Download or read book Object Oriented Parallel Particle in Cell Code for Beam Dynamics Simulation in Linear Accelerators written by and published by . This book was released on 1999 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this paper, we present an object-oriented three-dimensional parallel particle-in-cell code for beam dynamics simulation in linear accelerators. A two-dimensional parallel domain decomposition approach is employed within a message passing programming paradigm along with a dynamic load balancing. Implementing object-oriented software design provides the code with better maintainability, reusability, and extensibility compared with conventional structure based code. This also helps to encapsulate the details of communications syntax. Performance tests on SGI/Cray T3E-900 and SGI Origin 2000 machines show good scalability of the object-oriented code. Some important features of this code also include employing symplectic integration with linear maps of external focusing elements and using z as the independent variable, typical in accelerators. A successful application was done to simulate beam transport through three superconducting sections in the APT linac design.
Download or read book Particle Beam Dynamics Simulations Using the POOMA Framework written by and published by . This book was released on 1998 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: A program for simulation of the dynamics of high intensity charged particle beams in linear particle accelerators has been developed in C++ using the POOMA Framework, for use on serial and parallel architectures. The code models the trajectories of charged particles through a sequence of different accelerator beamline elements such as drift chambers, quadrupole magnets, or RF cavities. An FFT-based particle-in-cell algorithm is used to solve the Poisson equation that models the Coulomb interactions of the particles. The code employs an object-oriented design with software abstractions for the particle beam, accelerator beamline, and beamline elements, using C++ templates to efficiently support both 2D and 3D capabilities in the same code base. The POOMA Framework, which encapsulates much of the effort required for parallel execution, provides particle and field classes, particle-field interaction capabilities, and parallel FFT algorithms. The performance of this application running serially and in parallel is compared to an existing HPF implementation, with the POOMA version seen to run four times faster than the HPF code.
Download or read book Computing in Object Oriented Parallel Environments written by Denis Caromel and published by Springer. This book was released on 2003-07-31 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the Proceedings of the International Symposium on C- puting in Object-Oriented Parallel Environments (ISCOPE ’98), held at Santa 1 Fe, New Mexico, USA on December 8{11, 1998. ISCOPE is in its second year, and continues to grow both in attendance and in the diversity of the subjects covered. ISCOPE’97 and its predecessor conferences focused more narrowly on scienti c computing in the high-performance arena. ISCOPE ’98 retains this emphasis, but has broadened to include discrete-event simulation, mobile c- puting, and web-based metacomputing. The ISCOPE ’98 Program Committee received 39 submissions, and acc- ted 10 (26%) as Regular Papers, based on their excellent content, maturity of development, and likelihood for widespread interest. These 10 are divided into three technical categories. Applications: The rst paper describes an approach to simulating advanced nuclear power reactor designs that incorporates multiple local solution - thods and a natural extension to parallel execution. The second paper disc- ses a Time Warp simulation kernel that is highly con gurable and portable. The third gives an account of the development of software for simulating high-intensity charged particle beams in linear particle accelerators, based on the POOMA framework, that shows performance considerably better than an HPF version, along with good parallel speedup.
Download or read book Physics Of High Brightness Beams 2nd Icfa Advanced Accelerator Workshop written by James B Rosenzweig and published by World Scientific. This book was released on 2000-12-18 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of the 1999 ICFA workshop on the physics of high brightness beams. The workshop took a snapshot in time of a fast moving, interdisciplinary field driven by advanced applications such as high gradient, high energy physics linear colliders, high gain free electron lasers, heavy ion fusion, and transmutation of nuclear materials. While the field of high brightness beam physics has traditionally been divided into disparate electron and heavy ion communities, the workshop brought the two types of researchers together, so that a sharing of insights and methods could be achieved. Thus, this book represents a unifying step in the development of the diverse fascinating discipline of high brightness beam physics, with its challenges rooted in collective, nonlinear particle motion and ultra-high electromagnetic energy density.
Download or read book Physics and Technology of Linear Accelerator Systems written by Helmut Wiedemann and published by World Scientific. This book was released on 2004 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is useful to people working or planning to work in the field of linear accelerators. It is a good reference, presenting the most recent advances in the field. The intended audience are researchers, practitioners, academics and graduate students. The proceedings have been selected for coverage in: . OCo Index to Scientific & Technical Proceedings (ISTP CDROM version / ISI Proceedings). OCo CC Proceedings OCo Engineering & Physical Sciences."
Download or read book Benchmark of the IMPACT Code for High Intensity Beam DynamicsSimulation written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The IMPACT (Integrated Map and Particle Accelerator Tracking) code was first developed under Computational Grand Challenge project in the mid 1990s [1]. It started as a three-dimensional (3D) data parallel particle-in-cell (PIC) code written in High Performance Fortran. The code used a split-operator based method to solve the Hamiltonian equations of motion. It contained linear transfer maps for drifts, quadrupole magnets and rf cavities. The space-charge forces were calculated using an FFT-based method with 3D open boundary conditions and longitudinal periodic boundary conditions. This code was completely rewritten in the late 1990s based on a message passing parallel programming paradigm using Fortran 90 and MPI following an object-oriented software design. This improved the code's scalability on large parallel computer systems and also gave the code better software maintainability and extensibility [2]. In the following years, under the SciDAC-1 accelerator project, the code was extended to include more accelerating and focusing elements such as DTL, CCL, superconducting linac, solenoid, dipole, multipoles, and others. Besides the original split-operator based integrator, a direct integration of Lorentz equations of motion using a leap-frog algorithm was also added to the IMPACT code to handle arbitrary external nonlinear fields. This integrator can read in 3D electromagnetic fields in a Cartesian grid or in a cylindrical coordinate system. Using the Lorentz integrator, we also extended the original code to handle multiple charge-state beams. The space-charge solvers were also extended to include conducting wall effects for round and rectangular pipes with longitudinal open and periodic boundary conditions. Recently, it has also been extended to handle short-range wake fields (longitudinal monopole and transverse dipole) and longitudinal coherent synchrotron radiation wake fields. Besides the parallel macroparticle tracking code, an rf linac lattice design code, an envelope matching and analysis code, and a number of pre- and post-processing codes were also developed to form the IMPACT code suite. The IMPACT code suite has been used to study beam dynamics in the SNS linac, the J-PARC linac commissioning, the CERN superconducting linac design, the Los Alamos Low Energy Demonstration Accelerator (LEDA) halo experiment, the Rare Isotope Accelerator (RIA) driver linac design, and the FERMI@Elettra FEL linac design [3-8]. It has also been used to study space-charge resonance in anisotropic beams [9-11].
Download or read book Nonlinear Dynamics And Collective Effects In Particle Beam Physics Proceedings Of The International Committee On Future Accelerators Arcidosso Italy 2017 written by Swapan Chattopadhyay and published by World Scientific. This book was released on 2019-01-18 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book of proceedings is an up-to-date review of the advances made in the past two decades on the production, control and exploitation of bright electron and light beams for science — in particular, innovative manipulation and control, in linear and circular accelerators, of high brightness charged particle beams. In the conceptual, theoretical and experimental framework of nonlinear beam dynamics and collective cooperative effects, the book provides an update of the state-of-the-art theoretical formulations, techniques and technologies, innovative concepts and scientific results obtained at existing accelerator facilities. Challenges and solutions, proposed or implemented, for the operation of third and fourth generation storage rings as synchrotron radiation sources and circular colliders for high energy particle physics, as well as radiofrequency linear accelerators for Compton/Thomson scattering-based light sources and free electron lasers, are reviewed and discussed. The complementarity between single-pass and recirculating light sources in energy, timing and spectral operational modes also emerges.
Download or read book Space Charge Physics for Particle Accelerators written by Ingo Hofmann and published by Springer. This book was released on 2017-09-20 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding and controlling the physics of space charge effects in linear and circular proton and ion accelerators are essential to their operation, and to future high-intensity facilities. This book presents the status quo of this field from a theoretical perspective, compares analytical approaches with multi-particle computer simulations and – where available – with experiments. It discusses fundamental concepts of phase space motion, matched beams and modes of perturbation, along with mathematical models of analysis – from envelope to Vlasov-Poisson equations. The main emphasis is on providing a systematic description of incoherent and coherent resonance phenomena; parametric instabilities and sum modes; mismatch and halo; error driven resonances; and emittance exchange due to anisotropy, as well as the role of Landau damping. Their distinctive features are elaborated in the context of numerous sample simulations, and their potential impacts on beam quality degradation and beam loss are discussed. The book is intended for advanced beginners in accelerator research, and for experts interested in the mechanisms of direct space charge interaction and their modeling.
Download or read book Computational Science ICCS 2002 written by Peter M.A. Sloot and published by Springer. This book was released on 2003-08-01 with total page 1265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Science is the scientific discipline that aims at the development and understanding of new computational methods and techniques to model and simulate complex systems. The area of application includes natural systems - such as biology environ mental and geo-sciences, physics, and chemistry - and synthetic systems such as electronics and financial and economic systems. The discipline is a bridge bet ween 'classical' computer science - logic, complexity, architecture, algorithm- mathematics, and the use of computers in the aforementioned areas. The relevance for society stems from the numerous challenges that exist in the various science and engineering disciplines, which can be tackled by advances made in this field. For instance new models and methods to study environmental issues like the quality of air, water, and soil, and weather and climate predictions through simulations, as well as the simulation-supported development of cars, airplanes, and medical and transport systems etc. Paraphrasing R. Kenway (R.D. Kenway, Contemporary Physics. 1994): 'There is an important message to scientists, politicians, and industrialists: in the future science, the best industrial design and manufacture, the greatest medical progress, and the most accurate environmental monitoring and forecasting will be done by countries that most rapidly exploit the full potential of computational science'. Nowadays we have access to high-end computer architectures and a large range of computing environments, mainly as a consequence of the enormous sti mulus from the various international programs on advanced computing, e.g.
Download or read book Computational Science and Its Applications ICCSA 2017 written by Osvaldo Gervasi and published by Springer. This book was released on 2017-07-13 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt: The six-volume set LNCS 10404-10409 constitutes the refereed proceedings of the 17th International Conference on Computational Science and Its Applications, ICCSA 2017, held in Trieste, Italy, in July 2017. The 313 full papers and 12 short papers included in the 6-volume proceedings set were carefully reviewed and selected from 1052 submissions. Apart from the general tracks, ICCSA 2017 included 43 international workshops in various areas of computational sciences, ranging from computational science technologies to specific areas of computational sciences, such as computer graphics and virtual reality. Furthermore, this year ICCSA 2017 hosted the XIV International Workshop On Quantum Reactive Scattering. The program also featured 3 keynote speeches and 4 tutorials.
Download or read book Supercomputing Frontiers written by Rio Yokota and published by Springer. This book was released on 2018-03-20 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: It constitutes the refereed proceedings of the 4th Asian Supercomputing Conference, SCFA 2018, held in Singapore in March 2018. Supercomputing Frontiers will be rebranded as Supercomputing Frontiers Asia (SCFA), which serves as the technical programme for SCA18. The technical programme for SCA18 consists of four tracks: Application, Algorithms & Libraries Programming System Software Architecture, Network/Communications & Management Data, Storage & Visualisation The 20 papers presented in this volume were carefully reviewed nd selected from 60 submissions.
Download or read book Computational Science and Its Applications ICCSA 2016 written by Osvaldo Gervasi and published by Springer. This book was released on 2016-07-01 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: The five-volume set LNCS 9786-9790 constitutes the refereed proceedingsof the 16th International Conference on Computational Science and ItsApplications, ICCSA 2016, held in Beijing, China, in July 2016. The 239 revised full papers and 14 short papers presented at 33 workshops were carefully reviewed and selected from 849 submissions. They are organized in five thematical tracks: computational methods, algorithms and scientific applications; high performance computing and networks; geometric modeling, graphics and visualization; advanced and emerging applications; and information systems and technologies.
Download or read book Visualization Handbook written by Charles D. Hansen and published by Academic Press. This book was released on 2005 with total page 1062 pages. Available in PDF, EPUB and Kindle. Book excerpt: A picture can communicate a thousand words ... this book gives new meaning to the phrase!
Download or read book Beam Halo Dynamics Diagnostics and Collimation written by Jie Wei and published by American Institute of Physics. This book was released on 2003-12-17 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book documents comprehensive reviews and state-of-the-art studies in the dynamics, diagnostics, and collimation of charged-particle beam halo and in beam-beam interaction. Challenges and solutions to major accelerator facilities in Europe, Asia, and America in the domain of high intensity, high energy, and high brightness charged particles are presented. Latest breakthroughs in physical analysis, engineering design, and experimental tests are included.
Download or read book Simulation of Ion Optics Using Particle in cell and Treecode Methods written by Jerold William Emhoff and published by . This book was released on 2005 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Science ICCS written by and published by . This book was released on 2002 with total page 1282 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book SELF CONSISTENT LANGEVIN SIMULATION OF COULOMB COLLISIONS IN CHARGED PARTICLE BEAMS written by and published by . This book was released on 2000 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: In many plasma physics and charged-particle beam dynamics problems, Coulomb collisions are modeled by a Fokker-Planck equation. In order to incorporate these collisions, we present a three-dimensional parallel Langevin simulation method using a Particle-In-Cell (PIC) approach implemented on high-performance parallel computers. We perform, for the first time, a fully self-consistent simulation, in which the friction and diffusion coefficients are computed from first principles. We employ a two-dimensional domain decomposition approach within a message passing programming paradigm along with dynamic load balancing. Object oriented programming is used to encapsulate details of the communication syntax as well as to enhance reusability and extensibility. Performance tests on the SGI Origin 2000 and the Cray T3E-900 have demonstrated good scalability. Work is in progress to apply our technique to intrabeam scattering in accelerators.
