Download or read book Official Guide to Certified SOLIDWORKS Associate Exams CSWA CSWA SD CSWA S CSWA AM SOLIDWORKS 2020 2023 written by David C. Planchard and published by SDC Publications. This book was released on with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written to assist you with passing the SOLIDWORKS associate level exams. It provides you with detailed information and exercises that will aid you in passing the following exams: Certified SOLIDWORKS Associate (CSWA), Certified SOLIDWORKS Associate Sustainable Design (CSWA-SD), Certified SOLIDWORKS Associate Simulation (CSWA-S) and the Certified SOLIDWORKS Associate Additive Manufacturing (CSWA-AM) exam. There are three goals for this book. The primary goal of this book is not only to help you pass the CSWA, CSWA-SD, CSWA-S and CSWA-AM exams, but also to ensure that you understand and comprehend the concepts and implementation details of the four certification processes. The second goal is to provide the most comprehensive coverage of CSWA, CSWA-SD, CSWA-S and CSWA-AM exam related topics available, without too much coverage of topics not on the exam. The third and ultimate goal is to get you from where you are today to the point that you can confidently pass the CSWA, CSWA-SD, CSWA-S and CSWA-AM exams. CSWA Exam The CSWA certification indicates a foundation in and apprentice knowledge of 3D CAD design and engineering practices and principles. The intended audience for this section of the book is anyone trying to take and pass the CSWA exam with a minimum of 6 - 9 months of SOLIDWORKS experience and basic knowledge of engineering fundamentals and practices. SOLIDWORKS recommends that you review their SOLIDWORKS Tutorials on Parts, Assemblies and Drawings as a prerequisite and have at least 45 hours of classroom time learning SOLIDWORKS or using SOLIDWORKS with basic engineering design principles and practices. CSWA-SD Exam The Certified SOLIDWORKS Associate Sustainable Design (CSWA-SD) certification indicates a foundation in and apprentice knowledge of demonstrating an understanding in the principles of environmental assessment and sustainable design. This section of the book is intended for anyone interested in Sustainable design as well as life cycle assessment and trying to take and pass the CSWA-SD exam. Although no hands-on usage of SOLIDWORKS is required for the CSWA-SD certification exam, it is a good idea to review the SOLIDWORKS SustainablityXpress and SOLIDWORKS Sustainability tutorials inside of SOLIDWORKS to better understand the actual workflow. The CSWA-SD is based off the SOLIDWORKS Sustainable Design Guide that incorporates concepts including sustainability, environmental assessment and life cycle impact assessment. CSWA-S Exam The Certified SOLIDWORKS Associate Simulation (CSWA-S) certification indicates a foundation in and apprentice knowledge of demonstrating an understanding in the principles of stress analysis and the Finite Element Method (FEM). The CSWA-S section of the book is for anyone trying to take and pass the CSWA-S with a minimum of 6 - 9 months of SOLIDWORKS experience and knowledge in the following areas: Engineering Mechanics - Statics, Strength of Materials, Finite Element Method/Finite Element Analysis Theory, Applied concepts in SOLIDWORKS Simulation: namely Static Analysis, Solid, Shell, and Beam elements, Connections and Applying loads and boundary conditions and interpreting results. The purpose of this section in the book is NOT to educate a new or intermediate user on SOLIDWORKS Simulation, but to cover and to inform you on the types of questions, layout and what to expect when taking the CSWA-S exam. CSWA-AM Exam The Certified SOLIDWORKS Associate Additive Manufacturing (CSWA-AM) certification indicates a foundation in and apprentice knowledge of today’s 3D printing technology and market. The intended audience for this section of the book is anyone trying to take and pass the CSWA-AM exam and an interest in Additive Manufacturing. The CSWA-AM exam is meant to be taken after the completion of the 10-part learning path located on MySOLIDWORKS.com. The CSWA-AM exam fundamentally covers two 3D printing technologies: Fused Filament Fabrication (FFF) and STereoLithography (SLA). There are a few questions on Selective Laser Sintering (SLS) technology and available software-based printing aids.

Download or read book Official Guide to Certified SOLIDWORKS Associate Exams CSWA CSWA SD CSWSA S CSWA AM SOLIDWORKS 2019 2021 written by David Planchard and published by SDC Publications. This book was released on 2020-11 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written to assist you with passing the SOLIDWORKS associate level exams. It provides you with detailed information and exercises that will aid you in passing the following exams: Certified SOLIDWORKS Associate (CSWA), Certified SOLIDWORKS Associate Sustainable Design (CSWA-SD), Certified SOLIDWORKS Associate Simulation (CSWSA-S) and the Certified SOLIDWORKS Associate Additive Manufacturing (CSWA-AM) exam. There are three goals for this book. The primary goal of this book is not only to help you pass the CSWA, CSWA-SD, CSWSA-S and CSWA-AM exams, but also to ensure that you understand and comprehend the concepts and implementation details of the four certification processes. The second goal is to provide the most comprehensive coverage of CSWA, CSWA-SD, CSWSA-S and CSWA-AM exam related topics available, without too much coverage of topics not on the exam. The third and ultimate goal is to get you from where you are today to the point that you can confidently pass the CSWA, CSWA-SD, CSWSA-S and CSWA-AM exams. CSWA Exam The CSWA certification indicates a foundation in and apprentice knowledge of 3D CAD design and engineering practices and principles. The intended audience for this section of the book is anyone trying to take and pass the CSWA exam with a minimum of 6 - 9 months of SOLIDWORKS experience and basic knowledge of engineering fundamentals and practices. SOLIDWORKS recommends that you review their SOLIDWORKS Tutorials on Parts, Assemblies and Drawings as a prerequisite and have at least 45 hours of classroom time learning SOLIDWORKS or using SOLIDWORKS with basic engineering design principles and practices. CSWA-SD Exam The Certified SOLIDWORKS Associate Sustainable Design (CSWA-SD) certification indicates a foundation in and apprentice knowledge of demonstrating an understanding in the principles of environmental assessment and sustainable design. This section of the book is intended for anyone interested in Sustainable design as well as life cycle assessment and trying to take and pass the CSWA-SD exam. Although no hands-on usage of SOLIDWORKS is required for the CSWA-SD certification exam, it is a good idea to review the SOLIDWORKS SustainablityXpress and SOLIDWORKS Sustainability tutorials inside of SOLIDWORKS to better understand the actual workflow. The CSWA-SD is based off the SOLIDWORKS Sustainable Design Guide that incorporates concepts including sustainability, environmental assessment and life cycle impact assessment. CSWSA-S Exam The Certified SOLIDWORKS Associate Simulation (CSWSA-S) certification indicates a foundation in and apprentice knowledge of demonstrating an understanding in the principles of stress analysis and the Finite Element Method (FEM). The CSWSA-S section of the book is for anyone trying to take and pass the CSWSA-S with a minimum of 6 - 9 months of SOLIDWORKS experience and knowledge in the following areas: Engineering Mechanics - Statics, Strength of Materials, Finite Element Method/Finite Element Analysis Theory, Applied concepts in SOLIDWORKS Simulation: namely Static Analysis, Solid, Shell, and Beam elements, Connections and Applying loads and boundary conditions and interpreting results. The purpose of this section in the book is NOT to educate a new or intermediate user on SOLIDWORKS Simulation, but to cover and to inform you on the types of questions, layout and what to expect when taking the CSWSA-S exam. CSWA-AM Exam The Certified SOLIDWORKS Associate Additive Manufacturing (CSWA-AM) certification indicates a foundation in and apprentice knowledge of today’s 3D printing technology and market. The intended audience for this section of the book is anyone trying to take and pass the CSWA-AM exam and an interest in Additive Manufacturing. The CSWA-AM exam is meant to be taken after the completion of the 10-part learning path located on MySOLIDWORKS.com. The CSWA-AM exam fundamentally covers two 3D printing technologies: Fused Filament Fabrication (FFF) and STereoLithography (SLA). There are a few questions on Selective Laser Sintering (SLS) technology and available software-based printing aids.

Download or read book Engineering Graphics with SOLIDWORKS 2023 written by David Planchard and published by SDC Publications. This book was released on with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Graphics with SOLIDWORKS 2023 is written to assist students, designers, engineers and professionals who are new to SOLIDWORKS. The book combines the fundamentals of engineering graphics and dimensioning practices with a step-by-step project based approach to learning SOLIDWORKS. The book is divided into four sections with 11 Chapters. Chapters 1 - 3: Explore the history of engineering graphics, manual sketching techniques, orthographic projection, Third vs. First angle projection, multi-view drawings, dimensioning practices (ASME Y14.5-2009 standard), line type, fit type, tolerance, fasteners in general, general thread notes and the history of CAD leading to the development of SOLIDWORKS. Chapters 4 - 9: Comprehend the SOLIDWORKS User Interface and CommandManager, Document and System properties, simple machine parts, simple and complex assemblies, proper design intent, design tables, configurations, multi-sheet, multi-view drawings, BOMs, and Revision tables using basic and advanced features. Follow the step-by-step instructions in over 80 activities to develop eight parts, four sub-assemblies, three drawings and six document templates. Chapter 10: Prepare for the Certified SOLIDWORKS Associate (CSWA) exam. Understand the curriculum and categories of the CSWA exam and the required model knowledge needed to successfully take the exam. Chapter 11: Provide a basic understanding between Additive vs. Subtractive manufacturing. Discuss Fused Filament Fabrication (FFF), STereoLithography (SLA), and Selective Laser Sintering (SLS) printer technology. Select suitable filament material. Comprehend 3D printer terminology. Knowledge of preparing, saving, and printing a model on a Fused Filament Fabrication 3D printer. Information on the Certified SOLIDWORKS Additive Manufacturing (CSWA-AM) exam. Review individual features, commands, and tools using SOLIDWORKS Help. The chapter exercises analyze and examine usage competencies based on the chapter objectives. The book is designed to complement the SOLIDWORKS Tutorials located in the SOLIDWORKS Help menu. Desired outcomes and usage competencies are listed for each project. Know your objectives up front. Follow the step-by step procedures to achieve your design goals. Work between multiple documents, features, commands, and properties that represent how engineers and designers utilize SOLIDWORKS in industry. The author developed the industry scenarios by combining his own industry experience with the knowledge of engineers, department managers, vendors and manufacturers.

Download or read book SOLIDWORKS 2023 Quick Start written by David Planchard and published by SDC Publications. This book was released on 2023-02-28 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: SOLIDWORKS 2023 Quick Start introduces new users to the basics of using SOLIDWORKS 3D CAD software in five easy lessons. This book is intended for the student or designer who needs to learn SOLIDWORKS quickly and effectively. This book is perfect for engineers in industry who are expected to have SOLIDWORKS skills for their company’s next project or students who need to learn SOLIDWORKS without taking a comprehensive CAD course. Based on years of teaching SOLIDWORKS to engineering students, SOLIDWORKS 2023 Quick Start concentrates on the areas where new users can improve efficiency in the design modeling process. By learning the correct SOLIDWORKS skills and file management techniques, you gain the most knowledge in the shortest period of time. This book begins with an overview of SOLIDWORKS and the User Interface (UI), its menus, toolbars and commands. With a quick pace, you learn the essentials of 2D sketching, part and assembly creation, perform motion study, develop detailed part and assembly drawings and much more. Throughout this book you develop a mini Stirling Engine and investigate the proper design intent and constraints. Bonus Chapters Two bonus chapters are included with this book. Chapter six is a review of the Certified SOLIDWORKS Associate (CSWA) exam. It will help you understand the curriculum and categories of the CSWA exam and the required model knowledge needed to successfully take and pass the exam. Chapter seven is an introduction to additive manufacturing (3D printing). It covers the difference between additive and subtractive manufacturing, 3D printer terminology, knowledge of preparing, saving, and printing a model on a Fused Filament Fabrication 3D printer and much more. This chapter also includes information on the Certified SOLIDWORKS Additive Manufacturing Certification (CSWA-AM) exam.

Download or read book Official Certified SOLIDWORKS Professional Certification Guide SOLIDWORKS 2020 2023 written by David C. Planchard and published by SDC Publications. This book was released on 2022-11 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will provide you with a wealth of information about the three segments of the CSWP CORE exam. The intended audience for this book is a person who has passed the CSWA exam and who has eight or more months of SOLIDWORKS training and usage. This guide is not intended to teach you how to use SOLIDWORKS, but is written to provide you with CSWP exam tips, hints and information on sample questions and categories that are aligned with the exam. This guide is written to help you take and pass the CSWP exam. The book is organized into three chapters. Each chapter is focused on a segment of the CSWP CORE exam. This is not intended to be a step-by-step book. Goals of this book The primary goal is not only to help you pass the CSWP CORE exam, but also to ensure that you understand and comprehend the concepts and implementation details of the process. The second goal is to provide the most comprehensive coverage of CSWP CORE exam related topics available, without too much coverage of topics not on the exam. The third and ultimate goal is to get you from where you are today to the point that you can confidently pass all three segments of the CSWP CORE exam. Who this book is for The intended audience for this book and the CSWP exam is a person who has passed the CSWA exam and who has eight or more months of SOLIDWORKS training and usage. However, passing the CSWA exam is not a prerequisite for taking the CSWP exam if you are a commercial user in industry. For students that take the CSWP exam through their school, you must first pass the CSWA exam.

Download or read book SOLIDWORKS 2024 Tutorial written by David Planchard and published by SDC Publications. This book was released on with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: • Uses step-by-step, project based tutorials designed for beginning or intermediate users • Will prepare you for the Certified SOLIDWORKS Associate Exam • Includes a chapter introducing you to 3D printing • This edition includes a bonus eBook on SOLIDWORKS and the 3DEXPERIENCE platform Get ready to take your 3D CAD skills to the next level with SOLIDWORKS 2024 Tutorial. Whether you're a student, designer, engineer, or professional who’s new to SOLIDWORKS, this book is the ultimate guide to mastering SOLIDWORKS’ impressive capabilities. And if you're preparing for the Certified SOLIDWORKS Associate - Mechanical Design (CSWA) exam, you're in luck, because this book has got you covered. Featuring a project-based learning approach and step-by-step instructions, the first six chapters cover the User Interface, CommandManager, Document and System properties, and beyond, with exploration of everything from design intent and design tables to configurations, multi-sheet drawings, BOMs, and Revision tables. Use basic and advanced features to create simple and complex parts and assemblies. And, for the grand finale, chapter 6 takes you through the creation of a robot assembly, complete with all the assemblies and components you'll need. Information and examples on the five categories in the CSWA exam are embedded throughout the book, but chapters 7-10 specifically focus on preparation for the Certified SOLIDWORKS Associate - Mechanical Design (CSWA) exam, which will confirm you have a foundation in and apprentice knowledge of 3D CAD and engineering principles.And, for those looking to explore the exciting world of additive manufacturing (3D printing), chapter 11 presents the benefits of 3D printing, how it differs from subtractive manufacturing, and the terminology and technology used in low-cost 3D printers. With clear, concise instructions and desired outcomes listed for each chapter of the tutorial, you'll know exactly what you're working towards every step of the way. Work between multiple documents, features and commands like a pro. Build multiple assemblies that combine over 100 extruded machined parts and components; and develop the skills to create, modify and edit sketches and solid features. Plus, you'll learn how to reuse features, parts, and assemblies through symmetry, patterns, copied components, and more. Start learning by doing and become a 3D CAD expert with SOLIDWORKS 2024 Tutorial. Includes a Bonus eBook Covering SOLIDWORKS and 3DEXPERIENCE® Platform Included with your purchase of this book is a bonus eBook titled SOLIDWORKS and the 3DEXPERIENCE® Platform. This eBook is an insightful guide that introduces you to the 3DEXPERIENCE Platform and its integration with SOLIDWORKS. This resource simplifies complex concepts, allowing users to collaborate efficiently in a single modeling environment accessible through the SOLIDWORKS Task Pane. The book features nine detailed, step-by-step tutorials, complete with models to practice and understand the tools and advantages of using SOLIDWORKS with the 3DEXPERIENCE platform. This guide will help you understand the 3DEXPERIENCE Platform's capabilities demonstrating practical, real-world applications in educational and professional settings. It's an essential resource for anyone looking to leverage the full potential of SOLIDWORKS in conjunction with the 3DEXPERIENCE platform.

Download or read book Engineering Graphics with SOLIDWORKS 2024 written by David Planchard and published by SDC Publications. This book was released on with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: • Covers engineering graphics and SOLIDWORKS 2024 in a step-by-step manner • Designed for beginning or intermediate SOLIDWORKS users • Contains a chapter on the Certified SOLIDWORKS Associate CSWA program • Includes a chapter introducing you to 3D printing • This edition includes a bonus eBook on SOLIDWORKS and the 3DEXPERIENCE platform Engineering Graphics with SOLIDWORKS 2024 is the ultimate guide for students, designers, engineers, and professionals who want to master SOLIDWORKS. With a focus on combining the fundamentals of engineering graphics and dimensioning practices with a hands-on, project-based approach, this book takes you on a journey through 11 comprehensive chapters. Start by exploring the history of engineering graphics and manual sketching techniques, dive into orthographic projection, multi-view drawings, and dimensioning practices, and understand the evolution of CAD to the development of SOLIDWORKS. Then, master the SOLIDWORKS User Interface and CommandManager, learn how to create simple machine parts and complex assemblies, and how to use design tables, configurations, multi-sheet drawings, BOMs, and revision tables. With over 80 step-by-step activities, you'll develop eight parts, four sub-assemblies, three drawings, and six document templates. After developing your SOLIDWORKS skills in chapters 1-9, Chapter 10 fully prepares you for the Certified SOLIDWORKS Associate (CSWA) exam, providing detailed information on the curriculum and model knowledge required to ace the exam. You'll gain an in-depth understanding of the exam itself, its intended audience, what to expect during the exam, and even get sample exam questions to help you prepare. Take your skills to the next level with Chapter 11, where you'll delve into the fascinating world of 3D printing! You'll discover the differences between additive and subtractive manufacturing, and explore the fundamental concepts of 3D printer terminology, suitable filament materials, and general printing tips. Uncover the intricacies of Fused Filament Fabrication (FFF), STereoLithography (SLA), and Selective Laser Sintering (SLS) 3D printer technologies, and get hands-on experience with preparing, saving, and printing a model on a Fused Filament Fabrication 3D printer. With desired outcomes and usage competencies listed for each chapter, you'll know your objectives up front and follow the step-by-step procedures to achieve your design goals. The author draws on his own industry experience and the knowledge of experts to provide real-world scenarios, giving you a comprehensive understanding of how SOLIDWORKS is used in industry. This book is designed to complement the SOLIDWORKS Tutorials in the SOLIDWORKS Help menu, making it the best resource for anyone looking to master SOLIDWORKS and engineering graphics.

Download or read book Official Guide to Certified SOLIDWORKS Associate Exams CSWA CSWA SD CSWSA FEA CSWA AM 2017 2019 written by David Planchard and published by SDC Publications. This book was released on 2019-01-15 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written to assist you with passing the SOLIDWORKS associate level exams. It provides you with detailed information and exercises that will aid you in passing the following exams: Certified SOLIDWORKS Associate (CSWA), Certified SOLIDWORKS Associate Sustainable Design (CSWA-SD), Certified SOLIDWORKS Simulation Associate Finite Element Analysis (CSWSA-FEA) and the Certified SOLIDWORKS Associate Additive Manufacturing (CSWA-AM) exam. There are three goals for this book. The primary goal of this book is not only to help you pass the CSWA, CSWA-SD, CSWSA-FEA and CSWA-AM exams, but also to ensure that you understand and comprehend the concepts and implementation details of the four certification processes. The second goal is to provide the most comprehensive coverage of CSWA, CSWA-SD, CSWSA-FEA and CSWA-AM exam related topics available, without too much coverage of topics not on the exam. The third and ultimate goal is to get you from where you are today to the point that you can confidently pass the CSWA, CSWA-SD, CSWSA-FEA and CSWA-AM exams.

Download or read book Engineering Design with SOLIDWORKS 2023 written by David Planchard and published by SDC Publications. This book was released on with total page 883 pages. Available in PDF, EPUB and Kindle. Book excerpt: • A comprehensive introduction to SOLIDWORKS using tutorial style, step-by-step instructions • Designed for beginning or intermediate SOLIDWORKS users • Learn to create parts and assemblies using machined, plastic and sheet metal components • Also covers Simulation, Sustainability, and Intelligent Modeling techniques • Includes bonus chapters on the CSWA exam and 3D printing Engineering Design with SOLIDWORKS 2023 is written to assist students, designers, engineers and professionals. The book provides a solid foundation in SOLIDWORKS by utilizing projects with step-by-step instructions for the beginner to intermediate SOLIDWORKS user featuring machined, plastic and sheet metal components. Desired outcomes and usage competencies are listed for each project. The book is divided into five sections with 11 projects. Project 1 - Project 6: Explore the SOLIDWORKS User Interface and CommandManager, Document and System properties, simple and complex parts and assemblies, proper design intent, design tables, configurations, multi-sheet, multi-view drawings, BOMs, and Revision tables using basic and advanced features. Additional techniques include the edit and reuse of features, parts, and assemblies through symmetry, patterns, configurations, SOLIDWORKS 3D ContentCentral and the SOLIDWORKS Toolbox. Project 7: Understand Top-Down assembly modeling and Sheet Metal parts. Develop components In-Context with InPlace Mates, along with the ability to import parts using the Top-Down assembly method. Convert a solid part into a Sheet Metal part and insert and apply various Sheet Metal features. Project 8 - Project 9: Recognize SOLIDWORKS Simulation and Intelligent Modeling techniques. Understand a general overview of SOLIDWORKS Simulation and the type of questions that are on the SOLIDWORKS Simulation Associate - Finite Element Analysis (CSWSA-FEA) exam. Apply design intent and intelligent modeling techniques in a sketch, feature, part, plane, assembly and drawing. Project 10: Comprehend the differences between additive and subtractive manufacturing. Understand 3D printer terminology along with a working knowledge of preparing, saving, and printing CAD models on a low cost printer. Project 11: Review the Certified SOLIDWORKS Associate (CSWA) program. Understand the curriculum and categories of the CSWA exam and the required model knowledge needed to successfully take the exam. The author developed the industry scenarios by combining his own industry experience with the knowledge of engineers, department managers, vendors and manufacturers. These professionals are directly involved with SOLIDWORKS every day. Their responsibilities go far beyond the creation of just a 3D model.

Download or read book Engineering Design with SOLIDWORKS 2024 written by David Planchard and published by SDC Publications. This book was released on 2024-03 with total page 813 pages. Available in PDF, EPUB and Kindle. Book excerpt: • A comprehensive introduction to SOLIDWORKS using tutorial style, step-by-step instructions • Designed for beginning or intermediate SOLIDWORKS users • Learn to create parts and assemblies using machined, plastic and sheet metal components • Also covers Simulation, Sustainability, and Intelligent Modeling techniques • Includes bonus chapters on the CSWA exam and 3D printing • This edition features a new chapter and a bonus eBook on SOLIDWORKS and the 3DEXPERIENCE platform Are you looking to learn SOLIDWORKS? As luck would have it, you have found the perfect SOLIDWORKS resource for students, designers, engineers and professionals alike! Engineering Design with SOLIDWORKS 2024 provides a solid foundation in SOLIDWORKS by using projects with step-by-step instructions that are perfect for both beginners and intermediate users. Each project begins with desired outcomes and usage competencies, so you’ll know exactly what you’ll learn and how to apply it. Projects build your skills incrementally. Throughout the book you’ll learn to create machined, plastic, and sheet metal components, explore the SOLIDWORKS user interface, CommandManager, and document and system properties. You’ll discover how to design simple and complex parts and assemblies with proper design intent. You’ll also explore how to use the SOLIDWORKS Toolbox and symmetry, patterns and configurations to edit and reuse features and parts like the pros do. And that’s just the first six projects! Next, you’ll investigate top-down assembly modeling, develop components in-context with InPlace Mates, convert a solid part into sheet metal and insert and apply sheet metal features. With projects 8 and 9, you’ll learn how to apply intelligent modeling techniques to a sketch, feature, or any SOLIDWORKS creation. Prepare for the SOLIDWORKS Simulation Associate – Finite Element Analysis (CSWSA-FEA) exam with an overview of SOLIDWORKS Simulation, important concepts, and practice exam questions. Plus, bonus material in projects 10 and 11 describes the differences between additive and subtractive manufacturing, and everything you need to know about 3D printing and the Certified SOLIDWORKS Associate Exam (CSWA). You will be delighted to find this is not just a dry technical manual. The realistic project scenarios were created with the author’s industry expertise and input of engineers, department managers, vendors and manufacturers who use SOLIDWORKS every day. Whether you’re looking to enhance your career or simply want to expand your knowledge of SOLIDWORKS, Engineering Design with SOLIDWORKS 2024 is the ideal resource for you. Includes a Bonus eBook Covering SOLIDWORKS and 3DEXPERIENCE® Platform Included with your purchase of this book is a bonus eBook titled SOLIDWORKS and the 3DEXPERIENCE® Platform. This eBook is an insightful guide that introduces you to the 3DEXPERIENCE Platform and its integration with SOLIDWORKS. This resource simplifies complex concepts, allowing users to collaborate efficiently in a single modeling environment accessible through the SOLIDWORKS Task Pane. The book features nine detailed, step-by-step tutorials, complete with models to practice and understand the tools and advantages of using SOLIDWORKS with the 3DEXPERIENCE platform. This guide will help you understand the 3DEXPERIENCE Platform's capabilities demonstrating practical, real-world applications in educational and professional settings. It's an essential resource for anyone looking to leverage the full potential of SOLIDWORKS in conjunction with the 3DEXPERIENCE platform.

Download or read book SOLIDWORKS 2023 Tutorial written by David Planchard and published by SDC Publications. This book was released on with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: SOLIDWORKS 2023 Tutorial is written to assist students, designers, engineers and professionals who are new to SOLIDWORKS. The text provides a step-by-step, project based learning approach. It also contains information and examples on the five categories in the CSWA exam. The book is divided into four sections. Chapters 1 - 5 explore the SOLIDWORKS User Interface and CommandManager, Document and System properties, simple and complex parts and assemblies, proper design intent, design tables, configurations, multi-sheet, multi-view drawings, BOMs, and Revision tables using basic and advanced features. In chapter 6 you will create the final robot assembly. The physical components and corresponding Science, Technology, Engineering and Math (STEM) curriculum are available from Gears Educational Systems. All assemblies and components for the final robot assembly are provided. Chapters 7 - 10 prepare you for the Certified Associate - Mechanical Design (CSWA) exam. The certification indicates a foundation in and apprentice knowledge of 3D CAD and engineering practices and principles. Chapter 11 covers the benefits of additive manufacturing (3D printing), how it differs from subtractive manufacturing, and its features. You will also learn the terms and technology used in low cost 3D printers. Follow the step-by-step instructions and develop multiple assemblies that combine over 100 extruded machined parts and components. Formulate the skills to create, modify and edit sketches and solid features. Learn the techniques to reuse features, parts and assemblies through symmetry, patterns, copied components, apply proper design intent, design tables and configurations. Learn by doing, not just by reading. Desired outcomes and usage competencies are listed for each chapter. Know your objective up front. Follow the steps in each chapter to achieve your design goals. Work between multiple documents, features, commands, custom properties and document properties that represent how engineers and designers utilize SOLIDWORKS in industry.

Download or read book SOLIDWORKS 2024 Quick Start written by David Planchard and published by SDC Publications. This book was released on 2024-02 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: • Introduces you to the basics of SOLIDWORKS in five easy lessons • Concentrates on areas where new users can improve efficiency in the design modeling process • Develops a Stirling Engine throughout the book • Perfectly suited for schools including CAD as part of a broader course • Includes bonus chapters on the CSWA exam and 3D printing • This edition includes a bonus eBook on SOLIDWORKS and the 3DEXPERIENCE platform The perfect companion for anyone who wants to learn SOLIDWORKS quickly and effectively, SOLIDWORKS 2024 Quick Start acquaints you with the basics of SOLIDWORKS 3D CAD software in five easy lessons. This book is ideal for students, designers and engineers who want to jump into SOLIDWORKS, unleash their creativity and take their design skills to the next level today. Written by an experienced SOLIDWORKS instructor, SOLIDWORKS 2024 Quick Start is packed with tips and tricks that help new users streamline their design modeling process to make it efficient and organized. You’ll gain the most knowledge in the shortest period of time by learning proper SOLIDWORKS skills and file management techniques right from the start. Get up to speed with an overview of the software's user interface, menus, toolbars, and commands. At a brisk pace, from there you will learn 2D sketching, part and assembly creation, motion study, detailed part and assembly drawings, and BOMS using basic and advanced features. You will also develop a mini Stirling Engine and investigate the proper design intent and constraints, putting your newfound skills to the test. Two bonus chapters round out your newfound SOLIDWORKS knowledge. Chapter six reviews the Certified SOLIDWORKS Associate (CSWA) exam curriculum and model knowledge requirements. Chapter seven introduces you to additive manufacturing (3D printing), covering the difference between additive and subtractive manufacturing, 3D printer terminology, and how to prepare, save, and print a model on a Fused Filament Fabrication 3D printer. Whether you're an engineer preparing for your company's next project or a student who needs to learn SOLIDWORKS quickly without taking a comprehensive CAD course, with SOLIDWORKS 2024 Quick Start you will unlock your potential as a designer and master the software in no time. Includes a Bonus eBook Covering SOLIDWORKS and 3DEXPERIENCE® Platform Included with your purchase of this book is a bonus eBook titled SOLIDWORKS and the 3DEXPERIENCE® Platform. This eBook is an insightful guide that introduces you to the 3DEXPERIENCE Platform and its integration with SOLIDWORKS. This resource simplifies complex concepts, allowing users to collaborate efficiently in a single modeling environment accessible through the SOLIDWORKS Task Pane. The book features nine detailed, step-by-step tutorials, complete with models to practice and understand the tools and advantages of using SOLIDWORKS with the 3DEXPERIENCE platform. This guide will help you understand the 3DEXPERIENCE Platform's capabilities demonstrating practical, real-world applications in educational and professional settings. It's an essential resource for anyone looking to leverage the full potential of SOLIDWORKS in conjunction with the 3DEXPERIENCE platform.

Download or read book Official Guide to Certified SOLIDWORKS Associate Exams CSWA CSDA CSWSA FEA SOLIDWORKS 2015 2017 written by David Planchard and published by SDC Publications. This book was released on 2017-02 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Official Guide to Certified SOLIDWORKS Associate Exams: CSWA, CSDA, CSWSA-FEA is written to assist the SOLIDWORKS user to pass the associate level exams. Information is provided to aid a person to pass the Certified SOLIDWORKS Associate (CSWA), Certified SOLIDWORKS Sustainable Design Associate (CSDA) and the Certified SOLIDWORKS Simulation Associate Finite Element Analysis (CSWSA FEA) exam. There are three goals for this book. The primary goal is not only to help you pass the CSWA, CSDA and CSWSA-FEA exams, but also to ensure that you understand and comprehend the concepts and implementation details of the three certification processes. The second goal is to provide the most comprehensive coverage of CSWA, CSDA and CSWSA-FEA exam related topics available, without too much coverage of topics not on the exam. The third and ultimate goal is to get you from where you are today to the point that you can confidently pass the CSWA, CSDA and the CSWSA-FEA exam. The Certified SOLIDWORKS Associate (CSWA) certification indicates a foundation in and apprentice knowledge of 3D CAD design and engineering practices and principles. Passing this exam provides students the chance to prove their knowledge and expertise and to be part of a worldwide industry certification standard. The Certified SOLIDWORKS Sustainable Design Associate (CSDA) certification indicates a foundation in and apprentice knowledge of demonstrating an understanding in the principles of environmental assessment and sustainable design. The Certified SOLIDWORKS Simulation Associate - Finite Element Analysis (CSWSA-FEA) certification indicates a foundation in and apprentice knowledge of demonstrating an understanding in the principles of stress analysis and the Finite Element Method (FEM).

Download or read book Official Certified SOLIDWORKS Professional Certification Guide 2018 2019 2020 written by David Planchard and published by SDC Publications. This book was released on 2019-08-29 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will provide you with a wealth of information about the three segments of the CSWP CORE exam. The intended audience for this book is a person who has passed the CSWA exam and who has eight or more months of SOLIDWORKS training and usage. This guide is not intended to teach you how to use SOLIDWORKS, but is written to provide you with CSWP exam tips, hints and information on sample questions and categories that are aligned with the exam. This guide is written to help you take and pass the CSWP exam. The book is organized into three chapters. Each chapter is focused on a segment of the CSWP CORE exam. This is not intended to be a step-by-step book. Goals of this book The primary goal is not only to help you pass the CSWP CORE exam, but also to ensure that you understand and comprehend the concepts and implementation details of the process. The second goal is to provide the most comprehensive coverage of CSWP CORE exam related topics available, without too much coverage of topics not on the exam. The third and ultimate goal is to get you from where you are today to the point that you can confidently pass all three segments of the CSWP CORE exam. Who this book is for The intended audience for this book and the CSWP exam is a person who has passed the CSWA exam and who has eight or more months of SOLIDWORKS training and usage. However, passing the CSWA exam is not a prerequisite for taking the CSWP exam if you are a commercial user in industry. For students that take the CSWP exam through their school, you must first pass the CSWA exam.

Download or read book Official Certified Solidworks Associate CSWA Exam Book written by David C. Planchard and published by Delmar. This book was released on 2007 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: If you're looking for an authorized, reliable guide to prepare you to pass the Certified SolidWorks Associate (CSWA) exam, look no further-this is the only authorized CSWA preparation exam guide on the market today. Official Certified SolidWorks Associate CSWA Exam Guide covers the key topics contained on the exam with the aim of helping readers to master each topic as well as the exam itself. The book is more than a collection of practice exam questions because it also devotes attention to the concepts and implementation details that underlie the CSWA process, providing readers with a thorough and comprehensive foundation in SolidWorks. Each chapter includes specially crafted features that introduce key CSWA exam topics, explain them in detail, give the reader an opportunity to apply them in short tutorials, and identify areas of weakness. Ideal for anyone with a basic knowledge of SolidWorks and engineering fundamentals, this book will help you get the certification you need to land the best jobs, get the best promotions, and become a successful professional.Contents:Chapter 1: Basic Theory and Drawing TheoryChapter 2: Part ModelingChapter 3: Advanced Part ModelingChapter 4: Assembly ModelingChapter 5: Advanced Modeling Theory and Analysis

Download or read book Beginner s Guide to SOLIDWORKS 2021 Level I written by Alejandro Reyes and published by SDC Publications. This book was released on 2021-01-15 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to help new users learn the basic concepts of SOLIDWORKS and good solid modeling techniques in an easy to follow guide that includes video instruction. It is a great starting point for those new to SOLIDWORKS or as a teaching aid in classroom training to become familiar with the software’s interface, basic commands and strategies as users complete a series of models while learning different ways to accomplish a particular task. At the end of this book, you will have a fairly good understanding of the SOLIDWORKS interface and the most commonly used commands for part modeling, assembly and detailing after completing a series of components and their 2D drawings complete with Bill of Materials. The book focuses on the processes to complete the modeling of a part, instead of focusing on individual software commands or operations, which are generally simple enough to learn. Throughout this book the author introduces you to new commands that are required to pass the Certified SOLIDWORKS Associate exam, as listed on the SOLIDWORKS website. A dedicated chapter provides you with details about the exam, as well as a practice test to help you prepare for the actual exam. SOLIDWORKS is an easy to use CAD software that includes many time saving tools that will enable new and experienced users to complete design tasks faster than before. Most commands covered in this book have advanced options, which may not be covered in this book. This is meant to be a starting point to help new users to learn the basic and most frequently used commands.

Download or read book Official Certified SolidWorks Associate CSWA Examination Guide written by David C. Planchard and published by SDC Publications. This book was released on 2011-03-11 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most CAD professionals today recognize the need to become certified to prove their skills, prepare for new job searches, and to learn new skills while at their existing job. Specifying a Certified SolidWorks Associate (CSWA) certification on your resume is a great way to increase your chances of landing a new job, getting a promotion, or looking more qualified when representing your company on a consulting job. The primary goal of this book is not only to help you pass the CSWA exam, but also to ensure that you understand and comprehend the concepts and implementation details of the CSWA process. The second goal is to provide the most comprehensive coverage of CSWA exam related topics available, without too much coverage of topics not on the exam. The third and ultimate goal is to get you from where you are today to the point that you can confidently pass the CSWA exam. DS SolidWorks Corp. offers various stages of certification. Each stage represents increasing levels of expertise in 3D CAD design as it applies to engineering: Certified SolidWorks Associate CSWA, Certified SolidWorks Professional CSWP and Certified SolidWorks Expert CSWE along with specialty fields in Simulation, Sheet Metal, and Surfacing. The CSWA Certification indicates a foundation in and apprentice knowledge of 3D CAD design and engineering practices and principles. The main requirement for obtaining the CSWA certification is to take and pass the on-line proctored 180 minute exam (minimum of 165 out of 240 points). The new CSWA exam consists of fourteen questions in five categories. Passing this exam provides students the chance to prove their knowledge and expertise and to be part of a worldwide industry certification standard.