Download or read book On the role of metal support interactions in methanol synthesis and oxidation written by Kevin Kähler and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Catalysis written by James Spivey and published by Royal Society of Chemistry. This book was released on 2020-02-05 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalysts are required for a variety of applications and researchers are increasingly challenged to find cost effective and environmentally benign catalysts to use. This volume looks at modern approaches to catalysis and reviews the extensive literature. Chapters highlight reactions active under oxidative coupling of methane conditions and how they are interlinked, heterogeneous nickel catalysts and their use in laboratory and industry, the reaction mechanism of heterogeneous catalysis with the surface science probe, the concepts of electroless deposition (ED) methods for preparation of true bimetallic catalysts, the general subject of metal-support interactions occurring over ruthenium-based catalysts and benzene as the target volatile organic compound (VOC). Appealing broadly to researchers in academia and industry, these illustrative chapters bridge the gap from academic studies in the laboratory to practical applications in industry not only for catalysis field but also for environmental protection. The book will be of great benefit to any researcher wanting a succinct reference on developments in this area now and looking to the future.
Download or read book Strong Metal support Interactions written by R. T. K. Baker and published by . This book was released on 1986 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Support and Metal Additive Effects in Catalysis written by B. Imelik and published by Elsevier. This book was released on 2000-04-01 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal-Support and Metal-Additive Effects in Catalysis, Volume 11, documents the proceedings of an international symposium organized by the Institut de Recherches sur la Catalyse - CNRS – Villeurbanne and sponsored by the Centre National de la Recherche Scientifique, Ecully (Lyon), September 14-16, 1982. This volume contains 40 manuscripts that cover a wide range of topics. Among these are studies of metal-support interactions involving Pt/Al2O3, Pt/TiO2,Fe/TiO2, Pt/MgO, Rh /Al2O3, and Pt/CeO2 catalysts. There are also separate chapters dealing with ethane, n-butane, and cyclohexane hydrogenolysis; skeletal isomerization of methylpentanes; the catalytic activity and selectivity of noble metals; CO hydrogenation over supported on SiO2, Al2O3, Ti O2,and Zr O2 nickel catalysts; and the role of promoters in Pd catalysts for methanol synthesis. Subsequent chapters cover the poisoning of platinum and nickel by sulfur; C6H6 and CO chemisorption on Pt78Ni22 (111) single crystal alloy; the surface composition of industrial ammonia synthesis catalysts; and the role of alkalis and electronegative promoters on Fe and Ni catalysts.
Download or read book Methanol Synthesis written by Jerzy Skrzypek and published by . This book was released on 1994 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effects of Metal Support Interactions on the Synthesis of Methanol Over Palladium written by and published by . This book was released on 1980 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: The synthesis of methanol and other products from CO and H2 was studied over Pd catalysts prepared by adsorption of Pd([pi]-C3H5)2 on MgO, ZnO, La2O3, [gamma]-Al2O3, SiO2, TiO2, and ZrO2 as well as over a SiO2-supported Pd catalyst prepared from PdCl2 and Pd black. Both the activity and selectivity of Pd were affected strongly by the nature of the support and the composition of the Pd precursor. The specific activity for methanol synthesis decreased in the order Pd/La2O3” Pd/SiO2 [derived from PdCl2]> Pd/ZrO2> Pd/ZnO ~ Pd/MgO> PdTiO2> Pd/Al2O3 ~ Pd/SiO2 [derived from Pd([pi]-C3H5)2]” Pd black while the specific activity for hydrocarbon synthesis decreased in the order Pd/TiO2> Pd/ZrO2> Pd/La2O3> Pd/Al2O3 ~ Pd/SiO2 [derived from PdCl2]> Pd/SiO2 [derived from Pd([pi]-C3H5)2] ~ Pd black” Pd/MgO> Pd/ZnO. Dimethyl ether production was observed over four of the catalysts and the activity for formation of this product decreased in the order Pd/Al2O3” Pd/TiO2” Pd/MgO ~ Pd/ZrO2. The effects of support composition on the catalytic properties of Pd are discussed in the light of current ideas concerning metal-support interactions and the acid-base properties of the support.
Download or read book Catalyst Characterization written by Boris Imelik and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: to the Fundamental and Applied Catalysis Series Catalysis is important academically and industrially. It plays an essential role in the manufacture of a wide range of products, from gasoline and plastics to fertilizers and herbicides, which would otherwise be unobtainable or prohibitive ly expensive. There are few chemical-or oil-based material items in modern society that do not depend in some way on a catalytic stage in their manufacture. Apart from manufacturing processes, catalysis is finding other important and over-increasing uses; for example, successful applications of catalysis in the control ofpollution and its use in environmental control are certain to in crease in the future. The commercial import an ce of catalysis and the diverse intellectual challenges of catalytic phenomena have stimulated study by a broad spectrum of scientists including chemists, physicists, chemical engineers, and material scientists. Increasing research activity over the years has brought deeper levels of understanding, and these have been associated with a continually growing amount of published material. As recentlyas sixty years ago, Rideal and Taylor could still treat the subject comprehensively in a single volume, but by the 19 50s Emmett required six volumes, and no conventional multivolume text could now cover the whole of catalysis in any depth.
Download or read book Preparation of Solid Catalysts written by Gerhard Ertl and published by John Wiley & Sons. This book was released on 2008-08-29 with total page 639 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid catalysts play a fundamental role in all areas between basic research and industrial applications. This book offers a large amount of information about the preparation of solid catalysts. All types of solid catalysts and all important aspects of their preparation are discussed. The highly topical contributions are written by leading experts in disciplines ranging from solid state, interface and solution chemistry to industrial engineering. The straightforward presentation of the material and the comprehensive coverage make this book an essential and indispensible tool for every scientist and engineer working with solid catalysts.
Download or read book Hydrogenation of CO2 to Methanol written by and published by . This book was released on 2015 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this study, the high thermochemical stability of CO2 makes it very difficult to achieve the catalytic conversion of the molecule into alcohols or other hydrocarbon compounds, which can be used as fuels or the starting point for the generation of fine chemicals. Pure metals and bimetallic systems used for the CO2 → CH3OH conversion usually bind CO2 too weakly and, thus, show low catalytic activity. Here, we discuss a series of recent studies that illustrate the advantages of metal-oxide and metal-carbide interfaces when aiming at the conversion of CO2 into methanol. CeOx/Cu(111), Cu/CeOx/TiO2(110), and Au/CeOx/TiO2(110) exhibit an activity for the CO2 → CH3OH conversion that is 2-3 orders of magnitude higher than that of a benchmark Cu(111) catalyst. In the Cu-ceria and Au-ceria interfaces, the multifunctional combination of metal and oxide centers leads to complementary chemical properties that open active reaction pathways for methanol synthesis. Efficient catalysts are also generated after depositing Cu and Au on TiC(001). In these cases, strong metal-support interactions modify the electronic properties of the admetals and make them active for the binding of CO2 and its subsequent transformation into CH3OH at the metal-carbide interfaces.
Download or read book Plasma Catalysis written by Annemie Bogaerts and published by MDPI. This book was released on 2019-04-02 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma catalysis is gaining increasing interest for various gas conversion applications, such as CO2 conversion into value-added chemicals and fuels, N2 fixation for the synthesis of NH3 or NOx, methane conversion into higher hydrocarbons or oxygenates. It is also widely used for air pollution control (e.g., VOC remediation). Plasma catalysis allows thermodynamically difficult reactions to proceed at ambient pressure and temperature, due to activation of the gas molecules by energetic electrons created in the plasma. However, plasma is very reactive but not selective, and thus a catalyst is needed to improve the selectivity. In spite of the growing interest in plasma catalysis, the underlying mechanisms of the (possible) synergy between plasma and catalyst are not yet fully understood. Indeed, plasma catalysis is quite complicated, as the plasma will affect the catalyst and vice versa. Moreover, due to the reactive plasma environment, the most suitable catalysts will probably be different from thermal catalysts. More research is needed to better understand the plasma–catalyst interactions, in order to further improve the applications.
Download or read book Beyond Oil and Gas written by George A. Olah and published by John Wiley & Sons. This book was released on 2011-08-24 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world is currently consuming about 85 million barrels of oil a day, and about two-thirds as much natural gas equivalent, both derived from non-renewable natural sources. In the foreseeable future, our energy needs will come from any available alternate source. Methanol is one such viable alternative, and also offers a convenient solution for efficient energy storage on a large scale. In this updated and enlarged edition, renowned chemists discuss in a clear and readily accessible manner the pros and cons of humankind's current main energy sources, while providing new ways to overcome obstacles. Following an introduction, the authors look at the interrelationship of fuels and energy, and at the extent of our non-renewable fossil fuels. They also discuss the hydrogen economy and its significant shortcomings. The main focus is on the conversion of CO2 from industrial as well as natural sources into liquid methanol and related DME, a diesel fuel substitute that can replace LNG and LPG. The book is rounded off with an optimistic look at future possibilities. A forward-looking and inspiring work that vividly illustrates potential solutions to our energy and environmental problems.
Download or read book Theoretical Study of the Methanol Synthesis on Cu ZnO Catalysts written by Luis Martínez-Suárez and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Supported Metals in Catalysis written by James Arthur Anderson and published by World Scientific. This book was released on 2012 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from experts in supported metal catalysis, from both the industry and academia, this book presents the latest developments in characterization and application of supported metals in heterogeneous catalysis. In addition to a thorough and updated coverage of the traditional aspects of heterogeneous catalysis such as preparation, characterization and use in well-established technologies such as Naphtha reforming, the book also includes emerging areas where supported metal catalysis will make significant contributions in future developments, such as fuel cells and fine chemicals synthesis. The second edition of Supported Metals in Catalysis comes complete with new and updated chapters containing important summaries of research in a rapidly evolving field. Very few other books deal with this highly pertinent subject matter, and as such, it is a must-have for anyone working in the field of heterogeneous catalysis.
Download or read book Methanol The Basic Chemical and Energy Feedstock of the Future written by Martin Bertau and published by Springer Science & Business Media. This book was released on 2014-02-18 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methanol - The Chemical and Energy Feedstock of the Future offers a visionary yet unbiased view of methanol technology. Based on the groundbreaking 1986 publication "Methanol" by Friedrich Asinger, this book includes contributions by more than 40 experts from industry and academia. The authors and editors provide a comprehensive exposition of methanol chemistry and technology which is useful for a wide variety of scientists working in chemistry and energy related industries as well as academic researchers and even decision-makers and organisations concerned with the future of chemical and energy feedstocks.
Download or read book Surface Organometallic Chemistry Molecular Approaches to Surface Catalysis written by Jean-Marie Basset and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface organometallic chemistry is a new field bringing together researchers from organometallic, inorganic, and surface chemistry and catalysis. Topics ranging from reaction mechanisms to catalyst preparation are considered from a molecular basis, according to which the "active site" on a catalyst surface has a supra-molecular character. This. the first book on the subject, is the outcome of a NATO Workshop held in Le Rouret. France, in May. 1986. It is our hope that the following chapters and the concluding summary of recommendations for research may help to provide a definition of surface organometallic chemistry. Besides catalysis. the central theme of the Workshop, four main topics are considered: 1) Reactions of organometallics with surfaces of metal oxides, metals. and zeolites; 2) Molecular models of surfaces, metal oxides, and metals; 3) Molecular approaches to the mechanisms of surface reactions; 4) Synthesis and modification of zeolites and related microporous solids. Most surface organometallic chemistry has been carried out on amorphous high-surf ace-area metal oxides such as silica. alumina. magnesia, and titania. The first chapter. contributed by KNOZINGER. gives a short summary of the structure and reactivity of metal oxide surfaces. Most of our understanding of these surfaces is based on acid base and redox chemistry; this chemistry has developed from X-ray and spectroscopic data, and much has been inferred from the structures and reactivities of adsorbed organic probe molecules. There are major opportunities for extending this understanding by use of well-defined (single crystal) oxide surfaces and organometallic probe molecules.
Download or read book Surface Analysis of Cu ZnO Catalysts for Methanol Synthesis a Study on Nitrous Oxide Chemisorption and DRIFT Spectroscopy written by Samuel M. Fehr and published by . This book was released on 2021 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Catalysis of Organic Reactions written by Robert L. Augustine and published by CRC Press. This book was released on 2020-09-10 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a complete updating of important developments in the study of catalysis as it applies to organic synthesis — with applications in major industrial processes. It covers a broad variety of catalytic processes — both homogeneous and heterogeneous.
