Download or read book Resistivity and Induced Polarization written by Andrew Binley and published by Cambridge University Press. This book was released on 2020-12-17 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive text on resistivity and induced polarization covering theory and practice for the near-surface Earth supported by modelling software.
Download or read book Geotechnical and Environmental Geophysics Environmental and groundwater written by Stanley H. Ward and published by . This book was released on 1990 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles of Induced Polarization for Geophysical Exploration written by J.S. Sumner and published by Elsevier. This book was released on 2012-12-02 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in Economic Geology, 5: Principles of Induced Polarization for Geophysical Exploration focuses on the principles, methodologies, and approaches involved in induced polarization (IP), including anisotropism, electromagnetic coupling, and electrical circuits. The book first takes a look at resistivity principles, theory of IP, and laboratory work in IP. Concerns cover electrical measurements of rocks, anisotropism, early part of decay curve and the comparison with frequency effects, electrical models of induced polarization, electrical polarization, resistivities of earth materials, and resistivity exploration methods. The manuscript then elaborates on IP field equipment, telluric noise and electromagnetic coupling, IP field surveying, and drill-hole and underground surveying and the negative IP effect. Discussions focus on differences between surface and subsurface methods, current-sending system in the field, telluric (earth) currents, electromagnetic coupling, design considerations, coupling of electrical circuits, design considerations, and signal-generating system. The manuscript ponders on the complex-resistivity method and interpretation of induced-polarization data, including grade estimation of mineralization using the IP method, complex-resistivity survey, signal detection capabilities of the complex-resistivity method, and disadvantages of the complex-resistivity method. The text is a valuable source of information for researchers wanting to study induced polarization.
Download or read book Tomographic Inversion of Complex Resistivity written by Andreas Kemna and published by . This book was released on 2000 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Induced Polarization written by James B. Fink and published by . This book was released on 1990 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theory and Application of Spectral Induced Polarization written by Yanzhang Luo and published by SEG Books. This book was released on 1998 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors review spectral induced polarization theory and describe some of the SIP method's applications through a discussion of their research in the People's Republic of China. In the first of four chapters, they discuss the electrochemical basis of SIP, offering proof of the validity of using the Cole-Cole model for describing complex resistivity spectra. In the next chapter, which addresses the SIP forward problem, they describe the scale-modeling laws for SIP, various forward algorithms, the behavior and variation laws of SIP anomalies, and effective SIP parameters. The third chapter discusses SIP inversion methods, including several methods of calculating the intrinsic spectral parameters of a polarizable body. In the final chapter, the authors describe their field tests applying the SIP method to prospecting for orebodies and oil and gas reservoirs. The material is introduced in part through a reprinting of a 1959 paper by Volume Editor James R. Wait titled 'The Variable Frequency Method."
Download or read book The Self Potential Method written by André Revil and published by Cambridge University Press. This book was released on 2013-07-11 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: The self-potential method enables non-intrusive assessment and imaging of disturbances in electrical currents of conductive subsurface materials. It has an increasing number of applications, from mapping fluid flow in the subsurface of the Earth to detecting preferential flow paths in earth dams and embankments. This book provides the first full overview of the fundamental concepts of this method and its applications in the field. It discusses the historical perspective, laboratory investigations undertaken, the inverse problem and seismoelectric coupling, and concludes with the application of the self-potential method to geohazards, water resources and hydrothermal systems. Chapter exercises, online datasets and analytical software enable the reader to put the theory into practice. This book is a key reference for academic researchers and professionals working in the areas of geophysics, environmental science, hydrology and geotechnical engineering. It will also be valuable reading for related graduate courses.
Download or read book Near Surface Applied Geophysics written by Mark E. Everett and published by Cambridge University Press. This book was released on 2013-04-25 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Just a few meters below the Earth's surface lie features of great importance, from geological faults which can produce devastating earthquakes, to lost archaeological treasures. This refreshing, up-to-date book explores the foundations of interpretation theory and the latest developments in near-surface techniques, used to complement traditional geophysical methods for deep-exploration targets. Clear but rigorous, the book explains theory and practice in simple physical terms, supported by intermediate-level mathematics. Techniques covered include magnetics, resistivity, seismic reflection and refraction, surface waves, induced polarization, self-potential, electromagnetic induction, ground-penetrating radar, magnetic resonance, interferometry, seismoelectric and more. Sections on data analysis and inverse theory are provided and chapters are illustrated by case studies, giving students and professionals the tools to plan, conduct and analyze a near-surface geophysical survey. This is an important textbook for advanced-undergraduate and graduate students in geophysics and a valuable reference for practising geophysicists, geologists, hydrologists, archaeologists, and civil and geotechnical engineers.
Download or read book Environmental Geology written by Klaus Knödel and published by Springer Science & Business Media. This book was released on 2007-12-31 with total page 1375 pages. Available in PDF, EPUB and Kindle. Book excerpt: This illustrated handbook describes a broad spectrum of methods in the fields of remote sensing, geophysics, geology, hydrogeology, geochemistry, and microbiology designed to investigate landfill, mining and industrial sites. The descriptions provide information about the principle of the methods, applications and fundamentals. This handbook also deals with the stepwise procedure for investigating sites and common problems faced in efficient implementation of field operations.
Download or read book The Magnetotelluric Method written by Alan D. Chave and published by Cambridge University Press. This book was released on 2012-04-26 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: The magnetotelluric method is a technique for imaging the electrical conductivity and structure of the Earth, from the near surface down to the 410 km transition zone and beyond. This book forms the first comprehensive overview of magnetotellurics, from the salient physics and its mathematical representation to practical implementation in the field, data processing, modeling and geological interpretation. Electromagnetic induction in 1-D, 2-D and 3-D media is explored, building from first principles, and with thorough coverage of the practical techniques of time series processing, distortion, numerical modeling and inversion. The fundamental principles are illustrated with a series of case histories describing geological applications. Technical issues, instrumentation and field practices are described for both land and marine surveys. This book provides a rigorous introduction to magnetotellurics for academic researchers and advanced students, and will be of interest to industrial practitioners and geoscientists wanting to incorporate rock conductivity into their interpretations.
Download or read book Applied Geophysics written by W. M. Telford and published by Cambridge University Press. This book was released on 1990-10-26 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the completely revised and updated version of the popular and highly regarded textbook, Applied Geophysics. It describes the physical methods involved in exploration for hydrocarbons and minerals, which include gravity, magnetic, seismic, electrical, electromagnetic, radioactivity, and well-logging methods. All aspects of these methods are described, including basic theory, field equipment, techniques of data acquisition, data processing and interpretation, with the objective of locating commercial deposits of minerals, oil, and gas and determining their extent. In the fourteen years or so since the first edition of Applied Geophysics, many changes have taken place in this field, mainly as the result of new techniques, better instrumentation, and increased use of computers in the field and in the interpretation of data. The authors describe these changes in considerable detail, including improved methods of solving the inverse problem, specialized seismic methods, magnetotellurics as a practical exploration method, time-domain electromagnetic methods, increased use of gamma-ray spectrometers, and improved well-logging methods and interpretation.
Download or read book Electromagnetic Methods in Applied Geophysics written by Misac N. Nabighian and published by SEG Books. This book was released on 1988 with total page 989 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a slag heap, the result of strip mining, creeps closer to his house in the Ohio hills, fifteen-year-old M. C. is torn between trying to get his family away and fighting for the home they love.
Download or read book Encyclopedia of Solid Earth Geophysics written by Harsh Gupta and published by Springer Science & Business Media. This book was released on 2011-06-29 with total page 1579 pages. Available in PDF, EPUB and Kindle. Book excerpt: The past few decades have witnessed the growth of the Earth Sciences in the pursuit of knowledge and understanding of the planet that we live on. This development addresses the challenging endeavor to enrich human lives with the bounties of Nature as well as to preserve the planet for the generations to come. Solid Earth Geophysics aspires to define and quantify the internal structure and processes of the Earth in terms of the principles of physics and forms the intrinsic framework, which other allied disciplines utilize for more specific investigations. The first edition of the Encyclopedia of Solid Earth Geophysics was published in 1989 by Van Nostrand Reinhold publishing company. More than two decades later, this new volume, edited by Prof. Harsh K. Gupta, represents a thoroughly revised and expanded reference work. It brings together more than 200 articles covering established and new concepts of Geophysics across the various sub-disciplines such as Gravity, Geodesy, Geomagnetism, Seismology, Seismics, Deep Earth Processes, Plate Tectonics, Thermal Domains, Computational Methods, etc. in a systematic and consistent format and standard. It is an authoritative and current reference source with extraordinary width of scope. It draws its unique strength from the expert contributions of editors and authors across the globe. It is designed to serve as a valuable and cherished source of information for current and future generations of professionals.
Download or read book An Introduction to Geophysical Exploration written by Philip Kearey and published by John Wiley & Sons. This book was released on 2013-04-16 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of the well-established Kearey and Brooks text is fully updated to reflect the important developments in geophysical methods since the production of the previous edition. The broad scope of previous editions is maintained, with even greater clarity of explanations from the revised text and extensively revised figures. Each of the major geophysical methods is treated systematically developing the theory behind the method and detailing the instrumentation, field data acquisition techniques, data processing and interpretation methods. The practical application of each method to such diverse exploration applications as petroleum, groundwater, engineering, environmental and forensic is shown by case histories. The mathematics required in order to understand the text is purposely kept to a minimum, so the book is suitable for courses taken in geophysics by all undergraduate students. It will also be of use to postgraduate students who might wish to include geophysics in their studies and to all professional geologists who wish to discover the breadth of the subject in connection with their own work.
Download or read book Physical Properties of Rocks written by Jürgen Schön and published by Elsevier. This book was released on 2011-08-02 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: A symbiosis of a brief description of physical fundamentals of the rock properties (based on typical experimental results and relevant theories and models) with a guide for practical use of different theoretical concepts.
Download or read book A Method of Measuring Earth Resistivity written by Frank Wenner and published by . This book was released on 1916 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to Applied and Environmental Geophysics written by John M. Reynolds and published by John Wiley & Sons. This book was released on 2011-07-07 with total page 1249 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Applied and Environmental Geophysics, 2nd Edition, describes the rapidly developing field of near-surface geophysics. The book covers a range of applications including mineral, hydrocarbon and groundwater exploration, and emphasises the use of geophysics in civil engineering and in environmental investigations. Following on from the international popularity of the first edition, this new, revised, and much expanded edition contains additional case histories, and descriptions of geophysical techniques not previously included in such textbooks. The level of mathematics and physics is deliberately kept to a minimum but is described qualitatively within the text. Relevant mathematical expressions are separated into boxes to supplement the text. The book is profusely illustrated with many figures, photographs and line drawings, many never previously published. Key source literature is provided in an extensive reference section; a list of web addresses for key organisations is also given in an appendix as a valuable additional resource. Covers new techniques such as Magnetic Resonance Sounding, Controlled- Source EM, shear-wave seismic refraction, and airborne gravity and EM techniques Now includes radioactivity surveying and more discussions of down-hole geophysical methods; hydrographic and Sub-Bottom Profiling surveying; and UneXploded Ordnance detection Expanded to include more forensic, archaeological, glaciological, agricultural and bio-geophysical applications Includes more information on physio-chemical properties of geological, engineering and environmental materials Takes a fully global approach Companion website with additional resources available at www.wiley.com/go/reynolds/introduction2e Accessible core textbook for undergraduates as well as an ideal reference for industry professionals The second edition is ideal for students wanting a broad introduction to the subject and is also designed for practising civil and geotechnical engineers, geologists, archaeologists and environmental scientists who need an overview of modern geophysical methods relevant to their discipline. While the first edition was the first textbook to provide such a comprehensive coverage of environmental geophysics, the second edition is even more far ranging in terms of techniques, applications and case histories.
