Download or read book Magnetoelectric Composites written by Mirza I. Bichurin and published by CRC Press. This book was released on 2019-02-22 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is dedicated to modeling and application of magnetoelectric (ME) effects in layered and bulk composites based on magnetostrictive and piezoelectric materials. Currently, numerous theoretical and experimental studies on ME composites are available but few on the development and research of instruments based on them. So far, only investigation of ME magnetic field sensors has been cited in the existing literature. However, these studies have finally resulted in the creation of low-frequency ME magnetic field sensors with parameters substantially exceeding the characteristics of Hall sensors. The book presents the authors’ many years of experience gained in ME composites and through creation of device models based on their studies. It describes low-frequency ME devices, such as current and position sensors and energy harvesters, and microwave ME devices, such as antennas, attenuators, filters, gyrators, and phase shifters.
Download or read book Integrated Multiferroic Heterostructures and Applications written by Ming Liu and published by John Wiley & Sons. This book was released on 2019-08-05 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by well-known experts in the field, this first systematic overview of multiferroic heterostructures summarizes the latest developments, first presenting the fundamental mechanisms, including multiferroic materials synthesis, structures and mechanisms, before going on to look at device applications. The resulting text offers insight and understanding for scientists and students new to this area.
Download or read book Nanostructures and Thin Films for Multifunctional Applications written by Ion Tiginyanu and published by Springer. This book was released on 2016-04-02 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is focused on recent advances in the development of thin films for photovoltaic applications, TiO2/WO3 bi-layers for applications with enhanced photo-catalytic properties, nanometer oxide and hydroxide films for anticorrosive coatings, surface passivation in chemical industries, micro- and nanoelectronics, trilayers of metglas and lead free piezoelectrics for magnetic field sensors, current sensors, spintronics, microwave and read/write devices. Diluted ferromagnetic alloy films are also considered for superconducting spintronics based on superconducting spin-valves. Thermal properties of segmented nanowires are analyzed with respect to thermoelectric applications. Recent advances in template production of nanocomposites are also reviewed with particular focus on technologies for template assisted formation of metal nanotubes. Some elements related to abrasive flow machining (AFM), specifically state of the art elements of technological systems and construction of equipment are presented. The book is written for researchers in materials science, nanotechnologies, PhD students and graduate student.
Download or read book Ferrites and Multiferroics written by Gagan Kumar Bhargava and published by Springer Nature. This book was released on 2021-12-16 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the fundamentals of ferrites and multiferroic materials with special attention to their structure, types, and properties. It presents a comprehensive survey about ferrite and multiferroic materials, in areas significant to research and development in academia as well as in industry. The book discusses various types of methods applied for their synthesis and characterizations. This book is concerned with the fascinating class of materials with the promise for wide-ranging applications, including electromagnets, magnetic fluid hyperthermia, antenna applications, memory devices, switching circuits, bio-medical applications, actuators, magnetic field sensors and water purification, etc.
Download or read book Nanoscale Ferroelectrics and Multiferroics written by Miguel Alguero and published by John Wiley & Sons. This book was released on 2016-03-21 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two volume set reviews the key issues in processing and characterization of nanoscale ferroelectrics and multiferroics, and provides a comprehensive description of their properties, with an emphasis in differentiating size effects of extrinsic ones like boundary or interface effects. Recently described nanoscale novel phenomena are also addressed. Organized into three parts it addresses key issues in processing (nanostructuring), characterization (of the nanostructured materials) and nanoscale effects. Taking full advantage of the synergies between nanoscale ferroelectrics and multiferroics, the text covers materials nanostructured at all levels, from ceramic technologies like ferroelectric nanopowders, bulk nanostructured ceramics and thick films, and magnetoelectric nanocomposites, to thin films, either polycrystalline layer heterostructures or epitaxial systems, and to nanoscale free standing objects with specific geometries, such as nanowires and tubes at different levels of development. This set is developed from the high level European scientific knowledge platform built within the COST (European Cooperation in Science and Technology) Action on Single and multiphase ferroics and multiferroics with restricted geometries (SIMUFER, ref. MP0904). Chapter contributors have been carefully selected, and have all made major contributions to knowledge of the respective topics, and overall, they are among most respected scientists in the field.
Download or read book Nanostructured Multiferroics written by Raneesh Balakrishnan and published by John Wiley & Sons. This book was released on 2021-06-01 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the state of the art in multiferroic materials with this cutting-edge resource Nanostructured Multiferroics delivers an overview of recent research developments in the area of nanostructured multiferroics, along with their preparation, characterization, and applications. Covering single-phase and composite multiferroics, nanomultiferroics, and multiferroic composites, the book explains their physical properties, the underlying physical principles, and the technology and application aspects of the materials, including energy harvesting and spintronics. With multiferroics undergoing a renaissance of renewed interest and development in the past few years, and with promising new breakthroughs in areas like superconductivity, spintronics, and quantum computing, Nanostructured Multiferroics offers both experienced scientists and young researchers inspirational and informative resources likely to spark ideas for further research. Along with chapters discussing topics such as the specific heat and magnetocaloric properties of manganite-based multiferroics for cryo-cooling applications and the multiferroic properties of barium-doped BiFeO3 particles, further topics are: * A comprehensive discussion about the physical properties of multiferroic nanocomposites * An exploration of the basic theory underpinning a variety of multiferroic interactions * An in-depth analysis of the engineering functionality in nanomultiferroics * An introduction to nanostructured multiferroics accompanied by discussions of their synthesis, characterization, and common applications * A treatment of multiferroic materials, as well as single-phase and composite multiferroics * An examination of the use of nanostructured multiferroics in the field of spintronics Perfect for materials scientists, Nanostructured Multiferroics will also earn a place in the libraries of solid-state physicists and chemists who seek to improve their understanding of the fundamentals of, and recent advances made in, multiferroics. The information contained within will inform anyone working in areas involving superconductivity, quantum computing, and spintronics.
Download or read book Magnetoelectric Polymer Based Composites written by Senentxu Lanceros-Méndez and published by John Wiley & Sons. This book was released on 2017-06-21 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book on this topic provides a comprehensive and well-structured overview of the fundamentals, synthesis and emerging applications of magnetoelectric polymer materials. Following an introduction to the basic aspects of polymer based magnetoelectric materials and recent developments, subsequent chapters discuss the various types as well as their synthesis and characterization. There then follows a review of the latest applications, such as memories, sensors and actuators. The book concludes with a look at future technological advances. An essential reference for entrants to the field as well as for experienced researchers.
Download or read book Multiferroic Materials written by Junling Wang and published by CRC Press. This book was released on 2016-10-14 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: "a very detailed book on multiferroics that will be useful for PhD students and researchers interested in this emerging field of materials science" —Dr. Wilfrid Prellier, Research Director, CNRS, Caen, France Multiferroics has emerged as one of the hottest topics in solid state physics in this millennium. The coexistence of multiple ferroic/antiferroic properties makes them useful both for fundamental studies and practical applications such as revolutionary new memory technologies and next-generation spintronics devices. This book provides an historical introduction to the field, followed by a summary of recent progress in single-phase multiferroics (type-I and type-II), multiferroic composites (bulk and nano composites), and emerging areas such as domain walls and vortices. Each chapter addresses potential technological implications. There is also a section dedicated to theoretical approaches, both phenomenological and first-principles calculations.
Download or read book Nanomagnetic and Spintronic Devices for Energy Efficient Memory and Computing written by Jayasimha Atulasimha and published by John Wiley & Sons. This book was released on 2016-03-07 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomagnetic and spintronic computing devices are strong contenders for future replacements of CMOS. This is an important and rapidly evolving area with the semiconductor industry investing significantly in the study of nanomagnetic phenomena and in developing strategies to pinpoint and regulate nanomagnetic reliably with a high degree of energy efficiency. This timely book explores the recent and on-going research into nanomagnetic-based technology. Key features: Detailed background material and comprehensive descriptions of the current state-of-the-art research on each topic. Focuses on direct applications to devices that have potential to replace CMOS devices for computing applications such as memory, logic and higher order information processing. Discusses spin-based devices where the spin degree of freedom of charge carriers are exploited for device operation and ultimately information processing. Describes magnet switching methodologies to minimize energy dissipation. Comprehensive bibliographies included for each chapter enabling readers to conduct further research in this field. Written by internationally recognized experts, this book provides an overview of a rapidly burgeoning field for electronic device engineers, field-based applied physicists, material scientists and nanotechnologists. Furthermore, its clear and concise form equips readers with the basic understanding required to comprehend the present stage of development and to be able to contribute to future development. Nanomagnetic and Spintronic Devices for Energy-Efficient Memory and Computing is also an indispensable resource for students and researchers interested in computer hardware, device physics and circuits design.
Download or read book Composite Magnetoelectrics written by Nian Sun and published by Elsevier. This book was released on 2015-05-11 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite Magnetoelectrics: Materials, Structures, and Applications gives the reader a summary of the theory behind magnetoelectric phenomena, later introducing magnetoelectric materials and structures and the techniques used to fabricate and characterize them. Part two of the book looks at magnetoelectric devices. Applications include magnetic and current sensors, transducers for energy harvesting, microwave and millimeter wave devices, miniature antennas and medical imaging. The final chapter discusses progress towards magnetoelectric memory. - Summarises clearly the theory behind magnetoelectric phenomena - Strong coverage of fabrication and characterisation techniques - Reviews a broad range of current and potential magnetoelectric devices
Download or read book Magnetoelectric Polymer Based Composites written by Senentxu Lanceros-Méndez and published by John Wiley & Sons. This book was released on 2017-10-23 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book on this topic provides a comprehensive and well-structured overview of the fundamentals, synthesis and emerging applications of magnetoelectric polymer materials. Following an introduction to the basic aspects of polymer based magnetoelectric materials and recent developments, subsequent chapters discuss the various types as well as their synthesis and characterization. There then follows a review of the latest applications, such as memories, sensors and actuators. The book concludes with a look at future technological advances. An essential reference for entrants to the field as well as for experienced researchers.
Download or read book HFI NQI 2007 written by Alberto Pasquevich and published by Springer Science & Business Media. This book was released on 2010-04-08 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of proceedings includes new and original scientific results along with recent developments in instrumentation and methods, in invited and contributed papers. Researchers and graduate students interested in hyperfine interaction detected by nuclear radiation as well as nuclear quadrupole interactions detected by resonance methods in the areas of materials, biological and medical science will find this volume indispensable.
Download or read book Encyclopedia of Interfacial Chemistry written by and published by Elsevier. This book was released on 2018-03-29 with total page 5276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encyclopedia of Interfacial Chemistry: Surface Science and Electrochemistry, Seven Volume Set summarizes current, fundamental knowledge of interfacial chemistry, bringing readers the latest developments in the field. As the chemical and physical properties and processes at solid and liquid interfaces are the scientific basis of so many technologies which enhance our lives and create new opportunities, its important to highlight how these technologies enable the design and optimization of functional materials for heterogeneous and electro-catalysts in food production, pollution control, energy conversion and storage, medical applications requiring biocompatibility, drug delivery, and more. This book provides an interdisciplinary view that lies at the intersection of these fields. Presents fundamental knowledge of interfacial chemistry, surface science and electrochemistry and provides cutting-edge research from academics and practitioners across various fields and global regions
Download or read book Chemical Technology and Informatics in Chemistry with Applications written by Alexander V. Vakhrushev and published by CRC Press. This book was released on 2019-01-15 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume reflects the huge breadth and diversity in research and the application of industrial and engineering chemistry and cheminformatics. The book presents cutting-edge research developments and new insights that emphasize the vibrancy of industrial and engineering chemistry and cheminformatics today. The first section of the book focuses on new insights in engineering chemistry while the second part looks at the promising future and novel approaches in chemical informatics, which has vast implications for industrial and pharmaceutical applications. Several chapters examine various industrial processes for emerging materials and determine practical use under a wide range of conditions, helping to establish what is needed to produce a new generation of materials.
Download or read book Bismuth written by Yanhua Luo and published by BoD – Books on Demand. This book was released on 2020-12-02 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bismuth—a wonder metal with unique features—plays an important role in the bismuth-related optoelectronic materials. The innovative development of bismuth optoelectronic materials will undoubtedly drive the social development and economic growth in the world towards a glorious future.
Download or read book Handbook of Laser Micro and Nano Engineering written by KOJI SUGIOKA. and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides a comprehensive review of the entire field of laser micro and nano processing, including not only a detailed introduction to individual laser processing techniques but also the fundamentals of laser-matter interaction and lasers, optics, equipment, diagnostics, as well as monitoring and measurement techniques for laser processing. Consisting of 11 sections, each composed of 4 to 6 chapters written by leading experts in the relevant field. Each main part of the handbook is supervised by its own part editor(s) so that high-quality content as well as completeness are assured. The book provides essential scientific and technical information to researchers and engineers already working in the field as well as students and young scientists planning to work in the area in the future. Lasers found application in materials processing practically since their invention in 1960, and are currently used widely in manufacturing. The main driving force behind this fact is that the lasers can provide unique solutions in material processing with high quality, high efficiency, high flexibility, high resolution, versatility and low environmental load. Macro-processing based on thermal process using infrared lasers such as CO2 lasers has been the mainstream in the early stages, while research and development of micro- and nano-processing are becoming increasingly more active as short wavelength and/or short pulse width lasers have been developed. In particular, recent advances in ultrafast lasers have opened up a new avenue to laser material processing due to the capabilities of ultrahigh precision micro- and nanofabrication of diverse materials. This handbook is the first book covering the basics, the state-of-the-art and important applications of the dynamic and rapidly expanding discipline of laser micro- and nanoengineering. This comprehensive source makes readers familiar with a broad spectrum of approaches to solve all relevant problems in science and technology. This handbook is the ultimate desk reference for all people working in the field.
Download or read book Handbook of Magnetic Materials written by Ekkes H. Brück and published by Elsevier. This book was released on 2020-11-29 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Magnetic Materials, Volume 29, highlights new advances in the field, with this new volume presenting interesting chapters written by an international board of authors on topics such as spin-orbit torque. - Provides the authority and expertise of leading contributors from an international board of authors - Presents the latest release in the Handbook of Magnetic Materials series