Download or read book Optimisation en sciences de l ing nieur M thodes exactes written by BORNE Pierre and published by Lavoisier. This book was released on 2013-03-01 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimisation en sciences de l’ingénieur présente les principales méthodes exactes d’optimisation statique et dynamique. Parmi les méthodes décrites, figurent : la programmation linéaire avec plusieurs implémentations et la programmation non linéaire, particulièrement détaillée compte tenu de la grande variété d’algorithmes existants ; la programmation dynamique avec divers exemples d’application ; les réseaux de Hopfield ; l’optimisation en identification des systèmes ; l’optimisation des systèmes dynamiques avec notamment l’application à la commande des processus, l’optimisation des systèmes de grandes dimensions et des systèmes d’information. Didactique, cet ouvrage propose des références permettant au lecteur d’approfondir les diverses méthodes traitées. Lorsque les algorithmes étudiés le permettent, sans trop agrandir les présentations, des exemples d’implémentation sont proposés.
Download or read book Saturated Control of Linear Systems written by Abdellah Benzaouia and published by Springer. This book was released on 2017-09-20 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with a combination of two main problems for the first time. They are saturation on control and on the rate (or increment) of the control, and the solution of unsymmetrical saturation on the control by LMIs. It treats linear systems in state space form, in both the continuous- and discrete-time domains. Necessary and sufficient conditions are derived for autonomous linear systems with constrained state increment or rate, such that the system evolves respecting incremental or rate constraints if any. A pole assignment technique is then used to solve the problem, giving stabilizing state feedback controllers that respect non-symmetrical constraints on control alone or on both control and its increment or rate. Illustrative examples show the application of these methods on academic examples or on such real plant models as the double integrator system. This problem is then extended to various others including: systems with constraints and perturbations; singular systems with constrained control; systems with unsymmetrical saturations; saturated systems with delay, and 2-D systems with saturations. The solutions obtained are of two types: necessary and sufficient conditions solved with linear programming techniques; and sufficient conditions under LMIs. A new approach extends existing techniques for dealing with symmetrical saturations to take direct account of unsymmetrical saturations into account with LMIs. This tool enables the authors to obtain new results on continuous- and discrete-time systems. The book uses illustrative examples and figures and provides many comparisons with existing results. Systems theoreticians interested in multidimensional systems and practitioners working with saturated and constrained controllers will find the research and background presented in Saturated Control of Linear Systems to be of considerable interest in helping them overcome problems with their plant and in stimulating further research.
Download or read book Journal de physique written by and published by . This book was released on 2002 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis and Control of Underactuated Mechanical Systems written by Amal Choukchou-Braham and published by Springer Science & Business Media. This book was released on 2013-11-18 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph provides readers with tools for the analysis, and control of systems with fewer control inputs than degrees of freedom to be controlled, i.e., underactuated systems. The text deals with the consequences of a lack of a general theory that would allow methodical treatment of such systems and the ad hoc approach to control design that often results, imposing a level of organization whenever the latter is lacking. The authors take as their starting point the construction of a graphical characterization or control flow diagram reflecting the transmission of generalized forces through the degrees of freedom. Underactuated systems are classified according to the three main structures by which this is found to happen—chain, tree, and isolated vertex—and control design procedures proposed. The procedure is applied to several well-known examples of underactuated systems: acrobot; pendubot; Tora system; ball and beam; inertia wheel; and robotic arm with elastic joint. The text is illustrated with MATLABsup®/sup/Simulink® simulations that demonstrate the effectiveness of the methods detailed./ppReaders interested in aircraft, vehicle control or various forms of walking robot will be able to learn from iUnderactuated Mechanical Systems
Download or read book Commande des proc d s 3e ed written by CORRIOU Jean-Pierre and published by Lavoisier. This book was released on 2012-09-11 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cette troisième édition a été enrichie par l'introduction de nouveaux exemples et de méthodes récentes. En un volume unique, le livre propose une synthèse progressive et approfondie des principales méthodes de commande exposées sous forme théorique et illustrées sur des exemples variés de procédés : réacteurs chimiques, biologiques, de polymérisation, craqueur catalytique, colonne de distillation. Les six parties couvrent la modélisation et la commande continue monovariable, la commande multivariable par fonction de transfert, l'identification et la commande en temps discret, la commande optimale et prédictive multivariable, la commande non linéaire et les observateurs d'état. Cet ouvrage s'adresse aussi bien aux étudiants de 2e et 3e cycle qu'aux chercheurs, enseignants et ingénieurs.
Download or read book Fiabilit diagnostic et maintenance des syst mes written by LYONNET Patrick and published by Lavoisier. This book was released on 2012-06-22 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Permettre de concevoir, développer et utiliser des systèmes de diagnostic, de surveillance et de maintenance prédictive pour systèmes complexes (avions, centrales nucléaires, transport, etc.), afin d'optimiser les performances de la sûreté de fonctionnement : tel est l'objectif de cet ouvrage. Pour cela Fiabilité, diagnostic et maintenance prédictive des systèmes s'appuie sur la modélisation des systèmes (parties commandes et opératives), l'évaluation probabiliste et déterministe du fonctionnement, et la conception de systèmes de surveillance. Cet ouvrage fait le lien entre le diagnostic, la maintenance et la fiabilité des systèmes techniques, du plus simple au plus complexe. Son approche novatrice et sa présentation en font un véritable guide théorique et pratique pour les ingénieurs qui pourront y trouver la réponse à de nombreux problèmes de diagnostic, de surveillance et de maintenance, en particulier grâce à l'analyse vibratoire. Très didactique et accompagné de plus de 100 exercices et problèmes résolus reflétant des situations concrètes, il présente les concepts de base pour concevoir et développer correctement des outils ou des systèmes de diagnostic et de maintenance conditionnelle (prédictive) indispensables aux ingénieurs ou aux élèves ingénieurs en génie industriel, génie mécanique, robotique ou sûreté de fonctionnement dans les domaines les plus variés.
Download or read book Control of Synchronous Motors written by Jean-Paul Louis and published by John Wiley & Sons. This book was released on 2013-02-07 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synchronous motors are indubitably the most effective device to drive industrial production systems and robots with precision and rapidity. Their control law is thus critical for combining at the same time high productivity to reduced energy consummation. As far as possible, the control algorithms must exploit the properties of these actuators. Therefore, this work draws on well adapted models resulting from the Park’s transformation, for both the most traditional machines with sinusoidal field distribution and for machines with non-sinusoidal field distribution which are more and more used in industry. Both, conventional control strategies like vector control (either in the synchronous reference frame or in the rotor frame) and advanced control theories like direct control and predictive control are thoroughly presented. In this context, a significant place is reserved to sensorless control which is an important and critical issue in tomorrow’s motors.
Download or read book Dynamique Non lin aire Et Le Chaos written by and published by . This book was released on 1993 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Digital Computer Applications to Process Control written by M. Paul and published by Elsevier. This book was released on 2016-11-04 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considers the application of modern control engineering on digital computers with a view to improving productivity and product quality, easing supervision of industrial processes and reducing energy consumption and pollution. The topics covered may be divided into two main subject areas: (1) applications of digital control - in the chemical and oil industries, in water turbines, energy and power systems, robotics and manufacturing, cement, metallurgical processes, traffic control, heating and cooling; (2) systems theoretical aspects of digital control - adaptive systems, control aspects, multivariable systems, optimization and reliability, modelling and identification, real-time software and languages, distributed systems and data networks. Contains 84 papers.
Download or read book AGARD Lecture Series written by North Atlantic Treaty Organization. Advisory Group for Aerospace Research and Development and published by . This book was released on 1993 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 4th IFAC IFIP International Conference on Digital Computer Applications to Process Control written by M. Mansour and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital computers have been used more and more to control different industrial processes during the last decade. As of today, many sy stems are designed to include a process control computer as a vital part. The use of computers has created a need for sophisticated me thods for the operation and supervision of complex industrial proces ses. To summarize the state of the art from the practical as well as from the theoretical point of view, the 4th IFACIIFIP International Conference on "Digital Computer Applications to Process Control" will be held at Zurich from March 19 to 22, 1974. The first two vo lumes of the proceedings contain the accepted papers submitted to the conference mentioned above. The papers are arranged according to the topics of the conference. A third volume will include the six follow ing survey papers: 1. Digital Control Algorithms Prof. A. P. Sage, Dallas Texas I USA 2. Interface Problems for Process Control Prof. T. J. Williams, Lafayette Indiana I USA 3. Software for Process Computers Dr. J. Gertler, Budapest I Hungary Dr. J. Sedlak, Prague I CSSR 4. Digital Computer Applications in Metallurgical Processes Mr. W. E. Miller, Salem I USA Mr. W. G. Wright, Schenectady I USA 5. Digital Computer Applications in Power Systems Mr. D. Ernst, Erlangen / FRG 6. Digital Computer Applications in Chemical and Oil Industries Dr. H.
Download or read book European Control Conference 1991 written by and published by European Control Association. This book was released on 1991-07-02 with total page 1012 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the European Control Conference 1991, July 2-5, 1991, Grenoble, France
Download or read book 40e anniversaire du Laboratoire de m canique appliqu e R Chal at written by Laboratoire de mécanique appliquée Raymond Chaléat and published by . This book was released on 2002 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Edition XII Worldwide Directory of Postgraduate Studies in Engineering and Technology 1997 98 written by and published by . This book was released on 1996 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Robotique flexible Manipulation multi chelle written by GROSSARD Mathieu and published by Lavoisier. This book was released on 2013-07-01 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Qu’il s’agisse de tâches de préhension versatile aux échelles du micromonde ou bien de tâches de manipulation fine ou dextre à une échelle dimensionnelle supérieure, la fonction de manipulation robotique nécessite l’utilisation de systèmes mécatroniques performants et précis. Dans la majorité des cas, ceux-ci mettent en jeu des mécanismes qui sont caractérisés par des phénomènes mécaniques de flexibilité. Ces phénomènes sont induits naturellement par l’emploi de certains composants technologiques constitutifs du système ou par la géométrie de certaines structures élancées. Il peut alors s’agir de micromanipulateurs à base de matériaux actifs, de bras manipulateurs légers, d’organes terminaux de préhension très intégrés sur le plan fonctionnel, voire de manipulateurs d’inspiration anthropomorphe. Aperçu des dernières avancées scientifiques et technologiques en la matière, cet ouvrage est destiné à toute personne intéressée par le champ de la robotique flexible et plus particulièrement par la manipulation.
Download or read book Robotics Concepts Methodologies Tools and Applications written by Management Association, Information Resources and published by IGI Global. This book was released on 2013-10-31 with total page 1801 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book explores some of the most recent developments in robotic motion, artificial intelligence, and human-machine interaction, providing insight into a wide variety of applications and functional areas"--Provided by publisher.
Download or read book Digital Computer Applications to Process Control written by and published by . This book was released on 1986 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt:
