Download or read book On the degradation of wood pellets during pneumatic conveying Experiments and DEM CFD simulations written by Julian Jägers and published by Cuvillier Verlag. This book was released on 2021-02-22 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Die Zerkleinerung von Holzpellets und damit die Entstehung von Feinanteil während des pneumatischen Transports wird zusammen mit den auftretenden Druckverluste im Rahmen dieser Arbeit experimentell und numerisch untersucht. Zunächst erfolgt die Entwicklung eines empirischen Bruchmodells auf Basis von Einzelpartikelprallversuchen zur statistischen Beschreibung des Bruchverhaltens von Holzpellets in Abhängigkeit von Kenngrößen wie Partikellänge, Aufprallgeschwindigkeit und -Winkel. Die entwickelten Korrelationen werden in den hauseigenen DEM-Code des Lehrstuhls für Energieanlagen und Energieprozesstechnik der Ruhr-Universität Bochum implementiert. Gekoppelte DEM-CFD Simulationen geben detaillierte Einblicke in die Abhängigkeiten der Strömungsverhältnisse sowie des Bewegungsverhaltens und der mechanischen Belastungen der geförderten Partikel von Betriebsbedingungen und Leitungskomponenten. Die numerischen Ergebnisse stimmen qualitativ mit denen korrespondierender Experimente überein und zeigen die Erhöhung von Pelletbruch und Feinanteil durch zunehmende Förderluftströme bzw. abnehmende Pelletmassenströme und kleinere Krümmerradien. Das entwickelte Bruchmodel ermöglicht detaillierte Untersuchungen pneumatischer Fördervorgänge und die Auslegung schonender Betriebsbedingungen und Leitungskomponenten zur Reduzierung von Druckverlusten sowie Pelletbruch und Feinanteil. In the present thesis, the dependence of wood pellet degradation and fines formation during pneumatic conveying on operating conditions like air and product mass flow or shape of pipe components is investigated. Both the size reduction of the cylindrical pellets during pneumatic transport caused by mechanical impacts and the prevailing pressure losses are analysed experimentally and numerically. Single particle impact tests are performed for investigating the breakage behaviour of wood pellets including the effect of particle length, impact velocity and collision angle. Based on the empirical correlations derived, a numerical degradation model is developed and implemented into the in-house DEM code of the Department of Energy Plant and Technology of the Ruhr-University Bochum. Experimental and numerical investigations are conducted using coupled DEM-CFD simulations to obtain detailed insights into flow conditions, particle motion and the mechanical loads on the pellets during pneumatic conveying. Numerical results show good qualitative agreement with the experimentally determined degradation rates and prevailing pressure losses. The degradation model developed allows detailed investigation into wood pellet degradation and fines formation during pneumatic conveying and enables the design of pipe configurations and operating conditions to prevent particle size reduction and excessive pressure losses.
Download or read book Pollutants Generated by the Combustion of Solid Biomass Fuels written by Jenny M Jones and published by Springer. This book was released on 2014-11-04 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book considers the pollutants formed by the combustion of solid biomass fuels. The availability and potential use of solid biofuels is first discussed because this is the key to the development of biomass as a source of energy. This is followed by details of the methods used for characterisation of biomass and their classification. The various steps in the combustion mechanisms are given together with a compilation of the kinetic data. The chemical mechanisms for the formation of the pollutants: NOx, smoke and unburned hydrocarbons, SOx, Cl compounds, and particulate metal aerosols are given in detail. Combustion kinetics required for the application for design purposes are given. Examples are given of emission levels of a range different types of combustion equipment. Data is given of NOx, particulates and other pollutant arising from combustion of different fuels in fixed bed combustion, fluidized bed combustion and pulverised biomass combustion and co-firing. Modeling methods including computational fluid dynamics for the various pollutants are outlined. The consequential issues arising from the wide scale use of biomass and future trends are then discussed. In particular the role of carbon capture and storage in large biomass combustion plants is considered as well as the opportunity of reducing the concentration of atmospheric concentration of carbon dioxide.
Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. New discussion of conceptual plant design, flowsheet development and revamp design Significantly increased coverage of capital cost estimation, process costing and economics New chapters on equipment selection, reactor design and solids handling processes New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography Increased coverage of batch processing, food, pharmaceutical and biological processes All equipment chapters in Part II revised and updated with current information Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards Additional worked examples and homework problems The most complete and up to date coverage of equipment selection 108 realistic commercial design projects from diverse industries A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors
Download or read book Discrete Element Methods written by Benjamin K. Cook and published by . This book was released on 2002 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the Third International Conference on Discrete Element Methods, held in Santa Fe, New Mexico on September 23-25, 2002. This Geotechnical Special Publication contains 72 technical papers on discrete element methods (DEM), a suite of numerical techniques developed to model granular materials, rock, and other discontinua at the grain scale. Topics include: DEM formulation and implementation approaches, coupled methods, experimental validation, and techniques, including three-dimensional particle representations, efficient contact detection algorithms, particle packing schemes, and code design. Coupled methods include approaches to linking solid continuum and fluid models with DEM to simulate multiscale and multiphase phenomena. Applications include fundamental investigations of granular mechanics; micromechanical studies of powder, soil, and rock behavior; and large-scale modeling of geotechnical, material processing, mining, and petroleum engineering problems.
Download or read book Discrete element Modeling of Granular Materials written by Farhang Radjaï and published by Wiley-ISTE. This book was released on 2011-05-03 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together in a single volume various methods and skills for particle-scale or discrete-element numerical simulation of granular media. It covers a broad range of topics from basic concepts and methods towards more advanced aspects and technical details applicable to the current research on granular materials. Discrete-element simulations of granular materials are based on four basic models (molecular dynamics, contact dynamics, quasi-static and event driven) dealing with frictional contact interactions and integration schemes for the equations of dynamics. These models are presented in the first chapters of the book, followed by various methods for sample preparation and monitoring of boundary conditions, as well as dimensionless control parameters. Granular materials encountered in real life involve a variety of compositions (particle shapes and size distributions) and interactions (cohesive, hydrodynamic, thermal) that have been extensively covered by several chapters. The book ends with two applications in the field of geo-materials.
Download or read book Biomass Pelletization written by A. Garcia-Maraver and published by WIT Press. This book was released on 2015-04-07 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental and energy dependency problems derived from high fossil fuels consumption have made necessary the development of new energy models to be renewable and sustainable, efficient, practical and economical, and cost effective, to meet the demand for a sustainable energy supply. Among renewable resources, biomass is destined to play an important role in these new energy models since agricultural and forestry residues are an energy resource which is produced in relatively large amounts throughout the world and regarded as a renewable and environmentally safe way of providing energy. Compiling information on the conversion of energy from biomass, the book focuses on the use of pellets as homogeneous solid biofuels. It describes all the changes that forestry and agricultural biomass undergo to be converted into thermal energy and analyses the inputs and outputs of the process. It has to be noted that the standards used as guidelines and references in all the chapters of the book are there in order to not to forget the thresholds and guidelines established and thus to ensure a proper use. This book guides the reader through the entire biomass-to-energy process, emphasising important aspects and how the quality of the biofuel can be identified. It acts as a starting point for professionals and researchers interested in working with biomass and a guide for those people interested in the implementation of the technologies described.
Download or read book Discrete Element Method in the Design of Transport Systems written by Daniel Gelnar and published by Springer. This book was released on 2019-01-02 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the design and optimization of the bucket elevator using the discrete element method (DEM). It describes the underlying scientific basis for the design of transport equipment using computer simulations and is focused on issues relevant to the industrial sector, mechanical engineering; and the transport, treatment, measurement, and storage of bulk materials. It presents solutions for mitigating bulk material supply chain interruptions due to process malfunctions and failures, utilizing research on monitoring and evaluating of the dynamic processes of particulate matter. The aim of the book is to help readers new to the field with the design of innovative devices. Imparting practical information aimed at saving time and money in project design, the book is ideal for engineers, designers, and researchers concerned with all aspects of bulk materials. Introduces and explains fully the Discrete Element Method using measured values as inputs for the method; Shows whether calculated simulations and real measured values models can be used for design; Illustrates how to validate, calibrate, and optimize the dynamic processes of bulk elevators; Explains how to test transport and storage equipment before it is produced using dynamic simulation of material flow on transport lines, saving time and money.
Download or read book The Handbook of Biomass Combustion and Co firing written by Jaap Koppejan and published by Earthscan. This book was released on 2012-05-16 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique handbook presents both the theory and application of biomass combustion and co-firing, from basic principles to industrial combustion and environmental impact, in a clear and comprehensive manner. It offers a solid grounding on biomass combustion, and advice on improving combustion systems.Written by leading international academics and industrial experts, and prepared under the auspices of the IEA Bioenergy Implementing Agreement, the handbook is an essential resource for anyone interested in biomass combustion and co-firing technologies varying from domestic woodstoves to utility-scale power generation. The book covers subjects including biomass fuel pre-treatment and logistics, modelling the combustion process and ash-related issues, as well as featuring an overview of the current R&D needs regarding biomass combustion.
Download or read book Process Modelling and Simulation written by César de Prada and published by MDPI. This book was released on 2019-09-23 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since process models are nowadays ubiquitous in many applications, the challenges and alternatives related to their development, validation, and efficient use have become more apparent. In addition, the massive amounts of both offline and online data available today open the door for new applications and solutions. However, transforming data into useful models and information in the context of the process industry or of bio-systems requires specific approaches and considerations such as new modelling methodologies incorporating the complex, stochastic, hybrid and distributed nature of many processes in particular. The same can be said about the tools and software environments used to describe, code, and solve such models for their further exploitation. Going well beyond mere simulation tools, these advanced tools offer a software suite built around the models, facilitating tasks such as experiment design, parameter estimation, model initialization, validation, analysis, size reduction, discretization, optimization, distributed computation, co-simulation, etc. This Special Issue collects novel developments in these topics in order to address the challenges brought by the use of models in their different facets, and to reflect state of the art developments in methods, tools and industrial applications.
Download or read book Screw Extrusion written by James Lindsay White and published by . This book was released on 2003 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Screw extruders are the most important of all polymer processing machines There is a need for a comprehensive book on this subject. This book emphazises the understanding of the underlaying principles of screw extrusion, the design and behavior of screw based machines. It helps the enineer t optimize his equipment and enhance production rates. Contents: · Introduction · Fundamentals · Screw Extrusion Technology · Technology of Single Screw Extrusion with Reciprocating Screws · Single Screw Extruder Analysis and Design · Twin and Multiscrew Extrusion
Download or read book Particle Size Characterization Classic Reprint written by Ajit Jillavenkatesa and published by Forgotten Books. This book was released on 2018-09-09 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Particle Size Characterization This guide has been written to address some of these issues and concerns in this regard. The guide is by no means an exhaustive and comprehensive text on particle size analysis, but attempts to convey the practical issues that need to be considered when attempting analysis by some of the more commonly used techniques in the ceramics manufacturing community. The document is written to guide persons who are not experts in the field, but have some fundamental knowledge and familiarity of the issues involved. References to pertinent international standards and other comprehensive sources of information have been included. Data and information from studies conducted at the National Institute of Standards and Technology, and experience gained over years of participation in international round robin tests and standards development, have been used in developing the information presented in this text. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Multiphase Flow and Fluidization written by Dimitri Gidaspow and published by Elsevier. This book was released on 2012-12-02 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Useful as a reference for engineers in industry and as an advanced level text for graduate engineering students, Multiphase Flow and Fluidization takes the reader beyond the theoretical to demonstrate how multiphase flow equations can be used to provide applied, practical, predictive solutions to industrial fluidization problems. Written to help advance progress in the emerging science of multiphase flow, this book begins with the development of the conservation laws and moves on through kinetic theory, clarifying many physical concepts (such as particulate viscosity and solids pressure) and introducing the new dependent variable--the volume fraction of the dispersed phase. Exercises at the end of each chapterare provided for further study and lead into applications not covered in the text itself. Treats fluidization as a branch of transport phenomena Demonstrates how to do transient, multidimensional simulation of multiphase processes The first book to apply kinetic theory to flow of particulates Is the only book to discuss numerical stability of multiphase equations and whether or not such equations are well-posed Explains the origin of bubbles and the concept of critical granular flow Presents clearly written exercises at the end of each chapter to facilitate understanding and further study
Download or read book Particle Breakage written by Agba D. Salman and published by Elsevier Science Limited. This book was released on 2007 with total page 1227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gives an understanding of the state-of-the-art, and access to a wide range of principles. An academic outlook, blended with an industrial perspective!
Download or read book Fire Safety Challenges of Green Buildings written by Brian Meacham and published by Springer Science & Business Media. This book was released on 2013-08-05 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental concerns and advances in architectural technologies have lead to a greater number of green buildings or buildings with green, eco-friendly elements. However, from a practical standpoint, there is no incident reporting system in the world that tracks data on fire incidents in green buildings. Fire safety objectives are not explicitly considered in most green rating schemes, and green design features have been associated with photovoltaic panels and roof materials, lightweight timber frame buildings, and combustible insulation materials. Fire Safety Challenges of Green Buildings is the result of an extensive global literature review that sought to identify issues related to green building elements or features and ways to ensure those issues are tracked for future improvement. The book identifies actual incidents of fires in green buildings or involving green building elements, points out issues with green building elements that would increase fire risk, clarifies reports and studies that address ways to reduce fire risk in green design elements, and compares research studies that explicitly incorporate fire safety into green building design. The authors also pinpoint gaps and specific research needs associated with understanding and addressing fire risk and hazards with green building design. Using their data, the authors developed a set of matrices relating these green attributes and potential fire hazards. With these comprehensive tools, potential mitigation strategies for addressing the relative increase in fire risk or hazard associated with the green building elements and features have been identified. Fire Safety Challenges of Green Buildings is intended for practitioners as a tool for analyzing building safety issues in green architecture and developing methods for tracking data related to green design elements and their potential hazards. Researchers working in a related field will also find the book valuable.
Download or read book Materials Design and Manufacturing for Sustainable Environment written by Santhakumar Mohan and published by Springer Nature. This book was released on 2021-02-06 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the select proceedings of the International Conference on Materials, Design and Manufacturing for Sustainable Environment (ICMDMSE 2020). The primary focus is on emerging materials and cutting-edge manufacturing technologies for sustainable environment. The book covers a wide range of topics such as advanced materials, vibration, tribology, finite element method (FEM), heat transfer, fluid mechanics, energy engineering, additive manufacturing, robotics and automation, automobile engineering, industry 4.0, MEMS and nanotechnology, optimization techniques, condition monitoring, and new paradigms in technology management. Contents of this book will be useful to students, researchers, and practitioners alike.
Download or read book Advanced Oxidation Processes for Water and Wastewater Treatment written by Simon Parsons and published by IWA Publishing. This book was released on 2004-03-01 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The suitability of Advanced Oxidation Processes (AOPs) for pollutant degradation was recognised in the early 1970s and much research and development work has been undertaken to commercialise some of these processes. AOPs have shown great potential in treating pollutants at both low and high concentrations and have found applications as diverse as ground water treatment, municipal wastewater sludge destruction and VOCs control. Advanced Oxidation Processes for Water and Wastewater Treatment is an overview of the advanced oxidation processes currently used or proposed for the remediation of water, wastewater, odours and sludge. The book contains two opening chapters which present introductions to advanced oxidation processes and a background to UV photolysis, seven chapters focusing on individual advanced oxidation processes and, finally, three chapters concentrating on selected applications of advanced oxidation processes. Advanced Oxidation Processes for Water and Wastewater Treatment will be invaluable to readers interested in water and wastewater treatment processes, including professionals and suppliers, as well as students and academics studying in this area. Dr Simon Parsons is a Senior Lecturer in Water Sciences at Cranfield University with ten years' experience of industrial and academic research and development.
Download or read book Fluidized Bed Reactors Processes and Operating Conditions written by John G. Yates and published by Springer. This book was released on 2016-09-27 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fluidized-bed reactor is the centerpiece of industrial fluidization processes. This book focuses on the design and operation of fluidized beds in many different industrial processes, emphasizing the rationale for choosing fluidized beds for each particular process. The book starts with a brief history of fluidization from its inception in the 1940’s. The authors present both the fluid dynamics of gas-solid fluidized beds and the extensive experimental studies of operating systems and they set them in the context of operating processes that use fluid-bed reactors. Chemical engineering students and postdocs as well as practicing engineers will find great interest in this book.
