Download or read book On the anisotropic plastic behaviour of short fibre reinforced thermoplastics and its description by phenomenological material modelling written by Felix Dillenberger and published by Springer Nature. This book was released on 2019-10-21 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: A requirement for the safe design of thermoplastic parts is the ability to precisely predict mechanical behaviour by finite element simulations. Typical examples include the engineering of relevant components in automotive applications. For this purpose adequate material models are essential. In this context, the present work introduces a material modelling approach for short fibre reinforced thermoplastics (SFRTPs). SFRTP parts are processed cost-effectively by injection moulding and show a varying degree of anisotropy due to the locally inhomogeneous fibre distributions that arise during the moulding process. The presented material model considers linear-elastic behaviour and non-linear orthotropic stress-state dependent viscoplastic deformation for arbitrary fibre distributions. The constitutive equations are verified with the experiments of a PPGF30 material regarding different stress-states and orientations.
Download or read book Short Fibre Reinforced Thermoplastics written by M. J. Folkes and published by Research Studies Press Limited. This book was released on 1982 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good,No Highlights,No Markup,all pages are intact, Slight Shelfwear,may have the corners slightly dented, may have slight color changes/slightly damaged spine.
Download or read book Multi scale Simulation of Composite Materials written by Stefan Diebels and published by Springer. This book was released on 2019-02-01 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to their high stiffness and strength and their good processing properties short fibre reinforced thermoplastics are well-established construction materials. Up to now, simulation of engineering parts consisting of short fibre reinforced thermoplastics has often been based on macroscopic phenomenological models, but deformations, damage and failure of composite materials strongly depend on their microstructure. The typical modes of failure of short fibre thermoplastics enriched with glass fibres are matrix failure, rupture of fibres and delamination, and pure macroscopic consideration is not sufficient to predict those effects. The typical predictive phenomenological models are complex and only available for very special failures. A quantitative prediction on how failure will change depending on the content and orientation of the fibres is generally not possible, and the direct involvement of the above effects in a numerical simulation requires multi-scale modelling. One the one hand, this makes it possible to take into account the properties of the matrix material and the fibre material, the microstructure of the composite in terms of fibre content, fibre orientation and shape as well as the properties of the interface between fibres and matrix. On the other hand, the multi-scale approach links these local properties to the global behaviour and forms the basis for the dimensioning and design of engineering components. Furthermore, multi-scale numerical simulations are required to allow efficient solution of the models when investigating three-dimensional problems of dimensioning engineering parts. Bringing together mathematical modelling, materials mechanics, numerical methods and experimental engineering, this book provides a unique overview of multi-scale modelling approaches, multi-scale simulations and experimental investigations of short fibre reinforced thermoplastics. The first chapters focus on two principal subjects: the mathematical and mechanical models governing composite properties and damage description. The subsequent chapters present numerical algorithms based on the Finite Element Method and the Boundary Element Method, both of which make explicit use of the composite’s microstructure. Further, the results of the numerical simulations are shown and compared to experimental results. Lastly, the book investigates deformation and failure of composite materials experimentally, explaining the applied methods and presenting the results for different volume fractions of fibres. This book is a valuable resource for applied mathematics, theoretical and experimental mechanical engineers as well as engineers in industry dealing with modelling and simulation of short fibre reinforced composites.
Download or read book Science and Engineering of Short Fibre Reinforced Polymer Composites written by Shao-yun Fu and published by Woodhead Publishing. This book was released on 2019-08-24 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science and Engineering of Short Fibre Reinforced Polymer Composites, Second Edition, provides the latest information on the ‘short fiber reinforced composites' (SFRP) that have found extensive applications in automobiles, business machines, durable consumer items, sporting goods and electrical industries due to their low cost, easy processing and superior mechanical properties over parent polymers. This updated edition presents new developments in this field of research and includes new chapters on electrical conductivity, structural monitoring, functional properties, self-healing, finite element method techniques, multi-scale SFRCs, and both modern computational and process engineering methods. Reviews the mechanical properties and functions of short fiber reinforced polymer composites (SFRP) Examines recent developments in the fundamental mechanisms of SFRP's Assesses major factors affecting mechanical performance, such as stress transfer and strength Includes new chapters on electrical conductivity, structural monitoring, functional properties, self-healing, finite element method techniques, multi-scale SFRCs, modern computational methods, and process engineering methods
Download or read book Impact Behaviour of Fibre Reinforced Composite Materials and Structures written by S. R. Reid and published by Elsevier. This book was released on 2000-10-12 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study covers impact response, damage tolerance and failure of fibre-reinforced composite materials and structures. Materials development, analysis and prediction of structural behaviour and cost-effective design all have a bearing on the impact response of composites and this book brings together for the first time the most comprehensive and up-to-date research work from leading international experts. State of the art analysis of impact response, damage tolerance and failure of FRC materials Distinguished contributors provide expert analysis of the most recent materials and structures Valuable tool for R&D engineers, materials scientists and designers
Download or read book Mechanical Properties of Reinforced Thermoplastics written by D.W. Clegg and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reinforcement of materials such as mud and clay by hair, straw and vegetable fibres has been long established in man's history, enabling him to improve his buildings and extend his engineering abilities. With the advent of modern synthetic polymers it was rapidly realised that the addition of fibres, flakes and particulate materials to polymer matrices could improve mechanical properties significantly. Fibres and flakes are the most effective and have enabled several polymers with limited properties to compete with long-established metallic materials, reSUlting in cost, weight and processing economies. This is increasingly apparent in the selection of materials for aerospace and road vehicle applications as well as in a multitude of domestic products. Reinforced plastics, both thermosets and thermoplastics, are used in increasingly harsh environments involving elevated temperatures and aggressive conditions. Fibre reinforcement of thermoplastics dominates, and a pattern of increasing replacement of fibre reinforced thermosets by reinforced thermoplastics is emerging. This trend is encouraged by the development of continuous fibre reinforced grades of the newer high-temperature engineering thermoplastics such as polyether ether ketone. The first part of this book reviews the mechanical properties and theories of short fibre reinforcement. The principal reinforcements are reviewed and a separate chapter is devoted to the uses of natural fibres as reinforcements for thermoplastics. This is an interesting and commercially important area, especially for Third World countries v vi Preface where these fibres are grown but are facing severe competition from synthetic fibres in traditional applications such as ropes and matting.
Download or read book International aerospace abstracts written by and published by . This book was released on 1993 with total page 1060 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fiber dependent injection molding simulation of discontinuous reinforced polymers written by Wittemann, Florian and published by KIT Scientific Publishing. This book was released on 2022-11-18 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents novel simulation techniques for injection molding of fiber reinforced polymers. These include approaches for anisotropic flow modeling, hydrodynamic forces from fluid on fibers, contact forces between fibers, a novel fiber breakage modeling approach and anisotropic warpage analysis. Due to the coupling of fiber breakage and anisotropic flow modeling, the fiber breakage directly influences the modeled cavity pressure, which is validated with experimental data.
Download or read book Reinforced Thermoplastics written by P. G. Kelleher and published by iSmithers Rapra Publishing. This book was released on 1993 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report covers semi and non-crystalline thermoplastics, polymer blends and various classes of reinforcing fibres, and the properties which determine their suitability for specific applications. A detailed discussion of the injection moulding of reinforced thermoplastics includes the effect of processing on fibre distribution and breakage. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database provides useful references for further reading.
Download or read book Polypropylene Handbook written by József Karger-Kocsis and published by Springer. This book was released on 2019-03-18 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book extensively reviews Polypropylene (PP), the second most widely produced thermoplastic material, having been produced for over 60 years. Its synthesis, processing and application are still accompanied by vigorous R&D developments because the properties of PP are at the borderline between those of commodity and engineering thermoplastics. Readers are introduced to various tacticities and polymorphs of PP, and their effects on structural properties. Further, the book addresses the control of optical properties using nucleants, provides strategies for overcoming the limited cold/impact resistance of PP, examines in detail the effects of recycling, and presents guidelines for the property modification of PPs through foaming, filling and reinforcing with respect to target applications. Special attention is paid to descriptions and models of properties as a function of morphological variables. Last but not least, the book suggests potential practical applications of PP-based systems, especially in the packaging, appliances, building/construction, textile and automotive sectors. Each chapter, written by internationally respected scientists, reflects the current state-of-art in the respective field and offers a vital source of information for students, researchers and engineers interested in the morphology, properties, testing and modeling of PP and PP-based systems. The content is indispensable to the appropriate application of PPs and related composites.
Download or read book Engineered Materials Abstracts written by and published by . This book was released on 1992 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis and Performance of Fiber Composites written by Bhagwan D. Agarwal and published by Wiley-Interscience. This book was released on 1990-10-08 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Having fully established themselves as workable engineering materials, composite materials are now increasingly commonplace around the world. Serves as both a text and reference guide to the behavior of composite materials in different engineering applications. Revised for this Second Edition, the text includes a general discussion of composites as material, practical aspects of design and performance, and further analysis that will be helpful to those engaged in research on composites. Each chapter closes with references for further reading and a set of problems that will be useful in developing a better understanding of the subject.
Download or read book Mechanical Behaviour of Engineering Materials written by Joachim Roesler and published by Springer Science & Business Media. This book was released on 2007-10-16 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: How do engineering materials deform when bearing mechanical loads? To answer this crucial question, the book bridges the gap between continuum mechanics and materials science. The different kinds of material deformation are explained in detail. The book also discusses the physical processes occurring during the deformation of all classes of engineering materials and shows how these materials can be strengthened to meet the design requirements. It provides the knowledge needed in selecting the appropriate engineering material for a certain design problem. This book is both a valuable textbook and a useful reference for graduate students and practising engineers.
Download or read book Fracture Mechanical Behavior of Short Fiber Reinforced Thermoplastics written by Klaus Friedrich and published by . This book was released on 1984 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Transfer in Polymer Composite Materials written by Nicolas Boyard and published by John Wiley & Sons. This book was released on 2016-03-28 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses general information, good practices and examples about thermo-physical properties, thermo-kinetic and thermo-mechanical couplings, instrumentation in thermal science, thermal optimization and infrared radiation.
Download or read book Deformation Kinetics written by A. S. Krausz and published by Wiley-Interscience. This book was released on 1975 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Composite Materials written by Luigi Nicolais and published by Springer Science & Business Media. This book was released on 2011-05-18 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite Materials presents recent developments and state-of-the-art achievements in the science and technology of composites. It identifies and discusses key and emerging issues for future progress in the multidisciplinary field of composites. By bringing together leading experts and promising innovators from research institutions and academia, Composite Materials highlights unresolved issues and identifies opportunities for long-term research needs to provide the reader with a vision for the future in various fields of application of composite materials. A few of the many future directions highlighted in the book are increasingly multifunctional properties; complex, hybrid and nanoreinforced materials; and tailoring in multiple dimensions and directions. The wider areas covered include, but are not limited to, the following: biomedical engineering, civil engineering, aerospace engineering, automotive engineering, and naval engineering. Composite Materials is designed to increase the reader’s understanding of the state of the art of composite materials in a variety of industrial sectors and to explore future needs and opportunities. It will therefore be of use to professionals working in the composites industry, research centers, and academia, who already have a graduate-level knowledge of composite materials.
