Download or read book NX 9 for Beginners written by CADFolks and published by Onlineinstructor. This book was released on 2014-06-04 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: If you want to learn NX for designing mechanical parts and assemblies, then this is the book for you. You will learn to use commands and techniques in NX by following step-by-step examples. This book covers everything from creating 3D parts and assemblies to creating print-ready drawings. The topics covered in this book are illustrated with the help of real world examples such as brackets, pressure cylinders, vices, plastic bottle, and more. Also, this book is well organized and can be used for a course or self-study. • Get familiar with user interface • Create 3D parts and assemble them • Work with multibody parts • Modify parts using Synchronous Modeling tools • Create Inter-part relations in an assembly • Design and document sheet metal parts • Design complex shapes using surface modeling tools Table of Contents 1. Getting Started with NX 9 2. Sketch Techniques 3. Extrude and Revolve Features 4. Placed Features 5. Patterned Geometry 6. Additional Features and Multibody Parts 7. Modifying Parts 8. Assemblies 9. Drawings 10. Sheet Metal Design 11. Surface Design

Download or read book NX 2021 For Beginners written by Tutorial Books and published by Tutorial Books. This book was released on 2021-05-11 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: NX For Beginners introduces you to the basics of NX by using step-by-step instructions. You begin with a brief introduction to NX and the User Interface, ribbon, environments, commands, and various options. Within a short time, you will learn to create 2D sketches that form the basis for 3D models. You will learn to sketch on three different planes (Front, Top and Right planes). You will use various sketching tools such as line, rectangle, and circle. You will also learn to modify sketches using tools such as trim, extend, and fillet. Learn to use geometric constraints and dimensions to achieve a definite shape and size of the sketch. You convert the sketches into 3D features such as Extrude and Revolve. You combine or subtract features to achieve the final part. You can also add placed features (sketch fewer features) such as Fillets and Holes to the 3D geometry. You explore mirroring and patterning commands to create repetitive features. You will learn to use some additional modeling tools and work with multi-body parts. Learn to modify part geometry by editing sketches and feature parameters. You explore Synchronous Modeling tools to change the Part geometry by modifying its faces. You build assemblies after creating parts. There are two methods to build assemblies: Bottom-up and Top-down. In the Bottom-up approach, you bring all the components together and add constraints between them. In the Top-down approach, you create parts at the assembly level. You explode assemblies to show how they were assembled. You create Drawings of the parts and assemblies. You insert part views and add dimensions and annotations to complete the drawing. In the case of assembly drawings, you insert assembly views, add Bill of Materials, Balloons, and Revision table. The Sheet Metal design chapter covers various tools used to build sheet metal parts from scratch. You will also learn to convert an existing part geometry into a sheet metal part. You also create flat patterns and 2D sheet metal drawings. The Surface design chapter covers the surface modeling tools that are used to create complex shapes. The NX Realize Shape chapter covers the freeform modeling tools. Table of Contents 1. Getting Started with NX 2. Sketch Techniques 3. Extrude and Revolve Features 4. Placed Features 5. Patterned Geometry 6. Additional Features and Multibody Parts 7. Modifying Parts 8. Assemblies 9. Drawings 10. Sheet Metal Design 11. Surface Design 12. NX Realize Shape

Download or read book NX 9 Tutorial written by Online Instructor and published by Online Instructor. This book was released on 2014-06-19 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This tutorial book provides a systematic approach for users to learn NX 9. It is aimed for those with no previous experience with NX. However, users of previous versions of NX may also find this book useful for them to learn the new enhancements. The user will be guided from starting a NX 9 session to constructing parts, assemblies, and drawings. Each chapter has components explained with the help of various dialogs and screen images. Visit https://www.onlineinstructor.org for more help and resource files.

Download or read book Siemens NX 2021 for Designers 14th Edition written by Prof. Sham Tickoo and published by CADCIM Technologies. This book was released on 2021-05-28 with total page 1410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Siemens NX 2021 for Designers is a comprehensive book that introduces the users to feature-based 3D parametric solid modeling using the NX software. The book covers all major environments of NX with a thorough explanation of all tools, options, and their applications to create real-world products. More than 40 mechanical engineering industry examples and additional 35 exercises given in the book ensure that the users properly understand the solid modeling design techniques used in the industry and are able to efficiently create parts, assemblies, drawing views with bill of materials as well as learn the editing techniques that are essential to make a successful design. In this edition, four industry-specific projects are also provided for free download to the users to practice the tools learned and enhance their skills.

Download or read book Parametric Modeling with NX 9 written by Randy Shih and published by SDC Publications. This book was released on 2014 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary goal of Parametric Modeling with NX 9 is to introduce the aspects of designing with Solid Modeling and Parametric Modeling. This text is intended to be used as a practical training guide for students and professionals. This text uses NX 9 as the modeling tool, and the chapters proceed in a pedagogical fashion to guide you from constructing basic solid models to building intelligent mechanical designs, creating multi-view drawings and assembly models. This text takes a hands-on, exercise-intensive approach to all the important Parametric Modeling techniques and concepts. This textbook contains a series of thirteen tutorial style lessons designed to introduce beginning CAD users to NX. This text is also helpful to NX users upgrading from a previous release of the software. The solid modeling techniques and concepts discussed in this text are also applicable to other parametric feature-based CAD packages. The basic premise of this book is that the more designs you create using NX, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons. This book does not attempt to cover all of the NX’s features, only to provide an introduction to the software. It is intended to help you establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering.

Download or read book Nx 12 for Beginners written by Tutorial Books and published by Createspace Independent Publishing Platform. This book was released on 2018-05-03 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: NX 12 For Beginners introduces you to the basics of NX 12 by using step-by-step instructions. You begin with brief introduction to NX 12 and the User Interface, ribbon, environments, commands, and various options. Within a short time, you will learn to create 2D sketches that form the basis for 3D models. You will learn to sketch on three different planes (Front, Top and Right planes). You will use various sketching tools such as line, rectangle, circle, and so on. You will also learn to modify sketches using tools such as trim, extend, fillets, and so on. Learn to use geometric constraints and dimensions to achieve a definite shape and size of the sketch. Sketches are converted into 3D features such as Extrude, Revolve, and so on. You combine or subtract features to achieve the final part. You can also add placed features (sketch less features) such as Fillets, and Holes to the 3D geometry. You explore mirroring and patterning commands to create repetitive features. You will learn to use some additional modeling tools and work with multi-body parts. Learn to modify part geometry by editing sketches and feature parameters. You explore Synchronous Modeling tools to modify the Part geometry by modifying its faces. You build assemblies after creating parts. There are two methods to build assemblies: Bottom-up and Top-down. In the Bottom-up method, you bring all the parts together and add constraints between them. In the Top-down method, you create parts in the assembly level. You explode assemblies to show the manner in which they were assembled. You create Drawings of the parts and assemblies. You insert part views and add dimensions and annotations to complete the drawing. In case of assembly drawings, you insert assembly views, add Bill of Materials, Balloons, and Revision table. The Sheet Metal design chapter covers various tools used to build sheet metal parts from scratch. You will also learn to convert an existing part geometry into sheet metal part. You also create flat patterns and 2D sheet metal drawings. The Surface design chapter covers the surface modeling tools that are used to create complex shapes. The NX Realize Shape chapter covers the freeform modeling tools. Table of Contents . Getting Started with NX 12 2. Sketch Techniques 3. Extrude and Revolve Features 4. Placed Features 5. Patterned Geometry 6. Additional Features and Multibody Parts 7. Modifying Parts 8. Assemblies 9. Drawings 10. Sheet Metal Design 11. Surface Design 12. NX Realize Shape If you are an educator, you can request a free evaluation copy by sending us an email to [email protected]

Download or read book Nx 11 Tutorial written by Online Instructor and published by Createspace Independent Publishing Platform. This book was released on 2016-10-08 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: NX 11 Tutorial is written to help new users to learn the basics of NX and some advanced solid modeling techniques. The Author guides readers through NX 11 with clear and step-by-step tutorials that help you to design solid models from day one. The first four chapters of this book cover the user interface, part modeling, assemblies, and drawings. After learning the basics, you can learn additional sketching tools, feature modeling tools, expressions, sheet metal modeling, some advanced assembly techniques, drawing annotations, and simulation basics. Table of Contents 1. Getting Started 2. Modeling Basics 3. Constructing Assembly 4. Generating Drawings 5. Sketching 6. Additional Modeling Tools 7. Top Down Assembly 8. Dimensions and Annotations 9. Simulation Hands on Tutorial Download Resource files from: http: //onlineinstructor.org/book/nx-11-tutorial

Download or read book Nx 11 Tutorial written by Tutorial Books and published by . This book was released on 2016-10-05 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: NX 11 Tutorial is written to help new users to learn the basics of NX and some advanced solid modeling techniques. The Author guides readers through NX 11 with clear and step-by-step tutorials that help you to design solid models from day one. The first four chapters of this book cover the user interface, part modeling, assemblies, and drawings. After learning the basics, you can learn additional sketching tools, feature modeling tools, expressions, sheet metal modeling, some advanced assembly techniques, drawing annotations, and simulation basics. Table of Contents 1. Getting Started 2. Modeling Basics 3. Constructing Assembly 4. Generating Drawings 5. Sketching 6. Additional Modeling Tools 7. Top Down Assembly 8. Dimensions and Annotations 9. Simulation Hands on Tutorial Download Resource files from: http://onlineinstructor.org/book/nx-11-tutorial

Download or read book Siemens NX 10 Nastran written by Jaecheol Koh and published by onsia. This book was released on 2017-02-09 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook explains how to perform computer aided analysis by using NX 10 Advanced Simulation with NX Nastran solver. It starts with analyzing a cantilevered beam and builds up the reader’s understanding of the concepts and process of structural analysis. Each chapter contains a typical example of analysis and is followed by a quiz to summarize the topics. In addition to the tutorial in each chapter, more commands and concepts are explained at the end of the chapter to help improve the reader’s understanding. The method for concluding an analysis is presented at the end of the tutorial for typical cases.Topics covered in this textbook - Chapter 1 through 3: Introducing NX 10 and Basic Modeling Techniques. - Chapter 4: Cantilevered Beam - Chapter 5: Effect of Fillet - Chapter 6: Effect of Stiffener - Chapter 7: Subcase and Symmetry - Chapter 8: Static Equilibrium and Singularity - Chapter 9: Using Coordinate System in Constraining - Chapter 10: Using 2D Elements - Chapter 11: Using 1D Elements - Chapter 12: Analysis of Truss Structure - Chapter 13: Connecting 2D Meshes - Chapter 14: Using 1D and 2D Meshes - Chapter 15: Using 1D and 3D Meshes - Chapter 16: Analyzing Alternator Bracket - Chapter 17: Contact Analysis - Chapter 18: Analyzing Bearing and Housing - Chapter 19: Spot Welding and Bolt Connection - Chapter 20: Analysis of Press Fit - Chapter 21: Quality of Elements - Chapter 22: Buckling Analysis - Chapter 23: Modal Analysis - Chapter 24: Thermal Analysis - Chapter 25: Fatigue Analysis

Download or read book Nx 10 for Beginners written by Tutorial Books and published by CreateSpace. This book was released on 2015-08-16 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: NX 10 For Beginners introduces you to the basics of NX 10 by using step-by-step instructions. You begin with brief introduction to NX 10 and the User Interface, ribbon, environments, commands, and various options. Within a short time, you will learn to create 2D sketches that form the basis for 3D models. You will learn to sketch on three different planes (Front, Top and Right planes). You will use various sketching tools such as line, rectangle, circle, and so on. You will also learn to modify sketches using tools such as trim, extend, fillets, and so on. Learn to use geometric constraints and dimensions to achieve a definite shape and size of the sketch. Sketches are converted into 3D features such as Extrude, Revolve, and so on. You combine or subtract features to achieve the final part. You can also add placed features (sketch less features) such as Fillets, and Holes to the 3D geometry. You explore mirroring and patterning commands to create repetitive features. You will learn to use some additional modeling tools and work with multi-body parts. Learn to modify part geometry by editing sketches and feature parameters. You explore Synchronous Modeling tools to modify the Part geometry by modifying its faces. You build assemblies after creating parts. There are two methods to build assemblies: Bottom-up and Top-down. In the Bottom-up method, you bring all the parts together and add constraints between them. In the Top-down method, you create parts in the assembly level. You explode assemblies to show the manner in which they were assembled. You create Drawings of the parts and assemblies. You insert part views and add dimensions and annotations to complete the drawing. In case of assembly drawings, you insert assembly views, add Bill of Materials, Balloons, and Revision table. The Sheet Metal design chapter covers various tools used to build sheet metal parts from scratch. You will also learn to convert an existing part geometry into sheet metal part. You also create flat patterns and 2D sheet metal drawings. Finally, you explore the surface modeling tools used to create complex shapes. Table of Contents 1. Getting Started with NX 10 2. Sketch Techniques 3. Extrude and Revolve Features 4. Placed Features 5. Patterned Geometry 6. Additional Features and Multibody Parts 7. Modifying Parts 8. Assemblies 9. Drawings 10. Sheet Metal Design 11. Surface Design

Download or read book Parametric Modeling with Siemens NX Spring 2019 Edition written by Randy Shih and published by SDC Publications. This book was released on 2019-05 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary goal of Parametric Modeling with Siemens NX is to introduce the aspects of designing with Solid Modeling and Parametric Modeling. This text is intended to be used as a practical training guide for students and professionals. This text uses Siemens NX as the modeling tool, and the chapters proceed in a pedagogical fashion to guide you from constructing basic solid models to building intelligent mechanical designs, creating multi-view drawings and assembly models. This text takes a hands-on, exercise-intensive approach to all the important Parametric Modeling techniques and concepts. This textbook contains a series of fifteen tutorial style lessons designed to introduce beginning CAD users to NX. This text is also helpful to NX users upgrading from a previous release of the software. The solid modeling techniques and concepts discussed in this text are also applicable to other parametric feature-based CAD packages. The basic premise of this book is that the more designs you create using NX, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons. This book does not attempt to cover all of NX’s features, only to provide an introduction to the software. It is intended to help you establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering. This book also introduces you to the general principles of 3D printing including a brief history of 3D printing, the types of 3D printing technologies, commonly used filaments, and the basic procedure for printing a 3D model. 3D printing makes it easier than ever for anyone to start turning their designs into physical objects, and by the end of this book you will be ready to start printing out your own designs.

Download or read book NX 11 for Beginners written by Tutorial Books and published by Createspace Independent Publishing Platform. This book was released on 2017-01-09 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: NX 11 For Beginners introduces you to the basics of NX 11 by using step-by-step instructions. You begin with brief introduction to NX 11 and the User Interface, ribbon, environments, commands, and various options. Within a short time, you will learn to create 2D sketches that form the basis for 3D models. You will learn to sketch on three different planes (Front, Top and Right planes). You will use various sketching tools such as line, rectangle, circle, and so on. You will also learn to modify sketches using tools such as trim, extend, fillets, and so on. Learn to use geometric constraints and dimensions to achieve a definite shape and size of the sketch. Sketches are converted into 3D features such as Extrude, Revolve, and so on. You combine or subtract features to achieve the final part. You can also add placed features (sketch less features) such as Fillets, and Holes to the 3D geometry. You explore mirroring and patterning commands to create repetitive features. You will learn to use some additional modeling tools and work with multi-body parts. Learn to modify part geometry by editing sketches and feature parameters. You explore Synchronous Modeling tools to modify the Part geometry by modifying its faces. You build assemblies after creating parts. There are two methods to build assemblies: Bottom-up and Top-down. In the Bottom-up method, you bring all the parts together and add constraints between them. In the Top-down method, you create parts in the assembly level. You explode assemblies to show the manner in which they were assembled. You create Drawings of the parts and assemblies. You insert part views and add dimensions and annotations to complete the drawing. In case of assembly drawings, you insert assembly views, add Bill of Materials, Balloons, and Revision table. The Sheet Metal design chapter covers various tools used to build sheet metal parts from scratch. You will also learn to convert an existing part geometry into sheet metal part. You also create flat patterns and 2D sheet metal drawings. Finally, you explore the surface modeling tools used to create complex shapes. Table of Contents 1. Getting Started with NX 11 2. Sketch Techniques 3. Extrude and Revolve Features 4. Placed Features 5. Patterned Geometry 6. Additional Features and Multibody Parts 7. Modifying Parts 8. Assemblies 9. Drawings 10. Sheet Metal Design 11. Surface Design If you are an educator, you can request a free evaluation copy by sending us an email to [email protected]

Download or read book Nx 12 Tutorial written by Online Instructor and published by Createspace Independent Publishing Platform. This book was released on 2018-03-17 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: NX 12 Tutorial is written to help new users to learn the basics of NX and some advanced solid modeling techniques. The Author guides readers through NX 12 with clear and step-by-step tutorials that help you to design solid models from day one. The first four chapters of this book cover the user interface, part modeling, assemblies, and drawings. After learning the basics, you can learn additional sketching tools, feature modeling tools, expressions, sheet metal modeling, some advanced assembly techniques, drawing annotations, simulation basics, PMI, and rendering. Table of Contents 1. Getting Started 2. Modeling Basics 3. Constructing Assembly 4. Generating Drawings 5. Sketching 6. Additional Modeling Tools 7. Expressions 8. Sheet Metal Modeling 9. Top Down Assembly 10. Dimensions and Annotations 11. Simulation Hands on Tutorial 12. Product and Manufacturing Information 13. Visualization and Rendering Download Resource files from: http: //onlineinstructor.org/book/nx-12-tutorial

Download or read book Siemens NX 12 0 for Designers 11th Edition written by Prof. Sham Tickoo and published by CADCIM Technologies. This book was released on 2018 with total page 881 pages. Available in PDF, EPUB and Kindle. Book excerpt: Siemens NX 12.0 for Designers is a comprehensive book that introduces the users to feature based 3D parametric solid modeling using the NX 12.0 software. The book covers all major environments of NX with a thorough explanation of all tools, options, and their applications to create real-world products. In this book, about 39 mechanical engineering industry examples are used as tutorials and an additional 34 as exercises to ensure that the users can relate their knowledge and understand the design techniques used in the industry to design a product. After reading the book, the user will be able to create parts, assemblies, drawing views with bill of materials, and learn the editing techniques that are essential to make a successful design. Also, in this book, the author emphasizes on the solid modeling techniques that improve the productivity and efficiency of the user. Salient Features: Consists of 16 chapters that are organized in a pedagogical sequence. Comprehensive coverage of NX 12.0 concepts and techniques. Tutorial approach to explain the concepts of NX 12.0. Hundreds of illustrations for easy understanding of concepts. More than 39 real-world mechanical engineering designs as tutorials, 34 as exercises, and projects with step-by-step explanation. Additional information throughout the book in the form of notes and tips. Self-Evaluation Tests and Review Questions at the end of each chapter to help the users assess their knowledge. Technical support by contacting '[email protected]'. Additional learning resources at 'allaboutcadcam.blogspot.com'. Table of Contents Chapter 1: Introduction to NX 12.0 Chapter 2: Drawing Sketches for Solid Models Chapter 3: Adding Geometric and Dimensional Constraints to Sketches Chapter 4: Editing, Extruding, and Revolving Sketches Chapter 5: Working with Datum Planes, Coordinates Systems, and Datum Axes Chapter 6: Advanced Modeling Tools-I Chapter 7: Advanced Modeling Tools-II Chapter 8: Assembly Modeling-I Chapter 9: Assembly Modeling-II Chapter 10: Surface Modeling Chapter 11: Advanced Surface Modeling Chapter 12: Generating, Editing, and Dimensioning the Drawing Views Chapter 13: Synchronous Modeling Chapter 14: Sheet Metal Design Chapter 15: Introduction to Injection Mold Design (For Free Download) Chapter 16: Concepts of Geometric Dimensioning and Tolerancing (For Free Download) Index

Download or read book A Beginner s Guide to Structural Equation Modeling written by Randall E. Schumacker and published by Routledge. This book was released on 2012-10-12 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook presents a basic introduction to structural equation modeling (SEM) and focuses on the conceptual steps to be taken in analysing conceptual models.

Download or read book SIEMENS NX 12 Design Fundamentals written by Jaecheol Koh and published by onsia. This book was released on 2018-07-08 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook explains how to create solid models, assemblies and drawings using Sie- mens NX 12. NX is a three dimensional CAD/CAM/CAE software developed by Siemens PLM Software Inc., Germany. This textbook is based on NX 12. Users of earlier releases can use this book with minor modifications. We provide files for exercises via our web- site. Almost all files are in NX 6.0 so readers can open the files using NX 6.0 and later releases. It is assumed that readers of this textbook have no prior experience in using Siemens NX for modeling 3D parts. This textbook is suitable for anyone interested in learning 3D modeling using Siemens NX. Each chapter deals with the major functions of creating 3D features using simple exam- ples and step by step, self-paced exercises. Additional drawings of 3D parts are provided at the end of each chapter for further self exercises. The final exercises are expected to be completed by readers who have fully understood the content and completed the exercises in each chapter. Topics covered in this textbook - Chapter 1: Basic components of Siemens NX 12, options and mouse operations. - Chapter 2: Basic step by step modeling process of NX 12. - Chapter 3 and 4: Creating sketches and sketch based features. - Chapter 5: Usage of datums to create complex 3D geometry. - Chapter 6: Additional modeling commands such as fillet, chamfer, draft and shell. - Chapter 7: Modification of 3D parts to take advantage of parametric modeling concepts. - Chapter 8: Copying features, modeling objects and bodies. - Chapter 9: Additional modeling commands such as trim body, tube, sweep along guide, emboss and various commands in synchronous modeling. - Chapter 10: Advanced sketch commands. - Chapter 11: Measuring and verifying 3D geometries. - Chapter 12 and 13: Constructing assembly structures and creating or modifying 3D parts in the context of assembly. - Chapter 14 and 15: Creating drawings for parts or assemblies. - Appendix A: Selecting Objects

Download or read book NX 12 Tutorial written by Online Instructor and published by . This book was released on 2019-07-02 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: NX 12 Tutorial is written to help new users to learn the basics of NX and some advanced solid modeling techniques. The Author guides readers through NX 12 with clear and step-by-step tutorials that help you to design solid models from day one. The first four chapters of this book cover the user interface, part modeling, assemblies, and drawings. After learning the basics, you can learn additional sketching tools, feature modeling tools, expressions, sheet metal modeling, some advanced assembly techniques, drawing annotations, simulation basics, PMI, and rendering.