Download or read book Preparation of Catalysts VII written by R. Maggi and published by Elsevier. This book was released on 1998-08-17 with total page 1007 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the VIIth International Symposium on the Scientific Bases for the Preparation of Heterogeneous Catalysts, are in line with the general scope of this series of events. Emphasis in all Symposia has been on the scientific aspects of the preparation of new and industrial catalysts, or on new methods of preparation, rather than on the catalytic reactions in which such solids are ultimately used. In the present context, the catalytic event itself has only been considered as another, though often decisive, method of catalyst characterization.
Download or read book Spillover and Mobility of Species on Solid Surfaces written by A. Guerrero-Ruiz and published by Elsevier. This book was released on 2001-08-02 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Spillover and Mobility of Species and Solid Surfaces" collects the papers which were presented at the Fifth International Conference Spillover, either as oral or poster contributions, as well as the summaries of the invited lectures. This congress and its publication in the Studies on Surface Science and Catalysis series follow the tradition of previous conferences on spillover, initiated in Lyon, 1983, and continued in Leipzig, 1989, Kyoto 1993 and Dalian, 1997. For the fifth conference, held in S.L. el Escorial (Madrid), the organising committee has attempted to compile representative contributions which illustrate the advances in understanding the spillover phenomenon since 1997. Spillover is a process taking place during the interface of gas reactant molecules (mainly hydrogen and oxygen) on solid surfaces. However, different contributions to the more general area of the chemistry at surfaces, related with the mobility and migration of species, diffusion through membranes, fuel cell catalysts, etc., have also been included. In fact the title of the present volume summarizes this attempt to extend the conference topics towards dynamics at surfaces.Among the 70 contributions received, the 56 accepted papers were selected on the basis of the reports of at least two international reviewers, according to standards comparable to those applied for other specialised journals. These papers are from 21 different countries.
Download or read book Microstructure and Properties of Micro and Nanoscale Materials Films and Coatings NAP 2019 written by Alexander D. Pogrebnjak and published by Springer Nature. This book was released on 2020-01-28 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the findings of experimental and theoretical (including first-principles molecular dynamics simulation) studies of nanostructured and nanocomposite metal-based materials, and nanoscale multilayer coatings fabricated by physical or chemical vapor deposition, magnetron sputtering, electrospark alloying, ionic layer absorption, contact melting, and high-current electron beam irradiation. It also discusses novel methods of nanocomposite formation, as well as the structure of the deposited films, coatings and other nanoscale materials, their elemental and phase composition, and their physical–mechanical, tribological, magnetic and electrical properties. Lastly, it explores the influence of a various surface modification methods, such as thermal annealing, pulsed laser modification, and thermomechanical and ultrasonic treatment, as well as different properties of nanostructured films.
Download or read book Transition Metals in Coordination Environments written by Ewa Broclawik and published by Springer. This book was released on 2019-03-16 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the electronic properties of transition metals in coordination environments. These properties are responsible for the unique and intricate activity of transition metal sites in bio- and inorganic catalysis, but also pose challenges for both theoretical and experimental studies. Written by an international group of recognized experts, the book reviews recent advances in computational modeling and discusses their interplay using experiments. It covers a broad range of topics, including advanced computational methods for transition metal systems; spectroscopic, electrochemical and catalytic properties of transition metals in coordination environments; metalloenzymes and biomimetic compounds; and spin-related phenomena. As such, the book offers an invaluable resource for all researchers and postgraduate students interested in both fundamental and application-oriented research in the field of transition metal systems.
Download or read book Scientific Bases for the Preparation of Heterogeneous Catalysts written by E. Gaigneaux and published by Elsevier. This book was released on 2002-08-29 with total page 1150 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has become a tradition that every four years, the Université Catholique de Louvain and the Katholieke Universiteit Leuven jointly organize a symposium devoted to the scientific bases for the preparation of heterogeneous catalysts. These meetings bring together researchers from academia and industry and offer a forum for discussions on the chemistry involved in the preparation of industrial heterogeneous catalysts. This volume containing the Proceedings of the 8th International Symposium on Scientific Bases for the Preparation of Heterogeneous Catalysts consists of papers summarizing most of the 139 oral communications and posters selected by the international scientific committee, composed of 27 experts in the field of catalyst preparation, holding an industrial or academia appointment.The contributions focus on the aspects of catalyst preparation. The main topics are: new approaches in catalyst preparation; advanced preparations of nanoporous and mesoporous catalysts; catalysts preparation for special performances and purposes; catalysts for environmental purposes; and molecular catalysis. Emphasis is put on the role that catalysis can play as an essential element of sustainable development.
Download or read book Metal Oxides in Heterogeneous Catalysis written by Jacques C. Vedrine and published by Elsevier. This book was released on 2018-01-11 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides in Heterogeneous Catalysis is an overview of the past, present and future of heterogeneous catalysis using metal oxides catalysts. The book presents the historical, theoretical, and practical aspects of metal oxide-based heterogeneous catalysis. Metal Oxides in Heterogeneous Catalysis deals with fundamental information on heterogeneous catalysis, including reaction mechanisms and kinetics approaches.There is also a focus on the classification of metal oxides used as catalysts, preparation methods and touches on zeolites, mesoporous materials and Metal-organic frameworks (MOFs) in catalysis. It will touch on acid or base-type reactions, selective (partial) and total oxidation reactions, and enzymatic type reactions The book also touches heavily on the biomass applications of metal oxide catalysts and environmentally related/depollution reactions such as COVs elimination, DeNOx, and DeSOx. Finally, the book also deals with future trends and prospects in metal oxide-based heterogeneous catalysis. - Presents case studies in each chapter that provide a focus on the industrial applications - Includes fundamentals, key theories and practical applications of metal oxide-based heterogeneous catalysis in one comprehensive resource - Edited, and contributed, by leading experts who provide perspectives on synthesis, characterization and applications
Download or read book Nanoporous Materials Science And Engineering written by G Q Max Lu and published by World Scientific. This book was released on 2004-11-22 with total page 911 pages. Available in PDF, EPUB and Kindle. Book excerpt: Porous materials are of scientific and technological importance because of the presence of voids of controllable dimensions at the atomic, molecular, and nanometer scales, enabling them to discriminate and interact with molecules and clusters. Interestingly the big deal about this class of materials is about the “nothingness” within — the pore space. International Union of Pure and Applied Chemistry (IUPAC) classifies porous materials into three categories — micropores of less than 2 nm in diameter, mesopores between 2 and 50 nm, and macropores of greater than 50 nm. In this book, nanoporous materials are defined as those porous materials with pore diameters less than 100 nm.Over the last decade, there has been an ever increasing interest and research effort in the synthesis, characterization, functionalization, molecular modeling and design of nanoporous materials. The main challenges in research include the fundamental understanding of structure-property relations and tailor-design of nanostructures for specific properties and applications. Research efforts in this field have been driven by the rapid growing emerging applications such as biosensor, drug delivery, gas separation, energy storage and fuel cell technology, nanocatalysis and photonics. These applications offer exciting new opportunities for scientists to develop new strategies and techniques for the synthesis and applications of these materials.This book provides a series of systematic reviews of the recent developments in nanoporous materials. It covers the following topics: (1) synthesis, processing, characterization and property evaluation; (2) functionalization by physical and/or chemical treatments; (3) experimental and computational studies on fundamental properties, such as catalytic effects, transport and adsorption, molecular sieving and biosorption; (4) applications, including photonic devices, catalysis, environmental pollution control, biological molecules separation and isolation, sensors, membranes, hydrogen and energy storage, etc./a
Download or read book Molecular Sieves From Basic Research to Industrial Applications written by Jiri Cejka and published by Elsevier. This book was released on 2005-08-30 with total page 2190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to their unique porous properties, zeolites (also referred to as molecular sieves) are used in a variety of applications - major uses are in petrochemical cracking, ion-exchange (water softening and purification), and in the separation and removal of gases and solvents. Molecular Sieves: From Basic Research to Industrial Applications, Volume 158 A,B presents over 265 worldwide contributions on the latest developments in zeolitic research. Readers will find this book, which is divided into five sections: Synthesis, Characterization, Adsorption, Catalysis, and Novel applications, ideal for staying up to date on current research on porous materials.* Comprehensive overview of current research on porous materials* Contains experimental as well as theoretical input, reflecting the increasing overlap between theory and experiment* Contributions from the world's leading authorities
Download or read book Design and Applications of Hydroxyapatite Based Catalysts written by Doan Pham Minh and published by John Wiley & Sons. This book was released on 2022-06-15 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Essential reference for researchers and experts in industry highlighting the rapidly growing field of hydroxyapatite-based catalysts and their application in various chemical processes. Hydroxyapatite (Ca10(PO4)6(OH)2) is the main mineral component of human and animal bones. It is largely applied in the field of biomaterials due to its biocompatibility. Recently, hydroxyapatite-based materials have especially gained a lot of attention by researchers in catalysis, as they are versatile and have shown precious properties of a good catalyst and catalyst support such as excellent ion-exchange capacity, high porosity, very low water solubility, controlled basicity/acidity, and good thermal stability at high temperatures. Design and Applications of Hydroxyapatite-Based Catalysts gives a detailed overview of the synthesis, characterization, and use of hydroxyapatite-based materials in catalysis. It covers synthetic hydroxyapatites (from pure chemicals or waste), natural apatites and materials from eggshells and animal bones. The application of hydroxyapatite-based catalysts in selective oxidation, deoxygenation, selective hydrogenation, dehydrogenation reactions, organic synthesis, as well as reforming processes and production of energy carriers is reviewed. Moreover, electrocatalysis and photocatalysis using hydroxyapatite-based materials are discussed. Kinetic and mechanism studies of various chemical pro-cesses over hydroxyapatite-based catalysts are also presented. This is the first book solely dedicated to hydroxyapatite-based materials and their use in catalysis. Covers synthesis and characterization, surface and structure studies, kinetic and mechanism aspects, and various applications in heterogeneous catalysis, electrocatalysis, and photocatalysis. Aimed at further stimulating research in the field Design and Applications of Hydroxyapatite-Based Catalysts is an indispensable source-of-information for researchers in academia and industry working in catalysis.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Innovations in Materials Design written by and published by . This book was released on 1998 with total page 1044 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Comprehensive Inorganic Chemistry II written by and published by Newnes. This book was released on 2013-07-23 with total page 7694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Inorganic Chemistry II, Nine Volume Set reviews and examines topics of relevance to today’s inorganic chemists. Covering more interdisciplinary and high impact areas, Comprehensive Inorganic Chemistry II includes biological inorganic chemistry, solid state chemistry, materials chemistry, and nanoscience. The work is designed to follow on, with a different viewpoint and format, from our 1973 work, Comprehensive Inorganic Chemistry, edited by Bailar, Emeléus, Nyholm, and Trotman-Dickenson, which has received over 2,000 citations. The new work will also complement other recent Elsevier works in this area, Comprehensive Coordination Chemistry and Comprehensive Organometallic Chemistry, to form a trio of works covering the whole of modern inorganic chemistry. Chapters are designed to provide a valuable, long-standing scientific resource for both advanced students new to an area and researchers who need further background or answers to a particular problem on the elements, their compounds, or applications. Chapters are written by teams of leading experts, under the guidance of the Volume Editors and the Editors-in-Chief. The articles are written at a level that allows undergraduate students to understand the material, while providing active researchers with a ready reference resource for information in the field. The chapters will not provide basic data on the elements, which is available from many sources (and the original work), but instead concentrate on applications of the elements and their compounds. Provides a comprehensive review which serves to put many advances in perspective and allows the reader to make connections to related fields, such as: biological inorganic chemistry, materials chemistry, solid state chemistry and nanoscience Inorganic chemistry is rapidly developing, which brings about the need for a reference resource such as this that summarise recent developments and simultaneously provide background information Forms the new definitive source for researchers interested in elements and their applications; completely replacing the highly cited first edition, which published in 1973
Download or read book Encyclopedia of Surface and Colloid Science written by P. Somasundaran and published by CRC Press. This book was released on 2006 with total page 1084 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1994-11 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Abstracts of Papers written by and published by . This book was released on 1984 with total page 1038 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Commemorative Issue in Honor of Professor Emeritus Calvin H Bartholomew in Anticipation of His 75th Birthday written by Morris D. Argyle and published by MDPI. This book was released on 2019-01-16 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Commemorative Issue in Honor of Professor Emeritus Calvin H. Bartholomew in Anticipation of His 75th Birthday" that was published in Catalysts
Download or read book Catalysis by Microporous Materials written by H.K. Beyer and published by Elsevier. This book was released on 1995-05-19 with total page 811 pages. Available in PDF, EPUB and Kindle. Book excerpt: ZEOCAT '95 is the eleventh in the series of symposia devoted to special fields of zeolite chemistry. Six plenary lectures, forty oral and forty-two poster presentations were included in the program. The accepted papers cover every aspect of catalysis on microporous materials. A significant number of the contributions describe the synthesis, modification, instrumental and chemical characterisation of zeolites and other micro- and mesoporous materials. Catalytic reactions involve hydrocarbon cracking, nucleophilic aromatic substitution, methanol to hydrocarbon conversion, hydration of acetylene, various alkylation reactions, redox transformations, Claisen rearrangement, etc.
