Download or read book On Chip Power Delivery and Management written by Inna P. Vaisband and published by Springer. This book was released on 2016-04-26 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes methods for distributing power in high speed, high complexity integrated circuits with power levels exceeding many tens of watts and power supplies below a volt. It provides a broad and cohesive treatment of power delivery and management systems and related design problems, including both circuit network models and design techniques for on-chip decoupling capacitors, providing insight and intuition into the behavior and design of on-chip power distribution systems. Organized into subareas to provide a more intuitive flow to the reader, this fourth edition adds more than a hundred pages of new content, including inductance models for interdigitated structures, design strategies for multi-layer power grids, advanced methods for efficient power grid design and analysis, and methodologies for simultaneously placing on-chip multiple power supplies and decoupling capacitors. The emphasis of this additional material is on managing the complexity of on-chip power distribution networks.
Download or read book Green Photonics and Electronics written by Gadi Eisenstein and published by Springer. This book was released on 2017-11-18 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: This books focuses on recent break-throughs in the development of a variety of photonic devices, serving distances ranging from mm to many km, together with their electronic counter-parts, e.g. the drivers for lasers, the amplifiers following the detectors and most important, the relevant advanced VLSI circuits. It explains that as a consequence of the increasing dominance of optical interconnects for high performance workstation clusters and supercomputers their complete design has to be revised. This book thus covers for the first time the whole variety of interdependent subjects contributing to green photonics and electronics, serving communication and energy harvesting. Alternative approaches to generate electric power using organic photovoltaic solar cells, inexpensive and again energy efficient in production are summarized. In 2015, the use of the internet consumed 5-6% of the raw electricity production in developed countries. Power consumption increases rapidly and without some transformational change will use, by the middle of the next decade at the latest, the entire electricity production. This apocalyptic outlook led to a redirection of the focus of data center and HPC developers from just increasing bit rates and capacities to energy efficiency. The high speed interconnects are all based on photonic devices. These must and can be energy efficient but they operate in an electronic environment and therefore have to be considered in a wide scope that also requires low energy electronic devices, sophisticated circuit designs and clever architectures. The development of the next generation of high performance exaFLOP computers suffers from the same problem: Their energy consumption based on present device generations is essentially prohibitive.
Download or read book Handbook of Power Management Circuits written by Haruo Kobayashi and published by CRC Press. This book was released on 2016-03-23 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book focuses on DC–DC switching power supply circuits, which are receiving attention as a key technology in green IT, especially in the automotive and consumer electronics industries. It covers buck converters, isolated converters, PFC converters, their modeling and analysis, several control methods, passive components, and their several recent applications (on-chip power supplies, DC–DC and AC–DC converter applications, single-inductor multi-output DC–DC converters, energy harvest applications, wireless power delivery, charge pump circuits, and power amplifiers). The contents are well balanced as the authors are from both academia and industry and include pioneers and inventors of hysteretic PWM control.
Download or read book VLSI SoC New Technology Enabler written by Carolina Metzler and published by Springer Nature. This book was released on 2020-07-22 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains extended and revised versions of the best papers presented at the 27th IFIP WG 10.5/IEEE International Conference on Very Large Scale Integration, VLSI-SoC 2019, held in Cusco, Peru, in October 2019. The 15 full papers included in this volume were carefully reviewed and selected from the 28 papers (out of 82 submissions) presented at the conference. The papers discuss the latest academic and industrial results and developments as well as future trends in the field of System-on-Chip (SoC) design, considering the challenges of nano-scale, state-of-the-art and emerging manufacturing technologies. In particular they address cutting-edge research fields like heterogeneous, neuromorphic and brain-inspired, biologically-inspired, approximate computing systems.
Download or read book Handbook of 3D Integration Volume 4 written by Paul D. Franzon and published by John Wiley & Sons. This book was released on 2019-01-25 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fourth volume of the landmark handbook focuses on the design, testing, and thermal management of 3D-integrated circuits, both from a technological and materials science perspective. Edited and authored by key contributors from top research institutions and high-tech companies, the first part of the book provides an overview of the latest developments in 3D chip design, including challenges and opportunities. The second part focuses on the test methods used to assess the quality and reliability of the 3D-integrated circuits, while the third and final part deals with thermal management and advanced cooling technologies and their integration. This fourth volume of the landmark handbook focuses on the design, testing, and thermal management of 3D-integrated circuits, both from a technological and materials science perspective. Edited and authored by key contributors from top research institutions and high-tech companies, the first part of the book provides an overview of the latest developments in 3D chip design, including challenges and opportunities. The second part focuses on the test methods used to assess the quality and reliability of the 3D-integrated circuits, while the third and final part deals with thermal management and advanced cooling technologies and their integration.
Download or read book CMOS High Efficiency On chip Power Management written by John Hu and published by Springer Science & Business Media. This book was released on 2011-09-03 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will introduce various power management integrated circuits (IC) design techniques to build future energy-efficient “green” electronics. The goal is to achieve high efficiency, which is essential to meet consumers’ growing need for longer battery lives. The focus is to study topologies amiable for full on-chip implementation (few external components) in the mainstream CMOS technology, which will reduce the physical size and the manufacturing cost of the devices.
Download or read book Power Integrity Modeling and Design for Semiconductors and Systems written by Madhavan Swaminathan and published by Pearson Education. This book was released on 2007-11-19 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: The First Comprehensive, Example-Rich Guide to Power Integrity Modeling Professionals such as signal integrity engineers, package designers, and system architects need to thoroughly understand signal and power integrity issues in order to successfully design packages and boards for high speed systems. Now, for the first time, there's a complete guide to power integrity modeling: everything you need to know, from the basics through the state of the art. Using realistic case studies and downloadable software examples, two leading experts demonstrate today's best techniques for designing and modeling interconnects to efficiently distribute power and minimize noise. The authors carefully introduce the core concepts of power distribution design, systematically present and compare leading techniques for modeling noise, and link these techniques to specific applications. Their many examples range from the simplest (using analytical equations to compute power supply noise) through complex system-level applications. The authors Introduce power delivery network components, analysis, high-frequency measurement, and modeling requirements Thoroughly explain modeling of power/ground planes, including plane behavior, lumped modeling, distributed circuit-based approaches, and much more Offer in-depth coverage of simultaneous switching noise, including modeling for return currents using time- and frequency-domain analysis Introduce several leading time-domain simulation methods, such as macromodeling, and discuss their advantages and disadvantages Present the application of the modeling methods on several advanced case studies that include high-speed servers, high-speed differential signaling, chip package analysis, materials characterization, embedded decoupling capacitors, and electromagnetic bandgap structures This book's system-level focus and practical examples will make it indispensable for every student and professional concerned with power integrity, including electrical engineers, system designers, signal integrity engineers, and materials scientists. It will also be valuable to developers building software that helps to analyze high-speed systems.
Download or read book Advances In 3d Integrated Circuits And Systems written by Yu Hao and published by World Scientific. This book was released on 2015-08-28 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D integration is an emerging technology for the design of many-core microprocessors and memory integration. This book, Advances in 3D Integrated Circuits and Systems, is written to help readers understand 3D integrated circuits in three stages: device basics, system level management, and real designs.Contents presented in this book include fabrication techniques for 3D TSV and 2.5D TSI; device modeling; physical designs; thermal, power and I/O management; and 3D designs of sensors, I/Os, multi-core processors, and memory.Advanced undergraduates, graduate students, researchers and engineers may find this text useful for understanding the many challenges faced in the development and building of 3D integrated circuits and systems.
Download or read book Heat Management in Integrated Circuits written by Seda Ogrenci-Memik and published by IET. This book was released on 2015-12 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Management in Integrated Circuits focuses on devices and materials that are intimately integrated on-chip (as opposed to in package or on-board) for the purposes of thermal monitoring and thermal management, i.e., cooling. The devices and circuits cover various designs used for the purpose of converting temperature to a digital measurement, heat to electricity, and actively biased circuits that reverse thermal gradients on chips for the purpose of cooling. The book includes fundamental operating principles that touch upon physics of materials that are used to construct sensing, harvesting, and cooling devices, which will be followed by circuit and system design aspects that enable successful functioning of these devices as an on-chip system. Finally, the author discusses the use of these devices and systems for thermal management and the role they play in enabling energy-efficient and sustainable high performance computing systems.
Download or read book Power Integrity for Nanoscale Integrated Systems written by Masanori Hashimoto and published by McGraw Hill Professional. This book was released on 2014-03-07 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proven methods for noise-tolerant nanoscale integrated circuit design This leading-edge guide discusses the impact of power integrity from a design perspective, emphasizing phenomena and problems induced by power integrity degradation and the latest design trends, including low-power design. Power Integrity for Nanoscale Integrated Systems describes how these problems can be forecast early in the design process and the countermeasures that can be used to address them, such as the inclusion of inductance and accurate modeling for PI analysis, as well as robust circuit design. Detailed examples and a case study on the IBM POWER7+ processor illustrate real-world applications of the techniques presented in this practical resource. Coverage includes: Significance of power integrity for integrated circuits Supply and substrate noise impact on circuits Clock generation and distribution with power integrity Signal and power integrity design for I/O circuits Power integrity degradation and modeling Lumped, distributed, and 3D modeling for power integrity Chip temperature and PI impact Low-power techniques and PI impact Power integrity case study using the IBM POWER7+ processor chip Carbon nanotube interconnects for power delivery
Download or read book Power Management Integrated Circuits written by Mona M. Hella and published by CRC Press. This book was released on 2017-12-19 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Management Integrated Circuits and Technologies delivers a modern treatise on mixed-signal integrated circuit design for power management. Comprised of chapters authored by leading researchers from industry and academia, this definitive text: Describes circuit- and architectural-level innovations that meet advanced power and speed capabilities Explores hybrid inductive-capacitive converters for wide-range dynamic voltage scaling Presents innovative control techniques for single inductor dual output (SIDO) and single inductor multiple output (SIMO) converters Discusses cutting-edge design techniques including switching converters for analog/RF loads Compares the use of GaAs pHEMTs to CMOS devices for efficient high-frequency switching converters Thus, Power Management Integrated Circuits and Technologies provides comprehensive, state-of-the-art coverage of this exciting and emerging field of engineering.
Download or read book Power Management Techniques for Integrated Circuit Design written by Ke-Horng Chen and published by John Wiley & Sons. This book was released on 2016-05-10 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book begins with the premise that energy demands are directing scientists towards ever-greener methods of power management, so highly integrated power control ICs (integrated chip/circuit) are increasingly in demand for further reducing power consumption. A timely and comprehensive reference guide for IC designers dealing with the increasingly widespread demand for integrated low power management Includes new topics such as LED lighting, fast transient response, DVS-tracking and design with advanced technology nodes Leading author (Chen) is an active and renowned contributor to the power management IC design field, and has extensive industry experience Accompanying website includes presentation files with book illustrations, lecture notes, simulation circuits, solution manuals, instructors’ manuals, and program downloads
Download or read book Design of Power Management Integrated Circuits written by Bernhard Wicht and published by John Wiley & Sons. This book was released on 2024-05-14 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of Power Management Integrated Circuits Comprehensive resource on power management ICs affording new levels of functionality and applications with cost reduction in various fields Design of Power Management Integrated Circuits is a comprehensive reference for power management IC design, covering the circuit design of main power management circuits like linear and switched-mode voltage regulators, along with sub-circuits such as power switches, gate drivers and their supply, level shifters, the error amplifier, current sensing, and control loop design. Circuits for protection and diagnostics, as well as aspects of the physical design like lateral and vertical power delivery, pin-out, floor planning, grounding/supply guidelines, and packaging, are also addressed. A full chapter is dedicated to the design of integrated passives. The text illustrates the application of power management integrated circuits (PMIC) to growth areas like computing, the Internet of Things, mobility, and renewable energy. Includes numerous real-world examples, case studies, and exercises illustrating key design concepts and techniques. Offering a unique insight into this rapidly evolving technology through the author’s experience developing PMICs in both the industrial and academic environment, Design of Power Management Integrated Circuits includes information on: Capacitive, inductive and hybrid DC-DC converters and their essential circuit blocks, covering error amplifiers, comparators, and ramp generators Sensing, protection, and diagnostics, covering thermal protection, inductive loads and clamping structures, under-voltage, reference and power-on reset generation Integrated MOS, MOM and MIM capacitors, integrated inductors Control loop design and PWM generation ensuring stability and fast transient response; subharmonic oscillations in current mode control (analysis and circuit design for slope compensation) DC behavior and DC-related circuit design, covering power efficiency, line and load regulation, error amplifier, dropout, and power transistor sizing Commonly used level shifters (including sizing rules) and cascaded (tapered) driver sizing and optimization guidelines Optimizing the physical design considering packaging, floor planning, EMI, pinout, PCB design and thermal design Design of Power Management Integrated Circuits is an essential resource on the subject for circuit designers/IC designers, system engineers, and application engineers, along with advanced undergraduate students and graduate students in related programs of study.
Download or read book VLSI Design and Test written by Anirban Sengupta and published by Springer. This book was released on 2019-08-17 with total page 775 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 23st International Symposium on VLSI Design and Test, VDAT 2019, held in Indore, India, in July 2019. The 63 full papers were carefully reviewed and selected from 199 submissions. The papers are organized in topical sections named: analog and mixed signal design; computing architecture and security; hardware design and optimization; low power VLSI and memory design; device modelling; and hardware implementation.
Download or read book Graphs in VLSI written by Rassul Bairamkulov and published by Springer Nature. This book was released on 2022-11-28 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Networks are pervasive. Very large scale integrated (VLSI) systems are no different, consisting of dozens of interconnected subsystems, hundreds of modules, and many billions of transistors and wires. Graph theory is crucial for managing and analyzing these systems. In this book, VLSI system design is discussed from the perspective of graph theory. Starting from theoretical foundations, the authors uncover the link connecting pure mathematics with practical product development. This book not only provides a review of established graph theoretic practices, but also discusses the latest advancements in graph theory driving modern VLSI technologies, covering a wide range of design issues such as synchronization, power network models and analysis, and interconnect routing and synthesis. Provides a practical introduction to graph theory in the context of VLSI systems engineering; Reviews comprehensively graph theoretic methods and algorithms commonly used during VLSI product development process; Includes a review of novel graph theoretic methods and algorithms for VLSI system design.
Download or read book System on Chip written by Bashir M. Al-Hashimi and published by IET. This book was released on 2006-01-31 with total page 940 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights both the key achievements of electronic systems design targeting SoC implementation style, and the future challenges presented by the continuing scaling of CMOS technology.
Download or read book Design And Modeling For 3d Ics And Interposers written by Swaminathan Madhavan and published by World Scientific. This book was released on 2013-11-05 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Integration is being touted as the next semiconductor revolution. This book provides a comprehensive coverage on the design and modeling aspects of 3D integration, in particularly, focus on its electrical behavior. Looking from the perspective the Silicon Via (TSV) and Glass Via (TGV) technology, the book introduces 3DICs and Interposers as a technology, and presents its application in numerical modeling, signal integrity, power integrity and thermal integrity. The authors underscored the potential of this technology in design exchange formats and power distribution.
