Download or read book Basic Offshore Safety written by Abdul Khalique and published by Routledge. This book was released on 2015-10-05 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive insight into the offshore oil and gas industry for those intending to choose it as a career Full syllabus coverage for OPITO BOSIET, FOET, MIST and IMIST courses Produced in full colour with over 180 images Basic Offshore Safety covers everything that newcomers to the offshore oil and gas industry need to know prior to travelling offshore or when attending OPITO's Basic Offshore Safety Induction and Emergency Training (BOSIET), Minimum Industry Safety Training (MIST), Further Offshore Emergency Training (FOET) and International MIST courses. Primarily focused on the oil industry, this book introduces readers to the key safety topics in the offshore support vessel industry and common to the renewable industry. Written in easy to follow steps and including references to both the legislation and guidance where relevant, Abdul Khalique walks the reader through the hazards they are likely to encounter when travelling to, from or working offshore, showing how to minimise risks and deal with any issues that may arise at any stage of the work.
Download or read book Offshore Safety Management written by Ian Sutton and published by William Andrew. This book was released on 2011-10-11 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2010 was a defining year for the offshore oil and gas industry in the United States. On April 20, 2010, the Deepwater Horizon (DWH) floating drilling rig suffered a catastrophic explosion and fire. Eleven men died in the explosion — 17 others were injured. The fire, which burned for a day and a half, eventually sent the entire rig to the bottom of the sea. The extent of the spill was enormous, and the environmental damage is still being evaluated. Following DWH the Bureau of Ocean Energy Management, Regulations and Enforcement (BOEMRE) issued many new regulations. One of them is the Safety and Environmental System (SEMS) rule, which is based on the American Petroleum Institute’s SEMP recommended practice. Companies have to be in full compliance with its extensive requirements by November 15, 2011.
Download or read book Offshore Well Completion and Stimulation written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-05-08 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: While the public is generally aware of the use of hydraulic fracturing for unconventional resource development onshore, it is less familiar with the well completion and stimulation technologies used in offshore operations, including hydraulic fracturing, gravel packs, "fracpacks," and acid stimulation. Just as onshore technologies have improved, these well completion and stimulation technologies for offshore hydrocarbon resource development have progressed over many decades. To increase public understanding of these technologies, the National Academies of Sciences, Engineering, and Medicine established a planning committee to organize and convene a workshop on Offshore Well Completion and Stimulation: Using Hydraulic Fracturing and Other Technologies on October 2-3, 2017, in Washington, DC. This workshop examined the unique features about operating in the U.S. offshore environment, including well completion and stimulation technologies, environmental considerations and concerns, and health and safety management. Participants from across government, industry, academia, and nonprofit sectors shared their perspectives on operational and regulatory approaches to mitigating risks to the environment and to humans in the development of offshore resources. This publication summarizes the presentations and discussions from the workshop.
Download or read book Offshore Safety written by United States. Congress. House. Committee on Merchant Marine and Fisheries. Subcommittee on Panama Canal/Outer Continental Shelf and published by . This book was released on 1983 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Offshore Safety Management written by Ian Sutton and published by William Andrew. This book was released on 2011-10-21 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offshore Safety Management -- Significant Events -- SEMP -- Safety and Environmental Management Systems (SEMS) -- The Elements of SEMS -- Implementing SEMS -- Safety Cases -- Formal Safety Assessments.
Download or read book Strengthening the Safety Culture of the Offshore Oil and Gas Industry written by National Academies of Sciences, Engineering, and Medicine (U.S.). Committee on U.S. Offshore Oil and Gas Industry Safety Culture and published by . This book was released on 2016 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: "TRB Special Report 321: Strengthening the Safety Culture of the Offshore Oil and Gas Industry offers recommendations to industry and regulators to strengthen and sustain the safety culture of the offshore oil and gas industry. The committee that prepared the report addresses conceptual challenges in defining safety culture and discusses the empirical support for the definition of safety culture offered by the Bureau of Safety and Environmental Enforcement, the nine characteristics or elements of a robust safety culture, methods for assessing company safety culture, and barriers to improving safety culture in the offshore industry. The committee's report also identifies topics on which further research is needed with respect to assessing, improving, and sustaining safety culture"--Provided by publisher.
Download or read book Process Safety in Upstream Oil and Gas written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2021-04-13 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book makes the case for process safety and provides a brief overviews of the upstream industry and of CCPS Risk Based Process Safety. The majority of the book focuses on the concepts of implementing process safety in wells, onshore, offshore, and projects. Topics include Overview of Upstream Operations; Overview of Risk Based Process Safety (RBPS); Application of RBPS in Drilling, Completions, Work-Overs & Interventions, Application of RBPS in Onshore Production, Application of RBPS in Offshore Production, Application of RBPS to Engineering Design, Installation, and Construction, Future Developments in the Field
Download or read book Macondo Well Deepwater Horizon Blowout written by National Research Council and published by National Academies Press. This book was released on 2012-03-02 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: The blowout of the Macondo well on April 20, 2010, led to enormous consequences for the individuals involved in the drilling operations, and for their families. Eleven workers on the Deepwater Horizon drilling rig lost their lives and 16 others were seriously injured. There were also enormous consequences for the companies involved in the drilling operations, to the Gulf of Mexico environment, and to the economy of the region and beyond. The flow continued for nearly 3 months before the well could be completely killed, during which time, nearly 5 million barrels of oil spilled into the gulf. Macondo Well-Deepwater Horizon Blowout examines the causes of the blowout and provides a series of recommendations, for both the oil and gas industry and government regulators, intended to reduce the likelihood and impact of any future losses of well control during offshore drilling. According to this report, companies involved in offshore drilling should take a "system safety" approach to anticipating and managing possible dangers at every level of operation-from ensuring the integrity of wells to designing blowout preventers that function under all foreseeable conditions-in order to reduce the risk of another accident as catastrophic as the Deepwater Horizon explosion and oil spill. In addition, an enhanced regulatory approach should combine strong industry safety goals with mandatory oversight at critical points during drilling operations. Macondo Well-Deepwater Horizon Blowout discusses ultimate responsibility and accountability for well integrity and safety of offshore equipment, formal system safety education and training of personnel engaged in offshore drilling, and guidelines that should be established so that well designs incorporate protection against the various credible risks associated with the drilling and abandonment process. This book will be of interest to professionals in the oil and gas industry, government decision makers, environmental advocacy groups, and others who seek an understanding of the processes involved in order to ensure safety in undertakings of this nature.
Download or read book Offshore Process Safety written by and published by Academic Press. This book was released on 2018-06-18 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methods in Chemical Process Safety, Volume Two, the latest release in a serial that publishes fully commissioned methods papers across the field of process safety, risk assessment, and management and loss prevention, aims to provide informative, visual and current content that appeals to both researchers and practitioners in process safety. This new release contains unique chapters on offshore safety, offshore platform safety, human factors in offshore operation, marine safety, safety during well drilling and operation, safety during processing (top side), safety during transportation of natural resources (offshore pipeline), and regulatory context Helps acquaint the reader/researcher with the fundamentals of process safety Provides the most recent advancements and contributions on the topic from a practical point-of-view Presents users with the views/opinions of experts in each topic Includes a selection of the author(s) of each chapter from among the leading researchers and/or practitioners for each given topic
Download or read book Technology and Safety of Marine Systems written by J. Wang and published by Elsevier. This book was released on 2003-07-22 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditionally society has regulated hazardous industries by detailed references to engineering codes, standards and hardware requirements. These days a risk-based approach is adopted. Risk analysis involves identifying hazards, categorizing the risks, and providing the necessary decision support to determine the necessary arrangements and measures to reach a "safe" yet economical operating level. When adopting such an approach the abundance of techniques available to express risk levels can often prove confusing and inadequate. This highly practical guide to safety and risk analysis in Marine Systems not only adds to the current techniques available, but more importantly identifies instances where traditional techniques fall short. Uncertainties that manifest within risk analysis are highlighted and alternative solutions presented. In addition to risk analysis techniques this book addresses influencing elements including: reliability, Maintenance Decision making and Human error. The highly practical approach of this title ensures it is accessible to the widest possible audience
Download or read book Lees Loss Prevention in the Process Industries written by Frank Lees and published by Elsevier. This book was released on 2005-01-25 with total page 3708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last three decades the process industries have grown very rapidly, with corresponding increases in the quantities of hazardous materials in process, storage or transport. Plants have become larger and are often situated in or close to densely populated areas. Increased hazard of loss of life or property is continually highlighted with incidents such as Flixborough, Bhopal, Chernobyl, Three Mile Island, the Phillips 66 incident, and Piper Alpha to name but a few. The field of Loss Prevention is, and continues to, be of supreme importance to countless companies, municipalities and governments around the world, because of the trend for processing plants to become larger and often be situated in or close to densely populated areas, thus increasing the hazard of loss of life or property. This book is a detailed guidebook to defending against these, and many other, hazards. It could without exaggeration be referred to as the "bible" for the process industries. This is THE standard reference work for chemical and process engineering safety professionals. For years, it has been the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing reference instead. Frank Lees' world renowned work has been fully revised and expanded by a team of leading chemical and process engineers working under the guidance of one of the world’s chief experts in this field. Sam Mannan is professor of chemical engineering at Texas A&M University, and heads the Mary Kay O’Connor Process Safety Center at Texas A&M. He received his MS and Ph.D. in chemical engineering from the University of Oklahoma, and joined the chemical engineering department at Texas A&M University as a professor in 1997. He has over 20 years of experience as an engineer, working both in industry and academia. New detail is added to chapters on fire safety, engineering, explosion hazards, analysis and suppression, and new appendices feature more recent disasters. The many thousands of references have been updated along with standards and codes of practice issued by authorities in the US, UK/Europe and internationally. In addition to all this, more regulatory relevance and case studies have been included in this edition. Written in a clear and concise style, Loss Prevention in the Process Industries covers traditional areas of personal safety as well as the more technological aspects and thus provides balanced and in-depth coverage of the whole field of safety and loss prevention. * A must-have standard reference for chemical and process engineering safety professionals * The most complete collection of information on the theory, practice, design elements, equipment and laws that pertain to process safety * Only single work to provide everything; principles, practice, codes, standards, data and references needed by those practicing in the field
Download or read book Offshore Safety written by Institute of Marine Engineers and published by . This book was released on 1992 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Safety and Reliability Safe Societies in a Changing World written by Stein Haugen and published by CRC Press. This book was released on 2018-06-15 with total page 3202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety and Reliability – Safe Societies in a Changing World collects the papers presented at the 28th European Safety and Reliability Conference, ESREL 2018 in Trondheim, Norway, June 17-21, 2018. The contributions cover a wide range of methodologies and application areas for safety and reliability that contribute to safe societies in a changing world. These methodologies and applications include: - foundations of risk and reliability assessment and management - mathematical methods in reliability and safety - risk assessment - risk management - system reliability - uncertainty analysis - digitalization and big data - prognostics and system health management - occupational safety - accident and incident modeling - maintenance modeling and applications - simulation for safety and reliability analysis - dynamic risk and barrier management - organizational factors and safety culture - human factors and human reliability - resilience engineering - structural reliability - natural hazards - security - economic analysis in risk management Safety and Reliability – Safe Societies in a Changing World will be invaluable to academics and professionals working in a wide range of industrial and governmental sectors: offshore oil and gas, nuclear engineering, aeronautics and aerospace, marine transport and engineering, railways, road transport, automotive engineering, civil engineering, critical infrastructures, electrical and electronic engineering, energy production and distribution, environmental engineering, information technology and telecommunications, insurance and finance, manufacturing, marine transport, mechanical engineering, security and protection, and policy making.
Download or read book Occupational Health and Safety written by Sharon Clarke and published by CRC Press. This book was released on 2016-05-23 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Workplace accidents and errors cost organizations hundreds of billions of dollars each year, and the injured workers and their families endure considerable financial and emotional suffering. It's obvious that increasing employee health and safety pays. The accumulating evidence shows that investing in occupational health and safety results in improved financial and social responsibility performance. There are extensive country differences and wide occupational differences in the incidence of accidents and errors. The International Labour Organization (ILO) estimates that every year there are 2.2 million fatal and 270 million non-fatal accidents or occupational diseases worldwide. Occupational Health and Safety looks at the research into what causes accidents and errors in the workplace. In line with other titles in the series, Occupational Health and Safety emphasizes the psychological and behavioral aspects of risk in organizations. It highlights how organizations differ in their health and safety performance, with case studies throughout and best practices. Key elements focus on: employee selection and training, fostering employee understanding, participation and engagement in health and safety matters, developing a health and safety culture at organizational and group/work unit levels, communicating and reinforcing safe workplace practices and bench-marking one's organization against the industry leaders. The contributors to this volume come from various countries, reflecting unique interest and knowledge in particular areas.
Download or read book Offshore Safety Management written by Ian Sutton and published by William Andrew. This book was released on 2013-11-22 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offshore Safety Management, Second Edition provides an experienced engineer's perspective on the new Safety and Environmental System (SEMS) regulations for offshore oil and gas drilling, how they compare to prior regulations, and how to implement the new standards seamlessly and efficiently. The second edition is greatly expanded, with increased coverage of technical areas such as engineering standards and drilling, and procedural areas such as safety cases and formal safety assessments. The new material both complements the SEMS coverage and increases the book's relevance to a global audience. Following the explosion, fire, and sinking of the Deepwater Horizon floating drilling rig in April 2010, the Bureau of Ocean Energy Management, Regulations, and Enforcement (BOEMRE) issued many new regulations. One of them was the Safety and Environmental System rule, which is based on the American Petroleum Institute's SEMP recommended practice, finalized in April 2013. Author Ian Sutton explains the SEMS rule, and describes what must be done to achieve compliance. Each of the twelve elements of the SEMS rule (such as Management of Change and Safe Work Practices) is described in the book, and guidance is provided on how to meet BOEMRE requirements. Detailed explanation of how to implement the new SEMS standard for offshore operations Ties the new regulations in with existing safety management approaches, helping managers leverage existing processes and paperwork With CEOs now signing off on compliance paperwork, this book provides expert insights so you can get SEMS compliance right the first time
Download or read book Methods in Chemical Process Safety written by and published by Academic Press. This book was released on 2017-04-06 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methods in Chemical Process Safety, Volume 1, publishes fully commissioned reviews across the field of process safety, risk assessment and management and loss prevention. It aims to serve as an informative tool and user manual for process safety for both engineering researchers and practitioners. Publishing one themed volume a year, the publication provides a resource detailing the latest methods in the field of chemical process safety. Helps acquaint the reader/researcher with the fundamentals of process safety Provides the most recent advancements and contributions on the topic from a practical point-of-view Presents users with the views/opinions of experts in each topic Includes a selection of the author(s) of each chapter from among the leading researchers and/or practitioners for each given topic
Download or read book Proceedings of the Marine Safety Council written by and published by . This book was released on 1993 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:
