Download or read book On Non convergence of Adjoint Semigroups for Control Systems with Delays written by John Burns and published by . This book was released on 1987 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is shown that the adjoints of a spline based approximation scheme for delay equations do not converge strongly. Keywords: Delay equation, Spline approximation.
Download or read book Control of Systems with Aftereffect written by Vladimir Borisovich Kolmanovskiĭ and published by American Mathematical Soc.. This book was released on 1996-01-01 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deterministic and stochastic control systems with aftereffect are considered. Necessary and sufficient conditions for the optimality of such systems are obtained. Various methods for the construction of exact and approximate solutions of optimal control problems are suggested. Problems of adaptive control for systems with aftereffect are analyzed. Numerous applications are described. The book can be used by researchers, engineers, and graduate students working in optimal control theory and various applications.
Download or read book Computation and Control II written by Kenneth L. Bowers and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a collection of papers delivered by the partici pants at the second Conference on Computation and Control held at Mon tana State University in Bozeman, Montana from August 1-7, 1990. The conference, as well as this proceedings, attests to the vitality and cohesion between the control theorist and the numerical analyst that was adver tised by the first Conference on Computation and Control in 1988. The proceedings of that initial conference was published by Birkhiiuser Boston as the first volume of this same series entitled Computation and Control, Proceedings of the Bozeman Conference, Bozeman, Montana, 1988. Control theory and numerical analysis are both, by their very nature, interdisciplinary subjects as evidenced by their interaction with other fields of mathematics and engineering. While it is clear that new control or es timation algorithms and new feedback design methodologies will need to be implemented computationally, it is likewise clear that new problems in computational mathematics arise when implementing a new generation of control algorithms. For these reasons, computational mathematics is mov ing to the forefront in recent developments in modern control theory and conversely control theory and its applications continue to be a fertile area for computationalists. This volume contains a representative cross section of the interdisciplinary blend of analytic and numerical techniques that of ten occur between advanced control design and practical numerical solution of lumped and distributed parameter systems.
Download or read book Transition and Turbulence Control written by Mohamed Gad-el-Hak and published by World Scientific. This book was released on 2006 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains articles based on lectures given at the Workshop on Transition and Turbulence Control, hosted by the Institute for Mathematical Sciences, National University of Singapore, 8-10 December 2004. The lecturers included 13 of the world's foremost experts in the control of transitioning and turbulent flows. The chapters cover a wide range of subjects in the broad area of flow control, and will be useful to researchers working in this area in academia, government laboratories and industry. The coverage includes control theory, passive, active and reactive methods for controlling transitional and turbulent wall-bounded flows, noise suppression and mixing enhancement of supersonic turbulent jets, compliant coatings, modern flow diagnostic systems, and swept wing instabilities.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1990 with total page 1036 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 1991 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monthly Catalogue United States Public Documents written by and published by . This book was released on 1991-03 with total page 1508 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optimal Control of Partial Differential Equations written by Karl-Heinz Hoffmann and published by Birkhäuser. This book was released on 2012-12-06 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of PDE-based control theory and the corresponding numerical algorithms to industrial problems have become increasingly important in recent years. This volume offers a wide spectrum of aspects of the discipline, and is of interest to mathematicians and scientists working in the field.
Download or read book Technical Reports Awareness Circular TRAC written by and published by . This book was released on 1988-07 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Control Systems Handbook written by William S. Levine and published by CRC Press. This book was released on 2018-10-03 with total page 1800 pages. Available in PDF, EPUB and Kindle. Book excerpt: At publication, The Control Handbook immediately became the definitive resource that engineers working with modern control systems required. Among its many accolades, that first edition was cited by the AAP as the Best Engineering Handbook of 1996. Now, 15 years later, William Levine has once again compiled the most comprehensive and authoritative resource on control engineering. He has fully reorganized the text to reflect the technical advances achieved since the last edition and has expanded its contents to include the multidisciplinary perspective that is making control engineering a critical component in so many fields. Now expanded from one to three volumes, The Control Handbook, Second Edition organizes cutting-edge contributions from more than 200 leading experts. The third volume, Control System Advanced Methods, includes design and analysis methods for MIMO linear and LTI systems, Kalman filters and observers, hybrid systems, and nonlinear systems. It also covers advanced considerations regarding — Stability Adaptive controls System identification Stochastic control Control of distributed parameter systems Networks and networked controls As with the first edition, the new edition not only stands as a record of accomplishment in control engineering but provides researchers with the means to make further advances. Progressively organized, the first two volumes in the set include: Control System Fundamentals Control System Applications
Download or read book Computational Methods for Optimal Design and Control written by J. Borggaard and published by Springer Science & Business Media. This book was released on 1998-10-23 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the Second International Workshop on Optimal Design and Control, held in Arlington, Virginia, 30 September-3 Octo ber, 1997. The First Workshop was held in Blacksburg, Virginia in 1994. The proceedings of that meeting also appeared in the Birkhauser series on Progress in Systems and Control Theory and may be obtained through Birkhauser. These workshops were sponsored by the Air Force Office of Scientific Re search through the Center for Optimal Design and Control (CODAC) at Vrrginia Tech. The meetings provided a forum for the exchange of new ideas and were designed to bring together diverse viewpoints and to highlight new applications. The primary goal of the workshops was to assess the current status of research and to analyze future directions in optimization based design and control. The present volume contains the technical papers presented at the Second Workshop. More than 65 participants from 6 countries attended the meeting and contributed to its success. It has long been recognized that many modern optimal design problems are best viewed as variational and optimal control problems. Indeed, the famous problem of determining the body of revolution that produces a minimum drag nose shape in hypersonic How was first proposed by Newton in 1686. Optimal control approaches to design can provide theoretical and computational insight into these problems. This volume contains a number of papers which deal with computational aspects of optimal control.
Download or read book The Control Handbook three volume set written by William S. Levine and published by CRC Press. This book was released on 2018-10-08 with total page 3526 pages. Available in PDF, EPUB and Kindle. Book excerpt: At publication, The Control Handbook immediately became the definitive resource that engineers working with modern control systems required. Among its many accolades, that first edition was cited by the AAP as the Best Engineering Handbook of 1996. Now, 15 years later, William Levine has once again compiled the most comprehensive and authoritative resource on control engineering. He has fully reorganized the text to reflect the technical advances achieved since the last edition and has expanded its contents to include the multidisciplinary perspective that is making control engineering a critical component in so many fields. Now expanded from one to three volumes, The Control Handbook, Second Edition brilliantly organizes cutting-edge contributions from more than 200 leading experts representing every corner of the globe. They cover everything from basic closed-loop systems to multi-agent adaptive systems and from the control of electric motors to the control of complex networks. Progressively organized, the three volume set includes: Control System Fundamentals Control System Applications Control System Advanced Methods Any practicing engineer, student, or researcher working in fields as diverse as electronics, aeronautics, or biomedicine will find this handbook to be a time-saving resource filled with invaluable formulas, models, methods, and innovative thinking. In fact, any physicist, biologist, mathematician, or researcher in any number of fields developing or improving products and systems will find the answers and ideas they need. As with the first edition, the new edition not only stands as a record of accomplishment in control engineering but provides researchers with the means to make further advances.
Download or read book Controller Design for Distributed Parameter Systems written by Kirsten A. Morris and published by Springer Nature. This book was released on 2020-06-01 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses controller and estimator design for systems that vary both spatially and in time: systems like fluid flow, acoustic noise and flexible structures. It includes coverage of the selection and placement of actuators and sensors for such distributed-parameter systems. The models for distributed parameter systems are coupled ordinary/partial differential equations. Approximations to the governing equations, often of very high order, are required and this complicates both controller design and optimization of the hardware locations. Control system and estimator performance depends not only on the controller/estimator design but also on the location of the hardware. In helping the reader choose the best location for actuators and sensors, the analysis provided in this book is crucial because neither intuition nor trial-and-error is foolproof, especially where multiple sensors and actuators are required, and moving hardware can be difficult and costly. The mechatronic approach advocated, in which controller design is integrated with actuator location, can lead to better performance without increased cost. Similarly, better estimation can be obtained with carefully placed sensors. The text shows how proper hardware placement varies depending on whether, disturbances are present, whether the response should be reduced to an initial condition or whether controllability and/or observability have to be optimized. This book is aimed at non-specialists interested in learning controller design for distributed-parameter systems and the material presented has been used for student teaching. The relevant basic systems theory is presented and followed by a description of controller synthesis using lumped approximations. Numerical algorithms useful for efficient implementation in real engineering systems and practical computational challenges are also described and discussed.
Download or read book SIAM Journal on Control and Optimization written by Society for Industrial and Applied Mathematics and published by . This book was released on 1998 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Theory of Functional Differential Equations written by V. Kolmanovskii and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides an introduction to the properties of functional differential equations and their applications in diverse fields such as immunology, nuclear power generation, heat transfer, signal processing, medicine and economics. In particular, it deals with problems and methods relating to systems having a memory (hereditary systems). The book contains eight chapters. Chapter 1 explains where functional differential equations come from and what sort of problems arise in applications. Chapter 2 gives a broad introduction to the basic principle involved and deals with systems having discrete and distributed delay. Chapters 3-5 are devoted to stability problems for retarded, neutral and stochastic functional differential equations. Problems of optimal control and estimation are considered in Chapters 6-8. For applied mathematicians, engineers, and physicists whose work involves mathematical modeling of hereditary systems. This volume can also be recommended as a supplementary text for graduate students who wish to become better acquainted with the properties and applications of functional differential equations.
Download or read book Differential and Integral Equations written by and published by . This book was released on 1991 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evaluating Derivatives written by Andreas Griewank and published by SIAM. This book was released on 2008-11-06 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title is a comprehensive treatment of algorithmic, or automatic, differentiation. The second edition covers recent developments in applications and theory, including an elegant NP completeness argument and an introduction to scarcity.
