Download or read book GaN based Materials and Devices written by Michael Shur and published by World Scientific. This book was released on 2004 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: The unique materials properties of GaN-based semiconductors havestimulated a great deal of interest in research and developmentregarding nitride materials growth and optoelectronic andnitride-based electronic devices. High electron mobility andsaturation velocity, high sheet carrier concentration atheterojunction interfaces, high breakdown field, and low thermalimpedance of GaN-based films grown over SiC or bulk AlN substratesmake nitride-based electronic devices very promising.

Download or read book Gallium Oxide written by Stephen Pearton and published by Elsevier. This book was released on 2018-10-15 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gallium Oxide: Technology, Devices and Applications discusses the wide bandgap semiconductor and its promising applications in power electronics, solar blind UV detectors, and in extreme environment electronics. It also covers the fundamental science of gallium oxide, providing an in-depth look at the most relevant properties of this materials system. High quality bulk Ga2O3 is now commercially available from several sources and n-type epi structures are also coming onto the market. As researchers are focused on creating new complex structures, the book addresses the latest processing and synthesis methods. Chapters are designed to give readers a complete picture of the Ga2O3 field and the area of devices based on Ga2O3, from their theoretical simulation, to fabrication and application. - Provides an overview of the advantages of the gallium oxide materials system, the advances in in bulk and epitaxial crystal growth, device design and processing - Reviews the most relevant applications, including photodetectors, FETs, FINFETs, MOSFETs, sensors, catalytic applications, and more - Addresses materials properties, including structural, mechanical, electrical, optical, surface and contact

Download or read book GaN and Related Materials written by Stephen J. Pearton and published by CRC Press. This book was released on 2021-10-08 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents views on current developments in heat and mass transfer research related to the modern development of heat exchangers. Devotes special attention to the different modes of heat and mass transfer mechanisms in relation to the new development of heat exchangers design. Dedicates particular attention to the future needs and demands for further development in heat and mass transfer. GaN and related materials are attracting tremendous interest for their applications to high-density optical data storage, blue/green diode lasers and LEDs, high-temperature electronics for high-power microwave applications, electronics for aerospace and automobiles, and stable passivation films for semiconductors. In addition, there is great scientific interest in the nitrides, because they appear to form the first semiconductor system in which extended defects do not severely affect the optical properties of devices. This series provides a forum for the latest research in this rapidly-changing field, offering readers a basic understanding of new developments in recent research. Series volumes feature a balance between original theoretical and experimental research in basic physics, device physics, novel materials and quantum structures, processing, and systems.

Download or read book Metal Semiconductor Contacts and Devices written by Simon S. Cohen and published by Academic Press. This book was released on 2014-12-01 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: VLSI Electronics Microstructure Science, Volume 13: Metal-Semiconductor Contacts and Devices presents the physics, technology, and applications of metal-semiconductor barriers in digital integrated circuits. The emphasis is placed on the interplay among the theory, processing, and characterization techniques in the development of practical metal-semiconductor contacts and devices. This volume contains chapters that are devoted to the discussion of the physics of metal-semiconductor interfaces and its basic phenomena; fabrication procedures; and interface characterization techniques, particularly, ohmic contacts. Contacts that involve polycrystalline silicon; applications of the metal-semiconductor barriers in MOS, bipolar, and MESFET digital integrated circuits; and methods for measuring the barrier height are covered as well. Process engineers, device physicists, circuit designers, and students of this discipline will find the book very useful.

Download or read book Handbook of Refractory Carbides and Nitrides written by Hugh O. Pierson and published by William Andrew. This book was released on 1996-12-31 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of this book is to: (1) provide a complete review of the structures and properties of refractory carbides and nitrides; (2) provide a thorough assessment of the technology, processing, and equipment and systems used in production and R&D, with emphasis on advanced designs; and (3) identify and describe the applications, particularly new and emerging areas.

Download or read book Ohmic Contacts to Semiconductors written by Electrochemical Society and published by . This book was released on 1969 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Physics of Semiconductor Devices written by R. K. Sharma and published by Springer. This book was released on 2019-01-31 with total page 1260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book disseminates the current knowledge of semiconductor physics and its applications across the scientific community. It is based on a biennial workshop that provides the participating research groups with a stimulating platform for interaction and collaboration with colleagues from the same scientific community. The book discusses the latest developments in the field of III-nitrides; materials & devices, compound semiconductors, VLSI technology, optoelectronics, sensors, photovoltaics, crystal growth, epitaxy and characterization, graphene and other 2D materials and organic semiconductors.

Download or read book GaN Transistors for Efficient Power Conversion written by Alex Lidow and published by John Wiley & Sons. This book was released on 2019-08-12 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: An up-to-date, practical guide on upgrading from silicon to GaN, and how to use GaN transistors in power conversion systems design This updated, third edition of a popular book on GaN transistors for efficient power conversion has been substantially expanded to keep students and practicing power conversion engineers ahead of the learning curve in GaN technology advancements. Acknowledging that GaN transistors are not one-to-one replacements for the current MOSFET technology, this book serves as a practical guide for understanding basic GaN transistor construction, characteristics, and applications. Included are discussions on the fundamental physics of these power semiconductors, layout, and other circuit design considerations, as well as specific application examples demonstrating design techniques when employing GaN devices. GaN Transistors for Efficient Power Conversion, 3rd Edition brings key updates to the chapters of Driving GaN Transistors; Modeling, Simulation, and Measurement of GaN Transistors; DC-DC Power Conversion; Envelope Tracking; and Highly Resonant Wireless Energy Transfer. It also offers new chapters on Thermal Management, Multilevel Converters, and Lidar, and revises many others throughout. Written by leaders in the power semiconductor field and industry pioneers in GaN power transistor technology and applications Updated with 35% new material, including three new chapters on Thermal Management, Multilevel Converters, Wireless Power, and Lidar Features practical guidance on formulating specific circuit designs when constructing power conversion systems using GaN transistors A valuable resource for professional engineers, systems designers, and electrical engineering students who need to fully understand the state-of-the-art GaN Transistors for Efficient Power Conversion, 3rd Edition is an essential learning tool and reference guide that enables power conversion engineers to design energy-efficient, smaller, and more cost-effective products using GaN transistors.

Download or read book Nitride Semiconductors written by Pierre Ruterana and published by John Wiley & Sons. This book was released on 2006-05-12 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor components based on silicon have been used in a wide range of applications for some time now. These elemental semiconductors are now well researched and technologically well developed. In the meantime the focus has switched to a new group of materials: ceramic semiconductors based on nitrides are currently the subject of research due to their optical and electronic characteristics. They open up new industrial possibilities in the field of photosensors, as light sources or as electronic components. This collection of review articles provides a systematic and in-depth overview of the topic, on both a high and current level. It offers information on the physical basics as well as the latest results in a compact yet comprehensive manner. The contributions cover the physical processes involved in manufacture, from semiconductor growth, via their atomic structures and the related characteristics right up to future industrial applications. A highly pertinent book for anyone working in applied materials research or the semiconductor industry.

Download or read book Oxide and Nitride Semiconductors written by Takafumi Yao and published by Springer Science & Business Media. This book was released on 2009-03-20 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a unique book devoted to the important class of both oxide and nitride semiconductors. It covers processing, properties and applications of ZnO and GaN. The aim of this book is to provide the fundamental and technological issues for both ZnO and GaN.

Download or read book Power GaN Devices written by Matteo Meneghini and published by Springer. This book was released on 2016-09-08 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the first comprehensive overview of the properties and fabrication methods of GaN-based power transistors, with contributions from the most active research groups in the field. It describes how gallium nitride has emerged as an excellent material for the fabrication of power transistors; thanks to the high energy gap, high breakdown field, and saturation velocity of GaN, these devices can reach breakdown voltages beyond the kV range, and very high switching frequencies, thus being suitable for application in power conversion systems. Based on GaN, switching-mode power converters with efficiency in excess of 99 % have been already demonstrated, thus clearing the way for massive adoption of GaN transistors in the power conversion market. This is expected to have important advantages at both the environmental and economic level, since power conversion losses account for 10 % of global electricity consumption. The first part of the book describes the properties and advantages of gallium nitride compared to conventional semiconductor materials. The second part of the book describes the techniques used for device fabrication, and the methods for GaN-on-Silicon mass production. Specific attention is paid to the three most advanced device structures: lateral transistors, vertical power devices, and nanowire-based HEMTs. Other relevant topics covered by the book are the strategies for normally-off operation, and the problems related to device reliability. The last chapter reviews the switching characteristics of GaN HEMTs based on a systems level approach. This book is a unique reference for people working in the materials, device and power electronics fields; it provides interdisciplinary information on material growth, device fabrication, reliability issues and circuit-level switching investigation.

Download or read book III Nitride Based Light Emitting Diodes and Applications written by Tae-Yeon Seong and published by Springer Science & Business Media. This book was released on 2014-07-08 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Light emitting diodes (LEDs) are already used in traffic signals, signage lighting, and automotive applications. However, its ultimate goal is to replace traditional illumination through LED lamps since LED lighting significantly reduces energy consumption and cuts down on carbon-dioxide emission. Despite dramatic advances in LED technologies (e.g., growth, doping and processing technologies), however, there remain critical issues for further improvements yet to be achieved for the realization of solid-state lighting. This book aims to provide the readers with some contemporary LED issues, which have not been comprehensively discussed in the published books and, on which the performance of LEDs is seriously dependent. For example, most importantly, there must be a breakthrough in the growth of high-quality nitride semiconductor epitaxial layers with a low density of dislocations, in particular, in the growth of Al-rich and and In-rich GaN-based semiconductors. The materials quality is directly dependent on the substrates used, such as sapphire, Si, etc. In addition, efficiency droop, growth on different orientations and polarization are also important. Chip processing and packaging technologies are key issues. This book presents a comprehensive review of contemporary LED issues. Given the interest and importance of future research in nitride semiconducting materials and solid state lighting applications, the contents are very timely. The book is composed of chapters written by leading researchers in III-nitride semiconducting materials and device technology. This book will be of interest to scientists and engineers working on LEDs for lighting applications. Postgraduate researchers working on LEDs will also benefit from the issues this book provides.

Download or read book Gallium Nitride Electronics written by Rüdiger Quay and published by Springer Science & Business Media. This book was released on 2008-04-05 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on nearly a decade of materials and electronics research at the leading research institution on the nitride topic in Europe. It is a comprehensive monograph and tutorial that will be of interest to graduate students of electrical engineering, communication engineering, and physics; to materials, device, and circuit engineers in research and industry; to all scientists with a general interest in advanced electronics.

Download or read book Handbook of Nitride Semiconductors and Devices Electronic and Optical Processes in Nitrides written by Hadis Morkoç and published by John Wiley & Sons. This book was released on 2009-07-30 with total page 883 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three volumes of this handbook treat the fundamentals, technology and nanotechnology of nitride semiconductors with an extraordinary clarity and depth. They present all the necessary basics of semiconductor and device physics and engineering together with an extensive reference section. Volume 2 addresses the electrical and optical properties of nitride materials. It includes semiconductor metal contacts, impurity and carrier concentrations, and carrier transport in semiconductors.

Download or read book Semiconductor Material and Device Characterization written by Dieter K. Schroder and published by John Wiley & Sons. This book was released on 2015-06-29 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Third Edition updates a landmark text with the latest findings The Third Edition of the internationally lauded Semiconductor Material and Device Characterization brings the text fully up-to-date with the latest developments in the field and includes new pedagogical tools to assist readers. Not only does the Third Edition set forth all the latest measurement techniques, but it also examines new interpretations and new applications of existing techniques. Semiconductor Material and Device Characterization remains the sole text dedicated to characterization techniques for measuring semiconductor materials and devices. Coverage includes the full range of electrical and optical characterization methods, including the more specialized chemical and physical techniques. Readers familiar with the previous two editions will discover a thoroughly revised and updated Third Edition, including: Updated and revised figures and examples reflecting the most current data and information 260 new references offering access to the latest research and discussions in specialized topics New problems and review questions at the end of each chapter to test readers' understanding of the material In addition, readers will find fully updated and revised sections in each chapter. Plus, two new chapters have been added: Charge-Based and Probe Characterization introduces charge-based measurement and Kelvin probes. This chapter also examines probe-based measurements, including scanning capacitance, scanning Kelvin force, scanning spreading resistance, and ballistic electron emission microscopy. Reliability and Failure Analysis examines failure times and distribution functions, and discusses electromigration, hot carriers, gate oxide integrity, negative bias temperature instability, stress-induced leakage current, and electrostatic discharge. Written by an internationally recognized authority in the field, Semiconductor Material and Device Characterization remains essential reading for graduate students as well as for professionals working in the field of semiconductor devices and materials. An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department.

Download or read book Handbook for III V High Electron Mobility Transistor Technologies written by D. Nirmal and published by CRC Press. This book was released on 2019-05-14 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focusses on III-V high electron mobility transistors (HEMTs) including basic physics, material used, fabrications details, modeling, simulation, and other important aspects. It initiates by describing principle of operation, material systems and material technologies followed by description of the structure, I-V characteristics, modeling of DC and RF parameters of AlGaN/GaN HEMTs. The book also provides information about source/drain engineering, gate engineering and channel engineering techniques used to improve the DC-RF and breakdown performance of HEMTs. Finally, the book also highlights the importance of metal oxide semiconductor high electron mobility transistors (MOS-HEMT). Key Features Combines III-As/P/N HEMTs with reliability and current status in single volume Includes AC/DC modelling and (sub)millimeter wave devices with reliability analysis Covers all theoretical and experimental aspects of HEMTs Discusses AlGaN/GaN transistors Presents DC, RF and breakdown characteristics of HEMTs on various material systems using graphs and plots

Download or read book Advancing Silicon Carbide Electronics Technology I written by Konstantinos Zekentes and published by Materials Research Forum LLC. This book was released on 2018-09-25 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapidly advancing Silicon Carbide technology has a great potential in high temperature and high frequency electronics. High thermal stability and outstanding chemical inertness make SiC an excellent material for high-power, low-loss semiconductor devices. The present volume presents the state of the art of SiC device fabrication and characterization. Topics covered include: SiC surface cleaning and etching techniques; electrical characterization methods and processing of ohmic contacts to silicon carbide; analysis of contact resistivity dependence on material properties; limitations and accuracy of contact resistivity measurements; ohmic contact fabrication and test structure design; overview of different metallization schemes and processing technologies; thermal stability of ohmic contacts to SiC, their protection and compatibility with device processing; Schottky contacts to SiC; Schottky barrier formation; Schottky barrier inhomogeneity in SiC materials; technology and design of 4H-SiC Schottky and Junction Barrier Schottky diodes; Si/SiC heterojunction diodes; applications of SiC Schottky diodes in power electronics and temperature/light sensors; high power SiC unipolar and bipolar switching devices; different types of SiC devices including material and technology constraints on device performance; applications in the area of metal contacts to silicon carbide; status and prospects of SiC power devices.