Download or read book On the Use of Potential Theory for Thermal Modeling in Metal Cutting written by Matthias Brockmann and published by Apprimus Wissenschaftsverlag. This book was released on 2016-01-20 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: Evolving temperature distributions during metal cutting are of major significance. Present analytical models are not capable to predict temperature fields to a sufficient degree. This lack of model validity is caused by the limited mathematical approaches. The present thesis deals with the development of methodologies for thermal modeling based on a class of complex functions termed potential functions. This approach has never been used before for metal cutting applications.
Download or read book Thermal Analysis of the Milling Process written by Thorsten Augspurger and published by Apprimus Wissenschaftsverlag. This book was released on 2018-12-21 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the current work was the analysis of temperatures in the milling process in order to understand causal and statistical relationships between process parameters and thermal state variables. The first step included fundamental empirical investigations in the form of orthogonal cuts in order to estimate the heat partitioning depending on the process parameters. Based on the empirical data from the orthogonal cuts temperature fields in the milling process were modelled analytically and validated.
Download or read book Thermo energetic Design of Machine Tools written by Knut Großmann and published by Springer. This book was released on 2014-11-06 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: The approach to the solution within the CRC/TR 96 financed by the German Research Foundation DFG aims at measures that will allow manufacturing accuracy to be maintained under thermally unstable conditions with increased productivity, without an additional demand for energy for tempering. The challenge of research in the CRC/TR 96 derives from the attempt to satisfy the conflicting goals of reducing energy consumption and increasing accuracy and productivity in machining. In the current research performed in 19 subprojects within the scope of the CRC/TR 96, correction and compensation solutions that influence the thermo-elastic machine tool behaviour efficiently and are oriented along the thermo-elastic functional chain are explored and implemented. As part of this general objective, the following issues must be researched and engineered in an interdisciplinary setting and brought together into useful overall solutions: 1. Providing the modelling fundamentals to calculate the heat fluxes and the resulting thermo-elastic deformations in a comprehensive manner, 2. Mapping of the structural variability as a result of the relative movement inside the machine tool, 3. Providing the tools for an efficient adjustment of parameters that vary greatly in time and space by means of parameter identification methods as a prerequisite for correction and compensation solutions, 4. Engineering and demonstrating solutions to control-integrated correction of thermo-elastic errors by an inverse position setpoint compensation of the error at the TCP, 5. Engineering and demonstrating solutions based on the material properties to compensate for thermo-elastic effects through a homogeneous propagation of the temperature field, as well as reducing and smoothing the distribution of heat dissipated in supporting structures, 6. Developing metrological fundamentals to record the thermo-elastic errors in special structural areas of machine tools, 7. Engineering a methodological approach to simultaneous and complex evaluation of the CRC/TR 96 solutions, referring to their impact on product quality, production rate, energy consumption and machine tool costs
Download or read book Metal Cutting Theory and Practice written by David A. Stephenson and published by CRC Press. This book was released on 2005-12-02 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal cutting applications span the entire range from mass production to mass customization to high-precision, fully customized designs. The careful balance between precision and efficiency is maintained only through intimate knowledge of the physical processes, material characteristics, and technological capabilities of the equipment and workpieces involved. The best-selling first edition of Metal Cutting Theory and Practice provided such knowledge, integrating timely research with current industry practice. This brilliant reference enters its second edition with fully updated coverage, new sections, and the inclusion of examples and problems. Supplying complete, up-to-date information on machine tools, tooling, and workholding technologies, this second edition stresses a physical understanding of machining processes including forces, temperatures, and surface finish. This provides a practical basis for troubleshooting and evaluating vendor claims. In addition to updates in all chapters, the book features three new chapters on cutting fluids, agile and high-throughput machining, and design for machining. The authors also added examples and problems for additional hands-on insight. Rounding out the treatment, an entire chapter is devoted to machining economics and optimization. Endowing you with practical knowledge and a fundamental understanding of underlying physical concepts, Metal Cutting Theory and Practice, Second Edition is a necessity for designing, evaluating, purchasing, and using machine tools.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Machining Processes of Metallic Materials written by Wit Grzesik and published by Elsevier. This book was released on 2016-11-15 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Machining Processes of Metallic Materials: Theory, Modelling and Applications, Second Edition, explores the metal cutting processes with regard to theory and industrial practice. Structured into three parts, the first section provides information on the fundamentals of machining, while the second and third parts include an overview of the effects of the theoretical and experimental considerations in high-level machining technology and a summary of production outputs related to part quality. In particular, topics discussed include: modern tool materials, mechanical, thermal and tribological aspects of machining, computer simulation of various process phenomena, chip control, monitoring of the cutting state, progressive and hybrid machining operations, as well as practical ways for improving machinability and generation and modeling of surface integrity. This new edition addresses the present state and future development of machining technologies, and includes expanded coverage on machining operations, such as turning, milling, drilling, and broaching, as well as a new chapter on sustainable machining processes. In addition, the book provides a comprehensive description of metal cutting theory and experimental and modeling techniques, along with basic machining processes and their effective use in a wide range of manufacturing applications. The research covered here has contributed to a more generalized vision of machining technology, including not only traditional manufacturing tasks, but also potential (emerging) new applications, such as micro and nanotechnology. Includes new case studies illuminate experimental methods and outputs from different sectors of the manufacturing industry Presents metal cutting processes that would be applicable for various technical, engineering, and scientific levels Includes an updated knowledge of standards, cutting tool materials and tools, new machining technologies, relevant machinability records, optimization techniques, and surface integrity
Download or read book Property and Energy Conversion Technology of Solid Composite Sorbents written by Liwei Wang and published by Springer Nature. This book was released on 2021-04-01 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid chemisorption technology is an effective form of energy conversion for recovering low-grade thermal energy, but limited thermal conductivity and agglomeration phenomena greatly limit its performance. Over the past 20 years, researchers have explored the use of thermal conductive porous matrix to improve heat and mass transfer performance. Their efforts have yielded composite sorption technology, which is now extensively being used in refrigeration, heat pumps, energy storage, and de-NOx applications. This book reviews the latest technological advances regarding composite solid sorbents. Various development methods are introduced and compared, kinetic models are presented, and different cycles are analyzed. Given its scope, the book will benefit experts involved in developing novel materials and cycles for energy conversion, as well as engineers working to develop effective commercialized energy conversion systems based on solid sorption technology
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1952 with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Machining written by P.R.N. Childs and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal machining is the most widespread metal-shaping process in the mechanical manufacturing industry. World-wide investment in metal machining tools increases year on year - and the wealth of nations can be judged by it. This text - the most up-to-date in the field - provides in-depth discussion of the theory and application of metal machining at an advanced level. It begins with an overview of the development of metal machining and its role in the current industrial environment and continues with a discussion of the theory and practice of machining. The underlying mechanics are analysed in detail and there are extensive chapters examining applications through a discussion of simulation and process control. "Metal Machining: Theory and Applications" is essential reading for senior undergraduates and postgraduates specialising in cutting technology. It is also an invaluable reference tool for professional engineers. Professors Childs, Maekawa, Obikawa and Yamane are four of the leading authorities on metal machining and have worked together for many years. Of interest to all mechanical, manufacturing and materials engineers Theoretical and practical problems addressed
Download or read book Mechanical Engineering written by and published by . This book was released on 1981-06 with total page 910 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Sustainable Manufacturing written by Günther Seliger and published by Springer Science & Business Media. This book was released on 2011-05-27 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-renewable materials can no longer be disposed once humankind's ever increasing needs cannot be fulfilled anymore due to limited resources. Reuse and recycling become inevitable requirements for product and process design. Renewable resources must not be consumed in quantities higher than can be regained. New technologies have to be developed and applied for a Sustainable Product Development and Life Cycle Engineering to fulfill the needs of humankind, protecting public health, welfare, and environment. The 8th Global Conference on Sustainable Manufacturing brings together some of the world’s leading experts to present a scientific conference in Abu Dhabi, one of the world’s fastest growing economies and a global leader in the development of sustainable technologies. The conference will focus on 7 areas: Value adding by sustainable manufacturing in the UAE Potentials of renewables Education for sustainability engineering Green supply chain and transportation Microelectronics and resource efficiency Technology driven startups Sustainable products and manufacturing processes
Download or read book Tribology of Metal Cutting written by Viktor P. Astakhov and published by Elsevier. This book was released on 2006-12-18 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text attempts to provide specialists in the field of metal cutting with information on how to apply the major ideas of metal cutting tribology, or, in other words, how to make metal cutting tribology useful at various levels.
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1967 with total page 978 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book U S Government Research Development Reports written by and published by . This book was released on 1969-10 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Cutting written by Edward M. Trent and published by Elsevier. This book was released on 2015-06-02 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expanded and revised to include changes and additions to metal cutting theory. Covers developments in tool materials and industrial practice over the last seven years. Describes the stresses and temperatures acting on cutting tools and explains theirinfluence on performance. Discusses tool wear which determines cutting efficiency. Details machinability and control of tool material structure and composition.
Download or read book Metals Abstracts written by and published by . This book was released on 1999 with total page 1014 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book U S Government Research and Development Reports written by and published by . This book was released on 1969-10 with total page 1340 pages. Available in PDF, EPUB and Kindle. Book excerpt:
