Download or read book Earthquake Design Practice for Buildings written by David Key and published by Thomas Telford. This book was released on 1988 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Illustrated and with a large number of photographs, diagrams and graphs, this title is a sound guide not only to the practising engineer who is unfamiliar with the concepts of seismic design but also to those familiar with the concepts but who want a concise design guide to what is sound engineering practice.

Download or read book Critical comparison of major seismic codes for buildings written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2013-01-01 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: fib Bulletin 69 illustrates and compares major buildings seismic codes applied in the different Continents, namely U.S., Japan, New Zealand, Europe, Canada, Chile and Mexico. Bulletin 69 was prepared by Task Group 7.6 of fib Commission 7, under the leadership of the late Professor Robert (Bob) Park which, in tandem with Professor Paulay, had developed in the seventies new fundamental design concepts, most notably capacity design approach and structural design for ductility, that had made the NZ seismic Code the most advanced one of the time. This new approach has highly influenced the development of Eurocode 8, to which Bob Park has significantly contributed. Bob Park was also well informed of the situation in Japan, USA, Canada and South America. Such a wide view is reflected in Bulletin 69 showing similarities and differences among the major seismic codes, accompanied as far as possible by comments, hopefully useful for fostering international harmonization. A comprehensive summary of the major codes is provided in the first chapter of the bulletin. All codes are separately presented according to a common framework: an introduction section, which describes the history, the philosophy, the process development, the performance-based criteria, the strength of materials and the incorporation of strength reduction factors of each code; a second section devoted to the demand side, which specify the seismic design actions and associated criteria of each code for areas of different seismicity and for structures with different ductility properties/requirements; a third section devoted to the capacity side, which describes the capacities of members and joints and associated criteria of each code, including member strengths in flexure, shear and bars anchorage, desirable hierarchies of strength attainment, deformation capacities of mechanisms of inelastic deformation, detailing of beams, columns and structural walls, detailing of beam-column joints for shear and the detailing of diaphragms. The second chapter is devoted to the comparison of the more significant issues dealt in the considered codes. This includes: seismic design actions and associated criteria, capacity design practice, beams, columns, confinement, structural walls and joints. It is felt that fib Bulletin 69 represents a useful, unique instrument for rapidly gaining an overview of the distinguishing features of the major world codes, under both their conceptual framework and application rules.

Download or read book Developments in Mechanics of Structures and Materials written by Andrew J. Deeks and published by Taylor & Francis Group. This book was released on 2005 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Seismic Design and Practice into the Next Century written by Edmund Booth and published by Routledge. This book was released on 2022-05-04 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers, from 18 countries in Europe and elsewhere, contain discussions of quite radical innovations in material technology, design philosophy, experimental techniques and analytical approaches that will affect seismic design practice into the next century. Papers are organised into 9 sections: Ground motion and seismic hazard studies; Seismic design of foundations; Seismic design of steel, concrete and masonry buildings; Seismic design of offshore, nuclear and petrochemical installations; Seismic design of bridges, dock and power station structures; Repair and strengthening of bridges and buildings; Active and passive methods of seismic control; Dynamic testing methods; Seismic codes of practice. The proceedings will provide essential material for all those from both industrial and research organisations needing to keep in touch with the state-of-the-art in earthquake engineering and related earch sciences.

Download or read book Fourth International Conference on Current and Future Trends in Bridge Design Construction and Maintenance written by B. Barr and published by Thomas Telford. This book was released on 2006 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a state-of-the-art reference, an exchange of innovative experience, creative thinking and industry forecasts. This volume presents the proceedings of the fourth international conference in this series based in the Asia Pacific region, in Kuala Lumpur in October 2005 and is applicable to all sectors of the bridge engineering community. BACKGROUND KNOWLEDGE AND FUTURE PERFORMANCE The Institution of Civil Engineers has collaborated with internationally renowned bridge engineers to organise three successful conferences to celebrate the enormous achievements made in the field of bridge engineering in recent years. As a discipline, bridge engineering not only requires knowledge and experience of bridge design and construction techniques but must also deal with increasing challenges posed by the need to maintain the long-term performance of structures throughout an extended service life. In many parts of the world natural phenomena such as seismic events can cause significant damage to force major repairs or reconstruction. Therefore, it is appropriate that the first plenary session of this conference is entitled Engineering for Seismic Performance. READERSHIP This compilation of papers will benefit practising civil and structural engineers in consulting firms and government agencies, bridge contractors, research institutes, universities and colleges. In short, it is of importance to all engineers involved in any aspect of the design, construction and repair, maintenance and refurbishment of bridges.

Download or read book Particle Packing Method for Recycled Aggregate Concrete written by Subhasis Pradhan and published by Springer Nature. This book was released on with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Earthquake Resistant Design and Risk Reduction written by David J. Dowrick and published by John Wiley & Sons. This book was released on 2009-07-20 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake Resistant Design and Risk Reduction, 2nd edition is based upon global research and development work over the last 50 years or more, and follows the author’s series of three books Earthquake Resistant Design, 1st and 2nd editions (1977 and 1987), and Earthquake Risk Reduction (2003). Many advances have been made since the 2003 edition of Earthquake Risk Reduction, and there is every sign that this rate of progress will continue apace in the years to come. Compiled from the author’s wide design and research experience in earthquake engineering and engineering seismology, this key text provides an excellent treatment of the complex multidisciplinary process of earthquake resistant design and risk reduction. New topics include the creation of low-damage structures and the spatial distribution of ground shaking near large fault ruptures. Sections on guidance for developing countries, response of buildings to differential settlement in liquefaction, performance-based and displacement-based design and the architectural aspects of earthquake resistant design are heavily revised. This book: Outlines individual national weaknesses that contribute to earthquake risk to people and property Calculates the seismic response of soils and structures, using the structural continuum “Subsoil – Substructure – Superstructure – Non–structure” Evaluates the effectiveness of given design and construction procedures for reducing casualties and financial losses Provides guidance on the key issue of choice of structural form Presents earthquake resistant design methods for the main four structural materials – steel, concrete, reinforced masonry and timber – as well as for services equipment, plant and non-structural architectural components Contains a chapter devoted to problems involved in improving (retrofitting) the existing built environment This book is an invaluable reference and guiding tool to practising civil and structural engineers and architects, researchers and postgraduate students in earthquake engineering and engineering seismology, local governments and risk management officials.

Download or read book Seismic Design Methodologies for the Next Generation of Codes written by P. Fajfar and published by Routledge. This book was released on 2019-09-10 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings, arising from an international workshop, present research results and ideas on issues of importance to seismic risk reduction and the development of future seismic codes.

Download or read book Performance Based Seismic Engineering Vision for an Earthquake Resilient Society written by Matej Fischinger and published by Springer. This book was released on 2014-07-15 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Bled workshops have traditionally produced reference documents providing visions for the future development of earthquake engineering as foreseen by leading researchers in the field. The participants of the 2011 workshop built on the tradition of these events initiated by Professors Fajfar and Krawinkler to honor their important research contributions and have now produced a book providing answers to crucial questions in today’s earthquake engineering: “What visible changes in the design practice have been brought about by performance-based seismic engineering? What are the critical needs for future advances? What actions should be taken to respond to those needs?” The key answer is that research interests should go beyond the narrow technical aspects and that the seismic resilience of society as a whole should become an essential part of the planning and design process. The book aims to provide essential guidelines for researchers, professionals and students in the field of earthquake engineering. It will also be of particular interest for all those working at insurance companies, governmental, civil protection and emergency management agencies that are responsible for assessing and planning community resilience. The introductory chapter of the book is based on the keynote presentation given at the workshop by the late Professor Helmut Krawinkler. As such, the book includes Helmut’s last and priceless address to the engineering community, together with his vision and advice for the future development of performance-based design, earthquake engineering and seismic risk management.

Download or read book Precast concrete buildings in seismic areas written by FIB – Féd. Int. du Béton and published by FIB - Féd. Int. du Béton. This book was released on 2016 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document has a broad scope and is not focussed on design issues. Precast construction under seismic conditions is treated as a whole. The main principles of seismic design of different structural systems, their behavior and their construction techniques are presented through rules, construction steps and sequences, procedures, and details that should lead to precast structures built in seismic areas complying with the fundamental performance requirements of collapse prevention and life safety in major earthquakes and limited damage in more frequent earthquakes. The content of this document is largely limited to conventional precast construction and, although some information is provided on the well-known “PRESSS technology” (jointed ductile dry connections), this latter solution is not treated in detail in this document. The general overview, contained in this document, of alternative structural systems and connection solutions available to achieve desired performance levels, intends to provide engineers, architects, clients, and end-users (in general) with a better appreciation of the wide range of applications that modern precast concrete technology can have in various types of construction from industrial to commercial as well as residential. Lastly, the emphasis on practical aspects, from conceptual design to connection detailing, aims to help engineers to move away from the habit of blindly following prescriptive codes in their design, but instead go back to basic principles, in order to achieve a more robust understanding, and thus control, of the seismic behaviour of the structural system as a whole, as well as of its components and individual connections.

Download or read book Response Control and Seismic Isolation of Buildings written by Masahiko Higashino and published by Routledge. This book was released on 2006-09-27 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This state of the art report from an international task group (TG44) of CIB, the International Council of Building Research Organizations, presents a highly authoritative guide to the application of innovative technologies on response control and seismic isolation of buildings to practice worldwide. Many countries and cities are located in earthquake-prone areas making effective seismic design a major issue in structural engineering. Reassuringly, structural response control and seismic isolation have advanced remarkably in recent years following numerous studies internationally. Several major conferences have been held and reports have been written but little has been issued on the application of the technologies to good structural engineering practice. Plugging that gap, Response Control and Seismic Isolation of Buildings presents researchers in structural engineering (dynamics) and construction management with up-to-date applications of the latest technologies.

Download or read book Earthquake Resistant Concrete Structures written by Andreas Kappos and published by CRC Press. This book was released on 2014-04-21 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces practising engineers and post-graduate students to modern approaches to seismic design, with a particular focus on reinforced concrete structures, earthquake resistant design of new buildings and assessment, repair and strengthening of existing buildings.

Download or read book Seismic Retrofit of Existing Reinforced Concrete Buildings written by Stelios Antoniou and published by John Wiley & Sons. This book was released on 2023-04-24 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismic Retrofit of Existing Reinforced Concrete Buildings Understand the complexities and challenges of retrofitting building infrastructure Across the world, buildings are gradually becoming structurally unsound. Many were constructed before seismic load capacity was a mandatory component of building standards, and were often built with low-quality materials or using unsafe construction practices. Many more are simply aging, with materials degrading, and steel corroding. As a result, efforts are ongoing to retrofit existing structures, and to develop new techniques for assessing and enhancing seismic load capacity in order to create a safer building infrastructure worldwide. Seismic Retrofit of Existing Reinforced Concrete Buildings provides a thorough book-length discussion of these techniques and their applications. Balancing theory and practice, the book provides engineers with a broad base of knowledge from which to approach real-world seismic assessments and retrofitting projects. It incorporates knowledge and experience frequently omitted from the building design process for a fuller account of this critical engineering subfield. Seismic Retrofit of Existing Reinforced Concrete Buildings readers will also find: Detailed treatment of each available strengthening technique, complete with advantages and disadvantages In-depth guidelines to select a specific technique for a given building type and/or engineering scenario Step-by-step guidance through the assessment/retrofitting process Seismic Retrofit of Existing Reinforced Concrete Buildings is an ideal reference for civil and structural engineering professionals and advanced students, particularly those working in seismically active areas.

Download or read book Earthquake Risk Reduction written by David J. Dowrick and published by John Wiley & Sons. This book was released on 2003-09-12 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encompassing theory and field experience, this book covers all the main subject areas in earthquake risk reduction, ranging from geology, seismology, structural and soil dynamics to hazard and risk assessment, risk management and planning, engineering and the architectural design of new structures and equipment. Earthquake Risk Reduction outlines individual national weaknesses that contribute to earthquake risk to people and property; calculates the seismic response of soils and structures, using the structural continuum 'Subsoil - Substructure - Superstructure - Non-structure'; evaluates the effectiveness of given designs and construction procedures for reducing casualties and financial losses; provides guidance on the key issue of choice of structural form; presents earthquake resistant designs methods for the four main structural materials - steel, concrete, reinforced masonry and timber - as well as for services equipment, plant and non-structural architectural components; contains a chapter devoted to problems involved in improving (retrofitting) the existing built environment. Compiled from the author's extensive professional experience in earthquake engineering, this key text provides an excellent treatment of the complex multidisciplinary process of earthquake risk reduction. This book will prove an invaluable reference and guiding tool to practicing civil and structural engineers and architects, researchers and postgraduate students in seismology, local governments and risk management officials.

Download or read book Artificial Intelligence and Machine Learning Techniques for Civil Engineering written by Plevris, Vagelis and published by IGI Global. This book was released on 2023-06-05 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, artificial intelligence (AI) has drawn significant attention with respect to its applications in several scientific fields, varying from big data handling to medical diagnosis. A tremendous transformation has taken place with the emerging application of AI. AI can provide a wide range of solutions to address many challenges in civil engineering. Artificial Intelligence and Machine Learning Techniques for Civil Engineering highlights the latest technologies and applications of AI in structural engineering, transportation engineering, geotechnical engineering, and more. It features a collection of innovative research on the methods and implementation of AI and machine learning in multiple facets of civil engineering. Covering topics such as damage inspection, safety risk management, and information modeling, this premier reference source is an essential resource for engineers, government officials, business leaders and executives, construction managers, students and faculty of higher education, librarians, researchers, and academicians.

Download or read book Handbook of Structural Engineering written by W.F. Chen and published by CRC Press. This book was released on 2005-02-28 with total page 1765 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuing the best-selling tradition of the Handbook of Structural Engineering, this second edition is a comprehensive reference to the broad spectrum of structural engineering, encapsulating the theoretical, practical, and computational aspects of the field. The contributors cover traditional and innovative approaches to analysis, design, and rehabilitation. New topics include: fundamental theories of structural dynamics; advanced analysis; wind- and earthquake-resistant design; design of prestressed structures; high-performance steel, concrete, and fiber-reinforced polymers; semirigid frame structures; structural bracing; and structural design for fire safety.

Download or read book Structural Steel Semirigid Connections written by Ciro Faella and published by CRC Press. This book was released on 1999-10-27 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the semirigidity concept was introduced many years ago, steel structures are usually designed by assuming that beam-to-column joints are either pinned or rigid. Theses assumptions allow a great simplification in structural analysis and design-but they neglect the true behavior of joints. The economic and structural benefits of semirigid joints are well known and much has been written about their use in braced frames. However, they are seldom used by designers, because most semirigid connections have highly nonlinear behavior, so that the analysis and design of frames using them is difficult. In fact, the design problem becomes more difficult as soon as the true rotational behavior of beam-to-column joints is accounted for-the design problem requires many attempts to achieve a safe and economical solution. Structural Steel Semirigid Connections provides a comprehensive source of information on the design of semirigid frames, up to the complete detailing of beam-to-column connections, and focuses on the prediction of the moment-rotation curve of connections. This is the first work that contains procedures for predicting the connection plastic rotation supply-necessary for performing the local ductility control in nonlinear static and dynamic analyses. Extensive numerical examples clarify the practical application of the theoretical background. This exhaustive reference and the awareness it provides of the influence of joint rotational behavior on the elastic and inelastic responses of structures will greatly benefit researchers, professionals, and specification writing bodies devoted to structural steel.