Download or read book Off Site and Modern Methods of Timber Construction written by Robert Hairstans and published by . This book was released on 2010 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many prefer the versatility of timber frame for panelised, volumetric and hybrid 'builtoffsite' systems. Other suitable formats include timber post and beam, and 'massive' construction using cross-laminated and structural insulated panel systems. The common thread making all these systems more efficient - and therefore more sustainable - is moving the bulk of the construction processes into well managed, factory conditions and performing the minimum installation work on site. Following a history of timber and off-site construction around the world, the author examines production concepts that improve the efficiency of timber construction. He explains key things to consider when designing buildings intended to be built off-site and reviews the many engineered timber products that facilitate a modern approach to timber construction. The book also shows how timber meets emerging design standards such as Passivhaus.
Download or read book Modern Methods of Construction and Innovative Materials written by Arthur Lyons and published by Taylor & Francis. This book was released on 2024-04-01 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new textbook has two main themes. The first is Modern Methods of Construction (MMC) which is the off-site manufacture of a wide spectrum of products, ranging from whole buildings to be transported onto site, down to smaller units or components for site integration. The second theme describes the innovation and progress towards carbon zero by the major generators of CO2 in the construction industry – namely cement, steel and masonry. The first section of the book describes and illustrates with photographs, the major forms of Modern Methods of Construction. These include fully completed 3D units, panelised systems, pods, sub-assemblies and on-site MMC. The section on Innovative Materials then describes a wide range of construction products which are entering into the built environment sector. Some new entrants are variants on well-established construction materials such as steel and concrete. Materials such as these will remain major construction materials for the foreseeable future, but their composition and manufacturing processes will inevitably have to change. Timber also will remain a major construction material, but sustainable sourcing is key and its utilisation as cross-lamination timber (CLT) or as modified timber is rapidly developing. As a result, students and practitioners must familiarise themselves with these materials, their composition, and various uses. The book goes on to describe variants of other traditional building products, such as glass, plastic and insulation, which are undergoing major developments leading towards enhanced environmental sustainability, as well as many emergent materials, some of which are likely to be significant in future. Modern Methods of Construction and Innovative Materials is the only book combining these important elements of the future of the industry in an easy-to-read guide for students and new practitioners. It is essential reading for anyone studying and working in the built environment, be they architects, construction managers, surveyors or engineers.
Download or read book Offsite Production and Manufacturing for Innovative Construction written by Jack S. Goulding and published by Routledge. This book was released on 2019-06-19 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: The offsite and modular market is continuing to grow. This book builds on the success of a number of initiatives, including formative findings from literature, research and development and practice-based evidence (success stories). It presents new thinking and direction from leading experts in the fields of: design, process, construction, engineering, manufacturing, logistics, robotics, delivery platforms, business and transformational strategies, change management, legislation, organisational learning, software design, innovation and biomimetics. This book is particularly novel and timely, as it brings together a number of cogent subjects under one collective ‘umbrella’. Each of these chapters contain original findings, all of which culminate in three 'Key Learning Points' which provide new insight into the cross-cutting themes, interrelationships and symbiotic forces that exist between each of these chapters. This approach also provides readers with new contextualised understanding of the wider issues affecting the offsite market, from the need to embrace societal challenges, through to the development of rich value-laden solutions required for creating sector resilience. Content includes a balance between case studies and practice-based work, through to technical topics, theoretical propositions, pioneering research and future offsite opportunities ready for exploitation. This work includes: stakeholder integration, skills acquisition, new business models and processes, circularity and sustainable business strategies, robotics and automation, innovation and change, lean production methodologies and new construction methods, Design for Manufacturing and Assembly, scaled portfolio platforms and customisability, new legal regulatory standards and conformance issues and offsite feasibility scenario development/integration.
Download or read book Offsite Architecture written by Ryan E. Smith and published by Routledge. This book was released on 2017-03-16 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Architects have been intrigued by prefabricated construction since the early twentieth century. Recent advances in design, engineering and manufacturing processes have led to a significant expansion in the use of pre-assembled components, which are fitted to finished structures on site. Collectively, such processes are becoming known as "offsite construction." A ground-breaking text, Offsite Architecture establishes the current – and future – state of thinking in this field. A range of the most highly regarded thinkers and practitioners from around the globe share their ideas and practical findings on offsite prefabrication, examining theory and practice, opportunities and challenges, successes and failures. A timely response to the growing interest in this method, the book provides the fundamental basis for a critical, reflective approach to offsite architecture. Contributions from both academics and professionals make Offsite Architecture required reading for practitioners as well as students taking courses in architecture, prefabrication, construction and engineering.
Download or read book Modern Methods of Construction written by and published by . This book was released on 2016 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Designing Timber Buildings written by Fausto Sanna and published by The Crowood Press. This book was released on 2022-10-24 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last three decades, timber architecture has seen a resurgence in popularity thanks to the level of innovation, experimentation and environmental responsiveness it engenders. Designing Timber Buildings offers a comprehensive overview of timber as a construction material, in addition to practical design guidance. A series of ten exemplary case studies of award-winning timber building from around the world inform and inspire the design process. Topics covered include: the physical and mechanical properties of wood; preservative treatments; modified timber and engineered-timber products; environmental aspects of timber buildings and finally, structural systems and constructional techniques, including timber frame, structural insulated panels and cross-laminated timber. This book is richly illustrated throughout with detailed drawings and photographs documenting projects from construction to completion.
Download or read book Prefab Architecture written by Ryan E. Smith and published by John Wiley & Sons. This book was released on 2011-06-03 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Prefab Architecture . . . is beyond theory, and beyond most of what we think we know about pods, containers, mods, and joints. This book is more than 'Prefabrication 101.' It is the Joy of Cooking writ large for the architecture and construction industries." From the Foreword by James Timberlake, FAIA THE DEFINITIVE REFERENCE ON PREFAB ARCHITECTURE FOR ARCHITECTS AND CONSTRUCTION PROFESSIONALS Written for architects and related design and construction professionals, Prefab Architecture is a guide to off-site construction, presenting the opportunities and challenges associated with designing and building with components, panels, and modules. It presents the drawbacks of building in situ (on-site) and demonstrates why prefabrication is the smarter choice for better integration of products and processes, more efficient delivery, and realizing more value in project life cycles. In addition, Prefab Architecture provides: A selected history of prefabrication from the Industrial Revolution to current computer numerical control, and a theory of production from integrated processes to lean manufacturing Coverage on the tradeoffs of off-site fabrication including scope, schedule, and cost with the associated principles of labor, risk, and quality Up-to-date products featuring examples of prefabricated structure, enclosure, service, and nterior building systems Documentation on the constraints and execution of manufacturing, factory production, transportation, and assembly Dozens of recent examples of prefab projects by contemporary architects and fabricators including KieranTimberlake, SHoP Architects, Office dA, Michelle Kaufmann, and many others In Prefab Architecture, the fresh approaches toward creating buildings that accurately convey ature and expanded green building methodologies make this book an important voice for adopting change in a construction industry entrenched in traditions of the past.
Download or read book Materials and Joints in Timber Structures written by Simon Aicher and published by Springer Science & Business Media. This book was released on 2013-09-25 with total page 815 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the contributions from the RILEM International Symposium on Materials and Joints in Timber Structures that was held in Stuttgart, Germany from October 8 to 10, 2013. It covers recent developments in the materials and the joints used in modern timber structures. Regarding basic wooden materials, the contributions highlight the widened spectrum of products comprising cross-laminated timber, glulam and LVL from hardwoods and block glued elements. Timber concrete compounds, cement bonded wood composites and innovative light-weight constructions represent increasingly employed alternatives for floors, bridges and facades. With regard to jointing technologies, considerable advances in both mechanical connections and glued joints are presented. Self-tapping screws have created unprecedented options for reliable, strong as well as ductile joints and reinforcement technologies. Regarding adhesives, which constitute the basis of the jointing/laminating technology of modern timber products, extended options for tailor-made bonding solutions have to be stated. Apart from melamine-urea and phenolic-resorcinol adhesives, one-component-polyurethanes, emulsion isocyanate polymers and epoxies offer a wide range of possibilities. The contributions dealing with experimental and numerical investigations on static, cyclic and seismic behavior of structures clearly reveal the enhanced potential of modern timber construction for reliable and sustainable buildings and bridges of the new millennium. The book is structured in nine thematic areas, being I) Structures II) Mechanical Connections III) Glued Joints and Adhesives IV) Timber and Concrete/Cement/Polymer Composites V) Cyclic, Seismic Behavior VI) Hardwood, Modified Wood and Bamboo VII) Cross-Laminated Timber VIII) Properties and Testing of Wood IX) Glulam
Download or read book The Development of Modern Methods of Timber House Construction written by J. D. Boyd and published by . This book was released on 1959 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rethinking Wood written by Markus Hudert and published by Birkhäuser. This book was released on 2019-04-18 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in the materials and the digitalization of architecture bring about new methods in design and construction. Whereas traditional timber construction consists of pre-cut and pre-assembled timber sections, modern timber buildings today consist of elaborate wood-based materials. Owing to their flexibility and good properties in terms of building physics and ecology, these wood-based materials are ideal for computer-aided building component production. Fifteen case examples from research, teaching, and practical applications provide inspiring insights into the potential of formable wood-based materials and digital design: Woven Wood, Wood Foam, Living Wood and Organic Joints, Timber Joints for Robotic Building Processes, Efficiencies of Wood, Designing with Tree Form.
Download or read book Barry s Introduction to Construction of Buildings written by Stephen Emmitt and published by John Wiley & Sons. This book was released on 2010-02-15 with total page 769 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of Barry’s Introduction to Construction of Buildings adds considerable new material but remains based on the original concept of explaining construction technology through key functional/performance requirements for the main elements common to all buildings. Of particular note in this new edition are a fully integrated approach to environmental issues and construction sustainability. The rest of the material has been updated as required, with particular attention paid to the illustrations. With over 150 new photographs and many revised figures, plus a supporting website at www.wiley.com/go/barrysintroduction, students learning the fundamentals of building and construction on undergraduate and other NQF level 5 - 6 courses will find this the ideal introduction to the subject.
Download or read book Timber Frame Construction written by Jack A. Sobon and published by Storey Publishing, LLC. This book was released on 2012-12-10 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the satisfaction of making your own durable, economical, and environmentally friendly timber frame structures. Covering all aspects of timber frame construction, this practical guide is filled with easy-to-understand instructions, clear illustrations, and helpful photographs. With expert advice on selecting appropriate timber, necessary tools, safety considerations, joinery techniques, assembly, and raising, Jack Sobon and Roger Schroeder encourage beginners by offering complete plans for a small toolshed. Turn your dream of a timber frame house into a reality.
Download or read book Materials for Architects and Builders written by Arthur Lyons and published by Routledge. This book was released on 2019-08-28 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Architects and Builders provides a clear and concise introduction to the broad range of materials used within the construction industry and covers the essential details of their manufacture, key physical properties, specification and uses. Understanding the basics of materials is a crucial part of undergraduate and diploma construction or architecture-related courses, and this established textbook helps the reader to do just that with the help of colour photographs and clear diagrams throughout. This new sixth edition has been completely revised and updated to include the latest developments in materials research, new images, appropriate technologies and relevant legislation. The ecological effects of building construction and lifetime use remain an important focus, and this new edition includes a wide range of energy-saving building components.
Download or read book Introduction to Construction Management written by Fred Sherratt and published by Taylor & Francis. This book was released on 2022-09-29 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Construction Management, Second Edition, is the beginner’s guide to key concepts, terms, processes and practices associated with modern construction management. The new edition has been fully updated with new data, case studies and enhancements and remains the most practical and accessible book on the subject available. Significant new topics have been added including construction ethics, coverage of mental health and wellbeing in the industry, project delivery and Construction 4.0, to make this the most cutting-edge book available for students on construction and engineering management courses. Supported by diagrams, illustrations and case studies, the book starts with a general introduction to the industry and covers the relevant management theory before providing applied coverage of: Production management Commercial management Quality management Health and Safety management Environmental management This is the most approachable text available for anyone starting to learn about construction management at any level.
Download or read book Timber Construction Manual written by American Institute of Timber Construction (AITC) and published by John Wiley & Sons. This book was released on 2012-07-31 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: THE DEFINITIVE DESIGN AND CONSTRUCTION INDUSTRY SOURCE FOR BUILDING WITH WOOD NOW IN A THOROUGHLY UPDATED SIXTH EDITION Since its first publication in 1966, Timber Construction Manual has become the essential design and construction industry resource for building with structural glued laminated timber. Timber Construction Manual, Sixth Edition provides architects, engineers, contractors, educators, and related professionals with up-to-date information on engineered timber construction, including the latest codes, construction methods, and authoritative design recommendations. Content has been reorganized to flow easily from information on wood properties and applications to specific design considerations. Based on the most reliable technical data available, this edition has been thoroughly revised to encompass: A thorough update of all recommended design criteria for timber structural members, systems, and connections An expanded collection of real-world design examples supported with detailed schematic drawings New material on the role of glulam in sustainable building practices The latest design and construction codes, including the 2012 National Design Specification for Wood Construction, AITC 117-2010, and examples featuring ASCE 7-10 and IBC 2009 More cross-referencing to other available AITC standards on the AITC website Since 1952, the AMERICAN INSTITUTE OF TIMBER CONSTRUCTION has been the national technical trade association of the structural glued laminated timber industry. AITC-recommended building and design codes for wood-based structures are considered authoritative in the United States building industry.
Download or read book Emerging Research in Sustainable Energy and Buildings for a Low Carbon Future written by Robert J. Howlett and published by Springer Nature. This book was released on 2021-02-06 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains an introduction and 20 studies, each describing a recent research investigation in the area of sustainable and resilient buildings, built environment infrastructure and renewable energy. Contributions are from many different countries of the world and on a range of topics, representing a sample of research within the ‘sustainable energy and buildings’ field. The book begins with chapters on the sustainable design of buildings, followed by descriptions of issues relating to the renovation, restoration and reconstruction of existing buildings, or in one case a railway wagon. The next part of the book covers factors that form barriers or impediments to low or zero carbon buildings, followed by studies of issues relating to policy and certification. There then follow four chapters on various topics related to sustainable buildings – undergraduate courses, insurance issues, biophilia relating to buildings and thermal conductivity measurement. There are several chapters relating to renewable energy, followed by two chapters with a sustainable transport theme, one relating to electric vehicles, and the other about a sustainable road infrastructure. The final chapter is on the manufacture of sustainable building components for the UK housing sector. The book is of use to engineers, scientists, researchers, practitioners, academics and all those who are interested to develop and use sustainability science and technology for the betterment of our planet and humankind, and to mitigate climate change reality.
Download or read book Efficient and Sustainable Wood based Constructions written by Ing. Jozef Švajlenka and published by Springer Nature. This book was released on 2022-01-04 with total page 113 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book brings together surveys and analyses that increase awareness of wooden buildings in terms of sustainability and the benefits offered by modern wood-based construction systems in terms of building efficiency. The volume’s contribution to the understanding of efficient and sustainable wood-based constructions arises from the explanation of the authors’ methodology for the evaluation of sustainability and efficiency within selected phases of the life cycle of buildings, a technique that can be used for the evaluation of different types of structural systems and their comparison from various perspectives.
