Download or read book On Microchemical Modeling of Toughening Mechanismus and Failure in Amorphous Thermoplastic Polymer Blends written by Thomas Seelig and published by . This book was released on 2004 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book On Micromechanical Modeling of Toughening Mechanisms and Failure in Amorphous Thermoplastic Polymer Blends written by Thomas Seelig and published by . This book was released on 2004 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Composites from Renewable Materials Nanocomposites written by Vijay Kumar Thakur and published by John Wiley & Sons. This book was released on 2017-04-06 with total page 902 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique multidisciplinary 8-volume set focuses on the emerging issues concerning synthesis, characterization, design, manufacturing and various other aspects of composite materials from renewable materials and provides a shared platform for both researcher and industry. The Handbook of Composites from Renewable Materials comprises a set of 8 individual volumes that brings an interdisciplinary perspective to accomplish a more detailed understanding of the interplay between the synthesis, structure, characterization, processing, applications and performance of these advanced materials. The Handbook comprises 169 chapters from world renowned experts covering a multitude of natural polymers/ reinforcement/ fillers and biodegradable materials. Volume 7 is solely focused on the "Nanocomposites: Science and Fundamentals" of renewable materials. Some of the important topics include but not limited to: Preparation, characterization, and applications of nanomaterials from renewable resources; hydrogels and its nanocomposites from renewable resources: preparation of chitin-based nanocomposite materials through gelation with ionic liquid; starch-based bionanocomposites; biorenewable nanofiber and nanocrystal; investigation of wear characteristics of dental composite reinforced with rice husk-derived nanosilica filler particles; performance of regenerated cellulose/vermiculite nanocomposites fabricated via ionic liquid; preparation, structure, properties, and interactions of the PVA/cellulose composites; green composites with cellulose nanoreinforcements; biomass composites from bamboo-based micro/nanofibers; synthesis and medicinal properties of polycarbonates and resins from renewable sources; nanostructured polymer composites with modified carbon nanotubes; organic–inorganic nanocomposites derived from polysaccharides; natural polymer-based nanocomposites; cellulose whisker-based green polymer composites; poly (lactic acid) nanocomposites reinforced with different additives; nanocrystalline cellulose; halloysite-based bionanocomposites; nanostructurated composites based on biodegradable polymers and silver nanoparticles; starch-based biomaterials and nanocomposites; green nanocomposites based on PLA and natural organic fillers; and chitin and chitosan-based nanocomposites.
Download or read book Advances in Engineering Materials written by Bhupendra Prakash Sharma and published by Springer Nature. This book was released on 2021-04-16 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Future Learning Aspects of Mechanical Engineering (FLAME 2020). This book, in particular, focuses on characterizing materials using novel techniques. It covers a variety of advanced materials, viz. composites, coatings, nanomaterials, materials for fuel cells, biomaterials among others. The book also discusses advanced characterization techniques like X-ray photoelectron, UV spectroscopy, scanning electron, atomic power, transmission electron and laser confocal scanning fluorescence microscopy, and gel electrophoresis chromatography. This book gives the readers an insight into advanced material processes and characterizations with special emphasis on nanotechnology.
Download or read book Biomass and Bioenergy written by Khalid Rehman Hakeem and published by Springer. This book was released on 2014-08-25 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomass obtained from agricultural residues or forest can be used to produce different materials and bioenergy required in a modern society. As compared to other resources available, biomass is one of the most common and widespread resources in the world. Thus, biomass has the potential to provide a renewable energy source, both locally and across large areas of the world. It is estimated that the total investment in the biomass sector between 2008 and 2021 will reach the large sum of $104 billion. Presently bioenergy is the most important renewable energy option and will remain so the near and medium-term future. Previously several countries try to explore the utilization of biomass in bioenergy and composite sector. Biomass has the potential to become the world’s largest and most sustainable energy source and will be very much in demand. Bioenergy is based on resources that can be utilized on a sustainable basis all around the world and can thus serve as an effective option for the provision of energy services. In addition, the benefits accrued go beyond energy provision, creating unique opportunities for regional development. The present book will provide an up-to-date account of non-wood, forest residues, agricultural biomass (natural fibers), and energy crops together with processing, properties and its applications to ensure biomass utilization and reuse. All aspects of biomass and bioenergy and their properties and applications will be critically re-examined. The book consists of three sections, presenting Non wood and forest products from forestry, arboriculture activities or from wood processing, agricultural biomass (natural fibers) from agricultural harvesting or processing and finally energy crops: high yield crops and grasses grown especially for energy production.
Download or read book Bio Implant Interface written by J.E. Ellingsen and published by CRC Press. This book was released on 2003-04-29 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: Achieving good clinical outcomes with implanted biomaterials depends upon achieving optimal function, both mechanical and biological, which in turn depends upon integrating advances realized in biological science, material science, and tissue engineering. As these advances push back the frontiers of biomaterial medicine , the control and patterning
Download or read book THERMEC 2018 written by R. Shabadi and published by Trans Tech Publications Ltd. This book was released on 2018-12-26 with total page 2604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the THERMEC2018: 10th International Conference on Processing and Manufacturing of Advanced Materials, which took place between July 09 and July 13, 2018 in Paris, France, under the co-sponsorship of Universite de Lille, MINES ParisTech, PSL and Universite de Tours, France. The presented book will be useful for many researchers and engineers/technologists working in different aspects of processing and fabrication of materials, structure/property evaluation and applications of both ferrous and nonferrous materials including biomaterials, smart materials as well as the advanced measurement techniques in the materials science.
Download or read book Forensic Examination of Glass and Paint written by Brian Caddy and published by CRC Press. This book was released on 2001-08-23 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume represents an approach to the analysis of glass and paint as they occur as trace evidence in forensic cases. Each chapter is written by an expert in their particular area. The book is divided into two sections: one referring to paint and one referring to glass. Each section covers an introduction to the composition of these materials an
Download or read book Dental Materials Research written by George R. Dickson and published by . This book was released on 1972 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Mechanochemistry written by Roman Boulatov and published by Springer. This book was released on 2015-10-17 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Topics in Current Chemistry presents critical reviews of the present and future trends in modern chemical research. The scope of coverage is all areas of chemical science including the interfaces with related disciplines such as biology, medicine and materials science. The goal of each thematic volume is to give the non-specialist reader, whether in academia or industry, a comprehensive insight into an area where new research is emerging which is of interest to a larger scientific audience. Each review within the volume critically surveys one aspect of that topic and places it within the context of the volume as a whole. The most significant developments of the last 5 to 10 years are presented using selected examples to illustrate the principles discussed. The coverage is not intended to be an exhaustive summary of the field or include large quantities of data, but should rather be conceptual, concentrating on the methodological thinking that will allow the non-specialist reader to understand the information presented. Contributions also offer an outlook on potential future developments in the field. Review articles for the individual volumes are invited by the volume editors. Readership: research chemists at universities or in industry, graduate students.
Download or read book Measurement Assurance Programs written by Brian C. Belanger and published by . This book was released on 1984 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Noble and Precious Metals written by Mohindar Seehra and published by BoD – Books on Demand. This book was released on 2018-07-04 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of copper, silver, gold and platinum in jewelry as a measure of wealth is well known. This book contains 19 chapters written by international authors on other uses and applications of noble and precious metals (copper, silver, gold, platinum, palladium, iridium, osmium, rhodium, ruthenium, and rhenium). The topics covered include surface-enhanced Raman scattering, quantum dots, synthesis and properties of nanostructures, and its applications in the diverse fields such as high-tech engineering, nanotechnology, catalysis, and biomedical applications. The basis for these applications is their high-free electron concentrations combined with high-temperature stability and corrosion resistance and methods developed for synthesizing nanostructures. Recent developments in all these areas with up-to-date references are emphasized.
Download or read book Electrospinning written by Erich Kny and published by Royal Society of Chemistry. This book was released on 2018-08-08 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrospinning is a technique used to produce nanofibres from a polymer solution using an electrostatic force. The technology is now being used to create materials for a wide variety of uses from tissue engineering and 3D printing to packaging materials and electronic sensors. This new book focusses on the recent developments in their design, process parameters and polymers-selection to enable the commercial applications of electrospinning. The initial chapters introduce the technique and then specific chapters focus on the different application areas showing the various approaches for successful implementation of this fabrication process towards commercialization from basic research and development. The book will be suitable for graduate students, academics and industrial entrepreneurs in materials science, polymer science and chemical engineering as well as those interested in the energy and health applications of the materials.
Download or read book Local Mechanical Properties written by Petr Louda and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present collection of papers from 12th International Conference "Local Mechanical Properties" which was held on November 04.- 06.2015 in Liberec, Czech Republic presents current publications of conference participants from several countries .Besides the traditional research in area of mechanical properties of different metallic materials, composites, polymers was focused attention also on research of thin layers and nanomaterials. The significant potential of application of these new materials significantly affects on research activities of academia. Future application of innovative materials in different areas of human activities, already requires from researchers the definition of materials properties on atomic level. Conference by its content contributed to the deepening of knowledge about the internal structure of various materials, their mechanical and tribological properties. Mechanical Properties, Composites, Polymers, Steel, Alloys, Thin Layers, Thin Films, Coating, Nanomaterials, Nanoindentation, Testing, Measurements Materials Science.
Download or read book Particulate Composites written by Randall M. German and published by Springer. This book was released on 2016-06-14 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is focused on composites involving powders as the starting materials. It provides relevant information for questions related to the selection of constituent phases, most economic fabrication routes, proper testing procedures, and product optimization. The field is sufficiently advanced that predictive models guide many decisions. Applications are illustrated over a broad range of material and property combinations. This title includes: •Selection of phases with consideration of intersolubility & interface •Microstructure, especially the role of phase connectivity •Fabrication approaches, especially net-shape consolidation •Assessment of typical properties, testing techniques & industry standards •Design & trade-off decisions involved in optimization, including cost •Applications, both those that have matured and some emerging prospects. The reader may have little appreciation for how particulate composites are literally everywhere. Examples include new wear resistant consumer products(Apple watch), longer lasting automotive tires with reduced rolling resistance(Yokohama tires), and new diamond heat sinks for computers(Element Six substrates). Particulate composites also form critical components in applications such as magnets, dental fillings, brakes, darts, bio-implants, & cutting tools. Particulate composites are a multi-billion dollar industry, and can be a cost-effective solution ripe for innovation and continued rapid growth. For the engineer, the wide range of particulate composite formulation and property combinations offers the ability to design for a variety of application and provides ample opportunity for innovation. Particulate Composites: Fundamentals & Applications is ideal for use in a one-semester eng. course at the senior UG/graduate level, and is also suitable as a practical reference for materials scientists in academia and industry.
Download or read book Sustainable Composites for Lightweight Applications written by Hom Dhakal and published by Woodhead Publishing. This book was released on 2020-11-22 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon and glass fibre reinforced composite materials have been used for many years in several different types of applications. However, these conventional composites are derived from non-renewable reinforcements and they pose a significant threat to the environment. Government legislation and consumer behaviour have recently forced many industries to adapt sustainable composites. Industries such as automotive, marine and aerospace are now seeking sustainable lightweight composites with the aim to reduce the overall weight of the components with enhanced materials and design aspects. Therefore, there is high demand on research for the development of sustainable lightweight composites. This book presents a comprehensive review of lightweight composites with the central aim to increase their use in key industrial sectors such as automotive, marine and aerospace. There is no such book currently available that is dedicated to sustainable lightweight applications covering important topics such as key drivers for lightweight composites, mechanical properties, damage characterisation, durability and environmental aspects. Key topics that are addressed include: The roles of reinforcements and matrices in composite materials Sustainable natural fibre reinforcements and their morphological structures Lightweight applications and properties requirements Design, manufacturing processes and their effects on properties Testing and damage characterisation of composite materials Sustainable composites and techniques for property enhancement Future trends and challenges for sustainable composites in lightweight applications It will be a valuable reference resource for those working in material Science, polymer science, materials engineering, and industries involved in the manufacture of automotive and aerospace components from lightweight composite materials. Provides a comprehensive review of sustainable lightweight composites looking at key industrial applications such as automotive, marine, and aerospace and construction Important relationships between structure and properties are analysed in detail Enhancement of properties through hybrid systems, are also explored with emphasis on design, materials selection and manufacturing techniques
Download or read book Application of Fracture Mechanics to Composite Materials written by K. Friedrich and published by Elsevier. This book was released on 2012-12-02 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: This multiauthor volume provides a useful summary of current knowledge on the application of fracture mechanics to composite materials. It has been written to fill the gap between the literature on fundamental principles of fracture mechanics and the special publications on the fracture properties of conventional materials, such as metals, polymers and ceramics.The data are represented in the form of about 420 figures (including diagrams, schematics and photographs) and 80 tables. The author index covers more than 500 references, and the subject index more than 1000 key words.
