Download or read book On Broadband Matching of Multiport Electrical Networks with Applications written by Wai-Kai Chen and published by . This book was released on 1988 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of the research is to solve several problems of fundamental importance in the design of broadband matching networks and multiplexers. More specifically, we investigate the following: (1) Obtain a set of coefficient constraints that are necessary and sufficient for a real rational matrix to be the scattering matrix of a passive n-port network normalizing to the n prescribed non-foster positive-real impedances. (2) Derive a set of coefficient constraints that are necessary and sufficient for the existence of a lossless reciprocal n-port network, which, when terminated in the n given frequency-dependent loads, realizes the prescribed transducer power-gain characteristics among its ports. Study the relationships between the broadband matching of many ports and the design theory of multiplexers and apply the known results in the theory of broadband matching to minimize the interaction effects of the individual channels.
Download or read book Theory and Design of Broadband Matching Networks written by Wai-Kai Chen and published by Elsevier. This book was released on 2013-10-22 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory and Design of Broadband Matching Networks centers on the network theory and its applications to the design of broadband matching networks and amplifiers. Organized into five chapters, this book begins with a description of the foundation of network theory. Chapter 2 gives a fairly complete exposition of the scattering matrix associated with an n-port network. Chapter 3 considers the approximation problem along with a discussion of the approximating functions. Chapter 4 explains the Youla's theory of broadband matching by illustrating every phase of the theory with fully worked out examples. The extension of Youla's theory to active load impedance is taken up in Chapter 5. This book will be useful as a reference for practicing engineers who wish to learn how the modern network theory can be applied to the design of many practical circuits.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1988 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Broadband Matching Theory And Implementations 3rd Edition written by Wai-kai Chen and published by World Scientific. This book was released on 2015-10-13 with total page 879 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition presents a unified, up-to-date and detailed account of broadband matching theory and its applications to the design of broadband matching networks and amplifiers. A special feature is the addition of results that are of direct practical value. They are design curves, tables and explicit formulas for designing networks having Butterworth, Chebyshev or elliptic, Bessel or maximally flat group-delay response. These results are extremely useful as the design procedures can be reduced to simple arithmetic. Two case studies towards the end of the book are intended to demonstrate the applications to the practical design of modern filter circuits.
Download or read book Multiport Broadband Matching and Its Application in the Design of Feed Networks for Array Antennas written by Clifford Richard Curry and published by . This book was released on 1997 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Broadband Matching written by Wai-Kai Chen and published by World Scientific. This book was released on 2015-10-13 with total page 879 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The third edition presents a unified, up-to-date and detailed account of broadband matching theory and its applications to the design of broadband matching networks and amplifiers. A special feature is the addition of results that are of direct practical value. They are design curves, tables and explicit formulas for designing networks having Butterworth, Chebyshev or elliptic, Bessel or maximally flat group-delay response. These results are extremely useful as the design procedures can be reduced to simple arithmetic. Two case studies towards the end of the book are intended to demonstrate the applications to the practical design of modern filter circuits."--
Download or read book Broadband Matching written by Wai-Kai Chen and published by World Scientific Publishing Company Incorporated. This book was released on 1988 with total page 723 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition presents a unified, up-to-date and detailed account of broadband matching theory and its applications to the design of broadband matching networks and amplifiers. A special feature is the addition of results that are of direct practical value. They are design curves, tables and explicit formulas for designing networks having Butterworth, Chebyshev or elliptic response. These results are extremely useful as the design procedures can be reduced to simple arithmetic.
Download or read book Technical Reports Awareness Circular TRAC written by and published by . This book was released on 1988-08 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theory of Power Matching written by János Ladvánszky and published by Springer. This book was released on 2019-05-13 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the development of the power matching problem. It starts with the derivative-free proof of conjugate matching, goes through the nonlinear, resistive maximum power theorem and its reversal, extension of the concept of equivalence in the case of nonlinear circuits, application of the nonlinear, and resistive maximum power theorem for diode measurement. The author treats practically important special cases of nonlinear, dynamic power matching with applications, and the most general solution that is not realizable.
Download or read book The Theory and Design of Broadband Matching Networks written by Wai-Kai Chen and published by Pergamon. This book was released on 1976 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of RF and Microwave Techniques and Technologies written by Hans L. Hartnagel and published by Springer Nature. This book was released on 2023-07-28 with total page 1554 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increase of consumer, medical and sensors electronics using radio frequency (RF) and microwave (MW) circuits has implications on overall performances if design is not robust and optimized for a given applications. The current and later generation communication systems and Internet of Thing (IoT) demand for robust electronic circuits with optimized performance and functionality, but low cost, size, and power consumption. As a result, there is a need for a textbook that provides a comprehensive treatment of the subject. This book provides state-of-the-art coverage of RF and Microwave Techniques and Technologies, covers important topics: transmission-line theory, passive and semiconductor devices, active and passive microwave circuits and receiver systems, as well as antennas, noise and digital signal modulation schemes. With an emphasis on theory, design, and applications, this book is targeted to students, teachers, scientists, and practicing design engineers who are interested in broadening their knowledge of RF and microwave electronic circuit design. Readers will also benefit from a unique integration of theory and practice, provides the readers a solid understanding of the RF and microwave concepts, active and passive components, antenna, and modulation schemes. Readers will learn to solve common design problems ranging from selection of components, matching networks to biasing and stability, and digital modulation techniques. More importantly, it provides basic understanding in the analysis and design of RF and microwave circuits in a manner that is practiced in industry. This make sure that the know-how learned in this book can be effortlessly and straightway put into practice without any obstacles.
Download or read book Broadband Matching Theory and Implementations written by Wai-Kai Chen and published by World Scientific. This book was released on 1993 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: The solutions to problems in the text Broadband Matching: Theory and Implementations are presented in this book. It contains detailed solutions to most problems in the text except some proofs of identities and theorems and the verification of solutions. Many of the design problems are given in numerical details for the benefit of those who wish to perform the design themselves.
Download or read book Matching Networks for Broadband Multiport Radio frequency Systems written by Ding Nie and published by . This book was released on 2016 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Government Reports Annual Index written by and published by . This book was released on 1988 with total page 1428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sections 1-2. Keyword Index.--Section 3. Personal author index.--Section 4. Corporate author index.-- Section 5. Contract/grant number index, NTIS order/report number index 1-E.--Section 6. NTIS order/report number index F-Z.
Download or read book Proceedings written by and published by . This book was released on 1985 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mathematical Reviews written by and published by . This book was released on 1987 with total page 1198 pages. Available in PDF, EPUB and Kindle. Book excerpt: