Download or read book Occipational Health and Safelty in the Chemical and Biological Laboratory written by Maria Pai Gatto and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Occupational health and safety refers to the whole series of prevention measures and protection, technical measures, organizational solutions, and procedures that must be adopted by the employer to avoid dangerous situations for their employees. While it is true that total security exists in the absence of dangers, and this is a difficult concept to translate into real life, in the absolute sense, it is also true that the application of safety rules makes the occurrence of adverse events and incidents more difficult, and it always results in a better quality of life. Each analytical laboratory should provide its own "Good Laboratory Practices" and procedures must be the result of the experience and must be known, correctly interpreted, shared, and respected by all the staff of laboratory.The idea of creating a manual on occupational health risks in a chemical and biological analysis laboratory derives from the need to provide technical support for the various figures involved in activities requiring the safe use of chemical and biological agents in lab analysis. The purpose of this work is to provide workers with more detailed information on the main possible causes of risk in an analysis laboratory, as well as on the most appropriate means of individual and collective protection to be used at work. The manual also gives an overview of main laboratory safety standards pertaining to clothing and equipment as well as procedures and lab design.This manual can be a valuable approach to knowledge of laboratory risks in order to eliminate or at least minimize them. Finally, the handbook can also be a support to the drafting of internal safety standards, both for general and specific procedures.
Download or read book Occipational Health and Safelty in the Chemical and Biological Laboratory written by Maria Pai Gatto and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Occupational health and safety refers to the whole series of prevention measures and protection, technical measures, organizational solutions, and procedures that must be adopted by the employer to avoid dangerous situations for their employees. While it is true that total security exists in the absence of dangers, and this is a difficult concept to translate into real life, in the absolute sense, it is also true that the application of safety rules makes the occurrence of adverse events and incidents more difficult, and it always results in a better quality of life. Each analytical laboratory should provide its own "Good Laboratory Practices" and procedures must be the result of the experience and must be known, correctly interpreted, shared, and respected by all the staff of laboratory.The idea of creating a manual on occupational health risks in a chemical and biological analysis laboratory derives from the need to provide technical support for the various figures involved in activities requiring the safe use of chemical and biological agents in lab analysis. The purpose of this work is to provide workers with more detailed information on the main possible causes of risk in an analysis laboratory, as well as on the most appropriate means of individual and collective protection to be used at work. The manual also gives an overview of main laboratory safety standards pertaining to clothing and equipment as well as procedures and lab design.This manual can be a valuable approach to knowledge of laboratory risks in order to eliminate or at least minimize them. Finally, the handbook can also be a support to the drafting of internal safety standards, both for general and specific procedures.
Download or read book Handbook of Chemical Health and Safety written by Robert J. Alaimo and published by . This book was released on 2001 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides information on proper chemcial equipment handling including, purchasing, storage, use, and disposal.
Download or read book Occupational Health and Safety in the Care and Use of Research Animals written by Committee on Occupational Safety and Health in Research Animal Facilities and published by National Academies Press. This book was released on 1997-06-23 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: Much has been written about the care of research animals. Yet little guidance has appeared on protecting the health and safety of the people who care for or use these animals. This book, an implementation handbook and companion to Guide For the Care and Use of Laboratory Animals, identifies principles for building a program and discusses the accountability of institutional leaders, managers, and employees for a program's success. It provides a detailed description of risks-- physical and chemical hazards, allergens and zoonoses, and hazards from experiments--which will serve as a continuing reference for the laboratory. The book offers specific recommendations for controlling risk through administrative procedures, facility design, engineering controls, and periodic evaluations. The volume focuses on the worker, with detailed discussions of work practices, the use of personal protective gear, and the development of an emergency response plan. This handbook will be invaluable to administrators, researchers, and employees in any animal research facility. It will also be of interest to personnel in zoos, animal shelters, and veterinary facilities.
Download or read book Laboratory Safety Theory and Practice written by Anthony Fuscaldo and published by Elsevier. This book was released on 2012-12-02 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laboratory Safety: Theory and Practice focuses on theoretical aspects of the hazards the students, technicians, and scientists encounter in the laboratory. It presents methods of risk assessment that can be applied to technologies as they are translated from the scientist’s mind to the laboratory bench. It is organized into three sections designated as General Laboratory Safety, Biological Laboratory Safety, and Medical and Psychological Factors. The first section, encompassing three chapters, discusses hazards found in almost all laboratories; pertinent safety theories and practices; ubiquitous compounds that are either toxic or carcinogenic and guidelines for their use; and radiation hazards. Chapters 4 to 7 focus on the safety in the biological laboratory. Discussions on relatively complex group of viruses, approach to recombinant DNA research, and awareness on the possible hazards associated with the field are included in this book. Chapters 6 and 7 present design and function of biohazard laboratories and the hazards relating to laboratory animals. The final section discusses medical surveillance of persons at risk and the psychological factors involved in accident control. It presents a comprehensive list of chemical agents, their sources, subsequent physical effects, and the accepted mode of medical surveillance. Various genetic screening tests and their potential use for the evaluation of presumptive and actual mutagens are also covered. This book is ideal for safety and design engineers, students, technicians, and scientists.
Download or read book Chemical Safety in the Laboratory written by Stephen K. Hall and published by CRC Press. This book was released on 2018-12-19 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nothing is more important to an organization than the health and safety of its workers. The managerial effectiveness of any health and safety program is judged on the basis of how well it prevents injuries and ill health. Chemical Safety in the Laboratory provides a proven approach to implementing and maintaining an effective chemical safety program for laboratories in hospital, industrial, and educational settings. Based on 20 years of experience managing and auditing chemical safety programs, the author discusses the OSHA Laboratory Standard and the Chemical Hygiene Plan, provides guidelines for the effective use of personal protective equipment, and details chemical emergency planning and response procedures. He also outlines a 19-step decontamination procedure for emergency responders. Employee chemical exposure monitoring and victim handling procedures are among the other major topics covered in this essential guide.
Download or read book Laboratory Safety for Chemistry Students written by Robert H. Hill, Jr. and published by John Wiley & Sons. This book was released on 2016-03-28 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides knowledge and models of good practice needed by students to work safely in the laboratory as they progress through four years of undergraduate laboratory work Aligns with the revised safety instruction requirements from the ACS Committee on Professional Training 2015 “Guidelines and Evaluation Procedures for Bachelor’s Degree Programs” Provides a systematic approach to incorporating safety and health into the chemistry curriculum Topics are divided into layers of progressively more advanced and appropriate safety issues so that some topics are covered 2-3 times, at increasing levels of depth Develops a strong safety ethic by continuous reinforcement of safety; to recognize, assess, and manage laboratory hazards; and to plan for response to laboratory emergencies Covers a thorough exposure to chemical health and safety so that students will have the proper education and training when they enter the workforce or graduate school
Download or read book Laboratory Safety Guidance written by United States. Occupational Safety and Health Administration and published by . This book was released on 2011 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Occupational Health and Safety in the Laboratory written by G. Fullick and published by . This book was released on 1996 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Occupational Health and Safety in the Laboratory is designed as a text for all students studying occupational safety or hygiene, and focuses on the particular aspects faced by laboratory workers. Specialist chapters on chemical, biological and radiation safety are provided, along with generic material such as fire and electrical safety, and first aid. Australian occupational health and safety legislation is covered in detail, as are methods of risk assessment and control." -back cover.
Download or read book Handbook of Chemical Health and Safety written by Robert J. Alaimo and published by . This book was released on 2001 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides information on proper chemcial equipment handling including, purchasing, storage, use, and disposal.
Download or read book Biosafety in the Laboratory written by Division on Engineering and Physical Sciences and published by National Academies Press. This book was released on 1989-01-01 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biosafety in the Laboratory is a concise set of practical guidelines for handling and disposing of biohazardous material. The consensus of top experts in laboratory safety, this volume provides the information needed for immediate improvement of safety practices. It discusses high- and low-risk biological agents (including the highest-risk materials handled in labs today), presents the "seven basic rules of biosafety," addresses special issues such as the shipping of dangerous materials, covers waste disposal in detail, offers a checklist for administering laboratory safetyâ€"and more.
Download or read book Safe Science written by National Research Council and published by National Academies Press. This book was released on 2014-10-08 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent serious and sometimes fatal accidents in chemical research laboratories at United States universities have driven government agencies, professional societies, industries, and universities themselves to examine the culture of safety in research laboratories. These incidents have triggered a broader discussion of how serious incidents can be prevented in the future and how best to train researchers and emergency personnel to respond appropriately when incidents do occur. As the priority placed on safety increases, many institutions have expressed a desire to go beyond simple compliance with regulations to work toward fostering a strong, positive safety culture: affirming a constant commitment to safety throughout their institutions, while integrating safety as an essential element in the daily work of laboratory researchers. Safe Science takes on this challenge. This report examines the culture of safety in research institutions and makes recommendations for university leadership, laboratory researchers, and environmental health and safety professionals to support safety as a core value of their institutions. The report discusses ways to fulfill that commitment through prioritizing funding for safety equipment and training, as well as making safety an ongoing operational priority. A strong, positive safety culture arises not because of a set of rules but because of a constant commitment to safety throughout an organization. Such a culture supports the free exchange of safety information, emphasizes learning and improvement, and assigns greater importance to solving problems than to placing blame. High importance is assigned to safety at all times, not just when it is convenient or does not threaten personal or institutional productivity goals. Safe Science will be a guide to make the changes needed at all levels to protect students, researchers, and staff.
Download or read book Laboratory Safety for Chemistry Students written by Robert H. Hill, Jr. and published by John Wiley & Sons. This book was released on 2011-09-21 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: "...this substantial and engaging text offers a wealth of practical (in every sense of the word) advice...Every undergraduate laboratory, and, ideally, every undergraduate chemist, should have a copy of what is by some distance the best book I have seen on safety in the undergraduate laboratory." Chemistry World, March 2011 Laboratory Safety for Chemistry Students is uniquely designed to accompany students throughout their four-year undergraduate education and beyond, progressively teaching them the skills and knowledge they need to learn their science and stay safe while working in any lab. This new principles-based approach treats lab safety as a distinct, essential discipline of chemistry, enabling you to instill and sustain a culture of safety among students. As students progress through the text, they’ll learn about laboratory and chemical hazards, about routes of exposure, about ways to manage these hazards, and about handling common laboratory emergencies. Most importantly, they’ll learn that it is very possible to safely use hazardous chemicals in the laboratory by applying safety principles that prevent and minimize exposures. Continuously Reinforces and Builds Safety Knowledge and Safety Culture Each of the book’s eight chapters is organized into three tiers of sections, with a variety of topics suited to beginning, intermediate, and advanced course levels. This enables your students to gather relevant safety information as they advance in their lab work. In some cases, individual topics are presented more than once, progressively building knowledge with new information that’s appropriate at different levels. A Better, Easier Way to Teach and Learn Lab Safety We all know that safety is of the utmost importance; however, instructors continue to struggle with finding ways to incorporate safety into their curricula. Laboratory Safety for Chemistry Students is the ideal solution: Each section can be treated as a pre-lab assignment, enabling you to easily incorporate lab safety into all your lab courses without building in additional teaching time. Sections begin with a preview, a quote, and a brief description of a laboratory incident that illustrates the importance of the topic. References at the end of each section guide your students to the latest print and web resources. Students will also find “Chemical Connections” that illustrate how chemical principles apply to laboratory safety and “Special Topics” that amplify certain sections by exploring additional, relevant safety issues. Visit the companion site at http://userpages.wittenberg.edu/dfinster/LSCS/.
Download or read book Improving Safety in the Chemical Laboratory written by Jay A. Young and published by Wiley-Interscience. This book was released on 1987 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This contributed volume provides much-needed practical information for setting up and operating a safe chemical laboratory. The reader will learn to discern whether close calls or non-events have happened, and how to identify and eliminate their causes. The book consists of five chapters. Chapter 1 covers organization for safety in laboratories. Chapter 2 describes precautionary labels, including OSHA, DOT, and other labeling systems, and material safety data sheets. Discussed in chapter 3 is the training and drill of staff, along with a selected bibliography. Chapter 4 covers the physical layout of the laboratory, including protective equipment, communication, ventilation, electrical hazards, storage, and emergencies. The last chapter rounds out the subject of accident prevention with a description of safety inspections and safety audits. Also contained are very extensive appendixes.
Download or read book Safe Handling of Radioactive Isotopes written by United States. National Committee on Radiation Protection and Measurements and published by . This book was released on 1949 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Safety in the Chemical Laboratory written by Norman V. Steere and published by . This book was released on 1967 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Prudent Practices in the Laboratory written by National Research Council and published by National Academies Press. This book was released on 2011-03-25 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prudent Practices in the Laboratory-the book that has served for decades as the standard for chemical laboratory safety practice-now features updates and new topics. This revised edition has an expanded chapter on chemical management and delves into new areas, such as nanotechnology, laboratory security, and emergency planning. Developed by experts from academia and industry, with specialties in such areas as chemical sciences, pollution prevention, and laboratory safety, Prudent Practices in the Laboratory provides guidance on planning procedures for the handling, storage, and disposal of chemicals. The book offers prudent practices designed to promote safety and includes practical information on assessing hazards, managing chemicals, disposing of wastes, and more. Prudent Practices in the Laboratory will continue to serve as the leading source of chemical safety guidelines for people working with laboratory chemicals: research chemists, technicians, safety officers, educators, and students.
