Download or read book Materials and Processes written by Barrie D. Dunn and published by Springer. This book was released on 2015-12-29 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to assist scientists and engineers select the ideal material or manufacturing process for particular applications; these could cover a wide range of fields, from light-weight structures to electronic hardware. The book will help in problem solving as it also presents more than 100 case studies and failure investigations from the space sector that can, by analogy, be applied to other industries. Difficult-to-find material data is included for reference. The sciences of metallic (primarily) and organic materials presented throughout the book demonstrate how they can be applied as an integral part of spacecraft product assurance schemes, which involve quality, material and processes evaluations, and the selection of mechanical and component parts. In this successor edition, which has been revised and updated, engineering problems associated with critical spacecraft hardware and the space environment are highlighted by over 500 illustrations including micrographs and fractographs. Space hardware captured by astronauts and returned to Earth from long durations in space are examined. Information detailed in the Handbook is applicable to general terrestrial applications including consumer electronics as well as high reliability systems associated with aeronautics, medical equipment and ground transportation. This Handbook is also directed to those involved in maximizing the relia bility of new materials and processes for space technology and space engineering. It will be invaluable to engineers concerned with the construction of advanced structures or mechanical and electronic sub-systems.
Download or read book Polymer Matrix Composites and Technology written by Ru-Min Wang and published by Elsevier. This book was released on 2011-07-14 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. - Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials - Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms - Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies
Download or read book Terra 2008 written by Leslie Rainer and published by Getty Publications. This book was released on 2011-06-14 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthen architecture constitutes one of the most diverse forms of cultural heritage and one of the most challenging to preserve. It dates from all periods and is found on all continents but is particularly prevalent in Africa, where it has been a building tradition for centuries. Sites range from ancestral cities in Mali to the palaces of Abomey in Benin, from monuments and mosques in Iran and Buddhist temples on the Silk Road to Spanish missions in California. This volume's sixty-four papers address such themes as earthen architecture in Mali, the conservation of living sites, local knowledge systems and intangible aspects, seismic and other natural forces, the conservation and management of archaeological sites, research advances, and training.
Download or read book Housing Market Dynamics in Africa written by El-hadj M. Bah and published by Springer. This book was released on 2018-03-12 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book utilizes new data to thoroughly analyze the main factors currently shaping the African housing market. Some of these factors include the supply and demand for housing finance, land tenure security issues, construction cost conundrum, infrastructure provision, and low-cost housing alternatives. Through detailed analysis, the authors investigate the political economy surrounding the continent’s housing market and the constraints that behind-the-scenes policy makers need to address in their attempts to provide affordable housing for the majority in need. With Africa’s urban population growing rapidly, this study highlights how broad demographic shifts and rapid urbanization are placing enormous pressure on the limited infrastructure in many cities and stretching the economic and social fabric of municipalities to their breaking point. But beyond providing a snapshot of the present conditions of the African housing market, the book offers recommendations and actionable measures for policy makers and other stakeholders on how best to provide affordable housing and alleviate Africa’s housing deficit. This work will be of particular interest to practitioners, non-governmental organizations, private sector actors, students and researchers of economic policy, international development, and urban development.
Download or read book China and the International System 1840 1949 written by David Scott and published by State University of New York Press. This book was released on 2008-11-07 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines the images, hopes, and fears that were evoked during China’s century-long subservience to external powers.
Download or read book Handbook Factory Planning and Design written by Hans-Peter Wiendahl and published by Springer. This book was released on 2015-04-20 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook introduces a methodical approach and pragmatic concept for the planning and design of changeable factories that act in strategic alliances to supply the ever-changing needs of the global market. In the first part, the change drivers of manufacturing enterprises and the resulting new challenges are considered in detail with focus on an appropriate change potential. The second part concerns the design of the production facilities and systems on the factory levels work place, section, building and site under functional, organisational, architectural and strategic aspects keeping in mind the environmental, health and safety aspects including corporate social responsibility. The third part is dedicated to the planning and design method that is based on a synergetic interaction of process and space. The accompanying project management of the planning and construction phase and the facility management for the effective utilization of the built premises close the book. The Authors Prof. em. Dr.-Ing. Dr. mult. h.c. Hans-Peter Wiendahl has been director for 23 years of the Institute of Factory planning and Logistics at the Leibniz University of Hannover in Germany. Prof. Dipl.-Ing. Architekt BDA Jürgen Reichardt is Professor at the Muenster school of architecture and partner of RMA Reichardt – Maas – Associate Architects in Essen Germany. Prof. Dr.-Ing. habil. Peter Nyhuis is Managing Director of the Institute of Factory Planning and Logistics at the Leibniz University of Hannover in Germany.
Download or read book Instrument Engineers Handbook Volume 3 written by Bela G. Liptak and published by CRC Press. This book was released on 2018-10-08 with total page 1140 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instrument Engineers' Handbook – Volume 3: Process Software and Digital Networks, Fourth Edition is the latest addition to an enduring collection that industrial automation (AT) professionals often refer to as the "bible." First published in 1970, the entire handbook is approximately 5,000 pages, designed as standalone volumes that cover the measurement (Volume 1), control (Volume 2), and software (Volume 3) aspects of automation. This fourth edition of the third volume provides an in-depth, state-of-the-art review of control software packages used in plant optimization, control, maintenance, and safety. Each updated volume of this renowned reference requires about ten years to prepare, so revised installments have been issued every decade, taking into account the numerous developments that occur from one publication to the next. Assessing the rapid evolution of automation and optimization in control systems used in all types of industrial plants, this book details the wired/wireless communications and software used. This includes the ever-increasing number of applications for intelligent instruments, enhanced networks, Internet use, virtual private networks, and integration of control systems with the main networks used by management, all of which operate in a linked global environment. Topics covered include: Advances in new displays, which help operators to more quickly assess and respond to plant conditions Software and networks that help monitor, control, and optimize industrial processes, to determine the efficiency, energy consumption, and profitability of operations Strategies to counteract changes in market conditions and energy and raw material costs Techniques to fortify the safety of plant operations and the security of digital communications systems This volume explores why the holistic approach to integrating process and enterprise networks is convenient and efficient, despite associated problems involving cyber and local network security, energy conservation, and other issues. It shows how firewalls must separate the business (IT) and the operation (automation technology, or AT) domains to guarantee the safe function of all industrial plants. This book illustrates how these concerns must be addressed using effective technical solutions and proper management policies and practices. Reinforcing the fact that all industrial control systems are, in general, critically interdependent, this handbook provides a wide range of software application examples from industries including: automotive, mining, renewable energy, steel, dairy, pharmaceutical, mineral processing, oil, gas, electric power, utility, and nuclear power.
Download or read book Proceedings of the 8th International Conference on Sciences of Electronics Technologies of Information and Telecommunications SETIT 18 Vol 1 written by Med Salim Bouhlel and published by Springer. This book was released on 2019-07-10 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume book presents an unusually diverse selection of research papers, covering all major topics in the fields of information and communication technologies and related sciences. It provides a wide-angle snapshot of current themes in information and power engineering, pursuing a cross-disciplinary approach to do so. The book gathers revised contributions that were presented at the 2018 International Conference: Sciences of Electronics, Technologies of Information and Telecommunication (SETIT'18), held on 20–22 December 2018 in Hammamet, Tunisia. This eighth installment of the event attracted a wealth of submissions, and the papers presented here were selected by a committee of experts and underwent additional, painstaking revision. Topics covered include: · Information Processing · Human-Machine Interaction · Computer Science · Telecommunications and Networks · Signal Processing · Electronics · Image and Video This broad-scoped approach is becoming increasingly popular in scientific publishing. Its aim is to encourage scholars and professionals to overcome disciplinary barriers, as demanded by current trends in the industry and in the consumer market, which are rapidly leading toward a convergence of data-driven applications, computation, telecommunication, and energy awareness. Given its coverage, the book will benefit graduate students, researchers and practitioners who need to keep up with the latest technological advances.
Download or read book Metadata and Semantics written by Miguel-Angel Sicilia and published by Springer Science & Business Media. This book was released on 2008-10-13 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an edited volume based on the 2007 Conference on Metadata and Semantics Research (MTSR), now in its second meeting. Metadata research is a pluri-disciplinary field that encompasses all aspects of the definition, creation, assessment, management and use of metadata. The volume brings together world class leaders to contribute their research and up-to-date information on metadata and semantics applied to library management, e-commerce, e-business, information science and librarianship, to name a few. The book is designed for a professional audience composed of researchers and practitioners in industry.
Download or read book Enterprise Information Systems Concepts Methodologies Tools and Applications written by Management Association, Information Resources and published by IGI Global. This book was released on 2010-09-30 with total page 2178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This three-volume collection, titled Enterprise Information Systems: Concepts, Methodologies, Tools and Applications, provides a complete assessment of the latest developments in enterprise information systems research, including development, design, and emerging methodologies. Experts in the field cover all aspects of enterprise resource planning (ERP), e-commerce, and organizational, social and technological implications of enterprise information systems.
Download or read book Safeguarding Traditional Cultures written by Peter Seitel and published by . This book was released on 2001 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings from a conference "A global assessment of the 1989 recommendation on the safeguarding of traditional culture and folklore" held at the Smithsonian Institution June 27-30 1999. The purpose of the conference was to assess the implementation of the Recommendation (an international normative instrument adopted by UNESCO in 1989), to bring together points of view and perspectives on the Recommendaion from around the world, and suggest ways in which the Recommendation might develop in the future so that its purpose, the safeguarding of traditional culture and folklore, might be achieved.
Download or read book Metallurgical Assessment of Spacecraft Parts Materials and Processes written by Barrie D. Dunn and published by John Wiley & Sons. This book was released on 1997 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition includes updated case studies, illustrations and failure investigations. Examples and photos include space-part production and test failures in electrical inter-connects, structural welds, and corrosion and storage induced problems.
Download or read book The Quest for Relevant Air Power written by Christian F. Anrig and published by . This book was released on 2012-05-01 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Examines the air power experience of a selected range of European countries since the collapse of the Soviet Union and the Gulf War of 1991. The study offers an assessment of key issues influencing the evolution of air power in continental Europe. Amongst the main challenges are deployed operations, the intellectual grasp of air power doctrine, and the imbalance between combat aircraft and force enablers. Regarding the latter, the development of common capabilities that are equally available to both NATO and the European Union is crucial."--P. [4] of cover.
Download or read book The agile supply chain written by Remko Ivan Hoek and published by Emerald Group Publishing. This book was released on with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the guest editor Remko I. van Hoek, in the field of logistics the debate between the 'lean' thinkers and those who advocate 'agility' is still very much alive. This special issue follows the International Conference on Agility in Helsinki, Finland, and is a collection of some of the best of the fifty papers presented there. The papers touch on agility in regards to forecasting, manufacturing, simulation, ERP and Chinese sourcing. The result is that the concept of agility can be considered as a practical path forward, rather than just a topic of academic debate.
Download or read book Computer Science and its Applications written by Sang-Soo Yeo and published by Springer Science & Business Media. This book was released on 2012-10-19 with total page 962 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 4th FTRA International Conference on Computer Science and its Applications (CSA-12) will be held in Jeju, Korea on November 22~25, 2012. CSA-12 will be the most comprehensive conference focused on the various aspects of advances in computer science and its applications. CSA-12 will provide an opportunity for academic and industry professionals to discuss the latest issues and progress in the area of CSA. In addition, the conference will publish high quality papers which are closely related to the various theories and practical applications in CSA. Furthermore, we expect that the conference and its publications will be a trigger for further related research and technology improvements in this important subject. CSA-12 is the next event in a series of highly successful International Conference on Computer Science and its Applications, previously held as CSA-11 (3rd Edition: Jeju, December, 2011), CSA-09 (2nd Edition: Jeju, December, 2009), and CSA-08 (1st Edition: Australia, October, 2008).
Download or read book Technologies for economic and functional lightweight design written by Klaus Dröder and published by Springer Vieweg. This book was released on 2022-03-12 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the proceedings of the conference “Future Production of Hybrid Structures 2020”, which took place in Wolfsburg. The conference focused on hybrid lightweight design, which is characterized by the combination of different materials with the aim of improving properties and reducing weight. In particular, production technologies for hybrid lightweight design were discussed, new evaluation methods for the ecological assessment of hybrid components were presented and future-oriented approaches motivated by nature for the development of components, assemblies and systems were introduced. Lightweight design is a key technology for the development of sustainable and resource-efficient mobility concepts. Vehicle manufacturers operate in an area of conflict between customer requirements, competition and legislation. Material hybrid structures, which combine the advantages of different materials, have a high potential for reducing weight, while simultaneously expanding component functionality. The future, efficient use of function-integrated hybrid structures in vehicle design requires innovations and constant developments in vehicle and production technology. There is a great demand, especially with regard to new methods and technologies, for "affordable" lightweight construction in large-scale production, taking into account the increasing requirements with regard to variant diversity, safety and quality.
Download or read book The Elements of Public Speaking written by Joseph A. DeVito and published by Allyn & Bacon. This book was released on 2000 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elements of Public Speaking, 7e, provides a highly engaging and comprehensive survey of public speaking in a flexible format adaptable to a variety of classrooms. The major themes of the new edition are its integrated coverage of new technology, inclusion of ethics, emphasis on listening, expanded coverage of culture and gender, and continued coverage of critical thinking.
