were selected from among the more than seventy presentations at the Armor Ceramics Symposium. The discussions are divided into three sections: Modeling and dynamic behavior, Transparent materials, and Opaque materials. Conducted during the 36th annual International Conference on Advanced Ceramics and Composites (ICACC), this event is one of the premier global conferences for the latest developments in the fabrication, characterization, and application of ceramic materials to meet the needs of the military, police, and other public defense, security, and protection organizations.
Download or read book Protective Armor Engineering Design written by Magdi El Messiry and published by CRC Press. This book was released on 2019-09-24 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is increasing interest in the area of protective vests, either for protection against bullets or protection from the most realistic threats within domestic frontline operations: edged weapon, knives, and medical needles. This volume addresses that need. This new book provides an in-depth survey of the state-of-the-art research and practical techniques in the area of protected fabrics, especially stab-resistant and bulletproof fabrics. The book covers: • The history of protective armor: the long history of the art of protective armor manufacturing. • Materials used for body armor: the design and materials used for soft armor to increase its perforation-resistance utilizing high-performance fibers. • Anti-stab and anti-bullet armor design: the different design parameters required for the design of flexible armor in order to stop high-velocity projectiles. • The comfort of the body armor design: the flexibility, thermal resistivity, and evaporative moisture resistivity through the fabric. • Methods of testing the flexible body armors: testing the components of flexible body armor, according to the level of the protection required, such as NIJ Standards, HOSDB Body Armour Standards for UK Police, and the German SK1 Standard, among others. Written by an expert in textile composite material engineering, this volume fills an important gap in the area of protective fabric against stabbing or bullets and provides invaluable practical knowledge for body armor design.
Download or read book Dynamic Behavior of Materials Volume 1 written by Dan Casem and published by Springer. This book was released on 2016-10-14 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Behavior of Materials, Volume 1 of the Proceedings of the 2016 SEM Annual Conference& Exposition on Experimental and Applied Mechanics, the first volume of ten from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers on: Quantitative Visualization Fracture & Fragmentation Dynamic Behavior of Low Impedance Materials Shock & Blast Dynamic Behavior of Composites Novel Testing Techniques Hybrid Experimental & Computational Methods Dynamic Behavior of Geo-materials General Material Behavior
Download or read book Opportunities in Biotechnology for Future Army Applications written by National Research Council and published by National Academies Press. This book was released on 2001-07-11 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report surveys opportunities for future Army applications in biotechnology, including sensors, electronics and computers, materials, logistics, and medical therapeutics, by matching commercial trends and developments with enduring Army requirements. Several biotechnology areas are identified as important for the Army to exploit, either by direct funding of research or by indirect influence of commercial sources, to achieve significant gains in combat effectiveness before 2025.
Download or read book Army Science and Technology Master Plan written by United States. Department of the Army and published by . This book was released on 1998 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials Research to Meet 21st Century Defense Needs written by National Research Council and published by National Academies Press. This book was released on 2003-03-25 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to achieve the revolutionary new defense capabilities offered by materials science and engineering, innovative management to reduce the risks associated with translating research results will be needed along with the R&D. While payoff is expected to be high from the promising areas of materials research, many of the benefits are likely to be evolutionary. Nevertheless, failure to invest in more speculative areas of research could lead to undesired technological surprises. Basic research in physics, chemistry, biology, and materials science will provide the seeds for potentially revolutionary technologies later in the 21st century.
Download or read book Materials Science and Engineering written by National Research Council and published by National Academies Press. This book was released on 2000-01-16 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials are the foundation and fabric of manufactured products. In fact, many leading commercial products and military systems could not exist without advanced materials and many of the new products critical to the nation's continued prosperity will come only through the development and commercialization of new materials. Thus, the field of materials science and engineering (MS&E) affects quality of life, industrial competitiveness, and the global environment. The United States leads the world in materials research and development, but does not have as impressive a record in the commercialization of new materials. This book explores the relationships among the producers and users of materials and examines the processes of innovationâ€"from the generation of knowledge to the ultimate integration of a material into a useful product. The authors recommend ways to accelerate the rate at which new ideas are integrated into finished products. Real-life case studies provide an accurate depiction of the processes that take materials and process innovations from the laboratory, to the factory floor, and ultimately to the consumer, drawing on experiences with three distinctive MS&E applicationsâ€"advanced aircraft turbines, automobiles, and computer chips and information-storage devices.
Download or read book Transformational Science And Technology For The Current And Future Force With Cd rom Proceedings Of The 24th Us Army Science Conference written by A M Rajendran and published by World Scientific. This book was released on 2006-11-08 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the reader with a unique opportunity to understand the basic and applied research and technology areas that support applications to enable Transformational capabilities for US Soldiers. The research papers are in line with the theme of the 24th Army Science Conference: “Transformational Science and Technology for the Current and Future Force,” emphasizing the critical role of Science and Technology in addressing the significant challenges posed by Global War On Terrorism while simultaneously developing Transformational capabilities for the Future Force.
Download or read book Achieving Leadership in Materials Technology for the Army of the Future written by and published by National Academies. This book was released on 1986 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanotechnology for Defence Applications written by Narendra Kumar and published by Springer. This book was released on 2020-11-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the application of nanoscience and nanotechnology in military defence strategies. Both historical and current perspectives on military technologies are discussed. The book provides comprehensive details on current trends in the application of nanotechnology to ground, air, and naval specializations. Furthermore, nanotechnology-enabled high energy explosives and propellants, chemical, biological, radiation, and nuclear threats and their detection/protection, and camouflage and stealth for signature management of military targets in multispectral wavelength signals are analyzed. The book also covers nanotechnology-enabled armor and platforms, which may serve as lightweight and high mechanical strength options in contrast to conventional systems. Finally, the book also emphasizes future military applications of nanotechnology and its integration into ‘smart’ materials. Provides comprehensive details on trends in the application of nanotechnology to ground, air, and naval defence systems; Examines the application of nanoscience and nanotechnology in military defence strategies; Offers pathways and research avenues for development of nanotechnology and materials applications in military capacities.
Download or read book Fusion of Security System Data to Improve Airport Security written by National Research Council and published by National Academies Press. This book was released on 2007-11-14 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: The security of the U.S. commercial aviation system has been a growing concern since the 1970's when the hijacking of aircraft became a serious problem. Over that period, federal aviation officials have been searching for more effective ways for non-invasive screening of passengers, luggage, and cargo to detect concealed explosives and weapons. To assist in this effort, the Transportation Security Administration (TSA) asked the NRC for a study of emerging screening technologies. This book - the fourth of four - focuses on data fusion as a means to significantly improve the ability of the existing suite of airport detection systems and access control systems to detect and prevent attacks. The book presents a discussion of the data fusion, an analysis of current data fusion efforts, and an assessment of data fusion opportunities for various airport security activities.
Download or read book Achieving leadership in materials technology for the army of the future written by Various and published by . This book was released on 1986 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report responds to a request from the U.S. Department of the Navy to the NRC for a study to assist the Army in identifying and meeting its materials requirements for the development of advanced weapons and support systems.
Download or read book Dynamic Armour written by Fouad Sabry and published by One Billion Knowledgeable. This book was released on 2022-01-16 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: What Is Dynamic Armour Electric armour or electromagnetic armour is a type of reactive armour proposed for the protection of ships and armoured fighting vehicles from shaped charge and possibly kinetic weapons using a strong electric current, complementing or replacing conventional explosive reacting armour (ERA). How You Will Benefit (I) Insights, and validations about the following topics: Chapter 1: Dynamic armour Chapter 2: Reactive armour Chapter 3: Active protection system Chapter 4: Shaped charge Chapter 5: Defence Science and Technology Laboratory Chapter 6: Future Rapid Effect System Chapter 7: Materials science (II) Answering the public top questions about dynamic armour. (III) Real world examples for the usage of dynamic armour in many fields. (IV) 17 appendices to explain, briefly, 266 emerging technologies in each industry to have 360-degree full understanding of dynamic armour' technologies. Who This Book Is For Professionals, undergraduate and graduate students, enthusiasts, hobbyists, and those who want to go beyond basic knowledge or information for any kind of dynamic armour.
Download or read book Transformational Science and Technology for the Current and Future Force written by John A. Parmentola and published by World Scientific Publishing Company. This book was released on 2006 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the reader with a unique opportunity to understand the basic and applied research and technology areas that support applications to enable Transformational capabilities for US Soldiers. The research papers are in line with the theme of the 24th Army Science Conference: "Transformational Science and Technology for the Current and Future Force," emphasizing the critical role of Science and Technology in addressing the significant challenges posed by Global War On Terrorism while simultaneously developing Transformational capabilities for the Future Force.
Download or read book Microwave Processing of Materials written by National Research Council and published by National Academies Press. This book was released on 1994-02-01 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microwaves can be effectively used in the processing of industrial materials under a wide range of conditions. However, microwave processing is complex and multidisciplinary in nature, and a high degree of technical knowledge is needed to determine how, when, and where the technology can be most profitably utilized. This book assesses the potential of microwave technology for industrial applications, reviews the latest equipment and processing methods, and identifies both the gaps in understanding of microwave processing technology and the promising development opportunities that take advantage of this new technology's unique performance characteristics.
