Download or read book Pressure Fluctuations in Turbulent Boundary Layers written by M. V. Lowson and published by . This book was released on 1965 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wall pressure Fluctuations and Pressure velocity Correlations in a Turbulent Boundary Layer written by John S. Serafini and published by . This book was released on 1963 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: This experimental study was carried out at a free-stream Mach number of 0.6 and a Reynolds number per foot of 3.45 x 106. The magnitudes of the wall-pressure fluctuations agree with the Lilley-Hodgson theoretical results. Space-time correlations of the wall-pressure fluctuations generally agree with Willmarth's results for longitudinal separation distances. The convection velocity of the fluctuations is found to increase with increasing separation distances, and its significance is explained. Measurements with the longitudinal component of the velocity fluctuations indicate that the contributions to the wall-pressure fluctuations are from two regions, an inner region near the wall and an outer region linked with the intermittency.
Download or read book The Structure of Turbulent Shear Flow written by A. A. R. Townsend and published by Cambridge University Press. This book was released on 1976 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Develops a physical theory from the mass of experimental results, with revisions to reflect advances of recent years.
Download or read book Boundary Layer Theory written by Hermann Schlichting (Deceased) and published by Springer. This book was released on 2016-10-04 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of the near-legendary textbook by Schlichting and revised by Gersten presents a comprehensive overview of boundary-layer theory and its application to all areas of fluid mechanics, with particular emphasis on the flow past bodies (e.g. aircraft aerodynamics). The new edition features an updated reference list and over 100 additional changes throughout the book, reflecting the latest advances on the subject.
Download or read book Wall pressure Fluctuations and Pressure velocity Correlations in a Turbulent Boundary Layer written by John S. Serafini and published by . This book was released on 1963 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: This experimental study was carried out at a free-stream Mach number of 0.6 and a Reynolds number per foot of 3.45 x 106. The magnitudes of the wall-pressure fluctuations agree with the Lilley-Hodgson theoretical results. Space-time correlations of the wall-pressure fluctuations generally agree with Willmarth's results for longitudinal separation distances. The convection velocity of the fluctuations is found to increase with increasing separation distances, and its significance is explained. Measurements with the longitudinal component of the velocity fluctuations indicate that the contributions to the wall-pressure fluctuations are from two regions, an inner region near the wall and an outer region linked with the intermittency.
Download or read book Turbulent Shear Flows 8 written by Franz Durst and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a selection of the papers presented at the Eighth Symposium on Turbulent Shear Flows held at the Technical University of Munich, 9-11 September 1991. The first of these biennial international symposia was held at the Pennsylvania State Uni versity, USA, in 1977; subsequent symposia have been held at Imperial College, London, England; the University of California, Davis, USA; the University of Karlsruhe, Ger many; Cornell University, Ithaca, USA; the Paul Sabatier University, Toulouse, France; and Stanford University, California, USA. The purpose of this series of symposia is to provide a forum for the presentation and discussion of new developments in the field of turbulence, especially as related to shear flows of importance in engineering and geo physics. From the 330 extended abstracts submitted for this symposium, 145 papers were presented orally and 60 as posters. Out of these, we have selected twenty-four papers for inclusion in this volume, each of which has been revised and extended in accordance with the editors' recommendations. The following four theme areas were selected after consideration of the quality of the contributions, the importance of the area, and the selection made in earlier volumes: - wall flows, - separated flows, - compressibility effects, - buoyancy, rotation, and curvature effects. As in the past, each section corresponding to the above areas begins with an introduction by an authority in the field that places the individual contributions in context with one another and with related research.
Download or read book Shock Wave Boundary Layer Interactions written by Holger Babinsky and published by Cambridge University Press. This book was released on 2011-09-12 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shock wave-boundary-layer interaction (SBLI) is a fundamental phenomenon in gas dynamics that is observed in many practical situations, ranging from transonic aircraft wings to hypersonic vehicles and engines. SBLIs have the potential to pose serious problems in a flowfield; hence they often prove to be a critical - or even design limiting - issue for many aerospace applications. This is the first book devoted solely to a comprehensive, state-of-the-art explanation of this phenomenon. It includes a description of the basic fluid mechanics of SBLIs plus contributions from leading international experts who share their insight into their physics and the impact they have in practical flow situations. This book is for practitioners and graduate students in aerodynamics who wish to familiarize themselves with all aspects of SBLI flows. It is a valuable resource for specialists because it compiles experimental, computational and theoretical knowledge in one place.
Download or read book Twenty Third Symposium on Naval Hydrodynamics written by National Research Council and published by National Academies Press. This book was released on 2002-01-01 with total page 1024 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Vive la Revolution!" was the theme of the Twenty-Third Symposium on Naval Hydrodynamics held in Val de Reuil, France, from September 17-22, 2000 as more than 140 experts in ship design, construction, and operation came together to exchange naval research developments. The forum encouraged both formal and informal discussion of presented papers, and the occasion provides an opportunity for direct communication between international peers. This book includes sixty-three papers presented at the symposium which was organized jointly by the Office of Naval Research, the National Research Council (Naval Studies Board), and the Bassin d'Essais des Carènes. This book includes the ten topical areas discussed at the symposium: wave-induced motions and loads, hydrodynamics in ship design, propulsor hydrodynamics and hydroacoustics, CFD validation, viscous ship hydrodynamics, cavitation and bubbly flow, wave hydrodynamics, wake dynamics, shallow water hydrodynamics, and fluid dynamics in the naval context.
Download or read book Turbulent Shear Layers in Supersonic Flow written by Alexander J. Smits and published by Springer Science & Business Media. This book was released on 2006-05-11 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: A good understanding of turbulent compressible flows is essential to the design and operation of high-speed vehicles. Such flows occur, for example, in the external flow over the surfaces of supersonic aircraft, and in the internal flow through the engines. Our ability to predict the aerodynamic lift, drag, propulsion and maneuverability of high-speed vehicles is crucially dependent on our knowledge of turbulent shear layers, and our understanding of their behavior in the presence of shock waves and regions of changing pressure. Turbulent Shear Layers in Supersonic Flow provides a comprehensive introduction to the field, and helps provide a basis for future work in this area. Wherever possible we use the available experimental work, and the results from numerical simulations to illustrate and develop a physical understanding of turbulent compressible flows.
Download or read book Fluctuating Properties of Turbulent Boundary Layers for Mach Numbers Up to 9 written by William D. Harvey and published by . This book was released on 1969 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluctuating properties of turbulent boundary layers for Mach numbers up to 9.
Download or read book Turbulent Shear Flows 5 written by Franz Durst and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first four symposia in the series on turbulent shear flows have been held alternately in the United States and Europe with the first and third being held at universities in eastern and western States, respectively. Continuing this pattern, the Fifth Symposium on Turbulent Shear Flows was held at Cornell University, Ithaca, New York, in August 1985. The meeting brought together more than 250 participants from around the world to present the results of new research on turbulent shear flows. It also provided a forum for lively discussions on the implications (practical or academic) of some of the papers. Nearly 100 formal papers and about 20 shorter communications in open forums were presented. In all the areas covered, the meeting helped to underline the vitality of current research into turbulent shear flows whether in experimental, theoretical or numerical studies. The present volume contains 25 of the original symposium presentations. All have been further reviewed and edited and several have been considerably extended since their first presentation. The editors believe that the selection provides papers of archival value that, at the same time, give a representative statement of current research in the four areas covered by this book: - Homogeneous and Simple Flows - Free Flows - Wall Flows - Reacting Flows Each of these sections begins with an introductory article by a distinguished worker in the field.
Download or read book Aeroacoustics of Low Mach Number Flows written by Stewart Glegg and published by Academic Press. This book was released on 2017-02-15 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aeroacoustics of Low Mach Number Flows: Fundamentals, Analysis, and Measurement provides a comprehensive treatment of sound radiation from subsonic flow over moving surfaces, which is the most widespread cause of flow noise in engineering systems. This includes fan noise, rotor noise, wind turbine noise, boundary layer noise, and aircraft noise. Beginning with fluid dynamics, the fundamental equations of aeroacoustics are derived and the key methods of solution are explained, focusing both on the necessary mathematics and physics. Fundamentals of turbulence and turbulent flows, experimental methods and numerous applications are also covered. The book is an ideal source of information on aeroacoustics for researchers and graduate students in engineering, physics, or applied math, as well as for engineers working in this field. Supplementary material for this book is provided by the authors on the website www.aeroacoustics.net. The website provides educational content designed to help students and researchers in understanding some of the principles and applications of aeroacoustics, and includes example problems, data, sample codes, course plans and errata. The website is continuously being reviewed and added to. Explains the key theoretical tools of aeroacoustics, from Lighthill’s analogy to the Ffowcs Williams and Hawkings equation Provides detailed coverage of sound from lifting surfaces, boundary layers, rotating blades, ducted fans and more Presents the fundamentals of sound measurement and aeroacoustic wind tunnel testing
Download or read book Intermediate Fluid Mechanics written by James Liburdy and published by . This book was released on 2021-09-16 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A First Course in Turbulence written by Henk Tennekes and published by MIT Press. This book was released on 2018-04-27 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book specifically designed to offer the student a smooth transitionary course between elementary fluid dynamics (which gives only last-minute attention to turbulence) and the professional literature on turbulent flow, where an advanced viewpoint is assumed. The subject of turbulence, the most forbidding in fluid dynamics, has usually proved treacherous to the beginner, caught in the whirls and eddies of its nonlinearities and statistical imponderables. This is the first book specifically designed to offer the student a smooth transitionary course between elementary fluid dynamics (which gives only last-minute attention to turbulence) and the professional literature on turbulent flow, where an advanced viewpoint is assumed. Moreover, the text has been developed for students, engineers, and scientists with different technical backgrounds and interests. Almost all flows, natural and man-made, are turbulent. Thus the subject is the concern of geophysical and environmental scientists (in dealing with atmospheric jet streams, ocean currents, and the flow of rivers, for example), of astrophysicists (in studying the photospheres of the sun and stars or mapping gaseous nebulae), and of engineers (in calculating pipe flows, jets, or wakes). Many such examples are discussed in the book. The approach taken avoids the difficulties of advanced mathematical development on the one side and the morass of experimental detail and empirical data on the other. As a result of following its midstream course, the text gives the student a physical understanding of the subject and deepens his intuitive insight into those problems that cannot now be rigorously solved. In particular, dimensional analysis is used extensively in dealing with those problems whose exact solution is mathematically elusive. Dimensional reasoning, scale arguments, and similarity rules are introduced at the beginning and are applied throughout. A discussion of Reynolds stress and the kinetic theory of gases provides the contrast needed to put mixing-length theory into proper perspective: the authors present a thorough comparison between the mixing-length models and dimensional analysis of shear flows. This is followed by an extensive treatment of vorticity dynamics, including vortex stretching and vorticity budgets. Two chapters are devoted to boundary-free shear flows and well-bounded turbulent shear flows. The examples presented include wakes, jets, shear layers, thermal plumes, atmospheric boundary layers, pipe and channel flow, and boundary layers in pressure gradients. The spatial structure of turbulent flow has been the subject of analysis in the book up to this point, at which a compact but thorough introduction to statistical methods is given. This prepares the reader to understand the stochastic and spectral structure of turbulence. The remainder of the book consists of applications of the statistical approach to the study of turbulent transport (including diffusion and mixing) and turbulent spectra.
Download or read book Boundary Layer Flows written by Vallampati Ramachandra Prasad and published by BoD – Books on Demand. This book was released on 2020-01-22 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by experts in the field, this book, "Boundary Layer Flows - Theory, Applications, and Numerical Methods" provides readers with the opportunity to explore its theoretical and experimental studies and their importance to the nonlinear theory of boundary layer flows, the theory of heat and mass transfer, and the dynamics of fluid. With the theory's importance for a wide variety of applications, applied mathematicians, scientists, and engineers - especially those in fluid dynamics - along with engineers of aeronautics, will undoubtedly welcome this authoritative, up-to-date book.
Download or read book An Introduction to Turbulence and its Measurement written by P Bradshaw and published by Elsevier. This book was released on 2013-10-22 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Turbulence and Its Measurement is an introductory text on turbulence and its measurement. It combines the physics of turbulence with measurement techniques and covers topics ranging from measurable quantities and their physical significance to the analysis of fluctuating signals, temperature and concentration measurements, and the hot-wire anemometer. Examples of turbulent flows are presented. This book is comprised of eight chapters and begins with an overview of the physics of turbulence, paying particular attention to Newton's second law of motion, the Newtonian viscous fluid, and equations of motion. After a chapter devoted to measurable quantities, the discussion turns to some examples of turbulent flows, including turbulence behind a grid of bars, Couette flow, atmospheric and oceanic turbulence, and heat and mass transfer. The next chapter describes measurement techniques using hot wires, films, and thermistors, as well as Doppler-shift anemometers; glow-discharge or corona-discharge anemometers; pulsed-wire anemometer; and steady-flow techniques for fluctuation measurement. This monograph is intended for post-graduate students of aeronautics and fluid mechanics, but should also be readily understandable to those with a good general background in engineering fluid dynamics.
Download or read book Fluid Mechanics for Engineers written by Meinhard T. Schobeiri and published by Springer Science & Business Media. This book was released on 2010-03-27 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contents of this book covers the material required in the Fluid Mechanics Graduate Core Course (MEEN-621) and in Advanced Fluid Mechanics, a Ph. D-level elective course (MEEN-622), both of which I have been teaching at Texas A&M University for the past two decades. While there are numerous undergraduate fluid mechanics texts on the market for engineering students and instructors to choose from, there are only limited texts that comprehensively address the particular needs of graduate engineering fluid mechanics courses. To complement the lecture materials, the instructors more often recommend several texts, each of which treats special topics of fluid mechanics. This circumstance and the need to have a textbook that covers the materials needed in the above courses gave the impetus to provide the graduate engineering community with a coherent textbook that comprehensively addresses their needs for an advanced fluid mechanics text. Although this text book is primarily aimed at mechanical engineering students, it is equally suitable for aerospace engineering, civil engineering, other engineering disciplines, and especially those practicing professionals who perform CFD-simulation on a routine basis and would like to know more about the underlying physics of the commercial codes they use. Furthermore, it is suitable for self study, provided that the reader has a sufficient knowledge of calculus and differential equations. In the past, because of the lack of advanced computational capability, the subject of fluid mechanics was artificially subdivided into inviscid, viscous (laminar, turbulent), incompressible, compressible, subsonic, supersonic and hypersonic flows.
