Download or read book One Dimensional Design of Centrifugal Compressors written by P. Frigne and published by . This book was released on 1978 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book One dimensional design of centrifugal compressors written by W. Bex and published by . This book was released on 1969 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Centrifugal Compressors written by Ronald H. Aungier and published by American Society of Mechanical Engineers. This book was released on 2000 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: A mechanical engineer with a Pennsylvania turbomachinery company, A ungier describes his own system and strategy for designing and analyzing centrifugal compressor aerodynamics. To address the novice as well as the experienced in the field, he presents the basic thermodynamic and fluid dynamic principles, empirical models, and key numerical methods that form the basis of his methods. His strategy, or design practice, he found harder to describe because it involves a process of reasoning rather than following an established set of principles. He recognizes that his is only one of many possible methods, but makes no effort to compare or contrast his with any other.
Download or read book Design and Analysis of Centrifugal Compressors written by Rene Van den Braembussche and published by John Wiley & Sons. This book was released on 2019-01-14 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of fluid dynamic models and experimental results that can help solve problems in centrifugal compressors and modern techniques for a more efficient aerodynamic design. Design and Analysis of Centrifugal Compressors isacomprehensive overview of the theoretical fluid dynamic models describing the flow in centrifugal compressors and the modern techniques for the design of more efficient centrifugal compressors. The author — a noted expert in the field, with over 40 years of experience — evaluates relevant numerical and analytical prediction models for centrifugal compressors with special attention to their accuracy and limitations. Relevant knowledge from the last century is linked with new insights obtained from modern CFD. Emphasis is to link the flow structure, performance and stability to the geometry of the different compressor components. Design and Analysis of Centrifugal Compressors is an accessible resource that combines theory with experimental data and previous research with recent developments in computational design and optimization. This important resource Covers the basic information concerning fluid dynamics that are specific for centrifugal compressors and clarifies the differences with axial compressors Provides an overview of performance prediction models previously developed in combination with extra results from research conducted by the author Describes helpful numerical and analytical models for the flow in the different components in relation to flow stability, operating range and performance Includes the fundamental information for the aerodynamic design of more efficient centrifugal compressors Explains the use of computational fluid dynamics (CFD) for the design and analysis of centrifugal compressors Written for engineers, researchers and designers in industry as well as for academics specializing in the field, Design and Analysis of Centrifugal Compressors offers an up to date overview of the information needed for the design of more effective centrifugal compressors.
Download or read book The Centrifugal Compressor Stage written by Thomas Barker Ferguson and published by . This book was released on 1963 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Development of Low flow Coefficient Centrifugal Compressors for Industrial Application written by Jean-Luc Di Liberti and published by . This book was released on 1998 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Process Centrifugal Compressors written by Klaus H. Lüdtke and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originating in the process compressor industry, this text primarily addresses: rotating equipment engineers, project engineers, engineering contractors, and compressor user companies in oil and gas field operations, natural gas processing, petroleum refining, petrochemical processing, industrial refrigeration, and chemical industries. It enables the reader to assess compressors and defines the constraints influencing the compressor design.
Download or read book Radial Flow Turbocompressors written by Michael Casey and published by Cambridge University Press. This book was released on 2021-06-10 with total page 789 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the theory and engineering practice that underpins the component design and analysis of radial flow turbocompressors. Drawing upon an extensive theoretical background and years of practical experience, the authors provide descriptions of applications, concepts, component design, analysis tools, performance maps, flow stability, and structural integrity, with illustrative examples. Features wide coverage of all types of radial compressor over many applications unified by the consistent use of dimensional analysis. Discusses the methods needed to analyse the performance, flow, and mechanical integrity that underpin the design of efficient centrifugal compressors with good flow range and stability. Includes explanation of the design of all radial compressor components, including inlet guide vanes, impellers, diffusers, volutes, return channels, de-swirl vanes and side-streams. Suitable as a reference for advanced students of turbomachinery, and a perfect tool for practising mechanical and aerospace engineers already within the field and those just entering it.
Download or read book Design of Radial Turbomachines written by A. Whitfield and published by Longman. This book was released on 1990 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past three decades advances have been made in the fluid dynamic and thermodynamic design and understanding of radial flow turbomachines. Radial turbomachines possess their own distinctive characteristics, and present the engineer with as full a range of complexities as any fluid flow problem. This book describes the current technology and design methods for centrifugal compressors and radial turbines working in compressible flow. These are of particular relevance to gas turbine engines, internal combustion engine turbochargers, process compressors and cryogenic expanders. The aerodynamic design of the turbomachine is preliminary design to the specification of blade forms and computational fluid dynamic analysis of vane and blade passage flows. The treatment throughout is modern, with full recognition of current computer-aided design methods. However throughout the book a clear separation is made between the fundamental gas dynamics and the empiricism necessary to close the gap between theory and practice in situations of such complexity. Computer program listings for preliminary design are included. The problems posed by specific applications are dealt with in details: for example, techniques for the suppression of surge in centrifugal compressors and a consequent widening of the operating range, and the problems of pulse operation of radial turbines as encountered in turbocharger applications. The book contains comprehensive surveys of the literature in all these fields.
Download or read book Two dimensional Compressible Flow in Centrifugal Compressors with Straight Blades written by John D. Stanitz and published by . This book was released on 1949 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: Six numerical examples are presented for steady, two-dimensional, compressible, nonviscous flow in centrifugal compressors with straight blades. A seventh example is presented for incompressible flow. The solutions also applye to radial-flow turbines with rotation and flow direction reversed. The effects of variations in following parameters were investigated: (1) flow rate, (2) impeller-tip speed, (3) variation of passage height with radius, and (4) number of blades. The numerical results are presented in plots of the streamlines, constant Mach number lines, and constant pressure-ratio lines. Correlation equations are developed whereby the flow conditions in any impeller with straight blades can be determined for all operating conditions.
Download or read book Design and Analysis of Centrifugal Compressors written by Rene Van den Braembussche and published by John Wiley & Sons. This book was released on 2019-04-08 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of fluid dynamic models and experimental results that can help solve problems in centrifugal compressors and modern techniques for a more efficient aerodynamic design. Design and Analysis of Centrifugal Compressors isacomprehensive overview of the theoretical fluid dynamic models describing the flow in centrifugal compressors and the modern techniques for the design of more efficient centrifugal compressors. The author — a noted expert in the field, with over 40 years of experience — evaluates relevant numerical and analytical prediction models for centrifugal compressors with special attention to their accuracy and limitations. Relevant knowledge from the last century is linked with new insights obtained from modern CFD. Emphasis is to link the flow structure, performance and stability to the geometry of the different compressor components. Design and Analysis of Centrifugal Compressors is an accessible resource that combines theory with experimental data and previous research with recent developments in computational design and optimization. This important resource Covers the basic information concerning fluid dynamics that are specific for centrifugal compressors and clarifies the differences with axial compressors Provides an overview of performance prediction models previously developed in combination with extra results from research conducted by the author Describes helpful numerical and analytical models for the flow in the different components in relation to flow stability, operating range and performance Includes the fundamental information for the aerodynamic design of more efficient centrifugal compressors Explains the use of computational fluid dynamics (CFD) for the design and analysis of centrifugal compressors Written for engineers, researchers and designers in industry as well as for academics specializing in the field, Design and Analysis of Centrifugal Compressors offers an up to date overview of the information needed for the design of more effective centrifugal compressors.
Download or read book One dimensional Compressible Flow in Vaneless Diffusers of Radial and Mixed flow Centrifugal Compressors Including Effects of Friction Heat Transfer and Area Change written by John D. Stanitz and published by . This book was released on 1952 with total page 61 pages. Available in PDF, EPUB and Kindle. Book excerpt: An analysis method and a design method are developed for one-dimensional, compressible flow with friction, heat transfer, and area change in vaneless diffusers with arbitrary profiles in the axial-radial plane. In the analyis method the varations in fluid properties are determined as a function of radius for a prescribed variation in diffuser wall spacing with radius. In the design method the variation in effective diffuser wall spacing is determined as a function of radius for an arbitrary prescribed variation in one fluid property. As a result of numerical examples it is concluded that: (1) The friction losses in most vaneless diffuser designs are considerable and these losses result from the usually large ratios of wetted surface to flow area in vaneless diffusers. (2) Vaneless diffuser efficiencies can be improved by increased compressor flow rates for a given impeller tip radius.
Download or read book Gas Turbines for Electric Power Generation written by S. Can Gülen and published by Cambridge University Press. This book was released on 2019-02-14 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: Everything you wanted to know about industrial gas turbines for electric power generation in one source with hard-to-find, hands-on technical information.
Download or read book The Development of a Centrifugal Compressor One dimensional Optimisation Program written by C. K. G. Lam and published by . This book was released on 1975 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Axial flow Compressors written by Ronald H. Aungier and published by American Society of Mechanical Engineers. This book was released on 2003 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough description of an aerodynamic design and analysis systems for Axial-Flow Compressors. It describes the basic fluid dynamic and thermodynamic principles, empirical models and numerical methods used for the full range of procedures and analytical tools that an engineer needs for virtually any tupe of Axial-Flow Compressor, aerodynamic design or analysis activity. It reviews and evaluates several design strategies that have been recommended in the literature or which have been found to be effective. It gives a complete description of an actual working system, such that readers can implement all or part of the system. Engineers responsible for developing, maintaining of improving design and analysis systems can benefit greatly from this type of reference. The technology has become so complex and the role of computers so pervasive that about the only way this can be done today is to concentrate on a specific design and analysis system. The author provides practical methodology as well as the details needed to implement the suggested procedures.
Download or read book Aerodynamic Design of Axial flow Compressors written by Lewis Research Center and published by . This book was released on 1965 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 14th International Conference on Turbochargers and Turbocharging written by Institution of Mechanical Engineers and published by CRC Press. This book was released on 2020-09-30 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: 14th International Conference on Turbochargers and Turbocharging addresses current and novel turbocharging system choices and components with a renewed emphasis to address the challenges posed by emission regulations and market trends. The contributions focus on the development of air management solutions and waste heat recovery ideas to support thermal propulsion systems leading to high thermal efficiency and low exhaust emissions. These can be in the form of internal combustion engines or other propulsion technologies (eg. Fuel cell) in both direct drive and hybridised configuration. 14th International Conference on Turbochargers and Turbocharging also provides a particular focus on turbochargers, superchargers, waste heat recovery turbines and related air managements components in both electrical and mechanical forms.
