Download or read book On Modelling the Effects of Streamline Curvature on Turbulent Shear Flows written by Bassam A. Younis and published by . This book was released on 1984 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbulent Shear Flows 3 written by L.J.S. Bradbury and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: In spite of intensive efforts over many decades, the problem of turbulence remains as challenging as ever and the number of papers, books and conferences on this topic con tinues to grow. As experimental techniques and computing power have developed, the breadth of investigations into the structure and development of turbulent flows has in creased to encompass many diverse fields of application in engineering, physics, biolo gy and so on. As a consequence, it is now very difficult for a single research worker to keep in touch with the many developments that are taking place in turbulence. One of the few opportunities for obtaining some overall view of the subject arises from large international symposia on turbulence and, although they have some drawbacks, it is this opportunity that is one of their main merits. The International Symposium on Turbulent Shear Flows has now been held on three occasions and they seem to be established as a major opportunity for papers on a very diverse range of topics to be presented at a single meeting. This volume is a collec tion of papers from the third symposium that was held at the University of California, Davis from 9-11 September 1981. The papers are divided into four sections entitled Wall Flows, Scalar Transport, Recirculating Flows and Fundamentals. This collection represents about a third of the total number of papers presented.
Download or read book NASA Technical Paper written by and published by . This book was released on 1985 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbulent Shear Flows I written by F. Durst and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book contains papers that have been selected from contributions to the First International Symposium on Turbulent Shear Flows which was held from the 18th to 20th April 1977 at The Pennsylvania State University, University Park, Pennsylvania, USA. Attend ees from close to 20 countries presented over 100 contributions at this meeting in which many aspects of the current activities in turbulence research were covered. Five topics received particular attention at the Symposium: Free Flows Wall Flows Recirculating Flows Developments in Reynolds Stress Closures New Directions in Modeling This is also reflected in the five chapters of this book with contributions from research workers from different countries. Each chapter covers the most valuable contributions of the conference to the particular chapter topic. Of course, there were many additional good con tributions to each subject at the meeting but the limitation imposed on the length of this volume required that a selection be made. The realization of the First International Symposium on Turbulent Shear Flows was p- sible by the general support of: U. S. Army Research Office U. S. Navy Research Office Continuing Education Center of The Pennsylvania State University The conference organization was carried out by the organizing committee consisting of: F. Durst, Universitat Karlsruhe, Karlsruhe, Fed. Rep. of Germany V. W. Goldschmidt, Purdue University, West Lafayette, Ind. , USA B. E. Launder, University of California, Davis, Calif. , USA F. W. Schmidt, Pennsylvania State University, University Park, Penna.
Download or read book Engineering Turbulence Modelling and Experiments 3 written by G. Bergeles and published by Newnes. This book was released on 2012-12-02 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents and discussses new developments in the area of turbulence modelling and measurements, with particular emphasis on engineering-related problems. At present, turbulence is one of the key issues in tackling engineering flow problems. Powerful computers and numerical methods are now available for solving the flow equations, but the simulation of turbulence effects which are nearly always important in practice, is still in an unsatisfactory state and introduces considerable uncertainities in the accuracy of CFD calculations. These and other aspects of turbulence modelling and measurements are dealt with in detail by experts in the field. The resulting book is an up-to-date review of the most recent research in this exciting area.
Download or read book Atmospheric Boundary Layer Flows written by J. C. Kaimal and published by Oxford University Press. This book was released on 1994-01-06 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Boundary layer meteorology is the study of the physical processes that take place in the layer of air that is most influenced by the earth's underlying surface. This text/reference gives an uncomplicated view of the structure of the boundary layer, the instruments available for measuring its mean and turbulent properties, how best to make the measurements, and ways to process and analyze the data. The main applications of the book are in atmospheric modelling, wind engineering, air pollution, and agricultural meteorology. The authors have pioneered research on atmospheric turbulence and flow, and are noted for their contributions to the study of the boundary layer. This important work will interest atmospheric scientists, meteorologists, and students and faculty in these fields.
Download or read book Structure of Complex Turbulent Shear Flow written by R. Dumas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Symposium on structure of Complex turbulent shear flows was proposed by the "Comite National Fran
Download or read book Computer Modeling of Free Surface and Pressurized Flows written by M. Hanif Chaudhry and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 737 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computers are widely used for the analysis, design, and operation of water resource projects. This gives accurate results, allowing the analysis of complex systems which may not have been possible otherwise, and the investigation and comparison of several different alternatives in a short time, thereby reducing the project costs, optimizing design, and efficient utilization of resources. This volume compiles an edited version of the lecture notes specially prepared by 14 well-known European and North American researchers. Part I deals with free-surface flows. Governing equations are derived and their solution by the finite-difference, finite-element, and boundary-integral methods are discussed. Then, turbulence models, three-dimensional models, dam-break flow models, sediment transport models, and flood routing models are presented. Part II is related to the modeling of steady and transient pressurized flows. Governing equations for both single and two-component flows are derived and numerical methods for their solution are presented. The modeling of water quality in pipe networks, of cooling water systems, and slow and rapid transients is then discussed.
Download or read book Closure Strategies for Turbulent and Transitional Flows written by Brian Edward Launder and published by Cambridge University Press. This book was released on 2002-02-21 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description
Download or read book Modelling Turbulence in Engineering and the Environment written by Kemal Hanjalić and published by Cambridge University Press. This book was released on 2011-10-20 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive account of advanced RANS turbulence models including numerous applications to complex flows in engineering and the environment.
Download or read book Turbulent Shear Flows 7 written by Franz Durst and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Seventh Symposium was held on the campus of Stanford University with·a combination offacilities and weather which made it possible to add open-air poster sessions and coffee breaks to the programme. This was particularly convenient as the call for papers attracted close to three hundred abstracts and a total number of participants well in excess of this number. Some one hundred and thirty papers were presented in carefully phased parallel sessions and thirty six further contributions were made available in the form of posters. In addition, a lively open-forum session allowed additional speakers to make brief presentations. The staff of the Thermo-Sciences Division of the Department of Mechanical Engineering at Stanford undertook the local arrangements with evident success and their extensive record of contributions to Turbulent Shear Flows made the venue particularly appropriate. Also, the Centre for Turbulence Studies, based on the faculty of the University and the NASA Ames Research Center, provided a considerable body of expertise with emphasis on direct numerical stimulation.
Download or read book Modeling Complex Turbulent Flows written by Manuel D. Salas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulence modeling both addresses a fundamental problem in physics, 'the last great unsolved problem of classical physics,' and has far-reaching importance in the solution of difficult practical problems from aeronautical engineering to dynamic meteorology. However, the growth of supercom puter facilities has recently caused an apparent shift in the focus of tur bulence research from modeling to direct numerical simulation (DNS) and large eddy simulation (LES). This shift in emphasis comes at a time when claims are being made in the world around us that scientific analysis itself will shortly be transformed or replaced by a more powerful 'paradigm' based on massive computations and sophisticated visualization. Although this viewpoint has not lacked ar ticulate and influential advocates, these claims can at best only be judged premature. After all, as one computational researcher lamented, 'the com puter only does what I tell it to do, and not what I want it to do. ' In turbulence research, the initial speculation that computational meth ods would replace not only model-based computations but even experimen tal measurements, have not come close to fulfillment. It is becoming clear that computational methods and model development are equal partners in turbulence research: DNS and LES remain valuable tools for suggesting and validating models, while turbulence models continue to be the preferred tool for practical computations. We believed that a symposium which would reaffirm the practical and scientific importance of turbulence modeling was both necessary and timely.
Download or read book Transport Phenomena in Rotating Machinery written by J. H. Kim and published by CRC Press. This book was released on 1990 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completing the authoritative coverage begun in Dynamics of Rotating Machinery, this text offers 36 current chapters focusing on the areas of fluid flow, heat transfer, multiple flow, cavitation and design.
Download or read book Turbulent Shear Flows 4 written by L.J.S. Bradbury and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fourth International Symposium on Turbulent Shear Flows took place at Karlsruhe University in Germany. The papers presented at this Symposium encompassed a similar range to that of the previous meetings, with greater emphasis placed on experimental work, and continued a trend towards the examination of complex flows. Once again, three dimensional, recirculating and reacting flows featured strongly in the programme and were complemented by consideration of two-phase flows and discussions of both numerical and experimental techniques. The Symposium brought together some 300 participants from all over the world, and it was evident that there is a need for Turbulent Shear Flows Symposia, in order to obtain and communicate new information useful to researchers in the field of turbulent flows and of interest to engineers who design flow equipment. This volume contains 27 papers selected from more than 100 presentations at the Symposium which have been reviewed and edited before publication. Together they provide an indication of the status of current knowledge on the subjects represented at the Sympo sium. They are grouped into four sections, namely: • Fundamentals • Free Flows • Boundary Layers • Reacting Flows As in previous volumes in this series, each section begins with an introductory article con sidering the papers which follow in the broader context of available literature and current research.
Download or read book Turbulent Shear Flows 6 written by Jean-Claude Andre and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the inaugural symposium at the Pennsylvania State University in 1977, the venues for the series of biennial symposia on turbulent shear flows have alternated between the USA and Europe. For the Sixth Symposium, the first to be held in France, the city of Toulouse proved a natura] choice, being a centre for the aerospace industry, meteorological research and higher education. The meeting was hosted by the Paul Sabatier University on the southern perimeter of the city, and there nearly 300 workers in the field of turbulence converged to pronounce upon, debate and absorb the current issues in turbulent shear flows and to enjoy the unfailing September sunshine. The meeting had attracted more than 200 offers of papers from which just over 100 full papers and about 20 shorter communications in open forums could be accommodated. The present volume contains 28 of the original symposium presentations selected by the editors. Each contribution has been revised by its authors - sometimes quite extensively -in the light of the oral presentation. It is our hope that the selection provides a substantial statement of permanent interest on current research in the five areas covered by this book, i.e. fundamentals and closures, scalar transport and geophysical flows, aerodynamic flows, complex flows, and numerical simulations.
Download or read book Turbulent Shear Flows 8 written by Franz Durst and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a selection of the papers presented at the Eighth Symposium on Turbulent Shear Flows held at the Technical University of Munich, 9-11 September 1991. The first of these biennial international symposia was held at the Pennsylvania State Uni versity, USA, in 1977; subsequent symposia have been held at Imperial College, London, England; the University of California, Davis, USA; the University of Karlsruhe, Ger many; Cornell University, Ithaca, USA; the Paul Sabatier University, Toulouse, France; and Stanford University, California, USA. The purpose of this series of symposia is to provide a forum for the presentation and discussion of new developments in the field of turbulence, especially as related to shear flows of importance in engineering and geo physics. From the 330 extended abstracts submitted for this symposium, 145 papers were presented orally and 60 as posters. Out of these, we have selected twenty-four papers for inclusion in this volume, each of which has been revised and extended in accordance with the editors' recommendations. The following four theme areas were selected after consideration of the quality of the contributions, the importance of the area, and the selection made in earlier volumes: - wall flows, - separated flows, - compressibility effects, - buoyancy, rotation, and curvature effects. As in the past, each section corresponding to the above areas begins with an introduction by an authority in the field that places the individual contributions in context with one another and with related research.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt:
