Download or read book Operating Practices for Industrial Water Management Influent water systems written by Loraine Huchler and published by Gulf Publishing Company. This book was released on 2007 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an easy-to-understand book for practical use by the operator or engineer in the plant. Organised as a field-guide, information is often presented in bullet-point format, graphs, diagrams and schematics that the operator can easily put to use in daily plant activity. References to many industrial standards, such as ASME, AQBMA, CTI and NACE, are included to provide comprehensive coverage rather than one picture from one association.
Download or read book Onsite Wastewater Treatment Systems Manual written by and published by . This book was released on 2002 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This manual contains overview information on treatment technologies, installation practices, and past performance."--Introduction.
Download or read book Industrial Wastewater Treatment Recycling and Reuse written by Vivek V. Ranade and published by Butterworth-Heinemann. This book was released on 2014-07-21 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Wastewater Treatment, Recycling and Reuse is an accessible reference to assist you when handling wastewater treatment and recycling. It features an instructive compilation of methodologies, including advanced physico-chemical methods and biological methods of treatment. It focuses on recent industry practices and preferences, along with newer methodologies for energy generation through waste. The book is based on a workshop run by the Indus MAGIC program of CSIR, India. It covers advanced processes in industrial wastewater treatment, applications, and feasibility analysis, and explores the process intensification approach as well as implications for industrial applications. Techno-economic feasibility evaluation is addressed, along with a comparison of different approaches illustrated by specific case studies. Industrial Wastewater Treatment, Recycling and Reuse introduces you to the subject with specific reference to problems currently being experienced in different industry sectors, including the petroleum industry, the fine chemical industry, and the specialty chemicals manufacturing sector. - Provides practical solutions for the treatment and recycling of industrial wastewater via case studies - Instructive articles from expert authors give a concise overview of different physico-chemical and biological methods of treatment, cost-to-benefit analysis, and process comparison - Supplies you with the relevant information to make quick process decisions
Download or read book Water Reuse written by National Research Council and published by National Academies Press. This book was released on 2012-07-17 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expanding water reuse-the use of treated wastewater for beneficial purposes including irrigation, industrial uses, and drinking water augmentation-could significantly increase the nation's total available water resources. Water Reuse presents a portfolio of treatment options available to mitigate water quality issues in reclaimed water along with new analysis suggesting that the risk of exposure to certain microbial and chemical contaminants from drinking reclaimed water does not appear to be any higher than the risk experienced in at least some current drinking water treatment systems, and may be orders of magnitude lower. This report recommends adjustments to the federal regulatory framework that could enhance public health protection for both planned and unplanned (or de facto) reuse and increase public confidence in water reuse.
Download or read book Assessment of Treatment Plant Performance and Water Quality Data A Guide for Students Researchers and Practitioners written by Marcos von Sperling and published by IWA Publishing. This book was released on 2020-01-15 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the basic principles for evaluating water quality and treatment plant performance in a clear, innovative and didactic way, using a combined approach that involves the interpretation of monitoring data associated with (i) the basic processes that take place in water bodies and in water and wastewater treatment plants and (ii) data management and statistical calculations to allow a deep interpretation of the data. This book is problem-oriented and works from practice to theory, covering most of the information you will need, such as (a) obtaining flow data and working with the concept of loading, (b) organizing sampling programmes and measurements, (c) connecting laboratory analysis to data management, (e) using numerical and graphical methods for describing monitoring data (descriptive statistics), (f) understanding and reporting removal efficiencies, (g) recognizing symmetry and asymmetry in monitoring data (normal and log-normal distributions), (h) evaluating compliance with targets and regulatory standards for effluents and water bodies, (i) making comparisons with the monitoring data (tests of hypothesis), (j) understanding the relationship between monitoring variables (correlation and regression analysis), (k) making water and mass balances, (l) understanding the different loading rates applied to treatment units, (m) learning the principles of reaction kinetics and reactor hydraulics and (n) performing calibration and verification of models. The major concepts are illustrated by 92 fully worked-out examples, which are supported by 75 freely-downloadable Excel spreadsheets. Each chapter concludes with a checklist for your report. If you are a student, researcher or practitioner planning to use or already using treatment plant and water quality monitoring data, then this book is for you! 75 Excel spreadsheets are available to download.
Download or read book Management of Legionella in Water Systems written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2020-02-20 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Legionnaires' disease, a pneumonia caused by the Legionella bacterium, is the leading cause of reported waterborne disease outbreaks in the United States. Legionella occur naturally in water from many different environmental sources, but grow rapidly in the warm, stagnant conditions that can be found in engineered water systems such as cooling towers, building plumbing, and hot tubs. Humans are primarily exposed to Legionella through inhalation of contaminated aerosols into the respiratory system. Legionnaires' disease can be fatal, with between 3 and 33 percent of Legionella infections leading to death, and studies show the incidence of Legionnaires' disease in the United States increased five-fold from 2000 to 2017. Management of Legionella in Water Systems reviews the state of science on Legionella contamination of water systems, specifically the ecology and diagnosis. This report explores the process of transmission via water systems, quantification, prevention and control, and policy and training issues that affect the incidence of Legionnaires' disease. It also analyzes existing knowledge gaps and recommends research priorities moving forward.
Download or read book Water Code written by Texas and published by . This book was released on 1972 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coagulation and Flocculation in Water and Wastewater Treatment written by John Bratby and published by IWA Publishing. This book was released on 2006-10-15 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coagulation and Flocculation in Water and Wastewater Treatment provides a comprehensive account of coagulation and flocculation techniques and technologies in a single volume covering theoretical principles to practical applications. Thoroughly revised and updated since the 1st Edition it has been progressively modified and increased in scope to cater for the requirements of practitioners involved with water and wastewater treatment. A thorough gamut of treatment scenarios is attempted, including turbidity, color and organics removal, including the technical aspects of enhanced coagulation. The effects of temperature and ionic content are described as well as the removal of specific substances such as arsenic and phosphorus. Chemical phosphorus removal is dealt with in detail, Rapid mixing for efficient coagulant utilization, and flocculation are dealt with in specific chapters. Water treatment plant waste sludge disposal is dealt with in considerable detail, in an Appendix devoted to this subject. Invaluble for water scientists, engineers and students of this field, Coagulation and Flocculation in Water and Wastewater Treatment is a convenient reference handbook in the form of numerous examples and appended information.
Download or read book Water Safety Plan Manual written by World Health Organization and published by World Health Organization. This book was released on 2009 with total page 109 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 2004, the WHO Guidelines for Drinking Water Quality recommended that water suppliers develop and implement "Water Safety Plans" (WSPs) in order to systematically assess and manage risks. Since this time, governments and regulators, water suppliers and practitioners have increasingly embraced this approach, but they have also requested further guidance. This much-anticipated workbook answers this call by describing how to develop and implement a WSP in clear and practical terms. Stepwise advice is provided through 11 learning modules, each representing a key step in the WSP development and implementation process: 1. Assemble the WSP team; 2. Describe the water supply system; 3. Identify hazards and hazardous events and assess the risks; 4. Determine and validate control measures, reassess and prioritise the risks; 5. Develop, implement and maintain an improvement/upgrade plan; 6. Define monitoring of the control measures; 7. Verify the effectiveness of the WSP; 8. Prepare management procedures; 9. Develop supporting programmes; 10. Plan and carry out periodic review of the WSP; 11. Revise the WSP following an incident ; Every Module is divided into three sections: 'Overview', 'Examples and Tools', and 'Case studies'. The overview section provides a brief introduction to the Module, including why it is important and how it fits into the overall WSP development and implementation process. It outlines key activities that should be carried out, lists typical challenges that may be encountered, and summarizes the essential outputs to be produced. The examples and tools section provides resources which could be adapted to support the development and implementation of WSPs. These resources include example tables and checklists, template forms, diagrams, or practical tips to help a WSP team address specific challenges. These are often example outputs and methodologies adapted from recent WSP experiences. Each Module concludes with case studies so the reader can benefit from lessons-learned from real-life experiences. They are intended to make WSP concepts more concrete and to help readers anticipate issues and challenges that may arise. The descriptions were drawn from WSP initiatives in Australia, the Latin American and the Caribbean region (LAC), and the United Kingdom.
Download or read book Recent Trends in Waste Water Treatment and Water Resource Management written by Sadhan Kumar Ghosh and published by Springer Nature. This book was released on 2020-02-04 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses a complex issue – water sustainability – that requires a combined approach to manage both water and energy. It highlights several technologies that have been introduced to study the water–energy linkage. It also discusses the need to develop effective laws for water management. In turn, the book assesses hybrid biological systems and demonstrates why they are better for the wastewater treatment process. Lastly, it reviews wastewater quality requirements, which have been the primary driver of industrial wastewater treatment programs in India. Gathering selected, high-quality research papers presented at the IconSWM 2018 conference, the book offers a valuable asset, not only for researchers and academics, but also for industrial practitioners and policymakers.
Download or read book Safe Use of Wastewater in Agriculture written by Hiroshan Hettiarachchi and published by Springer. This book was released on 2018-03-09 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a broad and global level description of the current status of wastewater use in agriculture and then brings the readers to various places in the MENA Region and Europe to explain how some countries and regions have addressed the challenges during implementation. On a global scale, over 20 million hectares of agricultural land are irrigated using wastewater. This is one good, and perhaps the most prominent, example of the safe use potential of wastewater. Water scarcity and the cost of energy and fertilisers are among the main factors driving millions of farmers and other entrepreneurs to make use of wastewater. In order to address the technical, institutional, and policy challenges of safe water reuse, developing countries and countries in transition need clear institutional arrangements and more skilled human resources, with a sound understanding of the opportunities and potential risks of wastewater use. Stakeholders in wastewater irrigation who need to implement from scratch or improve current conditions, find it difficult to gather the necessary information on practical implementation aspects. The main objective of this book is to bridge that gap.
Download or read book Industrial Water Management written by William Byers and published by John Wiley & Sons. This book was released on 2010-08-26 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This CD-ROM shows how to systematically incorporate the principles of water conservation, recycling, and reuse into the design of new plants, retrofits of existing systems, and technology development. Technology summaries and case studies that support this systematic approach to water reuse, as well as recommendations for further research, are included. Included in the price of this CD-ROM is an additional chapter, available in December 2002, detailing water reuse opportunities by industry. The chapter will address the general uses of water in industry, their associated energy costs, and energy management as related to water use and water use reduction.
Download or read book Identifying Future Drinking Water Contaminants written by National Research Council and published by National Academies Press. This book was released on 1999-09-30 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: With an increasing population, use of new and diverse chemicals that can enter the water supply, and emergence of new microbial pathogens, the U.S. federal government is faced with a regulatory dilemma: Where should it focus its attention and limited resources to ensure safe drinking water supplies for the future? Identifying Future Drinking Water Contaminants is based on a 1998 workshop on emerging drinking water contaminants. It includes a dozen papers that were presented on new and emerging microbiological and chemical drinking water contaminants, associated analytical and water treatment methods for their detection and removal, and existing and proposed environmental databases to assist in their proactive identification and regulation. The papers are preceded by a conceptual approach and related recommendations to EPA for the periodic creation of future Drinking Water Contaminant Candidate Lists (CCLsâ€"produced every five yearsâ€"include currently unregulated chemical and microbiological substances that are known or anticipated to occur in public water systems and that may pose health risks).
Download or read book Handbook of Water and Wastewater Treatment Plant Operations written by Frank R. Spellman and published by CRC Press. This book was released on 2020-05-17 with total page 1113 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Water and Wastewater Treatment Plant Operations is the first thorough resource manual developed exclusively for water and wastewater plant operators. Now regarded as an industry standard, this fourth edition has been updated throughout, and explains the material in easy-to-understand language. It also provides real-world case studies and operating scenarios, as well as problem-solving practice sets for each scenario. Features: Updates the material to reflect the developments in the field Includes new math operations with solutions, as well as over 250 new sample questions Adds updated coverage of energy conservation measures with applicable case studies Enables users to properly operate water and wastewater plants and suggests troubleshooting procedures for returning a plant to optimum operation levels Prepares operators for licensure exams A complete compilation of water science, treatment information, process control procedures, problem-solving techniques, safety and health information, and administrative and technological trends, this text serves as a resource for professionals working in water and wastewater operations and operators preparing for wastewater licensure exams. It can also be used as a supplemental textbook for undergraduate and graduate students studying environmental science, water science, and environmental engineering.
Download or read book Waste Water Engineering written by Dr. B.C. Punmia and published by Firewall Media. This book was released on 1998 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Characterizing and Managing Salinity Loadings in Reclaimed Water Systems written by Ken Thompson and published by American Water Works Association. This book was released on 2006 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problem of salinity in reclaimed water is growing as more utilities choose to use reclaimed water for irrigation and other purposes. This project is the first comprehensive look at this problem on a national level. The project conducted literature reviews on the sources of salinity to municipal wastewater and on constraints to using reclaimed water, conducted two surveys of utilities that reclaim water, and summarized regulations regarding reclaimed water. Salt balances were developed for sewersheds in five case study utilities integrating extensive field sampling, a household survey, and a newly developed model, Water Quality (WQ) Analyst. Finally, the net annualized cost of potential salinity mitigation practices was determined using an economics model. CD included with full Appendices.
Download or read book Metabolism of the Anthroposphere second edition written by Peter Baccini and published by MIT Press. This book was released on 2012-02-10 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: An overview of the cultural evolution of material flows and stocks with an emphasis on the design of metabolic processes in urban systems. Over the last several thousand years of human life on Earth, agricultural settlements became urban cores, and these regional settlements became tightly connected through infrastructures transporting people, materials, and information. This global network of urban systems, including ecosystems, is the anthroposphere; the physical flows and stocks of matter and energy within it form its metabolism. This book offers an overview of the metabolism of the anthroposphere, with an emphasis on the design of metabolic systems. It takes a cultural historical perspective, supported with methodology from the natural sciences and engineering. The book will be of interest to scholars and practitioners in the fields of regional development, environmental protection, and material management. It will also be a resource for undergraduate and graduate students in industrial ecology, environmental engineering, and resource management. The authors describe the characteristics of material stocks and flows of human settlements in space and time; introduce the method of material flow analysis (MFA) for metabolic studies; analyze regional metabolism and the material systems generated by basic activities; and offer four case studies of optimal metabolic system design: phosphorus management, urban mining, waste management, and mobility. This second edition of an extremely influential book has been substantially revised and greatly expanded. Its new emphasis on design and resource utilization reflects recent debates and scholarship on sustainable development and climate change.
